U-Boot SPL 2020.10-armbian (Aug 08 2021 - 15:22:00 +0200) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.5(debug):87311b4-dirty NOTICE: BL31: Built : 15:21:56, Aug 8 2021 NOTICE: BL31: Detected Allwinner H5 SoC (1718) NOTICE: BL31: Found U-Boot DTB at 0x2090088, model: FriendlyARM NanoPi NEO Plus2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller NOTICE: PMIC: Assuming H5 reference regulator design INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 alloc space exhausted U-Boot 2020.10-armbian (Aug 08 2021 - 15:22:00 +0200) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: FriendlyARM NanoPi NEO Plus2 DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 1:1... In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 230454 bytes read in 15 ms (14.7 MiB/s) starting USB... Bus usb@1c1a000: USB EHCI 1.00 Bus usb@1c1a400: USB OHCI 1.0 Bus usb@1c1d000: USB EHCI 1.00 Bus usb@1c1d400: USB OHCI 1.0 scanning bus usb@1c1a000 for devices... 1 USB Device(s) found scanning bus usb@1c1a400 for devices... 1 USB Device(s) found scanning bus usb@1c1d000 for devices... 1 USB Device(s) found scanning bus usb@1c1d400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3202 bytes read in 4 ms (781.3 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 205 bytes read in 3 ms (66.4 KiB/s) 31334 bytes read in 10 ms (3 MiB/s) 502 bytes read in 8 ms (60.5 KiB/s) Applying kernel provided DT overlay sun50i-h5-uart1.dtbo 374 bytes read in 8 ms (44.9 KiB/s) Applying kernel provided DT overlay sun50i-h5-i2c0.dtbo 1362 bytes read in 6 ms (221.7 KiB/s) Applying user provided DT overlay sun50i-h5-i2s0-out.dtbo 4191 bytes read in 9 ms (454.1 KiB/s) Applying kernel provided DT fixup script (sun50i-h5-fixup.scr) ## Executing script at 45000000 11833431 bytes read in 569 ms (19.8 MiB/s) 21860360 bytes read in 1048 ms (19.9 MiB/s) Moving Image from 0x40080000 to 0x40200000, end=41740000 ## Loading init Ramdisk from Legacy Image at 4fe00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 11833367 Bytes = 11.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 EHCI failed to shut down host controller. Loading Ramdisk to 494b6000, end 49fff017 ... OK Loading Device Tree to 0000000049446000, end 00000000494b5fff ... OK Starting kernel ... Loading, please wait... Starting version 245.4-4ubuntu3.13 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.34 [/usr/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 NAGFS: clean, 51050/585568 files, 603890/1887232 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. run-init: can't [ 4.367333] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 execute '/sbin/i[ 4.376316] CPU: 1 PID: 1 Comm: run-init Not tainted 5.10.60-sunxi64 #21.08.1 nit': Exec forma[ 4.384811] Hardware name: FriendlyARM NanoPi NEO Plus2 (DT) t error [ 4.391844] Call trace: [ 4.395077] dump_backtrace+0x0/0x200 [ 4.398738] show_stack+0x18/0x60 [ 4.402053] dump_stack+0xd8/0x134 [ 4.405456] panic+0x164/0x318 [ 4.408510] do_exit+0x9ec/0xa20 [ 4.411736] do_group_exit+0x44/0xa8 [ 4.415308] __wake_up_parent+0x0/0x30 [ 4.419057] el0_svc_common.constprop.4+0x8c/0x180 [ 4.423843] do_el0_svc+0x24/0x90 [ 4.427158] el0_svc+0x14/0x20 [ 4.430212] el0_sync_handler+0x90/0xb8 [ 4.434043] el0_sync+0x160/0x180 [ 4.437360] SMP: stopping secondary CPUs [ 4.441282] Kernel Offset: disabled [ 4.444766] CPU features: 0x0040002,20002004 [ 4.449028] Memory Limit: none [ 4.452089] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---