pluton

Well, i will use a other image on this board I think... :/ Last info, I can boot Armbian with Upgrade button pushed. On the board, green led stick and red led flash. I can interact in console, log in root but when I want to change the password, got: Authentication token manipulation error And when i release the upgrade key, Armbian crashe and print this: 1212[ 80.401270] Unable to handle kernel paging request at virtual address 00100104 [ 80.410019] pgd = c0004000 [ 80.410019] [00100104] *pgd=00000000 [ 80.410019] sunxi oops: enable sdcard JTAG interface [ 80.410019] sunxi oops: cpu frequency: 480 MHz [ 80.410019] sunxi oops: ddr frequency: 624 MHz [ 80.410019] sunxi oops: gpu frequency: 105 MHz [ 80.410019] sunxi oops: cpu temperature: 10 [ 80.410019] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 80.410019] Modules linked in: ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder If this change anything, tell me I you want test an other solution. Or else, stop waste your time with tis, I will use a other image. Finally, thanks for all your help with this problem! I will be back on Armbian on other card one day

Hi @zador.blood.stained Ok I download again the Armbian_5.25_Orangepiplus2e_Debian_jessie_default_3.4.113.img and verify checksum, it's ok. I use Etcher with my Samsung Evo 16Go it's ok too. I use power supply from Orange Pi's seller (work with my two other boards). And it's not work again... I plug and unplug a lot of times, and boot stuck everytimes. I can't understand why other image boot correctly (on SD and EMMC) but not armbian. There is nothing to do to patch armbian for this problem? EDIT: I found a trick: push the upgrade bouton a armbian boot corectly 2 on 3 times from SD. But when i release the button, Armbian crash... I give you a log, when Armbian start and last line of this log it when the button is release. Maybe a issue ? upgradeButton.txt

I try again and again and same result... I think the last option is to recompile uboot... Do you have any documentation to help me in that task please @zador.blood.stained?

Ok I test with 2 others sd card and a second A/C adapter. Same result for the first SD card, tested with the two alimentations. The second, after som tries (because I get block at : Trying to boot from MMC1), give me that: U-Boot 2017.01-armbian (Feb 02 2017 - 03:03:34 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E I2C: ready DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 6944 bytes read in 158 ms (42 KiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2652 bytes read in 194 ms (12.7 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 123 bytes read in 134 ms (0 Bytes/s) Unknown command '▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒data abort pc : [<bdf714d4>] lr : [<bdf67930>] reloc pc : [<4a0184d4>] lr : [<4a00e930>] sp : b9f33c50 ip : bdfb0250 fp : 00000018 r10: b9f641a8 r9 : b9f38ee0 r8 : 00000000 r7 : 00000000 r6 : b9f643d8 r5 : b9f67426 r4 : 00000001 r3 : b9f67428 r2 : 00000000 r1 : fffffffe r0 : b9f67430 Flags: nZCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot SPL 2017.01-armbian (Feb 02 2017 - 03:03:34) DRAM: 2048 MiB Trying to boot from MMC1

I try again tonight to fix the SD switch, then I got this log with a sd card in sd card reader: U-Boot 2017.01-armbian (Feb 02 2017 - 03:03:34 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E I2C: ready DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 6944 bytes read in 155 ms (43 KiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2652 bytes read in 191 ms (12.7 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 123 bytes read in 132 ms (0 Bytes/s) ** ext4fs_devread read error - block The last line show a mmc error, no? If it's possible to recompile uboot to bypass this SDCard verification, do you think it's a better alternative for all Orange Pi's images? I'm not the first with this problem, as I can see in this forum... Can you tell me where I can found some documentations about that?

I'm baaaack with a TTL Cable! So this is how I process: 1: test with a flash sd card with armbian. TTL information in sdBoot.txt @zador.blood.stained I think it's a sd card switch broken like you said.. 2: Boot in FEL mode, flash EMMC with Disk32Imager. FEL Boot information in felBoot.txt. 3: Boot with only TTL cable + A/C Log in bootxMMC.txt. Sometimes, boot stuck from at "Trying to boot from MMC2", I ned to plug and unplug A/C (cf boot3EMMC.txt). I don't understand what happens on this card... @zador.blood.stained these logs help you to understand? boot1MMC.txt boot2MMC.txt boot3MMC.txt felBoot.txt sdBoot.txt

Yep i know I will receive it tommorow

HI @zador.blood.stained ty for your attention of my problem. I already test this solution with a version of ubuntu, I tested again tonight According to this: https://bananapi.gitbooks.io/bpi-m3/zh/howtoburnlinuximagetoemmc.html I use the same command, but with img name of Armbian Debian OrangePi + 2E, result of copy seem to be ok. After unplug SD and reboot, same result: black screen, no keyboard reaction. I think i will buy a ttl cable because I can't understant why this **** card won't working with armbian...

I repost i know, but anyone know if i can compile my own image with an old U-Boot which works with a broken sd-card reader? :/

I search for give you serial console @zador.blood.stained but I don't have any cable for that... Do you think I can write to emmc the .img file from a other OS? Or do you have any solution to use the old u-boot with Armbian? Now, I'm totally lost and Aliexpress won't refund me...

Thanks for your help really @zador.blood.stained. For information, I open a mediation with aliexpress, this card have some problems i think... In fact, I need to push the upgrade key on the board for writing with sunxi-fel and it's work 2 on 3 times. How can give you serial log? I extract it, I nee to use only this file to write on board or bin + other file in your repo?

@zador.blood.stained I test again today, this is how i do it: - Plug SD card and micro sd cable in Orange Pi - Card is detected by sunxi-fel.exe. - Use script start.bat (I must do a lot of tries, i have a lot of timeout) - Card disconnect and reconnect as a windows storage - Remove all partitions and formate it (i can acess from explorer) - Flash the last Armbian with win32diskimage or etcher - Disconnect and boot without sd - Same result with a sd card: black screen... Do you know what i did wrong in this steps? Do you have uboot file to boot with usb with a orange pi plus 2e? Thanks for all your help with my problem...

Ok, i execute start.bat (i use Win10 x64), this is the result (after some tries, I hava a lot of timeout): \fel-mass-storage-master>start.bat "Connect device in FEL mode and press <Enter>" Appuyez sur une touche pour continuer... Stack pointers: sp_irq=0x00002000, sp=0x00005E08 MMU is not enabled by BROM Generating the new MMU translation table at 0x00008000 => Executing the SPL... done. Setting write-combine mapping for DRAM. Setting cached mapping for BROM. Writing back the MMU translation table. Enabling I-cache, MMU and branch prediction... done. Writing image "U-Boot 2016.09-armbian-fel-mass-", 247509 bytes @ 0x4A000000. 100% [================================================] 4575 kB, 940.7 kB/s 100% [================================================] 21 kB, 984.9 kB/s 100% [================================================] 2230 kB, 935.3 kB/s 100% [================================================] 0 kB, 82.6 kB/s Passing boot info via sunxi SPL: script address = 0x43100000 Starting U-Boot (0x4A000000). Appuyez sur une touche pour continuer... After that i see emmc in partition manager. i flash it with win32 and etcher but nothing boot after flash. :'( I did something wrong ?

Yep I don't see it, thanks We are agree, I need to plug flash usb stick on card?

Thanks, I tested like this: Flash SD Card with image on Github Plug usb to card and PC Windows detect card as Unknow Device 1 Install WinUSB with Zadig Then, nothing I Can see SD or EMMC from "My PC", did i miss anything? Ok i miss this page: https://linux-sunxi.org/FEL/USBBoot work on it EDIT; So i use the sunxi-fel.exe and command "sunxi-fel.exe version" give me that: AWUSBFEX soc=00001680(H3) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000 Next, I use "sunxi-fel.exe uboot u-boot-sunxi-with-spl.bin" with u-boot-sunxi-with-spl.bin from your repo, after somes try i got in console: starting -boot... but nothing append. I miss anything?