ludwich

I have the problem that does not correct the update notice on my Opi + system. sudo apt update / upgrade I have already tried. How can I update the message? System: Orange Pi+ Armbian 5.36 Welcome to ARMBIAN 5.36 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i System load: 0.00 0.01 0.05 Up time: 16 min Memory usage: 6 % of 2014MB IP: 192.168.178.42 CPU temp: 39°C Usage of /: 24% of 15G [ 0 security updates available, 3 updates total: apt upgrade ] Last check: 2017-11-25 00:00 [ General system configuration (beta): armbian-config ] Last login: Sat Jan 13 11:55:33 2018 from 192.168.178.20 --> sudo apt clean does it !

I changed the value in h3disp manually to 432MHz (-m 33 -d). Now my Display DELL108FP (1280x1024 @60Hz) works well too. ludwich

Hi, is there a problem in ARMBIAN Ubuntu 16.04.1 LTS 3.4.113-sun8i with the blacklisting? id like to use a rtl_sdr (rtf_433) device, after a reboot there is a problem with dvb_usb_rtl2832u-modul. i do it disloid with modprobe -r dvb_usb_rtl2832u before starting rtl_433, then it runs well i found the model blacklisted in etc/modprobe.d/rtl-sdr-blacklist.conf but it is loaded new after a reboot? sorry for my broken english ludwich ludwich@orangepizero:~$ lsmod Module Size Used by pcf8591 3363 0 bmp085 3487 0 dvb_usb_rtl2832u 351091 0 dvb_usb 15734 1 dvb_usb_rtl2832u dvb_core 68509 1 dvb_usb rc_core 12727 1 dvb_usb xradio_wlan 210530 0 mac80211 358445 1 xradio_wlan

TKaiser made the great tool H3DISP to change the Display resolution by editing the bootscript: I have an Problem with an DVI-Display with native 1280x1024 pixel resolution. There is an horizontal scalling to 1280x720 (not identical with the native resolution) The next point, Igor reduced the initial resolution to to 720 using HDMI mode, but my Display dont work without the DVI flag. When i use the op on a HDMI-TV an change the screen to 720/DVI it work with "wrongcolors" - but can it see. Is it an idea to change the initial resolution to 720DVI? I hope that all people can see a something on screen an change then to there Real-Setting? The simplest "userfriendly" way is to ask the user in a smal dialog on first start. What can we do to made more Resolutions true? Wher are th limtations of the H3 SOCs? servus ludwich 480i use "-m 480i" or "-m 0" 576i use "-m 576i" or "-m 1" 480p use "-m 480p" or "-m 2" 576p use "-m 576p" or "-m 3" 720p50 use "-m 720p50" or "-m 4" 720p60 use "-m 720p60" or "-m 5" 1080i50 use "-m 1080i50" or "-m 6" 1080i60 use "-m 1080i60" or "-m 7" 1080p24 use "-m 1080p24" or "-m 8" 1080p50 use "-m 1080p50" or "-m 9" 1080p60 use "-m 1080p60" or "-m 10" (sorry table is damaged) Table of Displayresolutions, Formatname, Ratio and Pixelcount: VGA Super VGA 800 × 600 4∶3 4∶3 qHD, QHD Quarter HD 960 × 540 16∶9 16∶9 HXGA Half Megapixel (Apple) 832 × 624 4∶3 4∶3 1∶1 519.168 960 × 540 16∶9 16∶9 1∶1 518.400 964 × 544 ≈ 16:9 16∶9 1.003 524.416 WXGA Wide XGA 1024 × 576 16∶9 16∶9 1∶1 589.824 DVGA Double VGA 960 × 640 3∶2 3∶2 1∶1 614.400 WSVGA Wide SVGA 1024 × 600 ≈ 17:10 16∶9 1.041 614.400 WSVGA Wide SVGA 1072 × 600 ≈ 16:9 16∶9 0.995 643.200 960 × 720 4∶3 4∶3 1∶1 691.200 EVGA Extended VGA 1024 × 768 4∶3 4∶3 1∶1 786.432 XGA Extended Graphics Array 1024 × 768 4∶3 4∶3 1∶1 786.432 HD720, 720p High Definition, „HD ready“ 1280 × 720 16∶9 16∶9 1∶1 921.600 DSVGA Double SVGA 1200 × 800 3∶2 3∶2 1∶1 960.000 WXGA Wide XGA (Bright View) 1280 × 768 5∶3 5∶3 1∶1 983.040 XGA XGA+ 1152 × 864 4∶3 4∶3 1∶1 995.328 WXGA Wide XGA 1280 × 800 8∶5 8∶5 1∶1 1.024.000 WXGA Wide XGA 1360 × 768 ≈ 16:9 16∶9 1.003 1.044.480 WXGA Wide XGA 1366 × 768 ≈ 16:9 16∶9 0.999 1.049.088 WXGA Wide XGA 1376 × 768 ≈ 16:9 16∶9 0.992 1.056.768 OLPC One Laptop per Child 1200 × 900 4∶3 4∶3 1∶1 1.080.000 SXVGA Super Extended VGA 1280 × 960 4∶3 4∶3 1∶1 1.228.800 QVGA Quad VGA 1280 × 960 4∶3 4∶3 1∶1 1.228.800 UWXGA Ultra Wide XGA 1600 × 768 25:12 2.083 1∶1 1.228.800 WXGA+ WXGA Plus 1400 × 900 14∶9 14∶9 1∶1 1.260.000 WXGA+ WXGA Plus 1440 × 900 8∶5 8∶5 1∶1 1.296.000 SXGA Super XGA 1280 × 1024 5∶4 5∶4 1∶1 1.310.720 (Apple) 1440 × 960 3∶2 3∶2 1∶1 1.382.400 WSXGA Wide SXGA 1600 × 900 16∶9 16∶9 1∶1 1.440.000 SXGA+ SXGA Plus 1400 × 1050 4∶3 4∶3 1∶1 1.470.000 WSXGA Wide SXGA 1600 × 1024 25∶16 25∶16 1∶1 1.638.400 WSXGA+ Wide SXGA+ 1680 × 1050 8∶5 8∶5 1∶1 1.764.000 UXGA Ultra XGA 1600 × 1200 4∶3 4∶3 1∶1 1.920.000 HD1080, 1080p High Definition, „Full HD“ 1920 × 1080 16∶9 16∶9 50/60 OK WUXGA Wide UXGA 1920 × 1200 8∶5 8∶5 1∶1 2.304.000 QWXGA Quad WXGA 2048 × 1152 16∶9 16∶9 1∶1 2.359.296 TXGA Tesselar XGA 1920 × 1400 48:35 1.371 1∶1 2.688.000 1920 × 1440 4∶3 4∶3 1∶1 2.764.800 SUXGA Super UXGA 2048 × 1536 4∶3 4∶3 1∶1 3.145.728 QXGA Quad XGA 2048 × 1536 4∶3 4∶3 1∶1 3.145.728 UW-UXGA Ultra Wide - UXGA 2560 × 1080 21⅓:9 21∶9 1∶1 2.764.800 WQHD, 1440p Wide QHD (QHD) 2560 × 1440 16∶9 16∶9 1∶1 3.686.400 WQXGA Wide QXGA 2560 × 1600 8∶5 8∶5 1∶1 4.096.000 UWQHD, 1440p Ultra Wide QHD (QHD) 3440 × 1440 43:18 2.389 1∶1 4.953.600 QSXGA Quad SXGA 2560 × 2048 5∶4 5∶4 1∶1 5.242.880 QHD+ Quad High Definition Plus 3200 × 1800 16∶9 16∶9 1∶1 5.760.000 QSXGA+ Quad SXGA+ 2800 × 2100 4∶3 4∶3 1∶1 5.880.000 WQSXGA Wide QSXGA 3200 × 2048 25∶16 25∶16 1∶1 6.553.600 QUXGA Quad UXGA 3200 × 2400 4∶3 4∶3 1∶1 7.680.000 HSVGA Hex SVGA 3200 × 2400 4∶3 4∶3 1∶1 7.680.000 UHD, 2160p Ultra High Definition, „4K“ 3840 × 2160 16∶9 16∶9 1∶1 8.294.400 Here is great overviewpicture about Displayresolutions: https://en.wikipedia.org/wiki/Display_resolution#/media/File:Vector_Video_Standards8.svg

Here my HW-List output, Device: OrangePiPlus2, Realtek 8189ETV SDIO Chip It works with the Loboris Debian Mate Image I see there is a other driverversion #17 root@OrangePI:~# lshw -C network *-network:0 Beschreibung: Kabellose Verbindung Physische ID: 6 Logischer Name: wlan1 Seriennummer: 5a:63:56:cc:c1:e8 Fähigkeiten: ethernet physical wireless Konfiguration: broadcast=yes driver=rtl8189es driverversion=3.4.39-01-lobo firmware=N/A ip=192.168.178.44 link=yes multicast=yes wireless=IEEE 802.11bgn *-network:1 Beschreibung: Ethernet interface Physische ID: 7 Logischer Name: eth0 Seriennummer: d2:d8:4b:1a:f7:7a Größe: 10Mbit/s Kapazität: 1Gbit/s Fähigkeiten: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=sunxi_geth driverversion=SUNXI Gbgit driver V1.1 duplex=half link=no multicast=yes port=MII speed=10Mbit/s Please ask if i can help :-) ludwich

Hi i am a user of a OrangePiPlus2 too. I tried different images, but iam a beginner. i had different problems with monitor size or a notworking wlan but I used the onboard wlan (sdio: rtl8189etv) on the ubuntu vivid mate image from loboris without problems. (Kernel 3.4.39-01-lobo, MATE 1.8.2) if i can help to fix the problem with armbian please ask. what kind of parameters do you need? ludwich