Jump to content

gleam2003

Members
  • Posts

    28
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I find that rsb is used in place if i2c. I have an old board and like old orengepi one plus and the new orangepi 3 lts they dosen't boot with rsb. I modify the DTS for use i2c and the board boot. I think that this rsb bus is buggy
  2. I'm working on it, sorry for delay. The patch work ok on 5.15. The uboot patch isn't needed. Today I will submit the patch
  3. Yes, i would first test if it work ok with 5.15. 5.10 work fine without change
  4. I patch the kernel 5.18 with the attached patch and it boot fine. The kernel patch switch to i2c like orangepi 3 lts. Probably it can work with 5.15 but not tested kernel-sunxi64-edge.patch u-boot-sunxi64-edge.patch
  5. I build legacy kernel 5.10.121 and system boot fine. Kernel 5.10.121 use i2c. I try to edit dtb and replace rsb wit i2c but system doesn't boot at all (on current kernel) I don't understand why orangepi 3 lts use i2c and we can't use the same with this board
  6. I compile linux in buildroot with all armbian patch (5.10, 5.15) and try with different uboot and atf and I have the same problem. Also I use the libreelec/lakka patch with buildroot and the board boot always without issue with linux kernel 5.10.109. (uboot+atf+crust)
  7. I can't test with other sd, I a have only 3 sdhc memory and all have same issue. I compile linux in buildroot with all armbian patch (5.10, 5.15) and try with different uboot and atf and I have the same problem. Also I use the libreelec/lakka patch with buildroot and the board boot always without issue with linux kernel 5.10.109. (uboot+atf+crust)
  8. I have similar problem with OrangePi One Plus and Armbian 22.02 First boot work ok, after resize and configure if reboot the image dosen't boot because can't mount root fs. If I use 21.05 all work fine. I can suppose it's like this: I have other board with H3 and H5 and the problem dosen't affect this models
  9. I use the patch and compile the image with the armbian. Compilation is ok. There isn't tve overlay to use, i don't know if it's necessary. I power on the board with the image builded and Image work and I can connect via SSH but no image output. I also test to add tve overlay to image, add tve to dts overlay Make file. I now have the dtbo tve file but adding it to overlay don't give me the solution, no image output. If I use old kernel (with fex) image output via CVBS works. UPDATE: add the patch for enable tve overlays kernel-sunxi-current.patch
  10. I can't make it working with orangepi zero and kernel 5.10.92, can anyone help me
  11. Can you share the solution. I have only white display
  12. Finaly build with no error with this deb: http://ftp.br.debian.org/debian/pool/main/q/qemu/qemu-user-static_5.1+dfsg-3_amd64.deb
  13. The error with qemu old version happen on both, native or virtual. The error after update qemu to 5.0 happen on vagrant, for now I don't test on native.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines