DDR Version 1.13 20180801 In Channel 0: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,50MHz CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x4D MR14=0x4D MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride channel 0 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 ch 0 ddrconfig = 0x101, ddrsize = 0x40 ch 1 ddrconfig = 0x101, ddrsize = 0x40 pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD OUT U-Boot SPL board init U-Boot SPL 2017.09-armbian (Aug 17 2020 - 08:32:19) booted from SD Trying to boot from MMC2 NOTICE: BL31: v1.3(debug):65aa5ce NOTICE: BL31: Built : 10:47:37, Jun 19 2018 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1151): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-armbian (Aug 17 2020 - 08:32:19 +0200) Model: Pine64 RockPro64 DRAM: 3.9 GiB DCDC_REG1@vdd_center: ; enabling DCDC_REG2@vdd_cpu_l: ; enabling DCDC_REG3@vcc_ddr: ; enabling (ret: -38) DCDC_REG4@vcc_1v8: set 1800000 uV; enabling LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling LDO_REG4@vcc_sd: set 3300000 uV; enabling LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling LDO_REG6@vcc_1v5: set 1500000 uV; enabling LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling LDO_REG8@vcc_3v0: set 3000000 uV; enabling SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38) SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38) vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38) dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38) vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38) vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38) vcc-phy-regulator@vcc_phy: ; enabling (ret: -38) vdd-log@vdd_log: ; enabling (ret: -38) MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Pine64 RockPro64 boot mode 0. Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 20 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 3185 bytes read in 23 ms (134.8 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 180 bytes read in 19 ms (8.8 KiB/s) 13262336 bytes read in 1437 ms (8.8 MiB/s) 23982592 bytes read in 2574 ms (8.9 MiB/s) 74916 bytes read in 87 ms (840.8 KiB/s) 2698 bytes read in 39 ms (67.4 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 09000000 ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 13262272 Bytes = 12.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f525b000, end f5f00dc0 ... OK reserving fdt memory region: addr=1f00000 size=78000 Loading Device Tree to 00000000f51e0000, end 00000000f525afff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.7.15-rockchip64 (root@desktop) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)), GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.08 SMP PREEMPT Mon Aug 17 00:26:28 CEST 2020 [ 0.000000] Machine model: Pine64 RockPro64 v2.1 [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 128 MiB at 0x00000000ed000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xf77e1100-0xf77e2fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] On node 0 totalpages: 1015296 [ 0.000000] DMA zone: 4088 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 261632 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 11776 pages used for memmap [ 0.000000] DMA32 zone: 753664 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 32 pages/cpu s92568 r8192 d30312 u131072 [ 0.000000] pcpu-alloc: s92568 r8192 d30312 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: mmc_cmdqueue=0 earlycon=uart8250,mmio32,0xff1a0000 root=UUID=c5d9dbc4-584c-4423-8206-883c1c800183 rootwait rootfstype=ext4 bootsplash.bootfile=bootsplash.armbian console=ttyS2,1500000 consoleblank=0 loglevel=9 ubootpart=6ad90d98-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB) [ 0.000000] Memory: 3745896K/4061184K available (14332K kernel code, 2044K rwdata, 5908K rodata, 1088K init, 573K bss, 184216K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6d00000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000000f6ca0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6cb0000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x828 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002472] Console: colour dummy device 80x25 [ 0.003013] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003980] pid_max: default: 32768 minimum: 301 [ 0.004582] LSM: Security Framework initializing [ 0.005049] Yama: becoming mindful. [ 0.005519] AppArmor: AppArmor initialized [ 0.006005] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.006741] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.010581] rcu: Hierarchical SRCU implementation. [ 0.013783] Platform MSI: interrupt-controller@fee20000 domain created [ 0.014875] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.018083] EFI services will not be available. [ 0.019182] smp: Bringing up