[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] random: get_random_bytes called from start_kernel+0x31/0x352 with crng_init=0 [ 0.000000] Linux version 4.13.14-sunxi (root@hanniubuntu) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #60 SMP Sun Nov 19 17:01:23 MSK 2017 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Sinovoip BPI-M2 [ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: dma_contiguous_reserve(limit ffffffff) [ 0.000000] cma: dma_contiguous_reserve: reserving 128 MiB for global area [ 0.000000] cma: cma_declare_contiguous(size 0x08000000, base 0x00000000, limit 0xffffffff alignment 0x00000000) [ 0.000000] cma: Reserved 128 MiB at 0x77800000 [ 0.000000] On node 0 totalpages: 260864 [ 0.000000] free_area_init_node: node 0, pgdat c0dcef00, node_mem_map ef701000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 64256 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 17 pages/cpu @ef6a1000 s39948 r8192 d21492 u69632 [ 0.000000] pcpu-alloc: s39948 r8192 d21492 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259136 [ 0.000000] Kernel command line: root=UUID=1bdd0057-9ddb-4cc3-8939-b88aaf05ea48 rootwait rootfstype=ext4 console= console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=510eaa51-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 1047552 bytes of page_ext [ 0.000000] Memory: 881872K/1043456K available (8192K kernel code, 1013K rwdata, 2416K rodata, 1024K init, 344K bss, 30512K reserved, 131072K cma-reserved, 125952K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf800000 - 0xbfe00000 ( 6 MB) .text : 0xc0008000 - 0xc0900000 (9184 kB) .init : 0xc0c00000 - 0xc0d00000 (1024 kB) .data : 0xc0d00000 - 0xc0dfd7ac (1014 kB) .bss : 0xc0e06fb0 - 0xc0e5d294 ( 345 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36629 entries in 72 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000013] Switching to timer-based delay loop, resolution 41ns [ 0.000204] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000337] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000660] Console: colour dummy device 80x30 [ 0.000688] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000697] pid_max: default: 32768 minimum: 301 [ 0.000852] Security Framework initialized [ 0.000861] AppArmor: AppArmor disabled by boot time parameter [ 0.000912] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000922] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001556] CPU: Testing write buffer coherency: ok [ 0.001853] /cpus/cpu@0 missing clock-frequency property [ 0.001862] /cpus/cpu@1 missing clock-frequency property [ 0.001870] /cpus/cpu@2 missing clock-frequency property [ 0.001880] /cpus/cpu@3 missing clock-frequency property [ 0.001888] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002177] Setting up static identity map for 0x40100000 - 0x40100054 [ 0.002269] Hierarchical SRCU implementation. [ 0.004789] smp: Bringing up secondary CPUs ... [ 0.015348] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.025944] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.036502] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.036563] smp: Brought up 1 node, 4 CPUs [ 0.036570] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.036574] CPU: All CPU(s) started in HYP mode. [ 0.036576] CPU: Virtualization extensions available. [ 0.037510] devtmpfs: initialized [ 0.046075] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3 [ 0.046353] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.046366] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.050774] xor: measuring software checksum speed [ 0.146403] arm4regs : 1255.600 MB/sec [ 0.246451] 8regs : 748.000 MB/sec [ 0.346503] 32regs : 765.600 MB/sec [ 0.446555] neon : 1271.200 MB/sec [ 0.446559] xor: using function: neon (1271.200 MB/sec) [ 0.446660] pinctrl core: initialized pinctrl subsystem [ 0.447517] NET: Registered protocol family 16 [ 0.447938] cma: cma_alloc(cma c0e39724, count 512, align 8) [ 0.448455] cma: cma_alloc(): returned efecf000 [ 0.449980] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.451442] cpuidle: using governor ladder [ 0.451550] cpuidle: using governor menu [ 0.452443] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.452447] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.637012] raid6: int32x1 gen() 189 MB/s [ 0.806902] raid6: int32x1 xor() 160 MB/s [ 0.976993] raid6: int32x2 gen() 255 MB/s [ 1.147068] raid6: int32x2 xor() 194 MB/s [ 1.317103] raid6: int32x4 gen() 258 MB/s [ 1.487192] raid6: int32x4 xor() 192 MB/s [ 1.657358] raid6: int32x8 gen() 247 MB/s [ 1.827412] raid6: int32x8 xor() 172 MB/s [ 1.997433] raid6: neonx1 gen() 494 MB/s [ 2.167583] raid6: neonx1 xor() 366 MB/s [ 2.337645] raid6: neonx2 gen() 663 MB/s [ 2.507745] raid6: neonx2 xor() 477 MB/s [ 2.677815] raid6: neonx4 gen() 795 MB/s [ 2.847930] raid6: neonx4 xor() 533 MB/s [ 3.018054] raid6: neonx8 gen() 704 MB/s [ 3.188112] raid6: neonx8 xor() 485 MB/s [ 3.188115] raid6: using algorithm neonx4 gen() 795 MB/s [ 3.188118] raid6: .... xor() 533 MB/s, rmw enabled [ 3.188121] raid6: using intx1 recovery algorithm [ 3.188346] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v0[0]' [ 3.188563] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3[0]' [ 3.188743] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0[0]' [ 3.189237] SCSI subsystem initialized [ 3.189381] libata version 3.00 loaded. [ 3.189590] usbcore: registered new interface driver usbfs [ 3.189640] usbcore: registered new interface driver hub [ 3.189702] usbcore: registered new device driver usb [ 3.189868] media: Linux media interface: v0.10 [ 3.189913] Linux video capture interface: v2.00 [ 3.189972] pps_core: LinuxPPS API ver. 1 registered [ 3.189977] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.189993] PTP clock support registered [ 3.191371] clocksource: Switched to clocksource arch_sys_counter [ 3.284892] VFS: Disk quotas dquot_6.6.0 [ 3.284964] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.285803] simple-framebuffer 7fb00000.framebuffer: framebuffer at 0x7fb00000, 0x500000 bytes, mapped to 0xf0a80000 [ 3.285812] simple-framebuffer 7fb00000.framebuffer: format=x8r8g8b8, mode=1280x1024x32, linelength=5120 [ 3.310023] Console: switching to colour frame buffer device 160x64 [ 3.311618] simple-framebuffer 7fb00000.framebuffer: fb0: simplefb registered! [ 3.319824] NET: Registered protocol family 2 [ 3.320366] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 3.320451] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 3.320562] TCP: Hash tables configured (established 8192 bind 8192) [ 3.320646] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.320692] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.320872] NET: Registered protocol family 1 [ 3.321240] RPC: Registered named UNIX socket transport module. [ 3.321244] RPC: Registered udp transport module. [ 3.321247] RPC: Registered tcp transport module. [ 3.321250] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.321496] Trying to unpack rootfs image as initramfs... [ 3.612119] Freeing initrd memory: 4924K [ 3.612748] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.613069] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 3.614278] audit: initializing netlink subsys (disabled) [ 3.614489] audit: type=2000 audit(3.603:1): state=initialized audit_enabled=0 res=1 [ 3.615011] Initialise system trusted keyrings [ 3.615140] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 3.623324] zbud: loaded [ 3.626296] NFS: Registering the id_resolver key type [ 3.626313] Key type id_resolver registered [ 3.626316] Key type id_legacy registered [ 3.626327] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.626331] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.627308] JFS: nTxBlock = 7952, nTxLock = 63616 [ 3.636633] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 3.639505] random: fast init done [ 3.643662] Key type asymmetric registered [ 3.643712] bounce: pool size: 64 pages [ 3.643771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.643862] io scheduler noop registered [ 3.643866] io scheduler deadline registered [ 3.644233] io scheduler cfq registered (default) [ 3.644237] io scheduler mq-deadline registered [ 3.644241] io scheduler kyber registered [ 3.644434] io scheduler bfq registered [ 3.645543] sun4i-usb-phy 1c19400.phy: GPIO lookup for consumer usb0_id_det [ 3.645549] sun4i-usb-phy 1c19400.phy: using device tree for GPIO lookup [ 3.645558] of_get_named_gpiod_flags: can't parse 'usb0_id_det-gpios' property of node '/soc@01c00000/phy@01c19400[0]' [ 3.645565] of_get_named_gpiod_flags: can't parse 'usb0_id_det-gpio' property of node '/soc@01c00000/phy@01c19400[0]' [ 3.645571] sun4i-usb-phy 1c19400.phy: using lookup tables for GPIO lookup [ 3.645578] sun4i-usb-phy 1c19400.phy: lookup for GPIO usb0_id_det failed [ 3.645584] sun4i-usb-phy 1c19400.phy: GPIO lookup for consumer usb0_vbus_det [ 3.645589] sun4i-usb-phy 1c19400.phy: using device tree for GPIO lookup [ 3.645595] of_get_named_gpiod_flags: can't parse 'usb0_vbus_det-gpios' property of node '/soc@01c00000/phy@01c19400[0]' [ 3.645602] of_get_named_gpiod_flags: can't parse 'usb0_vbus_det-gpio' property of node '/soc@01c00000/phy@01c19400[0]' [ 3.645607] sun4i-usb-phy 1c19400.phy: using lookup tables for GPIO lookup [ 3.645612] sun4i-usb-phy 1c19400.phy: lookup for GPIO usb0_vbus_det failed [ 3.647617] gpio gpiochip0: (1c20800.pinctrl): added GPIO chardev (254:0) [ 3.647721] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (1c20800.pinctrl) [ 3.647732] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 0->0 ==> 1c20800.pinctrl PIN 0->0 [ 3.647740] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 1->1 ==> 1c20800.pinctrl PIN 1->1 [ 3.647748] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 2->2 ==> 1c20800.pinctrl PIN 2->2 [ 3.647756] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 3->3 ==> 1c20800.pinctrl PIN 3->3 [ 3.647764] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 4->4 ==> 1c20800.pinctrl PIN 4->4 [ 3.647772] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 5->5 ==> 1c20800.pinctrl PIN 5->5 [ 3.647780] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 6->6 ==> 1c20800.pinctrl PIN 6->6 [ 3.647788] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 7->7 ==> 1c20800.pinctrl PIN 7->7 [ 3.647796] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 8->8 ==> 1c20800.pinctrl PIN 8->8 [ 3.647805] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 9->9 ==> 1c20800.pinctrl PIN 9->9 [ 3.647813] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 10->10 ==> 1c20800.pinctrl PIN 10->10 [ 3.647822] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 11->11 ==> 1c20800.pinctrl PIN 11->11 [ 3.647830] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 12->12 ==> 1c20800.pinctrl PIN 12->12 [ 3.647838] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 13->13 ==> 1c20800.pinctrl PIN 13->13 [ 3.647846] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 14->14 ==> 1c20800.pinctrl PIN 14->14 [ 3.647855] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 15->15 ==> 1c20800.pinctrl PIN 15->15 [ 3.647863] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 16->16 ==> 1c20800.pinctrl PIN 16->16 [ 3.647871] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 17->17 ==> 1c20800.pinctrl PIN 17->17 [ 3.647879] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 18->18 ==> 1c20800.pinctrl PIN 18->18 [ 3.647888] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 19->19 ==> 1c20800.pinctrl PIN 19->19 [ 3.647896] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 20->20 ==> 1c20800.pinctrl PIN 20->20 [ 3.647912] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 21->21 ==> 1c20800.pinctrl PIN 21->21 [ 3.647921] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 22->22 ==> 1c20800.pinctrl PIN 22->22 [ 3.647929] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 23->23 ==> 1c20800.pinctrl PIN 23->23 [ 3.647937] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 24->24 ==> 1c20800.pinctrl PIN 24->24 [ 3.647945] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 25->25 ==> 1c20800.pinctrl PIN 25->25 [ 3.647954] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 26->26 ==> 1c20800.pinctrl PIN 26->26 [ 3.647962] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 27->27 ==> 1c20800.pinctrl PIN 27->27 [ 3.647970] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 32->32 ==> 1c20800.pinctrl PIN 32->32 [ 3.647978] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 33->33 ==> 1c20800.pinctrl PIN 33->33 [ 3.647987] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 34->34 ==> 1c20800.pinctrl PIN 34->34 [ 3.647995] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 35->35 ==> 1c20800.pinctrl PIN 35->35 [ 3.648003] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 36->36 ==> 1c20800.pinctrl PIN 36->36 [ 3.648012] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 37->37 ==> 1c20800.pinctrl PIN 37->37 [ 3.648020] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 38->38 ==> 1c20800.pinctrl PIN 38->38 [ 3.648028] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 39->39 ==> 1c20800.pinctrl PIN 39->39 [ 3.648036] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 64->64 ==> 1c20800.pinctrl PIN 64->64 [ 3.648045] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 65->65 ==> 1c20800.pinctrl PIN 65->65 [ 3.648053] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 66->66 ==> 1c20800.pinctrl PIN 66->66 [ 3.648061] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 67->67 ==> 1c20800.pinctrl PIN 67->67 [ 3.648070] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 68->68 ==> 1c20800.pinctrl PIN 68->68 [ 3.648078] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 69->69 ==> 1c20800.pinctrl PIN 69->69 [ 3.648086] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 70->70 ==> 1c20800.pinctrl PIN 70->70 [ 3.648095] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 71->71 ==> 1c20800.pinctrl PIN 71->71 [ 3.648103] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 72->72 ==> 1c20800.pinctrl PIN 72->72 [ 3.648111] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 73->73 ==> 1c20800.pinctrl PIN 73->73 [ 3.648119] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 74->74 ==> 1c20800.pinctrl PIN 74->74 [ 3.648128] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 75->75 ==> 1c20800.pinctrl PIN 75->75 [ 3.648136] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 76->76 ==> 1c20800.pinctrl PIN 76->76 [ 3.648144] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 77->77 ==> 1c20800.pinctrl PIN 77->77 [ 3.648153] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 78->78 ==> 1c20800.pinctrl PIN 78->78 [ 3.648161] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 79->79 ==> 1c20800.pinctrl PIN 79->79 [ 3.648169] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 80->80 ==> 1c20800.pinctrl PIN 80->80 [ 3.648177] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 81->81 ==> 1c20800.pinctrl PIN 81->81 [ 3.648186] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 82->82 ==> 1c20800.pinctrl PIN 82->82 [ 3.648194] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 83->83 ==> 1c20800.pinctrl PIN 83->83 [ 3.648202] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 84->84 ==> 1c20800.pinctrl PIN 84->84 [ 3.648210] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 85->85 ==> 1c20800.pinctrl PIN 85->85 [ 3.648219] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 86->86 ==> 1c20800.pinctrl PIN 86->86 [ 3.648227] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 87->87 ==> 1c20800.pinctrl PIN 87->87 [ 3.648235] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 88->88 ==> 1c20800.pinctrl PIN 88->88 [ 3.648243] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 89->89 ==> 1c20800.pinctrl PIN 89->89 [ 3.648252] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 90->90 ==> 1c20800.pinctrl PIN 90->90 [ 3.648260] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 91->91 ==> 1c20800.pinctrl PIN 91->91 [ 3.648268] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 96->96 ==> 1c20800.pinctrl PIN 96->96 [ 3.648276] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 97->97 ==> 1c20800.pinctrl PIN 97->97 [ 3.648285] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 98->98 ==> 1c20800.pinctrl PIN 98->98 [ 3.648293] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 99->99 ==> 1c20800.pinctrl PIN 99->99 [ 3.648302] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 100->100 ==> 1c20800.pinctrl PIN 100->100 [ 3.648310] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 101->101 ==> 1c20800.pinctrl PIN 101->101 [ 3.648318] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 102->102 ==> 1c20800.pinctrl PIN 102->102 [ 3.648326] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 103->103 ==> 1c20800.pinctrl PIN 103->103 [ 3.648335] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 104->104 ==> 1c20800.pinctrl PIN 104->104 [ 3.648343] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 105->105 ==> 1c20800.pinctrl PIN 105->105 [ 3.648351] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 106->106 ==> 1c20800.pinctrl PIN 106->106 [ 3.648359] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 107->107 ==> 1c20800.pinctrl PIN 107->107 [ 3.648368] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 108->108 ==> 1c20800.pinctrl PIN 108->108 [ 3.648376] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 109->109 ==> 1c20800.pinctrl PIN 109->109 [ 3.648384] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 110->110 ==> 1c20800.pinctrl PIN 110->110 [ 3.648393] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 111->111 ==> 1c20800.pinctrl PIN 111->111 [ 3.648401] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 112->112 ==> 1c20800.pinctrl PIN 112->112 [ 3.648409] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 113->113 ==> 1c20800.pinctrl PIN 113->113 [ 3.648417] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 114->114 ==> 1c20800.pinctrl PIN 114->114 [ 3.648426] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 115->115 ==> 1c20800.pinctrl PIN 115->115 [ 3.648434] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 116->116 ==> 1c20800.pinctrl PIN 116->116 [ 3.648450] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 117->117 ==> 1c20800.pinctrl PIN 117->117 [ 3.648458] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 118->118 ==> 1c20800.pinctrl PIN 118->118 [ 3.648467] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 119->119 ==> 1c20800.pinctrl PIN 119->119 [ 3.648475] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 120->120 ==> 1c20800.pinctrl PIN 120->120 [ 3.648483] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 121->121 ==> 1c20800.pinctrl PIN 121->121 [ 3.648491] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 122->122 ==> 1c20800.pinctrl PIN 122->122 [ 3.648500] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 123->123 ==> 1c20800.pinctrl PIN 123->123 [ 3.648508] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 128->128 ==> 1c20800.pinctrl PIN 128->128 [ 3.648516] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 129->129 ==> 1c20800.pinctrl PIN 129->129 [ 3.648525] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 130->130 ==> 1c20800.pinctrl PIN 130->130 [ 3.648533] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 131->131 ==> 1c20800.pinctrl PIN 131->131 [ 3.648541] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 132->132 ==> 1c20800.pinctrl PIN 132->132 [ 3.648549] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 133->133 ==> 1c20800.pinctrl PIN 133->133 [ 3.648558] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 134->134 ==> 1c20800.pinctrl PIN 134->134 [ 3.648566] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 135->135 ==> 1c20800.pinctrl PIN 135->135 [ 3.648574] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 136->136 ==> 1c20800.pinctrl PIN 136->136 [ 3.648583] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 137->137 ==> 1c20800.pinctrl PIN 137->137 [ 3.648591] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 138->138 ==> 1c20800.pinctrl PIN 138->138 [ 3.648599] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 139->139 ==> 1c20800.pinctrl PIN 139->139 [ 3.648607] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 140->140 ==> 1c20800.pinctrl PIN 140->140 [ 3.648616] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 141->141 ==> 1c20800.pinctrl PIN 141->141 [ 3.648624] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 142->142 ==> 1c20800.pinctrl PIN 142->142 [ 3.648632] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 143->143 ==> 1c20800.pinctrl PIN 143->143 [ 3.648640] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 144->144 ==> 1c20800.pinctrl PIN 144->144 [ 3.648649] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 160->160 ==> 1c20800.pinctrl PIN 160->160 [ 3.648657] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 161->161 ==> 1c20800.pinctrl PIN 161->161 [ 3.648665] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 162->162 ==> 1c20800.pinctrl PIN 162->162 [ 3.648674] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 163->163 ==> 1c20800.pinctrl PIN 163->163 [ 3.648682] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 164->164 ==> 1c20800.pinctrl PIN 164->164 [ 3.648691] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 165->165 ==> 1c20800.pinctrl PIN 165->165 [ 3.648699] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 192->192 ==> 1c20800.pinctrl PIN 192->192 [ 3.648707] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 193->193 ==> 1c20800.pinctrl PIN 193->193 [ 