U-Boot TPL 2022.04-armbian (Oct 07 2022 - 15:10:04)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2022.04-armbian (Oct 07 2022 - 15:10:04 +0300)
Trying to boot from MMC1
NOTICE:  BL31: v2.6(release):a1f02f4f-dirty
NOTICE:  BL31: Built : 15:09:52, Oct  7 2022


U-Boot 2022.04-armbian (Oct 07 2022 - 15:10:04 +0300)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
Core:  330 devices, 28 uclasses, devicetree: separate
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   dw_dm_mdio_init: mdio node is missing, registering legacy mdio busNo ethernet found.

scanning bus for devices...
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
75212 bytes read in 17 ms (4.2 MiB/s)
Scanning disk mmc@fe320000.blk...
Scanning disk mmc@fe330000.blk...
Found 4 disks
** Unable to read file ubootefi.var **
Failed to load EFI variables
dw_dm_mdio_init: mdio node is missing, registering legacy mdio busdw_dm_mdio_init: mdio node is missing, registering legacy mdio busBootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
147456 bytes read in 12 ms (11.7 MiB/s)
Booting /efi\boot\bootaa64.efi
error: no suitable video mode found.
error: no video mode activated.


                                     GNU GRUB  version 2.06

 ┌─────────────────────────────────────────────────────────────────────────────────────────────┐
 │*Armbian GNU/Linux                                                                           │
 │ Advanced options for Armbian GNU/Linux                                                      │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 │                                                                                             │
 └─────────────────────────────────────────────────────────────────────────────────────────────┘

      Use the ▲ and ▼ keys to select which entry is highlighted.
      Press enter to boot the selected OS, `e' to edit the commands before booting or `c'
      for a command-line.
   The highlighted entry will be executed automatically in 0s.


























EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services...