secondary CPUs ... [ 0.020607] Detected VIPT I-cache on CPU1 [ 0.020647] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.020665] GICv3: CPU1: using allocated LPI pending table @0x00000000f6cc0000 [ 0.020721] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.021789] Detected VIPT I-cache on CPU2 [ 0.021819] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.021834] GICv3: CPU2: using allocated LPI pending table @0x00000000f6cd0000 [ 0.021872] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.022884] Detected VIPT I-cache on CPU3 [ 0.022913] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.022928] GICv3: CPU3: using allocated LPI pending table @0x00000000f6ce0000 [ 0.022963] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.026860] CPU features: detected: EL2 vector hardening [ 0.027268] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware [ 0.027625] CPU features: detected: ARM erratum 1319367 [ 0.027925] Detected PIPT I-cache on CPU4 [ 0.029173] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.029670] GICv3: CPU4: using allocated LPI pending table @0x00000000f6cf0000 [ 0.031022] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] [ 0.041436] Detected PIPT I-cache on CPU5 [ 0.042674] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.043145] GICv3: CPU5: using allocated LPI pending table @0x00000000f6d80000 [ 0.044382] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] [ 0.050850] smp: Brought up 1 node, 6 CPUs [ 0.064429] SMP: Total of 6 processors activated. [ 0.064909] CPU features: detected: 32-bit EL0 Support [ 0.065420] CPU features: detected: CRC32 instructions [ 0.295362] CPU: All CPU(s) started at EL2 [ 0.296760] alternatives: patching kernel code [ 0.303054] devtmpfs: initialized [ 0.328225] Registered cp15_barrier emulation handler [ 0.329037] Registered setend emulation handler [ 0.330455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.331440] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.339342] xor: measuring software checksum speed [ 0.377924] 8regs : 1186.000 MB/sec [ 0.418173] 32regs : 1361.000 MB/sec [ 0.458457] arm64_neon: 1068.000 MB/sec [ 0.458853] xor: using function: 32regs (1361.000 MB/sec) [ 0.459458] pinctrl core: initialized pinctrl subsystem [ 0.461417] thermal_sys: Registered thermal governor 'fair_share' [ 0.461425] thermal_sys: Registered thermal governor 'bang_bang' [ 0.462002] thermal_sys: Registered thermal governor 'step_wise' [ 0.462741] thermal_sys: Registered thermal governor 'user_space' [ 0.464232] DMI not present or invalid. [ 0.466369] NET: Registered protocol family 16 [ 0.486270] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.486982] audit: initializing netlink subsys (disabled) [ 0.488172] audit: type=2000 audit(0.480:1): state=initialized audit_enabled=0 res=1 [ 0.491609] cpuidle: using governor menu [ 0.492725] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.496094] ASID allocator initialised with 65536 entries [ 0.499066] Serial: AMBA PL011 UART driver [ 0.573368] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.574077] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.574709] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.575337] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.583654] cryptd: max_cpu_qlen set to 1000 [ 0.664992] raid6: neonx8 gen() 1051 MB/s [ 0.733346] raid6: neonx8 xor() 782 MB/s [ 0.801834] raid6: neonx4 gen() 1084 MB/s [ 0.870491] raid6: neonx4 xor() 776 MB/s [ 0.938809] raid6: neonx2 gen() 1024 MB/s [ 1.007222] raid6: neonx2 xor() 726 MB/s [ 1.075642] raid6: neonx1 gen() 897 MB/s [ 1.144052] raid6: neonx1 xor() 613 MB/s [ 1.212472] raid6: int64x8 gen() 745 MB/s [ 1.280875] raid6: int64x8 xor() 392 MB/s [ 1.349289] raid6: int64x4 gen() 833 MB/s [ 1.417710] raid6: int64x4 xor() 420 MB/s [ 1.486126] raid6: int64x2 gen() 707 MB/s [ 1.554535] raid6: int64x2 xor() 366 MB/s [ 1.622974] raid6: int64x1 gen() 528 MB/s [ 1.691361] raid6: int64x1 xor() 280 MB/s [ 1.691764] raid6: using algorithm neonx4 gen() 1084 MB/s [ 1.692270] raid6: .... xor() 776 MB/s, rmw enabled [ 1.692729] raid6: using neon recovery algorithm [ 1.696505] vcc3v3_pcie: supplied by vcc12v_dcin [ 1.699629] vcc5v0_sys: supplied by vcc12v_dcin [ 1.700626] vcc5v0_usb: supplied by vcc12v_dcin [ 1.701358] vcc3v3_sys: supplied by vcc5v0_sys [ 1.702598] iommu: Default domain type: Translated [ 1.708772] vgaarb: loaded [ 1.710325] SCSI subsystem initialized [ 1.711962] libata version 3.00 loaded. [ 1.712711] usbcore: registered new interface driver usbfs [ 1.713304] usbcore: registered new interface driver hub [ 1.714245] usbcore: registered new device driver usb [ 1.715692] pps_core: LinuxPPS API ver. 1 registered [ 1.716161] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.717029] PTP clock support registered [ 1.717835] EDAC MC: Ver: 3.0.0 [ 1.720500] NetLabel: Initializing [ 1.720835] NetLabel: domain hash size = 128 [ 1.721244] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.721871] NetLabel: unlabeled traffic allowed by default [ 1.724790] clocksource: Switched to clocksource arch_sys_counter [ 1.900707] VFS: Disk quotas dquot_6.6.0 [ 1.901273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.903339] AppArmor: AppArmor Filesystem Enabled [ 1.917583] NET: Registered protocol family 2 [ 1.920057] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.921198] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.922508] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.923929] TCP: Hash tables configured (established 32768 bind 32768) [ 1.925143] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.925946] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.927142] NET: Registered protocol family 1 [ 1.927595] NET: Registered protocol family 44 [ 1.928027] PCI: CLS 0 bytes, default 64 [ 1.929019] Trying to unpack rootfs image as initramfs... [ 3.203732] Freeing initrd memory: 12948K [ 3.219271] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 3.223190] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.225491] kvm [1]: IPA Size Limit: 40bits [ 3.227476] kvm [1]: vgic-v2@fff20000 [ 3.228195] kvm [1]: GIC system register CPU interface enabled [ 3.231565] kvm [1]: vgic interrupt IRQ10 [ 3.234488] kvm [1]: Hyp mode initialized successfully [ 3.258378] Initialise system trusted keyrings [ 3.258986] Key type blacklist registered [ 3.260174] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 3.272448] zbud: loaded [ 3.275908] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.278948] fuse: init (API version 7.31) [ 3.282322] integrity: Platform Keyring initialized [ 3.310121] Key type asymmetric registered [ 3.310541] Asymmetric key parser 'x509' registered [ 3.311202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.312565] io scheduler mq-deadline registered [ 3.312995] io scheduler kyber registered [ 3.313754] io scheduler bfq registered [ 3.322111] vcc5v0_host: supplied by vcc5v0_usb [ 3.348825] rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy regulator [ 3.349793] rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy regulator [ 3.388890] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 3.389601] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 3.390409] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 3.391786] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 3.392465] pci_bus 0000:00: root bus resource [bus 00-1f] [ 3.392987] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 3.393638] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 3.394576] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 3.395323] pci 0000:00:00.0: supports D1 [ 3.395707] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.403880] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.405073] pci 0000:01:00.0: [15b7:5002] type 00 class 0x010802 [ 3.405792] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.406543] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit] [ 3.407247] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512) [ 3.408611] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 3.427839] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 [ 3.428591] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff] [ 3.429318] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit] [ 3.430058] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa004000-0xfa0040ff 64bit] [ 3.430799] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.431276] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] [ 3.432500] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 3.433931] pcieport 0000:00:00.0: PME: Signaling with IRQ 231 [ 3.436687] pcieport 0000:00:00.0: AER: enabled with IRQ 231 [ 3.447303] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 3.448055] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 3.451751] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 3.452549] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 3.459927] pwm-regulator: supplied by regulator-dummy [ 3.461302] vcc5v0_typec: supplied by vcc5v0_usb [ 3.464689] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 3.471147] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A [ 3.472937] serial serial0: tty port ttyS0 registered [ 3.474515] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A [ 3.475702] printk: console [ttyS2] enabled [ 3.475702] printk: console [ttyS2] enabled [ 3.476703] printk: bootconsole [uart8250] disabled [ 3.476703] printk: bootconsole [uart8250] disabled [ 3.479766] Serial: AMBA driver [ 3.482655] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 3.503861] loop: module loaded [ 3.510020] nvme nvme0: pci function 0000:01:00.0 [ 3.511053] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 3.518960] spi-nor spi0.0: gd25q128 (16384 Kbytes) [ 3.537839] nvme nvme0: 6/0/0 default/read/poll queues [ 3.556190] libphy: Fixed MDIO Bus: probed [ 3.557340] tun: Universal TUN/TAP device driver, 1.6 [ 3.559717] thunder_xcv, ver 1.0 [ 3.560081] thunder_bgx, ver 1.0 [ 3.560521] nicpf, ver 1.0 [ 3.562336] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.562854] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.563474] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 3.564089] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.564692] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.565382] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.566309] sky2: driver version 1.30 [ 3.567703] VFIO - User Level meta-driver version: 0.3 [ 3.578131] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port [ 3.591447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.592131] ehci-pci: EHCI PCI platform driver [ 3.592700] ehci-platform: EHCI generic platform driver [ 3.595992] ehci-platform fe380000.usb: EHCI Host Controller [ 3.596623] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 [ 3.597817] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000 [ 3.612464] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 3.613537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 3.614271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.614913] usb usb1: Product: EHCI Host Controller [ 3.615351] usb usb1: Manufacturer: Linux 5.7.15-rockchip64 ehci_hcd [ 3.615916] usb usb1: SerialNumber: fe380000.usb [ 3.617523] hub 1-0:1.0: USB hub found [ 3.617908] hub 1-0:1.0: 1 port detected [ 3.621530] ehci-platform fe3c0000.usb: EHCI Host Controller [ 3.622076] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 [ 3.623125] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000 [ 3.636390] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 3.637272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 3.638008] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.638648] usb usb2: Product: EHCI Host Controller [ 3.639085] usb usb2: Manufacturer: Linux 5.7.15-rockchip64 ehci_hcd [ 3.639649] usb usb2: SerialNumber: fe3c0000.usb [ 3.640981] hub 2-0:1.0: USB hub found [ 3.641365] hub 2-0:1.0: 1 port detected [ 3.642890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.643464] ohci-pci: OHCI PCI platform driver [ 3.643961] ohci-platform: OHCI generic platform driver [ 3.645005] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 3.645636] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 [ 3.646652] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000 [ 3.708698] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 3.709431] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.710072] usb usb3: Product: Generic Platform OHCI controller [ 3.710600] usb usb3: Manufacturer: Linux 5.7.15-rockchip64 ohci_hcd [ 3.711165] usb usb3: SerialNumber: fe3a0000.usb [ 3.712476] hub 3-0:1.0: USB hub found [ 3.712874] hub 3-0:1.0: 1 port detected [ 3.714215] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 3.714841] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 [ 3.715770] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000 [ 3.780681] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07 [ 3.781415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.782056] usb usb4: Product: Generic Platform OHCI controller [ 3.782584] usb usb4: Manufacturer: Linux 5.7.15-rockchip64 ohci_hcd [ 3.783148] usb usb4: SerialNumber: fe3e0000.usb [ 3.784413] hub 4-0:1.0: USB hub found [ 3.784810] hub 4-0:1.0: 1 port detected [ 3.787599] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.788157] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 3.789298] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.790191] xhci-hcd xhci-hcd.0.auto: irq 239, io mem 0xfe800000 [ 3.791572] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 3.792346] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.792987] usb usb5: Product: xHCI Host Controller [ 3.793426] usb usb5: Manufacturer: Linux 5.7.15-rockchip64 xhci-hcd [ 3.793990] usb usb5: SerialNumber: xhci-hcd.0.auto [ 3.795351] hub 5-0:1.0: USB hub found [ 3.795760] hub 5-0:1.0: 1 port detected [ 3.796886] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.797406] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 3.798101] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 3.798794] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.799703] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07 [ 3.800482] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.801122] usb usb6: Product: xHCI Host Controller [ 3.801559] usb usb6: Manufacturer: Linux 5.7.15-rockchip64 xhci-hcd [ 3.802125] usb usb6: SerialNumber: xhci-hcd.0.auto [ 3.803376] hub 6-0:1.0: USB hub found [ 3.803764] hub 6-0:1.0: 1 port detected [ 3.805345] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.805869] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 3.806822] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 3.807860] xhci-hcd xhci-hcd.1.auto: irq 240, io mem 0xfe900000 [ 3.809139] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 3.809873] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.810513] usb usb7: Product: xHCI Host Controller [ 3.810950] usb usb7: Manufacturer: Linux 5.7.15-rockchip64 xhci-hcd [ 3.811515] usb usb7: SerialNumber: xhci-hcd.1.auto [ 3.812963] hub 7-0:1.0: USB hub found [ 3.813345] hub 7-0:1.0: 1 port detected [ 3.814283] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.814789] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 [ 3.815480] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.816186] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.817133] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07 [ 3.817865] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.818506] usb usb8: Product: xHCI Host Controller [ 3.818943] usb usb8: Manufacturer: Linux 5.7.15-rockchip64 xhci-hcd [ 3.819508] usb usb8: SerialNumber: xhci-hcd.1.auto [ 3.820703] hub 8-0:1.0: USB hub found [ 3.821084] hub 8-0:1.0: 1 port detected [ 3.822324] usbcore: registered new interface driver usb-storage [ 3.827886] mousedev: PS/2 mouse device common for all mice [ 3.830705] i2c /dev entries driver [ 3.837640] rk808 0-001b: chip id: 0x0 [ 3.845542] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 3.846199] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 3.846882] DCDC_REG1: supplied by vcc5v0_sys [ 3.848628] DCDC_REG2: supplied by vcc5v0_sys [ 3.849750] DCDC_REG3: supplied by vcc5v0_sys [ 3.850599] DCDC_REG4: supplied by vcc5v0_sys [ 3.851742] LDO_REG1: supplied by vcc5v0_sys [ 3.853619] LDO_REG2: supplied by vcc5v0_sys [ 3.855304] LDO_REG3: supplied by vcc5v0_sys [ 3.856963] LDO_REG4: supplied by vcc5v0_sys [ 3.857571] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV [ 3.859441] LDO_REG5: supplied by vcc5v0_sys [ 3.860975] LDO_REG6: supplied by vcc5v0_sys [ 3.862640] LDO_REG7: supplied by vcc5v0_sys [ 3.864206] LDO_REG8: supplied by vcc5v0_sys [ 3.866232] SWITCH_REG1: supplied by vcc3v3_sys [ 3.867237] SWITCH_REG2: supplied by vcc3v3_sys [ 3.872892] rk808-rtc rk808-rtc: registered as rtc0 [ 3.874123] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:12 UTC (1358499012) [ 3.876033] random: fast init done [ 3.876418] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 3.877074] fan53555-reg: supplied by vcc5v0_sys [ 3.879013] vcc1v8_s3: supplied by vcc_1v8 [ 3.880554] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 3.881193] fan53555-reg: supplied by vcc5v0_sys [ 3.901323] sdhci: Secure Digital Host Controller Interface driver [ 3.901953] sdhci: Copyright(c) Pierre Ossman [ 3.902380] Synopsys Designware Multimedia Card Interface Driver [ 3.905620] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode. [ 3.906339] dwmmc_rockchip fe310000.mmc: Using internal DMA controller. [ 3.906937] dwmmc_rockchip fe310000.mmc: Version ID is 270a [ 3.907696] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo [ 3.909511] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq [ 3.910029] mmc_host mmc0: card is non-removable. [ 3.924174] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 3.940353] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 3.941272] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 3.941905] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 3.942639] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo [ 3.943850] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 3.957662] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 3.967331] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 3.973716] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.977365] mmc2: CQHCI version 5.10 [ 4.005864] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA [ 4.010436] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 4.016675] ledtrig-cpu: registered to indicate activity on CPUs [ 4.019015] hid: raw HID events driver (C) Jiri Kosina [ 4.019849] usbcore: registered new interface driver usbhid [ 4.020634] usbhid: USB HID core driver [ 4.030283] drop_monitor: Initializing network drop monitor service [ 4.032609] NET: Registered protocol family 10 [ 4.039220] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 4.041365] mmc1: new high speed SDXC card at address e624 [ 4.048047] mmcblk1: mmc1:e624 SR64G 59.5 GiB [ 4.057505] mmcblk1: p1 p2 [ 4.066032] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 4.114838] Segment