3.648715] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 194->194 ==> 1c20800.pinctrl PIN 194->194 [ 3.648723] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 195->195 ==> 1c20800.pinctrl PIN 195->195 [ 3.648732] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 196->196 ==> 1c20800.pinctrl PIN 196->196 [ 3.648740] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 197->197 ==> 1c20800.pinctrl PIN 197->197 [ 3.648748] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 198->198 ==> 1c20800.pinctrl PIN 198->198 [ 3.648757] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 199->199 ==> 1c20800.pinctrl PIN 199->199 [ 3.648765] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 200->200 ==> 1c20800.pinctrl PIN 200->200 [ 3.648773] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 201->201 ==> 1c20800.pinctrl PIN 201->201 [ 3.648782] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 202->202 ==> 1c20800.pinctrl PIN 202->202 [ 3.648790] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 203->203 ==> 1c20800.pinctrl PIN 203->203 [ 3.648798] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 204->204 ==> 1c20800.pinctrl PIN 204->204 [ 3.648806] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 205->205 ==> 1c20800.pinctrl PIN 205->205 [ 3.648814] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 206->206 ==> 1c20800.pinctrl PIN 206->206 [ 3.648823] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 207->207 ==> 1c20800.pinctrl PIN 207->207 [ 3.648831] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 208->208 ==> 1c20800.pinctrl PIN 208->208 [ 3.648839] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 209->209 ==> 1c20800.pinctrl PIN 209->209 [ 3.648848] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 210->210 ==> 1c20800.pinctrl PIN 210->210 [ 3.648856] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 224->224 ==> 1c20800.pinctrl PIN 224->224 [ 3.648864] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 225->225 ==> 1c20800.pinctrl PIN 225->225 [ 3.648873] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 226->226 ==> 1c20800.pinctrl PIN 226->226 [ 3.648881] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 227->227 ==> 1c20800.pinctrl PIN 227->227 [ 3.648889] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 228->228 ==> 1c20800.pinctrl PIN 228->228 [ 3.648897] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 229->229 ==> 1c20800.pinctrl PIN 229->229 [ 3.648905] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 230->230 ==> 1c20800.pinctrl PIN 230->230 [ 3.648914] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 231->231 ==> 1c20800.pinctrl PIN 231->231 [ 3.648922] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 232->232 ==> 1c20800.pinctrl PIN 232->232 [ 3.648931] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 233->233 ==> 1c20800.pinctrl PIN 233->233 [ 3.648939] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 234->234 ==> 1c20800.pinctrl PIN 234->234 [ 3.648947] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 235->235 ==> 1c20800.pinctrl PIN 235->235 [ 3.648955] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 236->236 ==> 1c20800.pinctrl PIN 236->236 [ 3.648964] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 237->237 ==> 1c20800.pinctrl PIN 237->237 [ 3.648972] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 238->238 ==> 1c20800.pinctrl PIN 238->238 [ 3.648988] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 239->239 ==> 1c20800.pinctrl PIN 239->239 [ 3.648996] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 240->240 ==> 1c20800.pinctrl PIN 240->240 [ 3.649004] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 241->241 ==> 1c20800.pinctrl PIN 241->241 [ 3.649012] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 242->242 ==> 1c20800.pinctrl PIN 242->242 [ 3.649021] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 243->243 ==> 1c20800.pinctrl PIN 243->243 [ 3.649029] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 244->244 ==> 1c20800.pinctrl PIN 244->244 [ 3.649037] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 245->245 ==> 1c20800.pinctrl PIN 245->245 [ 3.649045] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 246->246 ==> 1c20800.pinctrl PIN 246->246 [ 3.649054] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 247->247 ==> 1c20800.pinctrl PIN 247->247 [ 3.649062] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 248->248 ==> 1c20800.pinctrl PIN 248->248 [ 3.649070] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 249->249 ==> 1c20800.pinctrl PIN 249->249 [ 3.649079] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 250->250 ==> 1c20800.pinctrl PIN 250->250 [ 3.649087] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 251->251 ==> 1c20800.pinctrl PIN 251->251 [ 3.649095] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 252->252 ==> 1c20800.pinctrl PIN 252->252 [ 3.649104] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 253->253 ==> 1c20800.pinctrl PIN 253->253 [ 3.649112] gpio gpiochip0: (1c20800.pinctrl): created GPIO range 254->254 ==> 1c20800.pinctrl PIN 254->254 [ 3.653731] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 3.653968] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing [ 3.709015] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 3.712615] console [ttyS0] disabled [ 3.732754] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A [ 3.732793] console [ttyS0] enabled [ 3.732797] bootconsole [uart0] disabled [ 3.736316] brd: module loaded [ 3.742426] loop: module loaded [ 3.745165] mdio_bus fixed-0: GPIO lookup for consumer reset [ 3.745172] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 3.745179] mdio_bus fixed-0: lookup for GPIO reset failed [ 3.745202] libphy: Fixed MDIO Bus: probed [ 3.745680] sun7i-dwmac 1c30000.ethernet: PTP uses main clock [ 3.745715] sun7i-dwmac 1c30000.ethernet: no regulator found [ 3.745756] sun7i-dwmac 1c30000.ethernet: Ring mode enabled [ 3.745762] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported [ 3.745768] sun7i-dwmac 1c30000.ethernet: Normal descriptors [ 3.745847] mdio_bus stmmac-0: GPIO lookup for consumer reset [ 3.745853] mdio_bus stmmac-0: using lookup tables for GPIO lookup [ 3.745858] mdio_bus stmmac-0: lookup for GPIO reset failed [ 3.745876] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/soc@01c00000/ethernet@01c30000[0]' - status (0) [ 3.836634] libphy: stmmac: probed [ 3.836650] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=-1) [ 3.836657] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=-1) [ 3.837795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.837816] ehci-platform: EHCI generic platform driver [ 3.838017] ehci-platform 1c1a000.usb: EHCI Host Controller [ 3.838045] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 3.838073] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 3.838547] cma: cma_alloc(): returned efed3800 [ 3.838573] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 3.838599] cma: cma_alloc(): returned efed3824 [ 3.838619] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 3.838642] cma: cma_alloc(): returned efed3848 [ 3.838720] ehci-platform 1c1a000.usb: irq 33, io mem 0x01c1a000 [ 3.871418] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 3.871736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.871743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.871749] usb usb1: Product: EHCI Host Controller [ 3.871754] usb usb1: Manufacturer: Linux 4.13.14-sunxi ehci_hcd [ 3.871759] usb usb1: SerialNumber: 1c1a000.usb [ 3.872350] hub 1-0:1.0: USB hub found [ 3.872390] hub 1-0:1.0: 1 port detected [ 3.872848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.872861] ohci-platform: OHCI generic platform driver [ 3.873034] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 3.873056] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 [ 3.873074] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 3.873142] cma: cma_alloc(): returned efed386c [ 3.873221] ohci-platform 1c1a400.usb: irq 34, io mem 0x01c1a400 [ 3.955578] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.955585] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.955591] usb usb2: Product: Generic Platform OHCI controller [ 3.955596] usb usb2: Manufacturer: Linux 4.13.14-sunxi ohci_hcd [ 3.955601] usb usb2: SerialNumber: 1c1a400.usb [ 3.956140] hub 2-0:1.0: USB hub found [ 3.956178] hub 2-0:1.0: 1 port detected [ 3.956703] usbcore: registered new interface driver usb-storage [ 3.957222] mousedev: PS/2 mouse device common for all mice [ 3.957726] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 3.957732] sun6i-rtc 1f00000.rtc: RTC enabled [ 3.957906] i2c /dev entries driver [ 3.960805] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 3.961844] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 3.961897] cma: cma_alloc(): returned efed3890 [ 3.961932] sunxi-mmc 1c0f000.mmc: GPIO lookup for consumer cd [ 3.961938] sunxi-mmc 1c0f000.mmc: using device tree for GPIO lookup [ 3.961955] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc@01c00000/mmc@01c0f000[0]' - status (0) [ 3.961973] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.961980] sunxi-mmc 1c0f000.mmc: GPIO lookup for consumer wp [ 3.961985] sunxi-mmc 1c0f000.mmc: using device tree for GPIO lookup [ 3.961992] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@01c00000/mmc@01c0f000[0]' [ 3.961998] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@01c00000/mmc@01c0f000[0]' [ 3.962003] sunxi-mmc 1c0f000.mmc: using lookup tables for GPIO lookup [ 3.962009] sunxi-mmc 1c0f000.mmc: lookup for GPIO wp failed [ 4.021504] sunxi-mmc 1c0f000.mmc: base:0xf150f000 irq:31 [ 4.021879] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 4.021912] cma: cma_alloc(): returned efed38b4 [ 4.021936] sunxi-mmc 1c11000.mmc: GPIO lookup for consumer wp [ 4.021941] sunxi-mmc 1c11000.mmc: using device tree for GPIO lookup [ 4.021949] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.021955] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.021960] sunxi-mmc 1c11000.mmc: using lookup tables for GPIO lookup [ 4.021965] sunxi-mmc 1c11000.mmc: lookup for GPIO wp failed [ 4.022005] cma: cma_release(page efed38b4) [ 4.022638] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/blue[0]' - status (0) [ 4.022667] no flags found for gpios [ 4.022802] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green[0]' - status (0) [ 4.022811] no flags found for gpios [ 4.022920] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red[0]' - status (0) [ 4.022929] no flags found for gpios [ 4.023340] ledtrig-cpu: registered to indicate activity on CPUs [ 4.023409] hidraw: raw HID events driver (C) Jiri Kosina [ 4.023525] usbcore: registered new interface driver usbhid [ 4.023528] usbhid: USB HID core driver [ 4.024656] NET: Registered protocol family 10 [ 4.036423] Segment Routing with IPv6 [ 4.036498] NET: Registered protocol family 17 [ 4.036577] Key type dns_resolver registered [ 4.036959] Registering SWP/SWPB emulation handler [ 4.037481] registered taskstats version 1 [ 4.037484] Loading compiled-in X.509 certificates [ 4.037556] zswap: loaded using pool lzo/zbud [ 4.039362] Btrfs loaded, crc32c=crc32c-generic [ 4.044747] Key type encrypted registered [ 4.051930] gpio gpiochip1: (1f02c00.pinctrl): added GPIO chardev (254:1) [ 4.052028] gpiochip_setup_dev: registered GPIOs 352 to 415 on device: gpiochip1 (1f02c00.pinctrl) [ 4.052039] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 0->0 ==> 1f02c00.pinctrl PIN 352->352 [ 4.052048] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 1->1 ==> 1f02c00.pinctrl PIN 353->353 [ 4.052057] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 2->2 ==> 1f02c00.pinctrl PIN 354->354 [ 4.052065] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 3->3 ==> 1f02c00.pinctrl PIN 355->355 [ 4.052074] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 4->4 ==> 1f02c00.pinctrl PIN 356->356 [ 4.052082] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 5->5 ==> 1f02c00.pinctrl PIN 357->357 [ 4.052090] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 6->6 ==> 1f02c00.pinctrl PIN 358->358 [ 4.052099] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 7->7 ==> 1f02c00.pinctrl PIN 359->359 [ 4.052107] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 8->8 ==> 1f02c00.pinctrl PIN 360->360 [ 4.052116] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 32->32 ==> 1f02c00.pinctrl PIN 384->384 [ 4.052125] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 33->33 ==> 1f02c00.pinctrl PIN 385->385 [ 4.052133] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 34->34 ==> 1f02c00.pinctrl PIN 386->386 [ 4.052142] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 35->35 ==> 1f02c00.pinctrl PIN 387->387 [ 4.052150] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 36->36 ==> 1f02c00.pinctrl PIN 388->388 [ 4.052159] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 37->37 ==> 1f02c00.pinctrl PIN 389->389 [ 4.052167] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 38->38 ==> 1f02c00.pinctrl PIN 390->390 [ 4.052176] gpio gpiochip1: (1f02c00.pinctrl): created GPIO range 39->39 ==> 1f02c00.pinctrl PIN 391->391 [ 4.054801] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 4.055702] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 4.055761] alloc_contig_range: [77a05, 77a06) PFNs busy [ 4.055775] cma: cma_alloc(): memory range at efed38b4 is busy, retrying [ 4.055805] cma: cma_alloc(): returned efed38d8 [ 4.055849] sunxi-mmc 1c11000.mmc: GPIO lookup for consumer wp [ 4.055854] sunxi-mmc 1c11000.mmc: using device tree for GPIO lookup [ 4.055863] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.055870] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.055875] sunxi-mmc 1c11000.mmc: using lookup tables for GPIO lookup [ 4.055882] sunxi-mmc 1c11000.mmc: lookup for GPIO wp failed [ 4.055931] cma: cma_release(page efed38d8) [ 4.056569] of_cfs_init [ 4.056638] of_cfs_init: OK [ 4.056781] vcc3v3: disabling [ 4.056787] vcc5v0: disabling [ 4.060262] Freeing unused kernel memory: 1024K [ 4.068678] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.070633] mmc0: new high speed SDHC card at address 59b4 [ 4.071258] mmcblk0: mmc0:59b4 00000 14.9 GiB [ 4.072619] mmcblk0: p1 [ 4.074154] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 4.074422] alloc_contig_range: [77a05, 77a06) PFNs busy [ 4.074438] cma: cma_alloc(): memory range at efed38b4 is busy, retrying [ 4.074454] alloc_contig_range: [77a06, 77a07) PFNs busy [ 4.074465] cma: cma_alloc(): memory range at efed38d8 is busy, retrying [ 4.074489] cma: cma_alloc(): returned efed38fc [ 4.074533] sunxi-mmc 1c11000.mmc: GPIO lookup for consumer wp [ 4.074540] sunxi-mmc 1c11000.mmc: using device tree for GPIO lookup [ 4.074552] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.074559] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.074565] sunxi-mmc 1c11000.mmc: using lookup tables for GPIO lookup [ 4.074572] sunxi-mmc 1c11000.mmc: lookup for GPIO wp failed [ 4.074623] cma: cma_release(page efed38fc) [ 4.241408] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 4.418841] pwrseq_simple mmc2_pwrseq: GPIO lookup for consumer reset [ 4.418851] pwrseq_simple mmc2_pwrseq: using device tree for GPIO lookup [ 4.418872] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/mmc2_pwrseq[0]' - status (0) [ 4.420194] cma: cma_alloc(cma c0e39724, count 1, align 0) [ 4.422250] cma: cma_alloc(): returned efed38b4 [ 4.422301] sunxi-mmc 1c11000.mmc: GPIO lookup for consumer wp [ 4.422306] sunxi-mmc 1c11000.mmc: using device tree for GPIO lookup [ 4.422315] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.422322] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc@01c00000/mmc@01c11000[0]' [ 4.422327] sunxi-mmc 1c11000.mmc: using lookup tables for GPIO lookup [ 4.422334] sunxi-mmc 1c11000.mmc: lookup for GPIO wp failed [ 4.422397] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq [ 4.432141] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 4.432152] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.432157] usb 1-1: Product: USB 2.0 Hub [ 4.432822] hub 1-1:1.0: USB hub found [ 4.433004] hub 1-1:1.0: 4 ports detected [ 4.481436] sunxi-mmc 1c11000.mmc: base:0xf1580000 irq:32 [ 4.487555] axp20x-i2c 3-0068: AXP20x variant AXP221 found [ 4.497516] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.499412] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.500940] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.503743] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.513294] input: axp20x-pek as /devices/platform/soc@01c00000/1f03400.i2c/i2c-3/3-0068/axp20x-pek/input/input0 [ 4.514165] dcdc1: supplied by regulator-dummy [ 4.515564] dcdc2: supplied by regulator-dummy [ 4.516382] dcdc3: supplied by regulator-dummy [ 4.518320] dcdc4: supplied by regulator-dummy [ 4.518928] mmc1: new high speed SDIO card at address 0001 [ 4.519162] dcdc5: supplied by regulator-dummy [ 4.519976] dc1sw: supplied by vdd-3v0 [ 4.520798] dc5ldo: supplied by vcc-dram [ 4.521626] aldo1: supplied by regulator-dummy [ 4.522442] aldo2: supplied by regulator-dummy [ 4.523301] aldo3: supplied by regulator-dummy [ 4.524937] eldo1: supplied by regulator-dummy [ 4.525742] eldo2: supplied by regulator-dummy [ 4.526730] eldo3: supplied by regulator-dummy [ 4.527533] dldo1: supplied by regulator-dummy [ 4.528359] dldo2: supplied by regulator-dummy [ 4.529193] dldo3: supplied by regulator-dummy [ 4.530008] dldo4: supplied by regulator-dummy [ 4.530849] rtc_ldo: supplied by regulator-dummy [ 4.531066] ldo_io0: supplied by regulator-dummy [ 4.535647] ldo_io1: supplied by regulator-dummy [ 4.540400] axp20x-i2c 3-0068: AXP20X driver loaded [ 5.155609] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 5.698357] systemd[1]: System time before build time, advancing clock. [ 5.729817] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.755473] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.756029] systemd[1]: Detected architecture arm. [ 5.792469] systemd[1]: Set hostname to . [ 6.262158] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.291749] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.321872] systemd[1]: Listening on Journal Audit Socket. [ 6.351693] systemd[1]: Listening on udev Control Socket. [ 6.381619] systemd[1]: Listening on udev Kernel Socket. [ 6.412397] systemd[1]: Created slice User and Session Slice. [ 6.442111] systemd[1]: Created slice System Slice. [ 6.947743] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 7.107607] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 7.212982] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 7.640659] Adding 131068k swap on /var/swap. Priority:-1 extents:3 across:163840k SSFS [ 8.300170] sun4i-ss 1c15000.crypto-engine: Die ID 5 [ 8.357671] sun6i-spi 1c69000.spi: registered master spi32766 (dynamic) [ 8.357919] spi spi32766.0: setup mode 0, 8 bits/w, 2000000 Hz max --> 0 [ 8.358236] sun6i-spi 1c69000.spi: registered child spi32766.0 [ 8.460569] sun4i-codec 1c22c00.codec: GPIO lookup for consumer allwinner,pa [ 8.460579] sun4i-codec 1c22c00.codec: using device tree for GPIO lookup [ 8.460591] of_get_named_gpiod_flags: can't parse 'allwinner,pa-gpios' property of node '/soc@01c00000/codec@01c22c00[0]' [ 8.460598] of_get_named_gpiod_flags: can't parse 'allwinner,pa-gpio' property of node '/soc@01c00000/codec@01c22c00[0]' [ 8.460603] sun4i-codec 1c22c00.codec: using lookup tables for GPIO lookup [ 8.460610] sun4i-codec 1c22c00.codec: lookup for GPIO allwinner,pa failed [ 8.461218] cma: cma_alloc(cma c0e39724, count 128, align 7) [ 8.462396] cma: cma_alloc(): returned efed4a00 [ 8.462888] cma: cma_alloc(cma c0e39724, count 128, align 7) [ 8.463045] cma: cma_alloc(): returned efed5c00 [ 8.463471] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 8.944938] systemd-journald[353]: Received request to flush runtime journal from PID 1 [ 8.984830] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.061110] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=-1) [ 9.061135] cma: cma_alloc(cma c0e39724, count 2, align 1) [ 9.063103] cma: cma_alloc(): returned efed38d8 [ 9.063151] cma: cma_alloc(cma c0e39724, count 2, align 1) [ 9.063190] cma: cma_alloc(): returned efed3920 [ 9.166014] sun7i-dwmac 1c30000.ethernet eth0: RX IPC Checksum Offload disabled [ 9.166026] sun7i-dwmac 1c30000.ethernet eth0: No MAC Management Counters available [ 9.166033] sun7i-dwmac 1c30000.ethernet eth0: PTP not supported by HW [ 9.166288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.241434] thermal thermal_zone0: failed to read out thermal zone (-110) [ 10.801417] brcmfmac: brcmf_p2p_create_p2pdev: timeout occurred [ 10.801434] brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5 [ 12.487220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.833958] random: crng init done [ 26.108251] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 26.108260] brcmfmac: brcmf_fweh_event_worker: event handler failed (72) [ 66.864654] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 66.864668] brcmfmac: brcmf_fweh_event_worker: event handler failed (72) [ 86.867673] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 86.867687] brcmfmac: brcmf_fweh_event_worker: event handler failed (72) [ 109.861745] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 109.861753] brcmfmac: brcmf_fweh_event_worker: event handler failed (72) [ 118.603898] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 118.603904] brcmfmac: brcmf_fweh_event_worker: event handler failed (72) [ 118.605878] brcmfmac: brcmf_fweh_call_event_handler: no interface object [ 118.605884] brcmfmac: brcmf_fweh_event_worker: event handler failed (72)