Jump to content

XU4 Serial Console question (No Kernel output)


justsomeguy1983

Recommended Posts

I'm trying to get a full serial console on my XU4.  I currently only get the U-boot output.  The last message says "Loading Kernel".  I never get any kernel related messages. 

I understand I will need to start up a getty to actually log in via this console port, but I haven't even gotten that far. 

 

In my (unchanged) boot.ini I have console=ttySAC2, 115200n8.  And when the system boots up, I cannot manually write anything to that port (as i believe the kernel has it opened)

 

Any Ideas?

Thanks!

 

Caleb

Link to comment
Share on other sites

That is a strange port ! It is usually ttyS0 ...

I believe it's the correct one for this board

 

In my (unchanged) boot.ini I have console=ttySAC2, 115200n8.  And when the system boots up, I cannot manually write anything to that port (as i believe the kernel has it opened)

So system fully boots up and you can access it i.e. via SSH or display? Maybe dmesg log can be useful.

Link to comment
Share on other sites

Yes, I can log in with a display or by ssh.

 

Here is dmesg:

 

 

root@odroidxu4:~# dmesg
[    0.000000] [c0] Booting Linux on physical CPU 0x100
[    0.000000] [c0] Initializing cgroup subsys cpuset
[    0.000000] [c0] Initializing cgroup subsys cpu
[    0.000000] [c0] Initializing cgroup subsys cpuacct
[    0.000000] [c0] Linux version 3.10.104-odroidxu4 (root@devel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #14 SMP PREEMPT Thu Feb 2 02:48:48 CET 2017
[    0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
[    0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
[    0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
[    0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
[    0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
[    0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
[    0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
[    0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
[    0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
[    0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
[    0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
[    0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
[    0.000000] [c0] On node 0 totalpages: 518656
[    0.000000] [c0] free_area_init_node: node 0, pgdat c09f6040, node_mem_map c0e68000
[    0.000000] [c0]   Normal zone: 1520 pages used for memmap
[    0.000000] [c0]   Normal zone: 0 pages reserved
[    0.000000] [c0]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000] [c0]   HighMem zone: 2532 pages used for memmap
[    0.000000] [c0]   HighMem zone: 324096 pages, LIFO batch:31
[    0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1e76000 s14848 r8192 d13824 u36864
[    0.000000] [c0] pcpu-alloc: s14848 r8192 d13824 u36864 alloc=9*4096
[    0.000000] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517136
[    0.000000] [c0] Kernel command line: console=tty1 loglevel=1 root=/dev/mmcblk0p1 rootwait ro fsck.repair=yes smsc95xx.macaddr=00:1e:06:61:7a:55 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi
[    0.000000] [c0] hdmi: using HDMI Mode
[    0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] [c0] allocated 4149248 bytes of page_cgroup
[    0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] [c0] Memory: 2026MB = 2026MB total
[    0.000000] [c0] Memory: 1519480k/1519480k available, 555144k reserved, 1046528K highmem
[    0.000000] [c0] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
                   vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0916fe4   (9276 kB)
                     .init : 0xc0917000 - 0xc0982a00   ( 431 kB)
                     .data : 0xc0984000 - 0xc09fdd30   ( 488 kB)
                      .bss : 0xc09fdd30 - 0xc0e67e20   (4521 kB)
[    0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] [c0] Preemptible hierarchical RCU implementation.
[    0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
[    0.000000] [c0] apll 800000000
[    0.000000] [c0] bpll 825000000
[    0.000000] [c0] cpll 666000000
[    0.000000] [c0] dpll 600000000
[    0.000000] [c0] epll 180633609
[    0.000000] [c0] rpll 66000000
[    0.000000] [c0] ipll 432000000
[    0.000000] [c0] spll 800000000
[    0.000000] [c0] dout_spll_ctrl_div2 400000000
[    0.000000] [c0] vpll 400000000
[    0.000000] [c0] mpll 532000000
[    0.000000] [c0] Clock enables : TOP, MIF
[    0.000000] [c0] mmc0: dout_mmc0 666000000
[    0.000000] [c0] mmc1: dout_mmc1 800000000
[    0.000000] [c0] mmc2: dout_mmc2 666000000
[    0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
[    0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000
[    0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
[    0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
[    0.000000] [c0] mfc: aclk_333 400000000
[    0.000000] [c0] Exynos5422: clock setup completed
[    0.000000] [c0] Exynos: pwm: clock setup completed
[    0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] [c0] Switching to timer-based delay loop
[    0.000000] [c0] EXYNOS5422 PMU Initialize
[    0.000000] [c0] Console: colour dummy device 80x30
[    0.000000] [c0] console [tty1] enabled
[    0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] [c0] ... MAX_LOCK_DEPTH:          48
[    0.000000] [c0] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] [c0] ... CLASSHASH_SIZE:          4096
[    0.000000] [c0] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] [c0] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] [c0] ... CHAINHASH_SIZE:          16384
[    0.000000] [c0]  memory used by lock dependency info: 3679 kB
[    0.000000] [c0]  per task-struct memory footprint: 1152 bytes
[    0.001250] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.001277] [c0] pid_max: default: 32768 minimum: 301
[    0.001733] [c0] Mount-cache hash table entries: 512
[    0.036921] [c0] Initializing cgroup subsys memory
[    0.037013] [c0] Initializing cgroup subsys devices
[    0.037044] [c0] Initializing cgroup subsys freezer
[    0.037073] [c0] Initializing cgroup subsys blkio
[    0.037093] [c0] Initializing cgroup subsys perf_event
[    0.037312] [c0] CPU: Testing write buffer coherency: ok
[    0.037374] [c0] ftrace: allocating 23472 entries in 69 pages
[    0.087042] [c0] /cpus/cpu@0 missing clock-frequency property
[    0.087075] [c0] /cpus/cpu@1 missing clock-frequency property
[    0.087096] [c0] /cpus/cpu@2 missing clock-frequency property
[    0.087117] [c0] /cpus/cpu@3 missing clock-frequency property
[    0.087136] [c0] /cpus/cpu@4 missing clock-frequency property
[    0.087155] [c0] /cpus/cpu@5 missing clock-frequency property
[    0.087175] [c0] /cpus/cpu@6 missing clock-frequency property
[    0.087194] [c0] /cpus/cpu@7 missing clock-frequency property
[    0.087266] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.087445] [c0] Running under secure firmware.
[    0.087493] [c0] Setting up static identity map for 0xc0680770 - 0xc06807c8
[    0.087520] [c0] Exynos-SnapShot: exynos_ss_init failed
[    0.107928] [c0] ftrace: Allocated trace_printk buffers
[    0.129594] [c0] cpu1: SWRESET
[    0.129848] [c1] CPU1: Booted secondary processor
[    0.129878] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.139541] [c0] cpu2: SWRESET
[    0.139800] [c2] CPU2: Booted secondary processor
