U-Boot SPL 2018.09-rc1-armbian (Nov 19 2018 - 00:47:24 +0100) DRAM: 4096 MiB Trying to boot from MMC1 NOTICE: BL31: v2.0(debug):cabe0a3 NOTICE: BL31: Built : 02:18:08, Nov 17 2018 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc070f88, model: Pine H64 INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2018.09-rc1-armbian (Nov 19 2018 - 00:47:24 +0100) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: Pine H64 DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from FAT... Card did not respond to voltage select! ** Bad device mmc 1 ** Failed (-5) Using device 'sun50i_dw_hdmi', disp_uc_priv=00000000b9f33320 fb=be000000, size=3840 2160 In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3090 bytes read in 12 ms (251 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 165 bytes read in 9 ms (17.6 KiB/s) 18862 bytes read in 37 ms (497.1 KiB/s) 4155 bytes read in 43 ms (93.8 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 44000000 8660823 bytes read in 886 ms (9.3 MiB/s) 14243848 bytes read in 1453 ms (9.3 MiB/s) ## Loading init Ramdisk from Legacy Image at 4fe00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 8660759 Bytes = 8.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 497bd000, end 49fff717 ... OK reserving fdt memory region: addr=4fa00000 size=6a000 Loading Device Tree to 0000000049750000, end 00000000497bcfff ... OK Setting up simplefb Cannot setup simplefb: node not found Starting kernel ... [ 2.111839] Internal error: Oops: 96000004 [#1] SMP [ 2.116725] Modules linked in: [ 2.119784] CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 4.19.2-sunxi64 #8 [ 2.126651] Hardware name: Pine H64 (DT) [ 2.130581] Workqueue: events deferred_probe_work_func [ 2.135719] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 2.140511] pc : sun8i_dwmac_probe+0x16c/0x550 [ 2.144954] lr : sun8i_dwmac_probe+0x21c/0x550 [ 2.149393] sp : ffff00000924bb00 [ 2.152705] x29: ffff00000924bb00 x28: 0000000000000000 [ 2.158016] x27: ffff000008d7e9a0 x26: ffff000008bf1420 [ 2.163326] x25: ffff800077fe1b88 x24: ffff000008c44000 [ 2.168636] x23: ffff8000751e7c10 x22: ffff8000751e7c00 [ 2.173945] x21: ffff800073a92c18 x20: ffff800073a8e198 [ 2.179255] x19: ffff000008d68000 x18: 0000000000008000 [ 2.184565] x17: 0000000000000001 x16: 0000000000000019 [ 2.189874] x15: 00000000fffffff0 x14: ffff000008c82000 [ 2.195184] x13: 6572206f74207265 x12: 0000000000000030 [ 2.200493] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 2.205804] x9 : 6061686d68656d68 x8 : ffff00000924b7c8 [ 2.211113] x7 : 0000000000000000 x6 : 0000000000000003 [ 2.216423] x5 : 0000000000000002 x4 : 0000000000000003 [ 2.221732] x3 : 0000000000000000 x2 : ffff00000924bb70 [ 2.227042] x1 : ffff800073a93000 x0 : ffff8000751e7c10 [ 2.232354] Process kworker/2:1 (pid: 33, stack limit = 0x(____ptrval____)) [ 2.239311] Call trace: [ 2.241761] sun8i_dwmac_probe+0x16c/0x550 [ 2.245860] platform_drv_probe+0x50/0xa0 [ 2.249870] really_probe+0x1c4/0x298 [ 2.253532] driver_probe_device+0x58/0x100 [ 2.257714] __device_attach_driver+0x98/0xf0 [ 2.262071] bus_for_each_drv+0x64/0xc8 [ 2.265905] __device_attach+0xd8/0x130 [ 2.269740] device_initial_probe+0x10/0x18 [ 2.273923] bus_probe_device+0x90/0x98 [ 2.277758] deferred_probe_work_func+0x74/0xb0 [ 2.282291] process_one_work+0x1e4/0x360 [ 2.286300] worker_thread+0x268/0x4b0 [ 2.290050] kthread+0x128/0x130 [ 2.293280] ret_from_fork+0x10/0x1c [ 2.296857] Code: f9401283 9101c3a2 aa1703e0 f9400463 (a9401464) [ 2.302948] ---[ end trace dc05d076c1002f0c ]--- [ 2.308093] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.333437] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB [ 2.336434] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.397531] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.409723] mmc0: new high speed SDHC card at address aaaa [ 2.416286] mmcblk0: mmc0:aaaa SE32G 29.7 GiB [ 2.422032] mmcblk0: p1