BOOTSOURCE='https://github.com/hardkernel/u-boot.git'
BOOTBRANCH='branch:odroidc-v2011.03'
BOOTDIR='u-boot-odroidc1'
UBOOT_USE_GCC='< 4.9'
BOOTSCRIPT="boot-odroid-c1.ini:boot.ini"

UBOOT_TARGET_MAP=';;sd_fuse/bl1.bin.hardkernel sd_fuse/u-boot.bin'

KERNEL_IMAGE_TYPE=uImage

case $BRANCH in
	default)
	KERNELSOURCE='https://github.com/hardkernel/linux'
	KERNELBRANCH='branch:odroidc-3.10.y'
	KERNELDIR='linux-odroidc1'
	KERNEL_USE_GCC='< 4.9'
	CAN_BUILD_STRETCH=no
	;;

	next)
	KERNELSOURCE=$MAINLINE_KERNEL_SOURCE
	KERNELBRANCH='branch:master'
	KERNELDIR=$MAINLINE_KERNEL_DIR

	KERNEL_USE_GCC='> 7.0'
	;;

	dev)
	KERNELSOURCE='https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git'
	KERNELBRANCH='branch:v5.0/fixes'
	KERNELDIR=$MAINLINE_KERNEL_DIR

	KERNEL_USE_GCC='> 7.0'
	;;
esac

CPUMIN=504000
CPUMAX=1632000
GOVERNOR=interactive

write_uboot_platform()
{
	dd if=$1/bl1.bin.hardkernel of=$2 bs=1 count=442 conv=fsync > /dev/null 2>&1
	dd if=$1/bl1.bin.hardkernel of=$2 bs=512 skip=1 seek=1 conv=fsync > /dev/null 2>&1
	dd if=$1/u-boot.bin of=$2 bs=512 seek=64 conv=fsync > /dev/null 2>&1
	dd if=/dev/zero of=$2 seek=1024 count=32 bs=512 conv=fsync > /dev/null 2>&1
}

family_tweaks()
{
	# enable service installed from BSP
	chroot $SDCARD /bin/bash -c "systemctl --no-reload enable odroid-c1-hdmi.service >/dev/null 2>&1"
	echo "#Allow ttyAML0 root" >> $SDCARD/etc/securetty
	echo "ttyAML0" >> $SDCARD/etc/securetty
}

family_tweaks_bsp()
{
	install -m 755 $SRC/packages/bsp/odroid/c1_init.sh $destination/usr/lib/armbian/c1_init.sh
	cp $SRC/packages/bsp/odroid/odroid-c1-hdmi.service $destination/lib/systemd/system/
}