Routing with IPv6 [ 4.115483] NET: Registered protocol family 17 [ 4.116242] 8021q: 802.1Q VLAN Support v1.8 [ 4.116849] Key type dns_resolver registered [ 4.118694] registered taskstats version 1 [ 4.119121] Loading compiled-in X.509 certificates [ 4.126591] Loaded X.509 cert 'Build time autogenerated kernel key: 6404966c2c5febbd8c2be8cba1101271d625fce5' [ 4.128164] zswap: loaded using pool lzo/zbud [ 4.130342] Key type ._fscrypt registered [ 4.130712] Key type .fscrypt registered [ 4.131063] Key type fscrypt-provisioning registered [ 4.142175] Btrfs loaded, crc32c=crc32c-generic [ 4.142877] Key type big_key registered [ 4.181138] Key type encrypted registered [ 4.181652] AppArmor: AppArmor sha1 policy hashing enabled [ 4.266904] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.271783] of_cfs_init [ 4.272133] of_cfs_init: OK [ 4.274890] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console [ 4.276274] Freeing unused kernel memory: 1088K [ 4.277931] Run /init as init process [ 4.278275] with arguments: [ 4.278544] /init [ 4.278752] with environment: [ 4.279037] HOME=/ [ 4.279251] TERM=linux [ 4.279497] mmc_cmdqueue=0 [ 4.279773] ubootpart=6ad90d98-01 [ 4.280105] cgroup_enable=memory [ 4.280463] cgroup_memory=1 Loading, please wait... Starting version 241 [ 5.574767] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found [ 5.575449] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found [ 5.577124] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock [ 5.578221] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 5.578858] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 5.579368] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). [ 5.579887] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 5.580825] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ 5.581449] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 5.587061] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 5.595277] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 5.595979] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 [ 5.596571] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported [ 5.597245] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported [ 5.597915] rk_gmac-dwmac fe300000.ethernet: COE Type 2 [ 5.598382] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported [ 5.599007] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported [ 5.599833] rk_gmac-dwmac fe300000.ethernet: Normal descriptors [ 5.600549] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled [ 5.601077] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 6.030201] libphy: stmmac: probed [ 6.031943] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 6.035692] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1 /dev/mmcblk1p1: Superblock last mount time (Mon Aug 31 12:18:46 2020, now = Fri Jan 18 08:50:16 2013) is in the future. FIXED. /dev/mmcblk1p1: Superblock last write time (Mon Aug 31 12:20:25 2020, now = Fri Jan 18 08:50:16 2013) is in the future. FIXED. /dev/mmcblk1p1: 123182/512000 files (0.2% non-contiguous), 873245/2097152 blocks done. [ 13.106800] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 14.195071] systemd[1]: System time before build time, advancing clock. [ 14.232673] systemd[1]: Inserted module 'autofs4' [ 14.344588] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 14.348665] systemd[1]: Detected architecture arm64. Welcome to Armbian 20.08 Buster! [ 14.391116] systemd[1]: Set hostname to . [ 15.784688] random: systemd: uninitialized urandom read (16 bytes read) [ 15.808333] random: systemd: uninitialized urandom read (16 bytes read) [ 15.812595] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 15.815801] random: systemd: uninitialized urandom read (16 bytes read) [ 15.818608] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 15.831192] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 15.834334] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 15.836279] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 15.849795] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 15.860744] systemd[1]: Reached target System Time Synchronized. [ OK ] Reached target System Time Synchronized. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Journal Socket. Starting Set the console keyboard layout... Mounting Huge Pages File System... Starting Nameserver information manager... Mounting POSIX Message Queue File System... Starting Restore / save the current clock... Mounting Kernel Debug File System... [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Set up automount Arbitrary…s File System Automount Point. Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... [ OK ] Listening on Journal Socket (/dev/log). Starting Create list of re…odes for the current kernel... [ OK ] Reached target Remote File Systems. [ OK ] Reached target Local Encrypted Volumes. [ 16.421064] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers [ 16.439212] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro Starting udev Coldplug all Devices... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Restore / save the current clock. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of req… nodes for the current kernel. [ OK ] Started Nameserver information manager. Starting Create System Users... Starting Load/Save Random Seed... Mounting Kernel Configuration File System... Mounting FUSE Control File System... Starting Apply Kernel Variables... [ OK ] Started Load/Save Random Seed. [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Create System Users. [ OK ] Started Apply Kernel Variables. [ OK ] Started Set the console keyboard layout. Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting udev Kernel Device Manager... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Armbian ZRAM config... Starting Set console font and keymap... [ OK ] Started udev Coldplug all Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Set console font and keymap. [ OK ] Started Helper to synchronize boot up for ifupdown. Starting Raise network interfaces... [ OK ] Started udev Kernel Device Manager. [ 19.120843] zram: Added device: zram0 [ 19.129921] zram: Added device: zram1 [ 19.136195] zram: Added device: zram2 [ 19.705121] zram1: detected capacity change from 0 to 1073741824 [ 20.151575] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz [ 20.158345] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz [ 20.171189] systemd[1]: Found device /dev/ttyS2. [ OK ] Found device /dev/ttyS2. [ 20.290489] Bluetooth: Core ver 2.22 [ 20.292027] NET: Registered protocol family 31 [ 20.292559] Bluetooth: HCI device and connection manager initialized [ 20.297691] Bluetooth: HCI socket layer initialized [ 20.302960] Bluetooth: L2CAP socket layer initialized [ 20.303420] Bluetooth: SCO socket layer initialized [ 20.346888] mc: Linux media interface: v0.10 [ 20.354465] typec_fusb302 4-0022: No cable types defined, using default cables [ 20.355284] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22 [ 20.396865] systemd[1]: Started Raise network interfaces. [ OK ] Started Raise network interfaces. [ 20.422493] videodev: Linux video capture interface: v2.00 [ 20.474431] es8316 1-0011: Failed to get IRQ 0: -22 [ 20.494942] Bluetooth: HCI UART driver ver 2.3 [ 20.495337] Bluetooth: HCI UART protocol H4 registered [ 20.495811] Bluetooth: HCI UART protocol BCSP registered [ 20.496347] Bluetooth: HCI UART protocol LL registered [ 20.496796] Bluetooth: HCI UART protocol ATH3K registered [ 20.505021] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.505726] Bluetooth: HCI UART protocol Intel registered [ 20.506283] Bluetooth: HCI UART protocol Broadcom registered [ 20.506793] Bluetooth: HCI UART protocol QCA registered [ 20.507249] Bluetooth: HCI UART protocol AG6XX registered [ 20.507767] Bluetooth: HCI UART protocol Marvell registered [ 20.512610] panfrost ff9a0000.gpu: clock rate = 500000000 [ 20.513534] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 20.514219] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400 [ 20.514936] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 20.515965] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 20.518121] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 20.518799] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0 [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 20.534094] systemd[1]: Created slice system-zram\x2dsetup.slice. [ OK ] Created slice system-zram\x2dsetup.slice. [ 20.544738] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 20.545631] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 20.546467] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 20.547347] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 20.564628] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mapping ok [ 20.565312] asoc-audio-graph-card sound: ASoC: no DMI vendor name! [ 20.601171] rockchip-rga ff680000.rga: HW Version: 0x03.02 [ 20.602045] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0 [ 20.623807] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 20.624578] dw-apb-uart ff180000.serial: failed to request DMA [ 20.626729] rkvdec ff660000.video-codec: Adding to iommu group 1 [ 20.631360] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 20.635224] hantro-vpu ff650000.video-codec: Adding to iommu group 0 [ 20.636483] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2 [ 20.637530] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3 [ 20.639339] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 20.641525] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ 20.832391] Adding 1048572k swap on /dev/zram1. Priority:5 extents:1 across:1048572k SSFS [ 20.997979] zram0: detected capacity change from 0 to 52428800 [ 22.764389] Bluetooth: hci0: command 0x0c03 tx timeout [ OK ] Started Armbian ZRAM config. Starting Armbian memory supported logging... [ 23.165336] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 23.166008] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 25.377070] random: crng init done [ 25.377387] random: 7 urandom warning(s) missed due to ratelimiting [ 25.402153] systemd[1]: Started Armbian memory supported logging. [ OK ] Started Armbian memory supported logging. [ 25.423017] systemd[1]: Starting Journal Service... Starting Journal Service... [ 25.531182] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ 25.591589] systemd-journald[652]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. Starting Armbian hardware monitoring... [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Starting Armbian hardware optimization... [ OK ] Listening on CUPS Scheduler. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily man-db regeneration. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started CUPS Scheduler. [ OK ] Reached target Paths. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Armbian hardware monitoring. [ OK ] Started Armbian hardware optimization. [ OK ] Reached target Basic System. Starting LSB: Load kernel …d to enable cpufreq scaling... Starting Avahi mDNS/DNS-SD Stack... Starting Bluetooth service... [ OK ] Started D-Bus System Message Bus. Starting WPA supplicant... Starting Network Manager... Starting rng-tools.service... Starting Dispatcher daemon for systemd-networkd... Starting Disk Manager... Starting Resets System Activity Data Collector... Starting Setup zram based device zram1... Starting System Logging Service... Starting Setup zram based device zram0... [ OK ] Started Regular background program processing daemon. Starting Login Service... [ OK ] Started Manage Sound Card State (restore and store). Starting Save/Restore Sound Card State... Starting Setup zram based device zram2... [ OK ] Started Resets System Activity Data Collector. [ OK ] Started rng-tools.service. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Setup zram based device zram1. [ OK ] Started Setup zram based device zram0. [ OK ] Started Setup zram based device zram2. [ OK ] Reached target Sound Card. [ OK ] Started System Logging Service. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. [ OK ] Started Login Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ 27.032609] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.033086] Bluetooth: BNEP filters: protocol multicast [ 27.033558] Bluetooth: BNEP socket layer initialized [ OK ] Started WPA supplicant. Starting Hostname Service... [ OK ] Reached target Bluetooth. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started Hostname Service. Starting Authorization Manager... [ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Started Authorization Manager. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting OpenVPN service... Starting chrony, an NTP client/server... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting /etc/rc.local Compatibility... [ OK ] Started Permit User Sessions. [ OK ] Started OpenVPN service. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started /etc/rc.local Compatibility. Starting Network Manager Script Dispatcher Service... Starting Light Display Manager... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. [ OK ] Started chrony, an NTP client/server. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Disk Manager. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Light Display Manager. [ 28.072487] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 28.075521] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 28.076196] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 28.076861] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Armbian 20.08 Buster ttyS2 rockpro64 login: [ 30.956337] Bluetooth: hci0: BCM: Reset failed (-110) [ 32.173043] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 32.173842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready rockpro64 login: root Password: Last login: Mon Aug 31 11:32:34 UTC 2020 on ttyS2 ____ _ ____ __ _ _ | _ \ ___ ___| | _| _ \ _ __ ___ / /_ | || | | |_) / _ \ / __| |/ / |_) | '__/ _ \ | '_ \| || |_ | _ < (_) | (__| <| __/| | | (_) | | (_) |__ _| |_| \_\___/ \___|_|\_\_| |_| \___/ \___/ |_| Welcome to Armbian 20.08 Buster with Linux 5.7.15-rockchip64 System load: 0.35 0.29 0.12 Up time: 2 min Memory usage: 3 % of 3799MB IP: 192.168.23.232 CPU temp: 36°C Usage of /: 43% of 7.9G [ General system configuration (beta): armbian-config ] root@rockpro64:~#