Shamanches Posted June 6, 2016 Share Posted June 6, 2016 i'm needed create software Wireless Access Point with OrangePI PC+RTL8188CU? Link to comment Share on other sites More sharing options...
tkaiser Posted June 6, 2016 Share Posted June 6, 2016 Does this help http://forum.armbian.com/index.php/topic/1237-tutorial-opi-one-wireless-success/ ? Link to comment Share on other sites More sharing options...
rodolfo Posted June 7, 2016 Share Posted June 7, 2016 Does this help http://forum.armbian.com/index.php/topic/1237-tutorial-opi-one-wireless-success/ ? @shamanches Please read exact instructions on tested working dongles and capabilities in suggested link. Good luck. Link to comment Share on other sites More sharing options...
y52 Posted September 25, 2016 Share Posted September 25, 2016 I am running Armbian on OPI+ and BPI. How is it possible to add the second wireless interface bound to the same physical WiFi adapter? The goal is to configure the wlan0 in AP mode with hostapd and wlan1 in managed mode with wpa_supplicant, I need to redistribute the WiFi access on a different router. Link to comment Share on other sites More sharing options...
jernej Posted September 25, 2016 Share Posted September 25, 2016 How is it possible to add the second wireless interface bound to the same physical WiFi adapter? This was already discussed. I and Igor disabled second interface in Makefile before building it, because it is confusing for most users (at least from my point of view). Talking how to rebuild driver with this option enabled is off topic... Link to comment Share on other sites More sharing options...
Recommended Posts