U-Boot SPL 2018.09-rc1-armbian (Nov 20 2018 - 14:52:56 -0500) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.0(debug):c385955 NOTICE: BL31: Built : 14:52:48, Nov 20 2018 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc070e28, model: OrangePi One Plus INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2018.09-rc1-armbian (Nov 20 2018 - 14:52:56 -0500) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi One Plus DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... Unable to use mmc 0:1... Failed (-5) Using device 'sun50i_dw_hdmi', disp_uc_priv=0000000079f33320 sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1) Using device 'sun50i_dw_hdmi', disp_uc_priv=0000000079f33320 sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1) In: serial Out: serial Err: serial Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3042 bytes read in 25 ms (118.2 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 116 bytes read in 20 ms (4.9 KiB/s) 18480 bytes read in 61 ms (294.9 KiB/s) 4155 bytes read in 78 ms (51.8 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 44000000 8643763 bytes read in 907 ms (9.1 MiB/s) 14243848 bytes read in 1472 ms (9.2 MiB/s) ## Loading init Ramdisk from Legacy Image at 4fe00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 8643699 Bytes = 8.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 497c1000, end 49fff473 ... OK reserving fdt memory region: addr=4fa00000 size=6a000 Loading Device Tree to 0000000049754000, end 00000000497c0fff ... OK Setting up simplefb DE3 present but not probed Starting kernel ... [ 1.987912] Internal error: Oops: 96000004 [#1] SMP [ 1.992795] Modules linked in: [ 1.995854] CPU: 1 PID: 33 Comm: kworker/1:1 Not tainted 4.19.2-sunxi64 #1 [ 2.002721] Hardware name: Orange Pi One+ (DT) [ 2.007171] Workqueue: events deferred_probe_work_func [ 2.012309] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 2.017100] pc : sun8i_dwmac_probe+0x16c/0x550 [ 2.021542] lr : sun8i_dwmac_probe+0x21c/0x550 [ 2.025980] sp : ffff0000090c3b00 [ 2.029292] x29: ffff0000090c3b00 x28: 0000000000000000 [ 2.034602] x27: ffff000008d7e9a0 x26: ffff000008bf1420 [ 2.039913] x25: ffff800037fe2308 x24: ffff000008c44000 [ 2.045223] x23: ffff800036067c10 x22: ffff800036067c00 [ 2.050534] x21: ffff800009856018 x20: ffff800036099298 [ 2.055844] x19: ffff000008d68000 x18: 0000000000008000 [ 2.061153] x17: 0000000000000001 x16: 0000000000000019 [ 2.066463] x15: 00000000fffffff0 x14: ffff000008c82000 [ 2.071774] x13: 6572206f74207265 x12: 0000000000000030 [ 2.077084] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 2.082394] x9 : 6061686d68656d68 x8 : ffff0000090c37c8 [ 2.087703] x7 : 0000000000000000 x6 : 0000000000000003 [ 2.093013] x5 : 0000000000000002 x4 : 0000000000000003 [ 2.098323] x3 : 0000000000000000 x2 : ffff0000090c3b70 [ 2.103633] x1 : ffff800009856400 x0 : ffff800036067c10 [ 2.108944] Process kworker/1:1 (pid: 33, stack limit = 0x(____ptrval____)) [ 2.115901] Call trace: [ 2.118350] sun8i_dwmac_probe+0x16c/0x550 [ 2.122449] platform_drv_probe+0x50/0xa0 [ 2.126458] really_probe+0x1c4/0x298 [ 2.130121] driver_probe_device+0x58/0x100 [ 2.134304] __device_attach_driver+0x98/0xf0 [ 2.138660] bus_for_each_drv+0x64/0xc8 [ 2.142495] __device_attach+0xd8/0x130 [ 2.146330] device_initial_probe+0x10/0x18 [ 2.150511] bus_probe_device+0x90/0x98 [ 2.154346] deferred_probe_work_func+0x74/0xb0 [ 2.158878] process_one_work+0x1e4/0x360 [ 2.162887] worker_thread+0x268/0x4b0 [ 2.166637] kthread+0x128/0x130 [ 2.169867] ret_from_fork+0x10/0x1c [ 2.173443] Code: f9401283 9101c3a2 aa1703e0 f9400463 (a9401464) [ 2.179533] ---[ end trace a695d8b03ea466e7 ]--- [ 2.184462] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.214304] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.271601] mmc0: host does not support reading read-only switch, assuming wr ite-enable [ 2.282872] mmc0: Problem switching card into high-speed mode! [ 2.288760] mmc0: new SDXC card at address 0001 [ 2.294176] mmcblk0: mmc0:0001 MS 58.3 GiB [ 2.302000] mmcblk0: p1