Jump to content

Armbian for Amlogic S805 and S802/S812


masteripper

Recommended Posts

1 hour ago, balbes150 said:

Try to set configuration file /boot/hdmi.sh  or /boot/amlogics905x_init.sh  value instead "mode=720p"   to  "mode=1080i59Hz"

not working(((

Link to comment
Share on other sites

7 hours ago, balbes150 said:

You need to compare what is written in the normal dtb and put it in the new to check.

sorry but your meson8m2_n200_2gb.dtb hasnt any led infos. i search google for android and other m8s dtb/dts but also no led infos inside this files .  i found only this info about led config

https://lists.freebsd.org/pipermail/freebsd-arm/2015-February/010126.html

there is a info about gpio ao 13 , how i write this to the dts ( is red right or blue ?) or maybe complet wrong. Maybe LED dont control by GPIO only by power state ?

 

        red_led_gpio = "GPIOAO_13";
        blue_led_gpio = <0x13>;  (or 0xc8100024 )

Link to comment
Share on other sites

Uploaded the new version of the initialization script monitor (hdmi.sh) with support of resolution 1080. To use simply replace the script in the image to a new version. Please try in both modes (720 and 1080). For use on older images you need to rename amlogics905x_init.sh or change the call line in /etc/rc.local .

 

https://yadi.sk/d/L-F3RlhX3JYtif

Link to comment
Share on other sites

18 hours ago, balbes150 said:

Uploaded the new version of the initialization script monitor (hdmi.sh) with support of resolution 1080. To use simply replace the script in the image to a new version. Please try in both modes (720 and 1080). For use on older images you need to rename amlogics905x_init.sh or change the call line in /etc/rc.local .

 

https://yadi.sk/d/L-F3RlhX3JYtif

Does not work(((  "Armbian_5.27_S812_Ubuntu_xenial_3.10.99_server_20170526"

armbian31099.log

 

 

And "Armbian_5.24_Vegas812_Ubuntu_xenial_3.10.99_desktop_20170113" works !

_armbian31099.log

 

 

Link to comment
Share on other sites

Spoiler

Если знаком с утилитой dtc , распакуй этот dtb и пробуй сравить параеметры из meson8m2_n200_2G и постепенно подбирать, а потом упаковать.

 

Link to comment
Share on other sites

Spoiler

распаковал но что там менять, и главное на что((((

Почему в январском образе прекрасно работало с моим дтб? Только с сетью проблемы и сервис хостнаме не подгружались.

 

PS.

Решил с разрешением, заменил hdmi.sh на старый vegas805_init.sh и все заработало!!!!

СПАСИБО ЗА ВАШЕ ВНИМАНИЕ И ПОМОЩЬ!!!!!!

 

Осталось несколько ошибок.

1. Failed to start Hostname service.

2. Failed to start Network Manager Wain online

 

и что за ошибка "

[   50.294613@0] CONFIG-ERROR) dhd_conf_set_mimo_bw_cap: mimo_bw_cap setting failed -23

 

"

 

 

Link to comment
Share on other sites

1 hour ago, wzor said:

1. Failed to start Hostname service.

If linux-vegas812-default.config is the kernel config for this board/SoC, then it's missing CONFIG_NAMESPACES (and all namespaces inside the submenu) and some CONFIG_CGROUP_* options which may prevent some services from starting.

Link to comment
Share on other sites

15 hours ago, zador.blood.stained said:

then it's missing CONFIG_NAMESPACES (and all namespaces inside the submenu)

Adding this option to the config, causes a build error in the kernel.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines