Jean-Marc

Hi, Please could you give us more information about your Linux kernel version and driver used into your test. I am trying to use one Debian 5.10 standard kernel without capabilities to ping one external target connected on WAN port. At the same time, no problems encountered when connected (even with VLAN) on LAN port ? Thanks in advance for your help

About 10 minutes (!)

Igor, Thanks for your reply. I have tested many releases from Armbian, always with the same CLASS 10 from SANDISK ultra. It seems there is no issue for this point of view. Regards

Hi, Please find log file on nanopir1 and Armbian. Not possible for me to boot the target with a tty connected on internal chip. U-Boot SPL 2019.10-armbian (Jan 05 2020 - 01:28:29 +0100) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2019.10-armbian (Jan 05 2020 - 01:28:29 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi R1 DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: phy interface7 Error: ethernet@1c30000 address not set. eth-1: ethernet@1c30000 Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3789 bytes read in 4 ms (924.8 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 236 bytes read in 3 ms (76.2 KiB/s) 7341915 bytes read in 552 ms (12.7 MiB/s) 7741936 bytes read in 582 ms (12.7 MiB/s) Found mainline kernel configuration 29509 bytes read in 11 ms (2.6 MiB/s) 504 bytes read in 9 ms (54.7 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost0.dtbo 504 bytes read in 9 ms (54.7 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost1.dtbo 502 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-uart1.dtbo 4155 bytes read in 10 ms (405.3 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7341851 Bytes = 7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 498ff000, end 49fff71b ... OK Loading Device Tree to 4988f000, end 498fefff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Thanks in advance for your help .... Best regards

Hi, I am trying to boot image Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img, without success ... First, i am using following line to create SD ... ansible@solo:/mnt/backup$ sudo dd if=./Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img of=/dev/mmcblk0 bs=1M status=progress ;sudo sync After connected my tty on internal pins on PCB, it is possible to connect to this tty and look at the first u-boot log ... Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on May 6 2018, 08:02:47. Port /dev/tty-target-srv-nanopir1-170-position-1.2.4.1, 20:34:41 Press CTRL-A Z for help on special keys U-Boot SPL 2019.10-armbian (Feb 17 2020 - 06:18:08 +0100) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2019.10-armbian (Feb 17 2020 - 06:18:08 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi R1 DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: phy interface7 Error: ethernet@1c30000 address not set. eth-1: ethernet@1c30000 Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3789 bytes read in 3 ms (1.2 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 236 bytes read in 3 ms (76.2 KiB/s) 7342788 bytes read in 557 ms (12.6 MiB/s) 7744344 bytes read in 587 ms (12.6 MiB/s) Found mainline kernel configuration 29509 bytes read in 10 ms (2.8 MiB/s) 504 bytes read in 7 ms (70.3 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost0.dtbo 504 bytes read in 7 ms (70.3 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost1.dtbo 502 bytes read in 7 ms (69.3 KiB/s) Applying kernel provided DT overlay sun8i-h3-uart1.dtbo 4155 bytes read in 7 ms (579.1 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7342724 Bytes = 7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 498ff000, end 49fffa84 ... OK Loading Device Tree to 4988f000, end 498fefff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. But not possible to have the login (!). As a result, after umounting SD and modifying code in in /boot/armbianEnv.txt (verbosity=7), then following booting is always the same... Regards

Ok, thank for your reply. As a result, i have installed 4.19.62-sunxi kernel, and the target booting process is OK. But the bad news is that behavior is the same ..... root@srv-orangepir1-140:~# [10693.955976] EXT4-fs error (device dm-26): ext4_find_entry:1455: inode #12: comm apt: reading directory lblock 0 U-Boot SPL 2019.04-armbian (Jul 06 2019 - 00:26:54 +0200) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2019.04-armbian (Jul 06 2019 - 00:26:54 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi R1 DRAM: 256 MiB MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB EHCI 1.00 USB4: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... My SDCARD is a class 10 , and no issue on other embedded boards,

Hello, Sometimes, i have following errors on main syslog-ng server :

Igor, Sorry, it was in the documentation (!) One Ethernet device gets random MAC

Igor, Thanks for your reply. I have done new tests based on image: Armbian_19.11.3_Nanopi-r1_buster_current_5.3.9.7z test 1 : -------- Disconnect power, then reconnect power root@nanopi:~# armbianmonitor -u System diagnosis information will now be uploaded to http://ix.io/22vY Please post the URL in the forum where you've been asked for. test 2: ------- Disconnect power, then reconnect power root@nanopi:~# armbianmonitor -u System diagnosis information will now be uploaded to http://ix.io/22vZ Please post the URL in the forum where you've been asked for. root@nanopi:~# Conclusions: Eth0 (Wan port) is ok, but ... It seems that the MAC address on Ethernet port eth1 changed on each reboot, and on eth0, it is always the same. Could you please confirm this behaviour ? On file : http://ix.io/22vZ ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether be:11:34:10:e5:f0 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:81:68:ec:e7:fa brd ff:ff:ff:ff:ff:ff 4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 66:f4:99:6c:47:19 brd ff:ff:ff:ff:ff:ff 5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 8c:f7:10:9e:fc:f1 brd ff:ff:ff:ff:ff:ff On file : http://ix.io/22vY ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet XXX.XXX.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 32:cf:8d:ea:60:bc brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:81:68:ec:e7:fa brd ff:ff:ff:ff:ff:ff 4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ae:6d:32:73:9b:8f brd ff:ff:ff:ff:ff:ff 5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 8c:f7:10:9e:fc:f1 brd ff:ff:ff:ff:ff:ff Thanks for your help

Hello, is there a user of orangepiR1 with traces of good operation of the 2 Ethernet interfaces simultaneously? In advance, please provide the boot log of the kernel and the DTB version number

Hi, I am running Debian buster 10.1 with following kernel on nanopir1 (1Gb of RAM) Linux srv-nanopir1-170 5.3.9-sunxi #5.99.191113 SMP Wed Nov 13 08:12:49 CET 2019 armv7l GNU/Linux I have all services up on local LAN Ethernet port, but not possible for me to setup WAN Ethernet port . Packages installed are .... The boot sequence is ... My current network configuration in udev is .... As a result, r8152 kernel module is correctly installed After connected one RJ45 to external DHCP server (running) , it is not possible to setup interface According hardware documentation, it seems that WAN port is based on on RTL8211E (§ 3.1) http://wiki.friendlyarm.com/wiki/index.php/NanoPi_R1 As a result, perhaps this bug is due to the fact there is no rtl8211e drivers Where is the firmware and the drivers ? Thanks in advance for your help tty-from-srv-nanopir1-170-2019-11-14-15h-39min.ok.txt

Thanks, Of course, you have right, not possible to boot this kernel . After creating a new sdcard with armbian last buster and update+upgrade, i have following error root@srv-orangepir1-150:~# [ 2201.407757] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mpage_map_and_submit_extent+0x5d5/0x5dc [ 2201.407757] [ 2201.408003] BUG: Bad rss-counter state mm:bc76d143 idx:0 val:15 [ 2201.412010] Unable to handle kernel paging request at virtual address cfa17500 [ 2201.412019] pgd = 0b15e16e [ 2201.412024] [cfa17500] *pgd=4fa1141e(bad) [ 2201.412038] Internal error: Oops: 8000000d [#1] SMP THUMB2 [ 2201.412043] Modules linked in: nf_tables nfnetlink veth dm_mod dax 8189es snd_soc_simple_card snd_soc_simple_card_utils sun8i_codec_analog sun4i_i2s sun8i_adda_pr_regmap snd_soc_core lima cfg80211 snd_pcm_dmaengine cdc_ether snd_pcm usbnet sun4i_gpadc_iio gpu_sched snd_timer r8152 ttm industrialio snd soundcore sun8i_ths cpufreq_dt uio_pdrv_genirq thermal_sys uio pwrseq_simple [ 2201.412130] CPU: 1 PID: 2856 Comm: monit Not tainted 4.19.62-sunxi #5.92 [ 2201.412133] Hardware name: Allwinner sun8i Family [ 2201.412141] PC is at 0xcfa17500 [ 2201.412152] LR is at try_to_del_timer_sync+0x3b/0x54 [ 2201.412157] pc : [<cfa17500>] lr : [<c016efeb>] psr: 60070013 [ 2201.412160] sp : cd945c68 ip : cd94403c fp : 00000001 [ 2201.412164] r10: c090ba6b r9 : 0000007d r8 : 00000000 [ 2201.412168] r7 : c0e04d48 r6 : c0e04d48 r5 : 00000002 r4 : cd945ca4 [ 2201.412172] r3 : e298f2ae r2 : e298f2ae r1 : 40070013 r0 : 0000007d [ 2201.412178] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2201.412183] Control: 50c5387d Table: 4e16006a DAC: 00000051 [ 2201.412187] Process monit (pid: 2856, stack limit = 0xd700aa4c) [ 2201.412192] Stack: (0xcd945c68 to 0xcd946000) [ 2201.412200] 5c60: c013b33d 00000100 00000200 e298f2ae 00000200 c06f54a1 [ 2201.412209] 5c80: cfd48480 cde7c780 c0e04d48 cd945ca8 00000000 cd945ce8 000001f4 00000005 [ 2201.412218] 5ca0: 80000280 c06f548b 00000001 00020002 cd945c74 cd945c74 00000000 e298f2ae [ 2201.412227] 5cc0: 00000004 ce115c00 c0e04d48 cdb66000 00000004 00000133 0000b400 c06f5557 [ 2201.412235] 5ce0: 000000c0 ce115280 00000000 e298f2ae 00000000 ce115280 00000004 0000b400 [ 2201.412244] 5d00: 00000133 cf8ef580 00000001 00001000 cd945f78 bf8d209b 0000b400 00000133 [ 2201.412253] 5d20: ce115280 00000004 000001f4 c066e9ad 00000133 cf8ef580 c0e04d48 cf8ef580 [ 2201.412262] 5d40: cd945d80 bf8d31db cd945d80 c0e03d00 ffffe000 00000133 0000fffc bf8d408d [ 2201.412270] 5d60: 00000133 00000001 cd945dbc ffffb400 00000000 bf8d4119 00080040 cf228420 [ 2201.412279] 5d80: cf228498 e298f2ae cf8ef85c cd945e84 00000000 000002cf cf8ef000 bf8d4159 [ 2201.412288] 5da0: bf8d4131 c06d72fb cf8ef000 cd945e84 00000000 cf8ef87c ce44db38 cde7c300 [ 2201.412297] 5dc0: 00001000 bf8d289f bf8d286d c0e04d48 cf8ef000 bf8d97ec cd945e84 c07eb093 [ 2201.412305] 5de0: ce115c40 cdec7a20 00000000 cd245a90 ce60c900 c0a18848 00000000 ce60c900 [ 2201.412314] 5e00: cd0a3440 c0b939a8 00080040 c024656d 00000000 e298f2ae ffffffff c0e04d48 [ 2201.412323] 5e20: ce44d800 c0abf540 cd945e84 c07eb093 00000000 00000000 cee44088 c02499eb [ 2201.412331] 5e40: cd945edc c01959ef 00000000 00000004 00000000 c0e04d48 00000000 c0e04d48 [ 2201.412340] 5e60: be919b78 e298f2ae ffffe000 c0e04d48 ce44db30 ccaea000 ccaea000 c0805f47 [ 2201.412349] 5e80: 00000011 00000000 00000000 00200200 00000001 00000000 00000000 00000000 [ 2201.412356] 5ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2201.412365] 5ec0: 00000000 00000000 00000000 e298f2ae c0ed1bc0 c0805efd c0a89dec c0662f3f [ 2201.412374] 5ee0: c0662f2d cd63fcb8 00001000 c029e98d c029e92d cd63fcb8 00000001 00001000 [ 2201.412382] 5f00: ce60c900 007000c0 cd63fcd0 c025ae3b 00000001 00000000 cd63fce8 00001000 [ 2201.412391] 5f20: 02069470 c023ecb5 ce60c900 00000000 02069470 00001000 ffffe000 cd945f78 [ 2201.412400] 5f40: ce60c900 00001000 020b78e8 c023ecb5 00004000 02069470 02069470 ce60c900 [ 2201.412409] 5f60: c0e04d48 ce60c903 02069470 00000000 00000000 c023f061 00000000 00000000 [ 2201.412417] 5f80: 00000000 e298f2ae 00000074 00001000 02069470 00000003 c0101224 cd944000 [ 2201.412426] 5fa0: 00000003 c0101001 00000074 00001000 00000006 02069470 00001000 00000000 [ 2201.412435] 5fc0: 00000074 00001000 02069470 00000003 b6f344d0 be919e18 00000000 020b78e8 [ 2201.412443] 5fe0: 00000003 be919bf0 b6b38555 b6ac1746 800f0030 00000006 00000000 00000000 [ 2201.412467] [<c016efeb>] (try_to_del_timer_sync) from [<c06f54a1>] (usb_start_wait_urb+0x7d/0xa4) [ 2201.412477] [<c06f54a1>] (usb_start_wait_urb) from [<cd945c74>] (0xcd945c74) [ 2201.412486] Code: 00000000 00000000 00000000 00000000 (00000000) [ 2201.412492] ---[ end trace 183b5afa6da22150 ]--- Thanks to find in attached file all logs with many reboot -!). My sdcard is a 16 Go SANDISK class 10. All my targets are using (from 2 years ago) this type of sdcard without any issue, but perhaps that this one is not OK (?). On other Armbian kernel, (Cubietruck, HC1, Rock64, nanopiR1), i have also the same SD without any issue. Of course, it is not the same kernel and sometimes stretch instead of buster Just after booting orangepiR1 target, i have : root@srv-orangepir1-150:~# LANG=C LC_ALL=C pstree -anp init,1 |-systemd-udevd,349 |-syslog-ng,2519 | `-syslog-ng,2520 -p /var/run/syslog-ng.pid --no-caps |-cron,2661 |-dbus-daemon,2689 --system |-sshd,2804 |-monit,2856 -c /etc/monit/monitrc | |-{monit},2867 | |-{monit},2884 | |-(verify_ipv4_add,3131) | |-(verify_ipv4_add,3132) | |-(verify_ipv4_add,3135) | `-(verify_ipv4_add,3138) |-getty,2879 115200 console |-getty,2880 38400 tty2 |-getty,2881 38400 tty3 |-getty,2882 38400 tty4 `-login,2883 -- `-bash,2890 `-pstree,3154 -anp root@srv-orangepir1-150:~# tty-from-srv-orangepir1-150-2019-08-16-14h-34min.ok.txt

....but at the same time, on one another target (orangepiR1), but running Buster armbain & Debian, access is without any error? ansible@srv-orangepir1-150:~$ sudo grep -iR deb /etc/apt/sources* |grep -v "#" /etc/apt/sources.list.d/debian_apt_v_10_buster_backports.list:deb http://ftp.fr.debian.org/debian buster-backports main contrib non-free /etc/apt/sources.list.d/debian_apt_v_10_buster_previous.list:deb http://ftp.debian.org/debian/ stretch main contrib non-free /etc/apt/sources.list.d/debian_apt_v_10_buster_update_security.list:deb http://security.debian.org buster/updates main contrib non-free /etc/apt/sources.list.d/armbian_apt_v_10_buster.list:deb http://apt.armbian.com buster main buster-utils buster-desktop /etc/apt/sources.list.d/debian_apt_v_10_buster_current.list:deb http://ftp.debian.org/debian/ buster main contrib non-free /etc/apt/sources.list.d/debian_apt_v_10_buster_updates.list:deb http://ftp.fr.debian.org/debian buster-updates main contrib non-free ansible@srv-orangepir1-150:~$ LANG=C LC_ALL=C sudo apt update Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://ftp.fr.debian.org/debian buster-backports InRelease Hit:3 http://ftp.debian.org/debian buster InRelease Hit:5 http://ftp.fr.debian.org/debian buster-updates InRelease Ign:6 http://ftp.debian.org/debian stretch InRelease Hit:7 http://ftp.debian.org/debian stretch Release Hit:4 https://apt.armbian.com buster InRelease Reading package lists... Done Building dependency tree Reading state information... Done All packages are up to date. ansible@srv-orangepir1-150:~$ ansible@srv-orangepir1-150:~$ LANG=C LC_ALL=C sudo apt upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. Strange ?

Hi, this day, always the same behaviour ????, but on target nanopiR1 for Debian stretch ansible@srv-nanopir1-170:~$ LANG=C LANGUAGE=C sudo apt-get update Hit:1 http://ftp.fr.debian.org/debian stretch-backports InRelease Ign:2 http://ftp.debian.org/debian stretch InRelease Hit:3 http://security.debian.org stretch/updates InRelease Hit:5 http://ftp.fr.debian.org/debian stretch-updates InRelease Hit:6 http://ftp.debian.org/debian buster InRelease Ign:4 https://apt.armbian.com stretch InRelease Hit:7 http://ftp.debian.org/debian stretch Release Ign:8 https://apt.armbian.com stretch Release Ign:9 https://apt.armbian.com stretch/main armhf Packages Ign:10 https://apt.armbian.com stretch/main all Packages Ign:11 https://apt.armbian.com stretch/main Translation-C Ign:12 https://apt.armbian.com stretch/main Translation-fr_FR Ign:13 https://apt.armbian.com stretch/main Translation-en Ign:14 https://apt.armbian.com stretch/main Translation-fr Ign:15 https://apt.armbian.com stretch/main all Contents (deb) Ign:16 https://apt.armbian.com stretch/main armhf Contents (deb) Ign:17 https://apt.armbian.com stretch armhf Contents (deb) Ign:18 https://apt.armbian.com stretch all Contents (deb) Ign:19 https://apt.armbian.com stretch/stretch-utils armhf Packages Ign:20 https://apt.armbian.com stretch/stretch-utils all Packages Ign:21 https://apt.armbian.com stretch/stretch-utils Translation-fr Ign:22 https://apt.armbian.com stretch/stretch-utils Translation-en Ign:23 https://apt.armbian.com stretch/stretch-utils Translation-C Ign:24 https://apt.armbian.com stretch/stretch-utils Translation-fr_FR Ign:25 https://apt.armbian.com stretch/stretch-utils armhf Contents (deb) Ign:26 https://apt.armbian.com stretch/stretch-utils all Contents (deb) Ign:27 https://apt.armbian.com stretch/stretch-desktop all Packages Ign:28 https://apt.armbian.com stretch/stretch-desktop armhf Packages Ign:29 https://apt.armbian.com stretch/stretch-desktop Translation-fr Ign:30 https://apt.armbian.com stretch/stretch-desktop Translation-en Ign:31 https://apt.armbian.com stretch/stretch-desktop Translation-fr_FR Ign:32 https://apt.armbian.com stretch/stretch-desktop Translation-C Ign:33 https://apt.armbian.com stretch/stretch-desktop all Contents (deb) Ign:34 https://apt.armbian.com stretch/stretch-desktop armhf Contents (deb) Ign:9 https://apt.armbian.com stretch/main armhf Packages Ign:10 https://apt.armbian.com stretch/main all Packages Ign:11 https://apt.armbian.com stretch/main Translation-C Ign:12 https://apt.armbian.com stretch/main Translation-fr_FR Ign:13 https://apt.armbian.com stretch/main Translation-en Ign:14 https://apt.armbian.com stretch/main Translation-fr Ign:15 https://apt.armbian.com stretch/main all Contents (deb) Ign:16 https://apt.armbian.com stretch/main armhf Contents (deb) Ign:17 https://apt.armbian.com stretch armhf Contents (deb) Ign:18 https://apt.armbian.com stretch all Contents (deb) Ign:19 https://apt.armbian.com stretch/stretch-utils armhf Packages Ign:20 https://apt.armbian.com stretch/stretch-utils all Packages Ign:21 https://apt.armbian.com stretch/stretch-utils Translation-fr Ign:22 https://apt.armbian.com stretch/stretch-utils Translation-en Ign:23 https://apt.armbian.com stretch/stretch-utils Translation-C Ign:24 https://apt.armbian.com stretch/stretch-utils Translation-fr_FR Ign:25 https://apt.armbian.com stretch/stretch-utils armhf Contents (deb) Ign:26 https://apt.armbian.com stretch/stretch-utils all Contents (deb) Ign:27 https://apt.armbian.com stretch/stretch-desktop all Packages Ign:28 https://apt.armbian.com stretch/stretch-desktop armhf Packages Ign:29 https://apt.armbian.com stretch/stretch-desktop Translation-fr Ign:30 https://apt.armbian.com stretch/stretch-desktop Translation-en Ign:31 https://apt.armbian.com stretch/stretch-desktop Translation-fr_FR Ign:32 https://apt.armbian.com stretch/stretch-desktop Translation-C Ign:33 https://apt.armbian.com stretch/stretch-desktop all Contents (deb) Ign:34 https://apt.armbian.com stretch/stretch-desktop armhf Contents (deb) Ign:9 https://apt.armbian.com stretch/main armhf Packages Ign:10 https://apt.armbian.com stretch/main all Packages Ign:11 https://apt.armbian.com stretch/main Translation-C Ign:12 https://apt.armbian.com stretch/main Translation-fr_FR Ign:13 https://apt.armbian.com stretch/main Translation-en Ign:14 https://apt.armbian.com stretch/main Translation-fr Ign:15 https://apt.armbian.com stretch/main all Contents (deb) Ign:16 https://apt.armbian.com stretch/main armhf Contents (deb) Ign:17 https://apt.armbian.com stretch armhf Contents (deb) Ign:18 https://apt.armbian.com stretch all Contents (deb) Ign:19 https://apt.armbian.com stretch/stretch-utils armhf Packages Ign:20 https://apt.armbian.com stretch/stretch-utils all Packages Ign:21 https://apt.armbian.com stretch/stretch-utils Translation-fr Ign:22 https://apt.armbian.com stretch/stretch-utils Translation-en Ign:23 https://apt.armbian.com stretch/stretch-utils Translation-C Ign:24 https://apt.armbian.com stretch/stretch-utils Translation-fr_FR Ign:25 https://apt.armbian.com stretch/stretch-utils armhf Contents (deb) Ign:26 https://apt.armbian.com stretch/stretch-utils all Contents (deb) Ign:27 https://apt.armbian.com stretch/stretch-desktop all Packages Ign:28 https://apt.armbian.com stretch/stretch-desktop armhf Packages Ign:29 https://apt.armbian.com stretch/stretch-desktop Translation-fr Ign:30 https://apt.armbian.com stretch/stretch-desktop Translation-en Ign:31 https://apt.armbian.com stretch/stretch-desktop Translation-fr_FR Ign:32 https://apt.armbian.com stretch/stretch-desktop Translation-C Ign:33 https://apt.armbian.com stretch/stretch-desktop all Contents (deb) Ign:34 https://apt.armbian.com stretch/stretch-desktop armhf Contents (deb) Ign:9 https://apt.armbian.com stretch/main armhf Packages Ign:10 https://apt.armbian.com stretch/main all Packages Ign:11 https://apt.armbian.com stretch/main Translation-C Ign:12 https://apt.armbian.com stretch/main Translation-fr_FR Ign:13 https://apt.armbian.com stretch/main Translation-en Ign:14 https://apt.armbian.com stretch/main Translation-fr Ign:15 https://apt.armbian.com stretch/main all Contents (deb) Ign:16 https://apt.armbian.com stretch/main armhf Contents (deb) Ign:17 https://apt.armbian.com stretch armhf Contents (deb) Ign:18 https://apt.armbian.com stretch all Contents (deb) Ign:19 https://apt.armbian.com stretch/stretch-utils armhf Packages Ign:20 https://apt.armbian.com stretch/stretch-utils all Packages Ign:21 https://apt.armbian.com stretch/stretch-utils Translation-fr Ign:22 https://apt.armbian.com stretch/stretch-utils Translation-en Ign:23 https://apt.armbian.com stretch/stretch-utils Translation-C Ign:24 https://apt.armbian.com stretch/stretch-utils Translation-fr_FR Ign:25 https://apt.armbian.com stretch/stretch-utils armhf Contents (deb) Ign:26 https://apt.armbian.com stretch/stretch-utils all Contents (deb) Ign:27 https://apt.armbian.com stretch/stretch-desktop all Packages Ign:28 https://apt.armbian.com stretch/stretch-desktop armhf Packages Ign:29 https://apt.armbian.com stretch/stretch-desktop Translation-fr Ign:30 https://apt.armbian.com stretch/stretch-desktop Translation-en Ign:31 https://apt.armbian.com stretch/stretch-desktop Translation-fr_FR Ign:32 https://apt.armbian.com stretch/stretch-desktop Translation-C Ign:33 https://apt.armbian.com stretch/stretch-desktop all Contents (deb) Ign:34 https://apt.armbian.com stretch/stretch-desktop armhf Contents (deb) Ign:9 https://apt.armbian.com stretch/main armhf Packages Ign:10 https://apt.armbian.com stretch/main all Packages