[    0.139829] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.149512] [c0] cpu3: SWRESET
[    0.149771] [c3] CPU3: Booted secondary processor
[    0.149797] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.158797] [c4] CPU4: Booted secondary processor
[    0.159553] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.168778] [c5] CPU5: Booted secondary processor
[    0.169552] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.178789] [c6] CPU6: Booted secondary processor
[    0.179563] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.188804] [c7] CPU7: Booted secondary processor
[    0.189560] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.189815] [c0] Brought up 8 CPUs
[    0.189880] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.189895] [c0] CPU: All CPU(s) started in HYP mode.
[    0.189909] [c0] CPU: Virtualization extensions available.
[    0.192303] [c0] devtmpfs: initialized
[    0.230059] [c6] sched: registering cpufreq notifiers for scale-invariant loads
[    0.232790] [c6] pinctrl core: initialized pinctrl subsystem
[    0.233824] [c6] regulator-dummy: no parameters
[    0.243362] [c6] NET: Registered protocol family 16
[    0.243833] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.250561] [c4] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
[    0.250736] [c4] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
[    0.250901] [c4] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
[    0.251063] [c4] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
[    0.251230] [c4] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
[    0.253188] [c4] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
[    0.253362] [c4] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
[    0.253528] [c4] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
[    0.253693] [c4] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
[    0.253864] [c4] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
[    0.254029] [c4] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
[    0.254194] [c4] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
[    0.254367] [c4] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
[    0.254533] [c4] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
[    0.254740] [c4] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
[    0.254909] [c4] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
[    0.255076] [c4] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
[    0.255246] [c4] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
[    0.256873] [c4] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
[    0.257046] [c4] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
[    0.257212] [c4] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
[    0.257377] [c4] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
[    0.257546] [c4] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
[    0.257717] [c4] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
[    0.257882] [c4] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
[    0.258050] [c4] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
[    0.259439] [c4] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
[    0.259613] [c4] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
[    0.259813] [c4] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
[    0.259987] [c4] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
[    0.260156] [c4] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
[    0.260366] [c4] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
[    0.260544] [c4] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
[    0.260715] [c4] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
[    0.260905] [c4] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
[    0.262816] [c4] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
[    0.282000] [c4] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
[    0.282464] [c4] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
[    0.289752] [c4] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.289771] [c4] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.291871] [c4] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.295970] [c4] PM DOMAIN: pd-cam has a new child pd-isp.
[    0.296788] [c4] PM DOMAIN: pd-gscl has a new child pd-cam.
[    0.296817] [c4] EXYNOS5: PM Domain Initialize
[    0.297101] [c4]    pd-gscl   - on
[    0.297267] [c4]    pd-isp    - on
[    0.297433] [c4]    pd-mfc    - on
[    0.297453] [c4]    pd-g3d    - on,  always
[    0.297472] [c4]    pd-disp1  - on,  always
[    0.297642] [c4]    pd-maudio - on
[    0.297660] [c4]    pd-g2d    - on,  always
[    0.297830] [c4]    pd-mscl   - on
[    0.297850] [c4]    pd-fsys   - on,  always
[    0.297869] [c4]    pd-psgen  - on,  always
[    0.297888] [c4]    pd-peric  - on,  always
[    0.297906] [c4]    pd-wcore  - on,  always
[    0.298076] [c4]    pd-cam    - on
[    0.298104] [c4] EXYNOS: Initializing architecture
[    0.299579] [c4] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
[    0.299601] [c4] exynos-sysmmu 10a60000.sysmmu: [OK]
[    0.299953] [c4] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
[    0.299975] [c4] exynos-sysmmu 10a70000.sysmmu: [OK]
[    0.300304] [c4] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
[    0.300325] [c4] exynos-sysmmu 14650000.sysmmu: [OK]
[    0.300627] [c4] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
[    0.300647] [c4] exynos-sysmmu 13e80000.sysmmu: [OK]
[    0.300949] [c4] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
[    0.300969] [c4] exynos-sysmmu 13e90000.sysmmu: [OK]
[    0.301281] [c4] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
[    0.301302] [c4] exynos-sysmmu 12880000.sysmmu: [OK]
[    0.301622] [c4] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
[    0.301643] [c4] exynos-sysmmu 12890000.sysmmu: [OK]
[    0.301958] [c4] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
[    0.301978] [c4] exynos-sysmmu 128a0000.sysmmu: [OK]
[    0.302290] [c4] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
[    0.302310] [c4] exynos-sysmmu 128c0000.sysmmu: [OK]
[    0.302621] [c4] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
[    0.302642] [c4] exynos-sysmmu 128d0000.sysmmu: [OK]
[    0.302953] [c4] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
[    0.302974] [c4] exynos-sysmmu 128e0000.sysmmu: [OK]
[    0.303283] [c4] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
[    0.303303] [c4] exynos-sysmmu 11f10000.sysmmu: [OK]
[    0.303610] [c4] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
[    0.303630] [c4] exynos-sysmmu 11f20000.sysmmu: [OK]
[    0.303921] [c4] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
[    0.303941] [c4] exynos-sysmmu 11200000.sysmmu: [OK]
[    0.304234] [c4] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
[    0.304255] [c4] exynos-sysmmu 11210000.sysmmu: [OK]
[    0.304588] [c4] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
[    0.304608] [c4] exynos-sysmmu 14640000.sysmmu: [OK]
[    0.304970] [c4] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
[    0.304990] [c4] exynos-sysmmu 14680000.sysmmu: [OK]
[    0.305413] [c4] CPU Info : Samsung Exynos5422 Soc is BIN1
[    0.305428] [c4] Exynos5422 ASV : Use Fusing Speed Group 3
[    0.305441] [c4] Exynos5422 ASV : invalid IDS value
[    0.305455] [c4] EXYNOS5422 ASV :  IDS : 0 HPM : 0
