U-Boot SPL 2024.01_armbian-2024.01-S866c-P7738-Hadc5-Vc46c-B138f-R448a (Apr 14 2026 - 04:26:28 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2024.01_armbian-2024.01-S866c-P7738-Hadc5-Vc46c-B138f-R448a (Apr 14 2026 - 04:26:28 +0000) Allwinner Technology CPU: Allwinner R40 (SUN8I 1701) Model: Banana Pi BPI-M2-Ultra DRAM: 2 GiB Core: 66 devices, 23 uclasses, devicetree: separate WDT: Not starting watchdog@1c20c90 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: eth0: ethernet@1c50000 starting USB... Bus usb@1c19000: Port not available. Bus usb@1c19400: Port not available. Bus usb@1c1c000: Port not available. Bus usb@1c1c400: Port not available. Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 5475 bytes read in 2 ms (2.6 MiB/s) ## Executing script at 43100000 U-boot loaded from SD 203 bytes read in 2 ms (98.6 KiB/s) Load fdt: /boot/dtb/sun8i-r40-bananapi-m2-ultra.dtb 18908414 bytes read in 782 ms (23.1 MiB/s) 10542216 bytes read in 438 ms (23 MiB/s) Found mainline kernel configuration 38767 bytes read in 5 ms (7.4 MiB/s) Working FDT set to 43000000 Kernel image @ 0x42000000 [ 0x000000 - 0xa0dc88 ] ## Loading init Ramdisk from Legacy Image at 43400000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 18908350 Bytes = 18 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Working FDT set to 43000000 Loading Ramdisk to 48df7000, end 49fff4be ... OK Loading Device Tree to 48d85000, end 48df6fff ... OK Working FDT set to 48d85000 Starting kernel ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems