Andersf

I built mainline/Ubuntu and installed on Beelink X2 and OrangePi One. Seems to work fine with networking and docker. But what can I expect else? I guess there are problems, since the mainline image is not provided for these boards. OrangePi One: ---------------------- anders@orangepi2:~$ ssh orangepi3 anders@orangepi3's password: ___ ____ _ ___ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) / _ \ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | | | | | '_ \ / _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | | |_| | | | | __/ \___/|_| \__,_|_| |_|\__, |\___| |_| |_| \___/|_| |_|\___| |___/ Welcome to ARMBIAN 5.27 stable Ubuntu 16.04.2 LTS 4.10.1-sun8i System load: 0.00 Up time: 4 days Memory usage: 18 % of 496Mb I CPU temp: 40°C Usage of /: 18% of 15G anders@orangepi3:~$ cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 4.24 ms. hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 312 MHz, 480 MHz, 624 MHz, 816 MHz, 1.01 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance, schedutil current policy: frequency should be within 480 MHz and 1.01 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 480 MHz. cpufreq stats: 120 MHz:0.00%, 240 MHz:0.00%, 312 MHz:0.00%, 480 MHz:99.66%, 624 MHz:0.16%, 816 MHz:0.06%, 1.01 GHz:0.12% (335) analyzing CPU 1: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 4.24 ms. hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 312 MHz, 480 MHz, 624 MHz, 816 MHz, 1.01 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance, schedutil current policy: frequency should be within 480 MHz and 1.01 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 480 MHz. cpufreq stats: 120 MHz:0.00%, 240 MHz:0.00%, 312 MHz:0.00%, 480 MHz:99.66%, 624 MHz:0.16%, 816 MHz:0.06%, 1.01 GHz:0.12% (335) analyzing CPU 2: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 4.24 ms. hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 312 MHz, 480 MHz, 624 MHz, 816 MHz, 1.01 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance, schedutil current policy: frequency should be within 480 MHz and 1.01 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 480 MHz. cpufreq stats: 120 MHz:0.00%, 240 MHz:0.00%, 312 MHz:0.00%, 480 MHz:99.66%, 624 MHz:0.16%, 816 MHz:0.06%, 1.01 GHz:0.12% (335) analyzing CPU 3: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 4.24 ms. hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 312 MHz, 480 MHz, 624 MHz, 816 MHz, 1.01 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance, schedutil current policy: frequency should be within 480 MHz and 1.01 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 480 MHz. cpufreq stats: 120 MHz:0.00%, 240 MHz:0.00%, 312 MHz:0.00%, 480 MHz:99.66%, 624 MHz:0.16%, 816 MHz:0.06%, 1.01 GHz:0.12% (335) anders@orangepi3:~$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 22.85 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 22.85 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 2 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 22.85 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 3 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 22.85 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : Allwinner sun8i Family Revision : 0000 Serial : 02c00081cde2dd16 | __ ) ___ ___| (_)_ __ | | __ \ \/ /___ \ | _ \ / _ \/ _ \ | | '_ \| |/ / \ / __) | | |_) | __/ __/ | | | | | < / \ / __/ |____/ \___|\___|_|_|_| |_|_|\_\ /_/\_\_____| Welcome to ARMBIAN 5.27 stable Ubuntu 16.04.2 LTS 4.10.3-sun8i System load: 0.00 Up time: 2 days Memory usage: 4 % of 1001Mb CPU temp: 39°C Usage of /: 9% of 15G anders@beelinkx2:~$ cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: no or unknown cpufreq driver is active on this CPU maximum transition latency: 0.00 ms. analyzing CPU 1: no or unknown cpufreq driver is active on this CPU maximum transition latency: 0.00 ms. analyzing CPU 2: no or unknown cpufreq driver is active on this CPU maximum transition latency: 0.00 ms. analyzing CPU 3: no or unknown cpufreq driver is active on this CPU maximum transition latency: 0.00 ms. anders@beelinkx2:~$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 2 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 3 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : Allwinner sun8i Family Revision : 0000 Serial : 02c00081a88c7375

OK! Thanks for the answer. Thanks for Armbian. BR Anders

Hi Is docker supposed to run on OrangePi PC with Armbian 5.11? How about DM Thin below? BR Anders anders@orangepi1:~/bin$ sudo systemctl -l status docker â— docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled) Active: failed (Result: exit-code) since Fri 2016-06-03 17:48:47 CEST; 14min ago Docs: https://docs.docker.com Process: 571 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE) Main PID: 571 (code=exited, status=1/FAILURE) Jun 03 17:48:44 orangepi1 systemd[1]: Starting Docker Application Container Engine... Jun 03 17:48:46 orangepi1 docker[571]: time="2016-06-03T17:48:46.226560211+02:00" level=info msg="New containerd process, pid: 692\n" Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47.264771762+02:00" level=warning msg="Your Linux kernel version 3.4.112-sun8i can be unstable running docker. Please upgrade your kernel to 3.10.0." Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47.386711582+02:00" level=fatal msg="Error starting daemon: error initializing graphdriver: devicemapper: Error running deviceCreate (CreatePool) dm_task_run failed" Jun 03 17:48:47 orangepi1 systemd[1]: docker.service: main process exited, code=exited, status=1/FAILURE Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47+02:00" level=info msg="stopping containerd after receiving terminated" Jun 03 17:48:47 orangepi1 systemd[1]: Failed to start Docker Application Container Engine. Jun 03 17:48:47 orangepi1 systemd[1]: Unit docker.service entered failed state. anders@orangepi1:~/bin$ ./check-config.sh info: reading kernel config from /proc/config.gz ... Generally Necessary: - cgroup hierarchy: properly mounted [/sys/fs/cgroup] - CONFIG_NAMESPACES: enabled - CONFIG_NET_NS: enabled - CONFIG_PID_NS: enabled - CONFIG_IPC_NS: enabled - CONFIG_UTS_NS: enabled - CONFIG_DEVPTS_MULTIPLE_INSTANCES: enabled - CONFIG_CGROUPS: enabled - CONFIG_CGROUP_CPUACCT: enabled - CONFIG_CGROUP_DEVICE: enabled - CONFIG_CGROUP_FREEZER: enabled - CONFIG_CGROUP_SCHED: enabled - CONFIG_CPUSETS: enabled - CONFIG_MEMCG: missing - CONFIG_KEYS: enabled - CONFIG_MACVLAN: enabled (as module) - CONFIG_VETH: enabled (as module) - CONFIG_BRIDGE: enabled (as module) - CONFIG_BRIDGE_NETFILTER: enabled - CONFIG_NF_NAT_IPV4: missing - CONFIG_IP_NF_FILTER: enabled (as module) - CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module) - CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module) - CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled (as module) - CONFIG_NF_NAT: enabled (as module) - CONFIG_NF_NAT_NEEDED: enabled - CONFIG_POSIX_MQUEUE: enabled Optional Features: - CONFIG_USER_NS: enabled - CONFIG_SECCOMP: missing - CONFIG_CGROUP_PIDS: missing - CONFIG_MEMCG_SWAP: missing - CONFIG_MEMCG_SWAP_ENABLED: missing - CONFIG_MEMCG_KMEM: missing - CONFIG_RESOURCE_COUNTERS: enabled - CONFIG_BLK_CGROUP: enabled - CONFIG_BLK_DEV_THROTTLING: missing - CONFIG_IOSCHED_CFQ: enabled - CONFIG_CFQ_GROUP_IOSCHED: missing - CONFIG_CGROUP_PERF: enabled - CONFIG_CGROUP_HUGETLB: missing - CONFIG_NET_CLS_CGROUP: missing - CONFIG_NETPRIO_CGROUP: missing - CONFIG_CFS_BANDWIDTH: missing - CONFIG_FAIR_GROUP_SCHED: enabled - CONFIG_RT_GROUP_SCHED: enabled - CONFIG_EXT3_FS: missing - CONFIG_EXT3_FS_XATTR: missing - CONFIG_EXT3_FS_POSIX_ACL: missing - CONFIG_EXT3_FS_SECURITY: missing (enable these ext3 configs if you are using ext3 as backing filesystem) - CONFIG_EXT4_FS: enabled - CONFIG_EXT4_FS_POSIX_ACL: enabled - CONFIG_EXT4_FS_SECURITY: enabled - Network Drivers: - "overlay": - CONFIG_VXLAN: missing - Storage Drivers: - "aufs": - CONFIG_AUFS_FS: missing - "btrfs": - CONFIG_BTRFS_FS: enabled - "devicemapper": - CONFIG_BLK_DEV_DM: enabled - CONFIG_DM_THIN_PROVISIONING: missing - "overlay": - CONFIG_OVERLAY_FS: missing - "zfs": - /dev/zfs: missing - zfs command: missing - zpool command: missing Limits: - /proc/sys/kernel/keys/root_maxkeys: 1000000 anders@orangepi1:~/bin$ uname -a Linux orangepi1 3.4.112-sun8i #8 SMP PREEMPT Tue May 31 19:00:17 CEST 2016 armv7l GNU/Linux anders@orangepi1:~/bin$ uname -a Linux orangepi1 3.4.112-sun8i #8 SMP PREEMPT Tue May 31 19:00:17 CEST 2016 armv7l GNU/Linux anders@orangepi1:~/bin$ dpkg -l | grep orange ii linux-jessie-root-orangepih3 5.11 armhf Root file system tweaks for orangepih3 ii linux-u-boot-orangepih3-default 5.11 armhf Uboot loader 2016.05 anders@orangepi1:~/bin$ dpkg -l | grep docker rc docker 1.5-1 armhf System tray for KDE3/GNOME2 docklet applications iF docker-hypriot 1.11.1-1 armhf Docker: the open-source application container engine