Ign:11 https://apt.armbian.com stretch/main Translation-C Ign:12 https://apt.armbian.com stretch/main Translation-fr_FR Ign:13 https://apt.armbian.com stretch/main Translation-en Ign:14 https://apt.armbian.com stretch/main Translation-fr Ign:15 https://apt.armbian.com stretch/main all Contents (deb) Ign:16 https://apt.armbian.com stretch/main armhf Contents (deb) Ign:17 https://apt.armbian.com stretch armhf Contents (deb) Ign:18 https://apt.armbian.com stretch all Contents (deb) Ign:19 https://apt.armbian.com stretch/stretch-utils armhf Packages Ign:20 https://apt.armbian.com stretch/stretch-utils all Packages Ign:21 https://apt.armbian.com stretch/stretch-utils Translation-fr Ign:22 https://apt.armbian.com stretch/stretch-utils Translation-en Ign:23 https://apt.armbian.com stretch/stretch-utils Translation-C Ign:24 https://apt.armbian.com stretch/stretch-utils Translation-fr_FR Ign:25 https://apt.armbian.com stretch/stretch-utils armhf Contents (deb) Ign:26 https://apt.armbian.com stretch/stretch-utils all Contents (deb) Ign:27 https://apt.armbian.com stretch/stretch-desktop all Packages Ign:28 https://apt.armbian.com stretch/stretch-desktop armhf Packages Ign:29 https://apt.armbian.com stretch/stretch-desktop Translation-fr Ign:30 https://apt.armbian.com stretch/stretch-desktop Translation-en Ign:31 https://apt.armbian.com stretch/stretch-desktop Translation-fr_FR Ign:32 https://apt.armbian.com stretch/stretch-desktop Translation-C Ign:33 https://apt.armbian.com stretch/stretch-desktop all Contents (deb) Ign:34 https://apt.armbian.com stretch/stretch-desktop armhf Contents (deb) Err:9 https://apt.armbian.com stretch/main armhf Packages Reading package lists... Done W: The repository 'http://apt.armbian.com stretch Release' does not have a Release file. N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use. N: See apt-secure(8) manpage for repository creation and user configuration details. E: Failed to fetch https://apt.armbian.com/dists/stretch/main/binary-armhf/Packages E: Failed to fetch https://apt.armbian.com/dists/stretch/main/binary-all/Packages E: Failed to fetch https://apt.armbian.com/dists/stretch/main/i18n/Translation-C E: Failed to fetch https://apt.armbian.com/dists/stretch/main/i18n/Translation-fr_FR E: Failed to fetch https://apt.armbian.com/dists/stretch/main/i18n/Translation-en E: Failed to fetch https://apt.armbian.com/dists/stretch/main/i18n/Translation-fr E: Failed to fetch https://apt.armbian.com/dists/stretch/main/Contents-all E: Failed to fetch https://apt.armbian.com/dists/stretch/main/Contents-armhf E: Failed to fetch https://apt.armbian.com/dists/stretch/Contents-armhf E: Failed to fetch https://apt.armbian.com/dists/stretch/Contents-all E: Failed to fetch https://apt.armbian.com/dists/stretch/stretch-utils/binary-armhf/Packages E: Some index files failed to download. They have been ignored, or old ones used instead. ansible@srv-nanopir1-170:~$ My configuration is : ansible@srv-nanopir1-170:~$ grep -iR deb /etc/apt/sources* |grep -v "#" /etc/apt/sources.list.d/debian_apt_v_9_stretch_backports.list:deb http://ftp.fr.debian.org/debian stretch-backports main contrib non-free /etc/apt/sources.list.d/armbian_apt_v_9_stretch.list:deb http://apt.armbian.com stretch main stretch-utils stretch-desktop /etc/apt/sources.list.d/debian_apt_v_9_stretch_current.list:deb http://ftp.debian.org/debian/ stretch main contrib non-free /etc/apt/sources.list.d/debian_apt_v_9_stretch_update_security.list:deb http://security.debian.org stretch/updates main contrib non-free /etc/apt/sources.list.d/debian_apt_v_9_stretch_updates.list:deb http://ftp.fr.debian.org/debian stretch-updates main contrib non-free /etc/apt/sources.list.d/debian_apt_v_9_stretch_next.list:deb http://ftp.debian.org/debian/ buster main contrib non-free

Very hard to reproduce. As a result, i am trying the same test with following Debian package .... linux-image-4.9.0-8-armmp-lpae armhf 4.9.110-3+deb9u6 ..... But target does not reboot on new kernel, it is always on 4.19.62-sunxi. After analysing /boot directory , it seems there is a bad link for zImage, because .... root@srv-orangepir1-150:~# LC_ALL=C ls -al /boot total 44176 drwxr-xr-x 4 root root 4096 Aug 11 20:32 . drwxr-xr-x 22 root root 4096 Aug 11 20:25 .. -rw-r--r-- 1 root root 0 Aug 4 17:25 .next -rw-r--r-- 1 root root 3299149 Jul 31 20:07 System.map-4.19.62-sunxi -rw-r--r-- 1 root root 3026026 Oct 8 2018 System.map-4.9.0-8-armmp-lpae -rw-r--r-- 1 root root 424 Jul 20 11:13 armbianEnv.txt -rw-r--r-- 1 root root 1536 May 4 08:54 armbian_first_run.txt.template -rw-r--r-- 1 root root 4882 May 4 08:54 boot-desktop.png -rw-r--r-- 1 root root 230454 May 4 08:54 boot.bmp -rw-r--r-- 1 root root 3726 May 4 08:52 boot.cmd -rw-rw-r-- 1 root root 3798 May 4 08:56 boot.scr -rw-r--r-- 1 root root 162659 Jul 31 20:07 config-4.19.62-sunxi -rw-r--r-- 1 root root 190506 Oct 8 2018 config-4.9.0-8-armmp-lpae lrwxrwxrwx 1 root root 17 Aug 4 17:25 dtb -> dtb-4.19.62-sunxi drwxr-xr-x 3 root root 12288 Aug 4 17:24 dtb-4.19.62-sunxi lrwxrwxrwx 1 root root 17 Jul 7 13:37 dtb.old -> dtb-4.19.57-sunxi -rw-r--r-- 1 root root 3815594 Aug 11 20:26 initrd.img-4.19.57-sunxi -rw-r--r-- 1 root root 17583555 Aug 11 20:32 initrd.img-4.9.0-8-armmp-lpae drwxrwxr-x 2 root root 4096 May 4 08:54 overlay-user lrwxrwxrwx 1 root root 21 Jul 7 21:11 uInitrd -> uInitrd-4.19.57-sunxi -rw-r--r-- 1 root root 5534009 Jul 7 21:11 uInitrd-4.19.57-sunxi -rwxr-xr-x 1 root root 7497384 Jul 31 20:07 vmlinuz-4.19.62-sunxi -rw-r--r-- 1 root root 3819952 Oct 8 2018 vmlinuz-4.9.0-8-armmp-lpae lrwxrwxrwx 1 root root 21 Aug 4 17:25 zImage -> vmlinuz-4.19.62-sunxi root@srv-orangepir1-150:~# work in progress...