Hey all,
The DreamCatcher Board had an armbian image (Linux dreamcatcher 4.10.14-sunxi #21 SMP Sun May 7 22:37:19 UTC 2017 armv7l GNU/Linux) that worked fine, doing a apt upgrade completes, but prevents the system from booting... any insight to resolution is appreciated..
Currently were putting holds on the following for updates...
linux-dtb-next-sunxi
linux-headers-next-sunxi
linux-image-next-sunxi
linux-firmware-image-next-sunxi
error...
U-Boot SPL 2017.03-armbian (May 07 2017 - 22:36:09)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1
U-Boot 2017.03-armbian (May 07 2017 - 22:36:09 +0000) Allwinner Technology
CPU: Allwinner A13 (SUN5I)
Model: Outernet A13-dreamcatcher
I2C: ready
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial@01c28400
Out: serial@01c28400
Err: serial@01c28400
U-Boot 2017.03-armbian (May 07 2017 - 22:36:09 +0000) Allwinner Technology
CPU: Allwinner A13 (SUN5I)
Model: Outernet A13-dreamcatcher
I2C: ready
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial@01c28400
Out: serial@01c28400
Err: serial@01c28400
Net: No ethernet found.
Hit any key to stop autoboot: 0
38518 bytes read in 170 ms (220.7 KiB/s)
Unknown command 'bmp' - try 'help'
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3550 bytes read in 250 ms (13.7 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
128 bytes read in 214 ms (0 Bytes/s)
4308964 bytes read in 666 ms (6.2 MiB/s)
6264064 bytes read in 705 ms (8.5 MiB/s)
Found mainline kernel configuration
** File not found /boot/dtb/sun5i-a13-dreamcatcher.dtb **
** File not found /boot/dtb/overlay/-fixup.scr **
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4308900 Bytes = 4.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 49be4000, end 49ffffa4 ... OK
reserving fdt memory region: addr=43000000 size=6000
Loading Device Tree to 49bdb000, end 49be3fff ... OK
Starting kernel ...