[    0.305501] [c4] VDD_ARM ASV group is 3
[    0.305519] [c4] VDD_KFC ASV group is 3
[    0.305536] [c4] VDD_INT ASV group is 3
[    0.305553] [c4] VDD_MIF ASV group is 3
[    0.305569] [c4] VDD_G3D ASV group is 3
[    0.305585] [c4] VDD_ISP ASV group is 3
[    0.319347] [c4] bio: create slab <bio-0> at 0
[    0.321082] [c4] of_get_named_gpio_flags exited with status 119
[    0.321325] [c4] VUSB_BOOST_5V: 5000 mV
[    0.321670] [c4] of_get_named_gpio_flags: can't parse gpios property
[    0.321886] [c4] MAIN_DC: no parameters
[    0.322126] [c4] of_get_named_gpio_flags: can't parse gpios property
[    0.322336] [c4] hdmi-en: no parameters
[    0.323485] [c4] SCSI subsystem initialized
[    0.323885] [c4] usbcore: registered new interface driver usbfs
[    0.324004] [c4] usbcore: registered new interface driver hub
[    0.324216] [c4] usbcore: registered new device driver usb
[    0.330179] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV
[    0.331432] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
[    0.332677] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV
[    0.333919] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV
[    0.335269] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV
[    0.337063] [c4] vddf_2v85: 3300 mV
[    0.338459] [c4] vdd_adc: 1800 mV
[    0.339854] [c4] vdd_pll: 1800 mV
[    0.341256] [c4] vdd_ldo6: 1000 mV
[    0.342646] [c4] vdd_ldo7: 1800 mV
[    0.344047] [c4] vdd_ldo8: 1800 mV
[    0.345496] [c4] vdd_ldo9: 3300 mV
[    0.346894] [c4] vdd_ldo10: 1800 mV
[    0.348284] [c4] vdd_ldo11: 1000 mV
[    0.349370] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
[    0.350823] [c4] vdd_ldo15: 3300 mV
[    0.352225] [c4] vdd_eth: 3300 mV
[    0.353742] [c4] vdd_ldo18: 1850 mV
[    0.354834] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV
[    0.355983] [c4] vdd_mifs: 800 <--> 1100 mV at 1100 mV
[    0.357373] [c4] vdd_ldo26: 3000 mV
[    0.358461] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV
[    0.359860] [c4] vdd_ldo28: 3300 mV
[    0.361384] [c4] vdd_ldo30: 3300 mV
[    0.364184] [c4] of_get_named_gpio_flags exited with status 177
[    0.364214] [c4] of_get_named_gpio_flags exited with status 178
[    0.365118] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
[    0.365725] [c4] s3c-i2c 12c60000.i2c: slave address 0x00
[    0.368341] [c5] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
[    0.368599] [c5] s3c-i2c 12c70000.i2c: slave address 0x00
[    0.368864] [c5] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
[    0.369314] [c5] media: Linux media interface: v0.10
[    0.369406] [c5] Linux video capture interface: v2.00
[    0.371407] [c5] IOVMMU: Created debugfs entry at debugfs/iovmm
[    0.371985] [c5] Advanced Linux Sound Architecture Driver Initialized.
[    0.372603] [c5] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
[    0.372641] [c5] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
[    0.374608] [c5] Loading modules backported from Linux version next-20150222-0-g53e418f1
[    0.374663] [c5] Backport integrated by backports.git backports-20150222-0-g2745ccd
[    0.376351] [c5] Switching to clocksource mct-frc
[    0.461141] [c5] NET: Registered protocol family 2
[    0.462931] [c5] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.463404] [c5] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.465389] [c5] TCP: Hash tables configured (established 8192 bind 8192)
[    0.465501] [c5] TCP: reno registered
[    0.465532] [c5] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.465813] [c5] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.466918] [c5] NET: Registered protocol family 1
[    0.467411] [c5] Unpacking initramfs...
[    0.905364] [c5] Freeing initrd memory: 6200K (c2001000 - c260f000)
[    0.918870] [c5] bounce pool size: 64 pages
[    0.927272] [c5] VFS: Disk quotas dquot_6.5.2
[    0.927635] [c5] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.930787] [c5] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.931790] [c5] msgmni has been set to 1447
[    0.936067] [c5] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.936592] [c6] io scheduler noop registered
[    0.936613] [c6] io scheduler deadline registered
[    0.936852] [c6] io scheduler cfq registered (default)
[    0.947280] [c6] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    0.947303] [c6] dma-pl330 10800000.mdma:    DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    0.953029] [c6] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.953051] [c6] dma-pl330 121a0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.958791] [c6] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.958813] [c6] dma-pl330 121b0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.961890] [c6] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    0.961911] [c6] dma-pl330 3880000.adma:     DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    1.101352] [c6] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.104142] [c6] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
[    1.104875] [c6] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
[    1.105599] [c6] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
[    1.106295] [c6] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
[    1.109473] [c6] [drm] Initialized drm 1.1.0 20060810
[    1.112753] [c6] of_get_named_gpio_flags exited with status 39
[    1.116838] [c6] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.116857] [c6] [drm] No driver support for vblank timestamp query.
[    1.116881] [c6] exynos-mixer 14450000.mixer: probe start
[    1.117154] [c6] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[    1.117472] [c6] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[    1.117519] [c6] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[    1.118103] [c6] mali 11800000.mali: Continuing without Mali clock control
[    1.121620] [c6] hrtimer: interrupt took 128167 ns
[    1.122178] [c6] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    1.127888] mali 11800000.mali: Probed as mali0
[    1.136093] [c6] loop: module loaded
[    1.137288] [c6] tun: Universal TUN/TAP device driver, 1.6
[    1.137305] [c6] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.141543] [c6] of_get_named_gpio_flags exited with status 48
[    1.141570] [c6] of_get_named_gpio_flags exited with status 37
[    1.344132] [c6] of_get_named_gpio_flags exited with status 17
[    1.344159] [c6] of_get_named_gpio_flags exited with status 36
[    1.545743] [c6] dwc3 12400000.dwc3: dwc3_otg address space is not supported
[    1.546797] [c6] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
[    1.547567] [c6] dwc3 12400000.dwc3: Turn on host
[    1.748644] [c6] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.748661] [c6] ehci-s5p: EHCI s5p driver
[    1.748982] [c6] of_get_named_gpio_flags exited with status 121
[    1.749256] [c6] s5p-ehci 12110000.usb: EHCI Host Controller
[    1.749404] [c6] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    1.749624] [c6] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
[    1.756585] [c6] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    1.758031] [c6] hub 1-0:1.0: USB hub found
[    1.758074] [c6] hub 1-0:1.0: 3 ports detected
[    1.759422] [c6] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.759821] [c6] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
