autoload=no

baudrate=115200

bootcmd=mmc dev ${mmcdev}; if mmc rescan; then if run loadmmcbootscript; then run mmcbootscript; else if run mmcloadkernel; then run mmcboot; fi; fi; else if sata init; then if run loadsatabootscript; then run satabootscript; else if run sataloadkernel; then run sataboot; fi; fi; fi; fi;

bootdelay=3

bootscr=boot.scr

console=ttymxc3,115200

dtb=imx6q-utilite-pro.dtb

dtbaddr=0x15000000

eth1addr=00:01:c0:14:23:40

ethact=FEC

ethaddr=00:01:c0:14:25:df

kernel=uImage-cm-fx6

loadaddr=0x10800000

loadmmcbootscript=fatload mmc ${mmcdev} ${loadaddr} ${bootscr}

loadsatabootscript=fatload sata ${satadev} ${loadaddr} ${bootscr}

mmcargs=setenv bootargs console=${console} root=${mmcroot} ${video}

mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}

mmcbootscript=echo Running bootscript from mmc ...; source ${loadaddr}

mmcdev=2

mmcloadkernel=fatload mmc ${mmcdev} ${loadaddr} ${kernel}

mmcroot=/dev/mmcblk0p2 rw rootwait

nandargs=setenv bootargs console=${console} root=${nandroot} rootfstype=${nandrootfstype} ${video}

nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 0 400000 && bootm ${loadaddr}

nandroot=/dev/mtdblock4 rw

nandrootfstype=ubifs

root=/dev/mmcblk0p2

run_eboot=echo Starting EBOOT ...; mmc dev ${mmcdev} && mmc rescan && mmc read 10042000 a 400 && go 10042000

sataargs=setenv bootargs console=${console} root=${sataroot} ${video}

sataboot=echo Booting from sata ...; run sataargs; bootm ${loadaddr}

satabootscript=echo Running bootscript from sata ...; source ${loadaddr}

satadev=0

sataloadkernel=fatload sata ${satadev} ${loadaddr} ${kernel}

sataroot=/dev/sda2 rw rootwait

serial=CM-FX6-C1200QM-D2G-N0-ND0-U5-E-A-WB-V100-131124-0001c01425df

stderr=serial

stdin=serial

stdout=serial

video=mxcfb0:dev=hdmi,1920x1080M-24@50,if=RGB24

video_dvi=mxcfb0:dev=dvi,1280x800M-24@50,if=RGB24

video_hdmi=mxcfb0:dev=hdmi,1920x1080M-24@50,if=RGB24

zimage=zImage-cm-fx6


Environment size: 2012/8188 bytes