U-Boot 2018.05-armbian (Sep 12 2018 - 10:40:28 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Failed (-5) In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 230454 bytes read in 35 ms (6.3 MiB/s) Unknown command 'bmp' - try 'help' starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3708 bytes read in 18 ms (201.2 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 228 bytes read in 14 ms (15.6 KiB/s) 5076299 bytes read in 411 ms (11.8 MiB/s) 6979752 bytes read in 558 ms (11.9 MiB/s) Found mainline kernel configuration 31460 bytes read in 60 ms (511.7 KiB/s) 504 bytes read in 72 ms (6.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost1.dtbo 504 bytes read in 74 ms (5.9 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo 4179 bytes read in 62 ms (65.4 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5076235 Bytes = 4.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 49b28000, end 49fff50b ... OK reserving fdt memory region: addr=43000000 size=6e000 Loading Device Tree to 49ab7000, end 49b27fff ... OK Starting kernel ... Loading, please wait... starting version 232 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: recovering journal /dev/sda1: clean, 37593/3670016 files, 536485/14653665 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to ?[1mDebian GNU/Linux 9 (stretch)?[0m! [?[0;32m OK ?[0m] Set up automount Arbitrary Executab…rmats File System Automount Point. [?[0;32m OK ?[0m] Created slice User and Session Slice. [?[0;32m OK ?[0m] Reached target Swap. [?[0;32m OK ?[0m] Created slice System Slice. [?[0;32m OK ?[0m] Created slice system-getty.slice. [?[0;32m OK ?[0m] Reached target Slices. [?[0;32m OK ?[0m] Listening on /dev/initctl Compatibility Named Pipe. Mounting Debug File System... [?[0;32m OK ?[0m] Listening on Journal Socket. Starting Load Kernel Modules... Starting Restore / save the current clock... Starting Nameserver information manager... Mounting POSIX Message Queue File System... [?[0;32m OK ?[0m] Listening on udev Control Socket. Starting Create list of required st…ce nodes for the current kernel... [?[0;32m OK ?[0m] Created slice system-systemd\x2dfsck.slice. [?[0;32m OK ?[0m] Started Forward Password Requests to Wall Directory Watch. Starting Set the console keyboard layout... [?[0;32m OK ?[0m] Reached target Remote File Systems. [?[0;32m OK ?[0m] Started Dispatch Password Requests to Console Directory Watch. [?[0;32m OK ?[0m] Reached target Encrypted Volumes. [?[0;32m OK ?[0m] Reached target Paths. [?[0;32m OK ?[0m] Listening on Journal Socket (/dev/log). [?[0;32m OK ?[0m] Listening on udev Kernel Socket. [?[0;32m OK ?[0m] Listening on Journal Audit Socket. [?[0;32m OK ?[0m] Created slice system-serial\x2dgetty.slice. [?[0;32m OK ?[0m] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... [?[0;32m OK ?[0m] Listening on Syslog Socket. Starting Journal Service... [?[0;32m OK ?[0m] Mounted Debug File System. [?[0;32m OK ?[0m] Mounted POSIX Message Queue File System. [?[0;32m OK ?[0m] Started Load Kernel Modules. [?[0;32m OK ?[0m] Started Restore / save the current clock. [?[0;32m OK ?[0m] Started Create list of required sta…vice nodes for the current kernel. [?[0;32m OK ?[0m] Started Remount Root and Kernel File Systems. [?[0;32m OK ?[0m] Started Nameserver information manager. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Mounting Configuration File System... Starting Apply Kernel Variables... [?[0;32m OK ?[0m] Mounted Configuration File System. [?[0;32m OK ?[0m] Started Load/Save Random Seed. [?[0;32m OK ?[0m] Started Apply Kernel Variables. [?[0;32m OK ?[0m] Started Journal Service. Starting Flush Journal to Persistent Storage... [?[0;32m OK ?[0m] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [?[0;32m OK ?[0m] Started Set the console keyboard layout. [?[0;32m OK ?[0m] Reached target Local File Systems (Pre). Mounting /tmp... [?[0;32m OK ?[0m] Started Flush Journal to Persistent Storage. [?[0;32m OK ?[0m] Mounted /tmp. [?[0;32m OK ?[0m] Started udev Kernel Device Manager. [?[0;32m OK ?[0m] Started udev Coldplug all Devices. [?[0;32m OK ?[0m] Found device /dev/ttyS0. [?[0;32m OK ?[0m] Found device /dev/disk/by-uuid/2979-8F05. Starting File System Check on /dev/disk/by-uuid/2979-8F05... [?[0;32m OK ?[0m] Started File System Check Daemon to report status. [?[0;32m OK ?[0m] Started File System Check on /dev/disk/by-uuid/2979-8F05. Mounting /media/mmcboot... [?[0;1;31mFAILED?[0m] Failed to mount /media/mmcboot. See 'systemctl status media-mmcboot.mount' for details. [?[0;1;33mDEPEND?[0m] Dependency failed for /boot. [?[0;1;33mDEPEND?[0m] Dependency failed for Unattended Upgrades Shutdown. [?[0;1;33mDEPEND?[0m] Dependency failed for Local File Systems. Starting Set console font and keymap... Starting Raise network interfaces... Starting Armbian ZRAM config... [?[0;32m OK ?[0m] Reached target Timers. [?[0;32m OK ?[0m] Closed Syslog Socket. [?[0;32m OK ?[0m] Reached target Login Prompts. [?[0;32m OK ?[0m] Reached target Sockets. Starting Armbian hardware optimization... [?[0;32m OK ?[0m] Started Emergency Shell. [?[0;32m OK ?[0m] Reached target Emergency Mode. Starting Create Volatile Files and Directories... Starting Armbian hardware monitoring... [?[0;32m OK ?[0m] Started Set console font and keymap. [?[0;32m OK ?[0m] Started Armbian hardware optimization. [?[0;32m OK ?[0m] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [?[0;32m OK ?[0m] Started Entropy daemon using the HAVEGE algorithm. [?[0;32m OK ?[0m] Reached target System Time Synchronized. [?[0;32m OK ?[0m] Started Update UTMP about System Boot/Shutdown. Starting Update UTMP about System Runlevel Changes... [?[0;32m OK ?[0m] Started Update UTMP about System Runlevel Changes. [?[0;32m OK ?[0m] Started Armbian ZRAM config. Starting Armbian memory supported logging... [?[0;32m OK ?[0m] Started Raise network interfaces. [?[0;32m OK ?[0m] Reached target Network. [?[0;32m OK ?[0m] Reached target Network is Online. [?[0;32m OK ?[0m] Started Armbian memory supported logging. You are in emergency mode. After logging in, type "journalctl -xGive root password for maintenance (or press Control-D to continue): [?[0;32m OK ?[0m] Stopped Emergency Shell. [?[0;1;31mFAILED?[0m] Failed to mount /media/mmcboot. See 'systemctl status media-mmcboot.mount' for details. [?[0;1;33mDEPEND?[0m] Dependency failed for /boot. [?[0;1;33mDEPEND?[0m] Dependency failed for Unattended Upgrades Shutdown. [?[0;1;33mDEPEND?[0m] Dependency failed for Local File Systems. Starting Update UTMP about System Runlevel Changes... [?[0;32m OK ?[0m] Started Emergency Shell. [?[0;32m OK ?[0m] Reached target Emergency Mode. [?[0;32m OK ?[0m] Closed Syslog Socket. [?[0;32m OK ?[0m] Started Update UTMP about System Runlevel Changes. You are in emergency mode. After logging in, type "journalctl -xGive root password for maintenance (or press Control-D to continue):