[    1.759873] [c6] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    1.759952] [c6] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
[    1.816796] [c6] hub 2-0:1.0: USB hub found
[    1.816838] [c6] hub 2-0:1.0: 3 ports detected
[    1.818361] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.818413] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    1.818679] [c6] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
[    1.819556] [c6] xHCI xhci_add_endpoint called for root hub
[    1.819574] [c6] xHCI xhci_check_bandwidth called for root hub
[    1.819841] [c6] hub 3-0:1.0: USB hub found
[    1.819923] [c6] hub 3-0:1.0: 1 port detected
[    1.820488] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.820532] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    1.821442] [c6] xHCI xhci_add_endpoint called for root hub
[    1.821458] [c6] xHCI xhci_check_bandwidth called for root hub
[    1.821792] [c6] hub 4-0:1.0: USB hub found
[    1.821834] [c6] hub 4-0:1.0: 1 port detected
[    1.822507] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.822558] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    1.822818] [c6] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
[    1.823693] [c6] xHCI xhci_add_endpoint called for root hub
[    1.823710] [c6] xHCI xhci_check_bandwidth called for root hub
[    1.823981] [c6] hub 5-0:1.0: USB hub found
[    1.824023] [c6] hub 5-0:1.0: 1 port detected
[    1.824581] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.824683] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    1.825614] [c6] xHCI xhci_add_endpoint called for root hub
[    1.825630] [c6] xHCI xhci_check_bandwidth called for root hub
[    1.825920] [c6] hub 6-0:1.0: USB hub found
[    1.825962] [c6] hub 6-0:1.0: 1 port detected
[    1.826859] [c6] usbcore: registered new interface driver usb-storage
[    1.827069] [c6] usbcore: registered new interface driver usbserial
[    1.827169] [c6] usbcore: registered new interface driver usbserial_generic
[    1.827266] [c6] usbserial: USB Serial support registered for generic
[    1.828031] [c6] of_get_named_gpio_flags: can't parse gpios property
[    1.828052] [c6] exynos-usb-switch usb-switch.10: host detect gpio is not available
[    1.828069] [c6] of_get_named_gpio_flags: can't parse gpios property
[    1.828087] [c6] exynos-usb-switch usb-switch.10: device detect gpio is not available
[    1.828103] [c6] of_get_named_gpio_flags: can't parse gpios property
[    1.828119] [c6] exynos-usb-switch usb-switch.10: vbus control gpio is not available
[    1.828160] [c6] exynos-usb-switch usb-switch.10: failed to configure pins
[    1.828370] [c6] exynos-usb-switch usb-switch.10: udc device is not available
[    1.828386] [c6] exynos-usb-switch usb-switch.10: Disable device detect IRQ
[    1.828410] [c6] usb cable = 1
[    1.829391] [c6] mousedev: PS/2 mouse device common for all mice
[    1.831060] [c6] s2m-rtc s2m-rtc: rtc init
[    1.834866] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
[    1.835181] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
[    1.835651] [c6] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
[    1.840040] [c6] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
[    1.840910] [c6] i2c /dev entries driver
[    1.842987] [c6] IR NEC protocol handler initialized
[    1.843006] [c6] IR RC5(x) protocol handler initialized
[    1.843022] [c6] IR RC6 protocol handler initialized
[    1.843039] [c6] IR JVC protocol handler initialized
[    1.843055] [c6] IR Sony protocol handler initialized
[    1.843071] [c6] IR RC5 (streamzap) protocol handler initialized
[    1.843087] [c6] IR SANYO protocol handler initialized
[    1.843103] [c6] IR MCE Keyboard/mouse protocol handler initialized
[    1.843621] [c6] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
[    1.843658] [c6] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
[    1.843697] [c6] s5p-mfc 11000000.mfc: s5p_mfc_probe()
[    1.843724] [c6] s5p-mfc 11000000.mfc: of alias get id : mfc-0
[    1.844452] [c6] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
[    1.844776] [c6] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
[    1.845143] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
[    1.845179] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
[    1.845207] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
[    1.845241] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
[    1.845275] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
[    1.845301] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
[    1.846255] [c6] ion_cma ion_mfc_nfw: Alread isolated!
[    1.846271] [c6] s5p_mfc_probe--
[    1.846665] [c6] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
[    1.848485] [c6] TRIMINFO[0] = 0x80652c
[    1.848503] [c6] TMU_CONTROL[0] = 0x10609803
[    1.848518] [c6] CURRENT_TEMP[0] = 0x0
[    1.848533] [c6] THRESHOLD_TEMP_RISE[0] = 0x817c7772
[    1.848548] [c6] THRESHOLD_TEMP_FALL[0] = 0x7f7a7570
[    1.848562] [c6] INTEN[0] = 0x11111111
[    1.848576] [c6] INTCLEAR[0] = 0x0
[    1.848622] [c6] TRIMINFO[1] = 0x80662c
[    1.848636] [c6] TMU_CONTROL[1] = 0x10609803
[    1.848650] [c6] CURRENT_TEMP[1] = 0x0
[    1.848664] [c6] THRESHOLD_TEMP_RISE[1] = 0x817c7772
[    1.848678] [c6] THRESHOLD_TEMP_FALL[1] = 0x7f7a7570
[    1.848692] [c6] INTEN[1] = 0x11111111
[    1.848706] [c6] INTCLEAR[1] = 0x0
[    1.848752] [c6] TRIMINFO[2] = 0x806e36
[    1.848766] [c6] TMU_CONTROL[2] = 0x10609803
[    1.848779] [c6] CURRENT_TEMP[2] = 0x0
[    1.848793] [c6] THRESHOLD_TEMP_RISE[2] = 0x847f7a75
[    1.848807] [c6] THRESHOLD_TEMP_FALL[2] = 0x827d7873
[    1.848820] [c6] INTEN[2] = 0x11111111
[    1.848834] [c6] INTCLEAR[2] = 0x0
[    1.848879] [c6] TRIMINFO[3] = 0x80682f
[    1.848894] [c6] TMU_CONTROL[3] = 0x10609803
[    1.848908] [c6] CURRENT_TEMP[3] = 0x0
[    1.848922] [c6] THRESHOLD_TEMP_RISE[3] = 0x7f7a7570
[    1.848936] [c6] THRESHOLD_TEMP_FALL[3] = 0x7d78736e
[    1.848949] [c6] INTEN[3] = 0x11111111
[    1.848963] [c6] INTCLEAR[3] = 0x0
[    1.849008] [c6] TRIMINFO[4] = 0x80652a
[    1.849023] [c6] TMU_CONTROL[4] = 0x10609803
[    1.849036] [c6] CURRENT_TEMP[4] = 0x0
[    1.849050] [c6] THRESHOLD_TEMP_RISE[4] = 0x8b86817c
[    1.849064] [c6] THRESHOLD_TEMP_FALL[4] = 0x89847f7a
[    1.849078] [c6] INTEN[4] = 0x11111111
[    1.849092] [c6] INTCLEAR[4] = 0x0
[    1.850331] [c6] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.851229] [c6] cpuidle: using governor ladder
[    1.852943] [c6] cpuidle: using governor menu
[    1.853021] [c6] Synopsys Designware Multimedia Card Interface Driver
[    1.854084] [c6] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
[    1.854196] of_get_named_gpio_flags exited with status 69
[    1.854239] [c6] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
[    1.854347] [c6] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
[    1.854368] [c6] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
[    1.854385] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
[    1.854803] [c6] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
[    1.871597] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    1.886810] [c6] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
[    1.887416] [c6] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
[    1.887504] of_get_named_gpio_flags: can't parse gpios property
[    1.887609] [c6] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
[    1.887630] [c6] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
[    1.887646] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
[    1.888065] [c6] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
[    1.888429] [c6] mmc1: vmmc regulator found
[    1.888578] [c6] mmc1: vqmmc regulator found
[    1.906596] [c6] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    1.921846] [c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
[    1.923011] [c7] leds-gpio leds.15: pins are not configured from the driver
[    1.923056] [c7] of_get_named_gpio_flags exited with status 205
[    1.923083] [c7] of_get_named_gpio_flags exited with status 204
[    1.923108] [c7] of_get_named_gpio_flags exited with status 27
[    1.923146] [c7] of_get_named_gpio_flags exited with status 205
[    1.923464] [c7] of_get_named_gpio_flags exited with status 204
[    1.923708] [c7] of_get_named_gpio_flags exited with status 27
[    1.924330] [c7] ledtrig-cpu: registered to indicate activity on CPUs
[    1.924402] [c7] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
[    1.925178] [c5] ACE: ecb-aes-s5p-ace
[    1.925503] [c6] ACE: cbc-aes-s5p-ace
[    1.925811] [c6] ACE: ctr-aes-s5p-ace
[    1.926125] [c6] ACE: xts-aes-s5p-ace
[    1.926429] [c6] ACE: sha1-s5p-ace
[    1.926787] [c6] ACE: sha256-s5p-ace
[    1.926802] [c6] ACE driver is initialized
[    1.927109] [c6] hidraw: raw HID events driver (C) Jiri Kosina
[    1.927521] [c6] usbcore: registered new interface driver usbhid
[    1.927536] [c6] usbhid: USB HID core driver
[    1.928440] [c6] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
[    1.929009] [c6] exynos-adc 12d10000.adc: Probed successfully driver.
[    1.929896] [c6] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
[    1.930050] [c6] pwm-samsung: tin parent at 66600000
[    1.932190] [c6] of_get_named_gpio_flags exited with status 34
[    1.934072] [c6] lpass_register_subip: i2s(de384810) registered
[    2.126438] [c7] mmc0: BKOPS_EN bit is not set
[    2.126639] [c5] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    2.143954] [c7] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
[    2.144016] [c7] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
[    2.144128] [c7] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
[    2.144179] [c7] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
[    2.144983] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
[    2.145166] [c7] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
[    2.145299] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
[    2.145430] [c7] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
[    2.146030] [c7] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x cf best_sample: 0x 00
[    2.146903] [c7] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 200000000Hz, actual 41625000HZ div = 0)
[    2.146965] [c7] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 41625000Hz, actual 41625000HZ div = 0)
[    2.148139] [c7] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 41625000Hz, actual 41625000HZ div = 4)
[    2.148199] [c7] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
[    2.149123] [c7] mmc0: new HS200-DDR MMC card at address 0001
[    2.150350] [c7] mmcblk0: mmc0:0001 SDW16G 14.6 GiB
[    2.150898] [c7] mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
[    2.151446] [c7] mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
[    2.153612] [c7]  mmcblk0: p1
[    2.156350] [c7]  mmcblk0boot1: unknown partition table
[    2.158528] [c7]  mmcblk0boot0: unknown partition table
[    2.173417] [c5] hub 3-1:1.0: USB hub found
[    2.173891] [c5] hub 3-1:1.0: 2 ports detected
[    2.371913] [c5] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.388051] [c5] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    2.397592] [c5] hub 4-1:1.0: USB hub found
[    2.398036] [c5] hub 4-1:1.0: 2 ports detected
[    2.506873] [c5] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.522123] [c5] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    2.931569] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
               : CTL          0x00000089
               : FIFO_CTL     0x00200203
               : TRAILING_CTL 0x0000000f
               : CLK_CTL      0x00000000
               : CLK_SLOT     0x00000000
               : INT_EN       0x00000000
               : INT_STAT     0x00000000
               : ERR_STAT     0x00000000
               : FIFO_STAT    0x01000002
               : TXDATA       0xdeadbeaf
               : RXDATA       0x00000000
               : CONF         0xb00300ff
               : AUTO_CONF    0x00020002
               : TIMEOUT      0x000000ff
               : MANUAL_CMD   0x00000000
               : TRANS_STAT   0x00000000
               : TIMING_HS1   0x4b4b4b00
               : TIMING_HS2   0x25004b4b
               : TIMING_HS3   0x00000096
               : TIMING_FS1   0x4b4b4b00
               : TIMING_FS2   0x25004b4b
               : TIMING_FS3   0x00000096
               : TIMING_SLA   0x00000025
               : ADDR         0x00004000
[    2.931649] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    3.931566] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
               : CTL          0x00000089
               : FIFO_CTL     0x00200203
               : TRAILING_CTL 0x0000000f
               : CLK_CTL      0x00000000
               : CLK_SLOT     0x00000000
               : INT_EN       0x00000000
               : INT_STAT     0x00000000
               : ERR_STAT     0x00000000
               : FIFO_STAT    0x01000002
               : TXDATA       0xdeadbeaf
               : RXDATA       0x00000000
               : CONF         0xb00300ff
               : AUTO_CONF    0x00020002
               : TIMEOUT      0x000000ff
               : MANUAL_CMD   0x00000000
               : TRANS_STAT   0x00000000
               : TIMING_HS1   0x4b4b4b00
               : TIMING_HS2   0x25004b4b
               : TIMING_HS3   0x00000096
               : TIMING_FS1   0x4b4b4b00
               : TIMING_FS2   0x25004b4b
               : TIMING_FS3   0x00000096
               : TIMING_SLA   0x00000025
               : ADDR         0x00004000
[    3.931641] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    3.931759] [c6] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
[    3.931798] [c6] max98090 1-0010: Failed to reset codec: -5
[    3.931815] [c6] max98090 1-0010: Failed to device reset : -5
[    3.931831] [c6] max98090 1-0010: ASoC: failed to probe CODEC -5
[    3.932063] [c6] odroid-audio sound.13: ASoC: failed to instantiate card -5
[    3.932398] [c6] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
[    3.933284] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    3.933320] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    3.933355] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    3.933388] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    3.933422] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    3.933455] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    3.934395] [c6] odroid-audio sound.13:  dummy-aif1 <-> samsung-i2s-sec mapping ok
[    3.935391] [c7] odroid-audio sound.13:  dummy-aif2 <-> 3830000.i2s mapping ok
[    3.938490] [c7] Netfilter messages via NETLINK v0.30.
[    3.939226] [c7] arp_tables: (C) 2002 David S. Miller
[    3.939426] [c7] TCP: cubic registered
[    3.939450] [c7] Initializing XFRM netlink socket
[    3.940252] [c7] NET: Registered protocol family 10
[    3.942016] [c7] mip6: Mobile IPv6
[    3.942038] [c7] sit: IPv6 over IPv4 tunneling driver
[    3.943840] [c7] NET: Registered protocol family 17
[    3.943913] [c7] NET: Registered protocol family 15
[    3.943982] [c7] NET: Registered protocol family 35
[    3.944429] [c7] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    3.944515] [c7] Registering SWP/SWPB emulation handler
[    3.944537] [c7] SRAM ASV group [3] : MIF(950000), G3D(975000)
[    3.950830] [c7] registered taskstats version 1
[    3.951020] [c7] hdmi-en: disabling
[    3.951038] [c7] MAIN_DC: disabling
[    3.951058] [c7] regulator-dummy: disabling
[    3.952074] [c7] of_get_named_gpio_flags exited with status 11
[    3.952203] [c7] gpiod_set_debounce: gpio-11 status -22
[    3.952727] [c7] input: gpio_keys.7 as /devices/gpio_keys.7/input/input0
[    3.953449] [c7] CPUFREQ of CA7  L0 : 1300000 uV
[    3.953466] [c7] CPUFREQ of CA7  L0 : ABB 8
[    3.953480] [c7] CPUFREQ of CA7  L1 : 1287500 uV
[    3.953494] [c7] CPUFREQ of CA7  L1 : ABB 4
[    3.953508] [c7] CPUFREQ of CA7  L2 : 1237500 uV
[    3.953522] [c7] CPUFREQ of CA7  L2 : ABB 4
[    3.953535] [c7] CPUFREQ of CA7  L3 : 1187500 uV
[    3.953548] [c7] CPUFREQ of CA7  L3 : ABB 4
[    3.953562] [c7] CPUFREQ of CA7  L4 : 1137500 uV
[    3.953575] [c7] CPUFREQ of CA7  L4 : ABB 4
[    3.953587] [c7] CPUFREQ of CA7  L5 : 1100000 uV
[    3.953600] [c7] CPUFREQ of CA7  L5 : ABB 4
[    3.953613] [c7] CPUFREQ of CA7  L6 : 1062500 uV
[    3.953626] [c7] CPUFREQ of CA7  L6 : ABB 4
[    3.953639] [c7] CPUFREQ of CA7  L7 : 1025000 uV
[    3.953652] [c7] CPUFREQ of CA7  L7 : ABB 4
[    3.953665] [c7] CPUFREQ of CA7  L8 : 987500 uV
[    3.953678] [c7] CPUFREQ of CA7  L8 : ABB 255
[    3.953692] [c7] CPUFREQ of CA7  L9 : 950000 uV
[    3.953705] [c7] CPUFREQ of CA7  L9 : ABB 255
[    3.953718] [c7] CPUFREQ of CA7  L10 : 912500 uV
[    3.953732] [c7] CPUFREQ of CA7  L10 : ABB 255
[    3.953745] [c7] CPUFREQ of CA7  L11 : 900000 uV
[    3.953758] [c7] CPUFREQ of CA7  L11 : ABB 255
[    3.953772] [c7] CPUFREQ of CA7  L12 : 900000 uV
[    3.953785] [c7] CPUFREQ of CA7  L12 : ABB 255
[    3.953798] [c7] CPUFREQ of CA7  L13 : 900000 uV
[    3.953811] [c7] CPUFREQ of CA7  L13 : ABB 255
[    3.953824] [c7] CPUFREQ of CA7  L14 : 900000 uV
[    3.953837] [c7] CPUFREQ of CA7  L14 : ABB 255
[    3.954154] [c7] kfc clock[800000], mx_mspll clock[666000]
[    3.954179] [c7] [SET_EMA_TEST] volt : 887500  value : 0x44
[    3.954194] [c7] [SET_EMA_TEST] volt : 937500  value : 0x44
[    3.954208] [c7] [SET_EMA_TEST] volt : 1032500  value : 0x33
[    3.954222] [c7] [SET_EMA_TEST] volt : 1142500  value : 0x11
[    3.954236] [c7] [SET_EMA_TEST] volt : 1167500  value : 0x11
[    3.954251] [c7] CPUFREQ of CA15 L0 : 1362500 uV
[    3.954265] [c7] CPUFREQ of CA15  L0 : ABB 8
[    3.954279] [c7] CPUFREQ of CA15 L1 : 1362500 uV
[    3.954292] [c7] CPUFREQ of CA15  L1 : ABB 8
[    3.954305] [c7] CPUFREQ of CA15 L2 : 1362500 uV
[    3.954319] [c7] CPUFREQ of CA15  L2 : ABB 8
[    3.954332] [c7] CPUFREQ of CA15 L3 : 1337500 uV
[    3.954344] [c7] CPUFREQ of CA15  L3 : ABB 255
[    3.954357] [c7] CPUFREQ of CA15 L4 : 1287500 uV
[    3.954370] [c7] CPUFREQ of CA15  L4 : ABB 255
[    3.954384] [c7] CPUFREQ of CA15 L5 : 1212500 uV
[    3.954397] [c7] CPUFREQ of CA15  L5 : ABB 255
[    3.954410] [c7] CPUFREQ of CA15 L6 : 1162500 uV
[    3.954423] [c7] CPUFREQ of CA15  L6 : ABB 255
[    3.954436] [c7] CPUFREQ of CA15 L7 : 1125000 uV
[    3.954449] [c7] CPUFREQ of CA15  L7 : ABB 255
[    3.954462] [c7] CPUFREQ of CA15 L8 : 1087500 uV
[    3.954475] [c7] CPUFREQ of CA15  L8 : ABB 255
[    3.954487] [c7] CPUFREQ of CA15 L9 : 1050000 uV
[    3.954500] [c7] CPUFREQ of CA15  L9 : ABB 255
[    3.954513] [c7] CPUFREQ of CA15 L10 : 1025000 uV
[    3.954527] [c7] CPUFREQ of CA15  L10 : ABB 255
[    3.954540] [c7] CPUFREQ of CA15 L11 : 1012500 uV
[    3.954553] [c7] CPUFREQ of CA15  L11 : ABB 255
[    3.954567] [c7] CPUFREQ of CA15 L12 : 987500 uV
[    3.954580] [c7] CPUFREQ of CA15  L12 : ABB 255
[    3.954593] [c7] CPUFREQ of CA15 L13 : 962500 uV
[    3.954606] [c7] CPUFREQ of CA15  L13 : ABB 255
[    3.954619] [c7] CPUFREQ of CA15 L14 : 937500 uV
[    3.954632] [c7] CPUFREQ of CA15  L14 : ABB 255
[    3.954644] [c7] CPUFREQ of CA15 L15 : 912500 uV
[    3.954658] [c7] CPUFREQ of CA15  L15 : ABB 255
[    3.954670] [c7] CPUFREQ of CA15 L16 : 900000 uV
[    3.954683] [c7] CPUFREQ of CA15  L16 : ABB 255
[    3.954697] [c7] CPUFREQ of CA15 L17 : 900000 uV
[    3.954710] [c7] CPUFREQ of CA15  L17 : ABB 255
[    3.954723] [c7] CPUFREQ of CA15 L18 : 900000 uV
[    3.954736] [c7] CPUFREQ of CA15  L18 : ABB 255
[    3.954749] [c7] CPUFREQ of CA15 L19 : 900000 uV
[    3.954763] [c7] CPUFREQ of CA15  L19 : ABB 255
[    3.954776] [c7] CPUFREQ of CA15 L20 : 900000 uV
[    3.954789] [c7] CPUFREQ of CA15  L20 : ABB 255
[    3.954802] [c7] CPUFREQ of CA15 L21 : 900000 uV
[    3.954815] [c7] CPUFREQ of CA15  L21 : ABB 255
[    3.954828] [c7] CPUFREQ of CA15 L22 : 900000 uV
[    3.954841] [c7] CPUFREQ of CA15  L22 : ABB 255
[    3.955194] [c7] eagle clock[800000], mpll clock[800000]
[    3.959545] [c7] Exynos: Kernel Thermal management registered
[    3.959987] [c7] ### dt-test ### No testcase data in device tree; not running tests
[    3.995529] [c7] MIF 825000Khz ASV is 962500uV
[    3.995592] [c7] DEVFREQ(MIF) : 825000Khz, ABB 14
[    3.995599] [c7] MIF 728000Khz ASV is 925000uV
[    3.995609] [c7] DEVFREQ(MIF) : 728000Khz, ABB 14
[    3.995616] [c7] MIF 633000Khz ASV is 887500uV
[    3.995625] [c7] DEVFREQ(MIF) : 633000Khz, ABB 14
[    3.995632] [c7] MIF 543000Khz ASV is 862500uV
[    3.995641] [c7] DEVFREQ(MIF) : 543000Khz, ABB 14
[    3.995647] [c7] MIF 413000Khz ASV is 800000uV
[    3.995656] [c7] DEVFREQ(MIF) : 413000Khz, ABB 14
[    3.995663] [c7] MIF 275000Khz ASV is 775000uV
[    3.995672] [c7] DEVFREQ(MIF) : 275000Khz, ABB 14
[    3.995678] [c7] MIF 206000Khz ASV is 775000uV
[    3.995687] [c7] DEVFREQ(MIF) : 206000Khz, ABB 14
[    3.995694] [c7] MIF 165000Khz ASV is 775000uV
[    3.995703] [c7] DEVFREQ(MIF) : 165000Khz, ABB 14
[    3.995710] [c7] MIF 138000Khz ASV is 775000uV
[    3.995718] [c7] DEVFREQ(MIF) : 138000Khz, ABB 14
[    3.997023] [c7] MIF: set ASV freq 825000, voltage 962500
[    3.997590] [c7] INT 600000Khz ASV is 950000uV
[    3.997607] [c7] DEVFREQ(INT) : 600000Khz, ABB 255
[    4.996519] [c7] PM DOMAIN: Power off unused power domains.
[    4.996954] [c7] ALSA device list:
[    4.997052] [c7]   #0: odroid-audio
[    4.997510] [c7] Freeing unused kernel memory: 428K (c0917000 - c0982000)
[    5.961720] [c6] raid6: int32x1    507 MB/s
[    6.046519] [c6] raid6: int32x2    668 MB/s
[    6.131541] [c6] raid6: int32x4    778 MB/s
[    6.216568] [c6] raid6: int32x8    917 MB/s
[    6.216576] [c6] raid6: using algorithm int32x8 (917 MB/s)
[    6.216583] [c6] raid6: using intx1 recovery algorithm
[    6.217046] [c6] xor: measuring software checksum speed
[    6.266524] [c6]    arm4regs  :  3225.600 MB/sec
[    6.316517] [c6]    8regs     :  2699.200 MB/sec
[    6.366518] [c6]    32regs    :  2474.400 MB/sec
[    6.366526] [c6] xor: using function: arm4regs (3225.600 MB/sec)
[    6.376163] [c6] bio: create slab <bio-1> at 1
[    6.377384] [c7] Btrfs loaded
[    6.575845] [c4] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    6.739974] [c6] systemd[1]: System time before build time, advancing clock.
[    6.756587] [c6] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.757214] [c6] systemd[1]: Detected architecture arm.
[    6.761420] [c6] systemd[1]: Set hostname to <odroidxu4>.
[    6.948340] [c6] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.948985] [c6] systemd[1]: Listening on Syslog Socket.
[    6.949886] [c6] systemd[1]: Created slice User and Session Slice.
[    6.950444] [c6] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.950981] [c6] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.951309] [c6] systemd[1]: Reached target User and Group Name Lookups.
[    6.951673] [c6] systemd[1]: Reached target Swap.
[    6.952109] [c6] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.952531] [c6] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.953536] [c6] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.954343] [c6] systemd[1]: Created slice System Slice.
[    6.955099] [c6] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.955419] [c6] systemd[1]: Reached target Slices.
[    6.955721] [c6] systemd[1]: Reached target Remote File Systems (Pre).
[    6.956035] [c6] systemd[1]: Reached target Remote File Systems.
[    6.956522] [c6] systemd[1]: Listening on Journal Socket.
[    6.963313] [c6] systemd[1]: Starting Load Kernel Modules...
[    6.966264] [c6] systemd[1]: Starting Nameserver information manager...
[    6.970074] [c6] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.974816] [c6] systemd[1]: Starting Restore / save the current clock...
[    6.978535] [c6] systemd[1]: Mounting POSIX Message Queue File System...
[    6.982225] [c6] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.986369] [c5] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    6.990875] [c5] systemd[1]: Mounting Debug File System...
[    6.994878] [c5] systemd[1]: Starting Set console keymap...
[    6.995515] [c5] systemd[1]: Listening on udev Kernel Socket.
[    6.996326] [c5] systemd[1]: Reached target Encrypted Volumes.
[    6.997316] [c5] systemd[1]: Listening on udev Control Socket.
[    7.008659] [c6] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    7.009876] [c7] systemd[1]: Mounted POSIX Message Queue File System.
[    7.010566] [c7] systemd[1]: Mounted Debug File System.
[    7.014589] [c7] systemd[1]: Started Load Kernel Modules.
[    7.027091] [c4] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.030113] [c4] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.034605] [c4] systemd[1]: Started Restore / save the current clock.
[    7.043344] [c4] systemd[1]: Started Nameserver information manager.
[    7.049729] [c4] systemd[1]: Time has been changed
[    7.091946] [c7] systemd[1]: Started Set console keymap.
[    7.127254] [c7] systemd[1]: Starting udev Coldplug all Devices...
[    7.130730] [c7] systemd[1]: Starting Load/Save Random Seed...
[    7.134546] [c7] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.138437] [c7] systemd[1]: Mounting Configuration File System...
[    7.142483] [c7] systemd[1]: Starting Apply Kernel Variables...
[    7.147876] [c7] systemd[1]: Started Load/Save Random Seed.
[    7.157247] [c4] systemd[1]: Mounted Configuration File System.
[    7.179762] [c4] systemd[1]: Started Create Static Device Nodes in /dev.
[    7.184987] [c4] systemd[1]: Starting udev Kernel Device Manager...
[    7.185339] [c4] systemd[1]: Reached target Local File Systems (Pre).
[    7.189763] [c5] systemd[1]: Mounting /tmp...
[    7.201279] [c6] systemd[1]: Started Apply Kernel Variables.
[    7.211328] [c6] systemd[1]: Mounted /tmp.
[    7.260045] [c6] systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
[    7.264474] [c6] systemd[1]: Starting Journal Service...
[    7.264860] [c6] systemd[1]: Reached target Local File Systems.
[    7.269667] [c6] systemd[1]: Starting Set console font and keymap...
[    7.282910] [c7] systemd[1]: Starting Armbian enhanced Log2Ram...
[    7.289401] [c5] systemd[1]: Starting Raise network interfaces...
[    7.292581] [c5] systemd[1]: Started udev Kernel Device Manager.
[    7.499194] [c5] systemd[1]: Started Armbian enhanced Log2Ram.
[    7.817237] [c0] systemd[1]: Started Journal Service.
[    7.864816] [c4] systemd-journald[309]: Received request to flush runtime journal from PID 1
[    8.212845] [c6] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
[    8.214570] [c6] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
[    8.218663] [c6] pd-mfc: Power-on latency exceeded, new value 3329125 ns
[    8.222354] [c6] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
[    8.223620] [c6] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
[    8.223784] [c6] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd971810, ctx = dcf2d800
[    8.224112] [c6] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
[    8.224254] [c6] s5p_mfc_dev_release:1801: power off
[    8.225076] [c6] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd971810
[    8.227323] [c5] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
[    8.228470] [c5] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
[    8.230694] [c5] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
[    8.232758] [c4] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
[    8.233058] [c4] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd971810, ctx = ddcec800
[    8.233361] [c4] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
[    8.233393] [c4] s5p_mfc_dev_release:1801: power off
[    8.233930] [c6] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd971810
[    8.284089] [c1] of_get_named_gpio_flags exited with status 190
[    8.284123] [c1] of_get_named_gpio_flags exited with status 25
[    8.324973] [c7] of_get_named_gpio_flags exited with status 190
[    8.336077] [c0] of_get_named_gpio_flags exited with status 25
[    8.337221] [c0] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
[    8.337296] [c0] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[    8.337312] [c0] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
[    8.337660] [c0] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
[    8.337703] [c0] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[    8.337718] [c0] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
[    9.068192] [c7] usbcore: registered new interface driver r8152
[    9.100849] [c7] usbcore: registered new interface driver cdc_ether
[    9.254723] [c0] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    9.266934] [c0] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    9.267182] [c0] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep ddd0db40
[    9.267196] [c0] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep ddd0db6c
[    9.267248] [c0] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep ddd0db98
[    9.304328] [c0] r8152 6-1:1.0 eth0: v2.07.0 (2016/06/14)
[    9.304352] [c0] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[   10.379522] [c6] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.930603] [c3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.189976] [c4] fuse init (API version 7.22)
[   41.480385] [c0] cgroup: systemd (1) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
root@odroidxu4:~#

 

 

Caleb

Edited by zador.blood.stained
Added spoiler tags
Link to comment
Share on other sites

Ahhh so i just fixed it....

 

change the boot.ini from

  GNU nano 2.5.3                                                       File: /boot/boot.ini

ODROIDXU-UBOOT-CONFIG

setenv rootdev "/dev/mmcblk0p1"

# U-Boot Parameters
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"

# Mac address configuration
setenv macaddr "00:1e:06:61:7a:55

#------------------------------------------------------------------------------------------------------
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
# --------------------------------
setenv bootrootfs "console=tty1 loglevel=1 root=${rootdev} rootwait ro fsck.repair=yes"

# boot parameter for serial console
console=ttySAC2,115200n8



to this

  GNU nano 2.5.3                                                       File: /boot/boot.ini

ODROIDXU-UBOOT-CONFIG

setenv rootdev "/dev/mmcblk0p1"

# U-Boot Parameters
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"

# Mac address configuration
setenv macaddr "00:1e:06:61:7a:55

#------------------------------------------------------------------------------------------------------
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
# --------------------------------
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 loglevel=1 root=${rootdev} rootwait ro fsck.repair=yes"

# boot parameter for serial console
console=ttySAC2,115200n8

All is well!

 

Thanks.

 

Caleb

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines