U-Boot SPL 2019.04-armbian (Nov 18 2019 - 20:36:33 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2019.04-armbian (Nov 18 2019 - 20:36:33 +0000) Allwinner Technology CPU: Allwinner A83T (SUN8I 1673) Model: Banana Pi BPI-M3 DRAM: 2 GiB MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000' mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: No host cable detected: Port not available. USB1: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3798 bytes read in 2 ms (1.8 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 1 ms (150.4 KiB/s) 8633992 bytes read in 830 ms (9.9 MiB/s) 7690712 bytes read in 738 ms (9.9 MiB/s) Found mainline kernel configuration 35684 bytes read in 11 ms (3.1 MiB/s) ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 8633928 Bytes = 8.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 497c4000, end 49fffe48 ... OK Loading Device Tree to 49752000, end 497c3fff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 44.875241] reboot: Restarting system U-Boot SPL 2019.04-armbian (Nov 18 2019 - 20:36:33 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2019.04-armbian (Nov 18 2019 - 20:36:33 +0000) Allwinner Technology CPU: Allwinner A83T (SUN8I 1673) Model: Banana Pi BPI-M3 DRAM: 2 GiB MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000' mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: No host cable detected: Port not available. USB1: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3798 bytes read in 2 ms (1.8 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 1 ms (150.4 KiB/s) 8633992 bytes read in 830 ms (9.9 MiB/s) 7690712 bytes read in 739 ms (9.9 MiB/s) Found mainline kernel configuration 35684 bytes read in 11 ms (3.1 MiB/s) ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 8633928 Bytes = 8.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 497c4000, end 49fffe48 ... OK Loading Device Tree to 49752000, end 497c3fff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel.