U-Boot SPL 2018.11-armbian (Feb 08 2019 - 09:27:49 +0100)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2018.11-armbian (Feb 08 2019 - 09:27:49 +0100) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Cubietech Cubietruck
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
HDMI connected: Setting up a 1920x1080 hdmi console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Allwinner mUSB OTG (Peripheral)
SCSI:  Target spinup took 0 ms.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst

Net:   eth0: ethernet@1c50000
Warning: usb_ether using MAC address from ROM
, eth1: usb_ether
230454 bytes read in 22 ms (10 MiB/s)
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3798 bytes read in 14 ms (264.6 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
153 bytes read in 11 ms (12.7 KiB/s)
4921685 bytes read in 292 ms (16.1 MiB/s)
7323200 bytes read in 428 ms (16.3 MiB/s)
Found mainline kernel configuration
40903 bytes read in 31 ms (1.3 MiB/s)
5845 bytes read in 39 ms (145.5 KiB/s)
Applying kernel provided DT fixup script (sun7i-a20-fixup.scr)
## Executing script at 44000000
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    4921621 Bytes = 4.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
   Loading Ramdisk to 49b4e000, end 49fff915 ... OK
   reserving fdt memory region: addr=43000000 size=70000
   Loading Device Tree to 49adb000, end 49b4dfff ... OK

Starting kernel ...