• Before reporting problems with your board running Armbian, check the following:

    • 1. Check power supply, check SD card and check other people experiences   06/23/17

      Power supply issues are one of the three biggest issues you'll face when starting with Single Board Computers (SBCs). SD card issues, whether fake or faulty, are another and issues resulting from poor board design is the other common issues you can encounter.   Power supply issues can be tricky. You might have a noisy power supply that works with one board because it has extra filtering, but won't work with another. Or you're using that cheap phone charger because your board has a microUSB connector, and it is either erratic, or doesn't start up, or even becomes the cause of some SD card issues.    Some tips to avoid the most common causes of problems reported:   Don't power via micro USB  - unless you have optimised your setup for low power requirements. Micro USB is great for mobile phones because they are simply charging a battery. It's bad for SBCs. Yes, it does work for a lot of people, but it also causes more problems and headaches over time than it is worth, unless you know exactly what you are doing. If you have a barrel jack power connector on your SBC, use it instead! If there is an option for powering via header connections, use that option!
        Don't use mobile phone chargers. They might be convenient and cheap, but this is because they are meant for charging phones, not powering your SBC which has particular power requirements.
        When you are evaluating a power supply, make sure you run some stress tests on your system to ensure that it will not cause issues down the path.   (Micro) SD card issues can be sneaky. They might appear right at the start causing strange boot and login errors, or they might cause problems over time. It is best to run a test on any new SD card you use, to ensure that it really is what it is, and to ensure that isn't faulty. Armbian provides you a simple way to do this   --   armbianmonitor -c /path/to/device/to/test  
    • 2. Make sure to collect and provide all necessary information   06/24/17

      We can only help if you provide quality information for us to work with. All stable images from the download section are tested, most stable upgrades are tested and we have tens of thousands of users. Even with regular and extensive testings, bugs sometimes do slip through. This is a voluntary support service and is unrelated to board makers, and is not obligated to provide you any answers. Repeated asking the same questions because you're not happy with the answers will result in you being ignored.

      Before you post a question, use the forum search as someone else might have already had the same problem and resolved it. And make sure you've read the Armbian documentation. If you still haven't found an answer, make sure you include the following in your post:   1. Logs when you can boot the board: armbianmonitor -u (paste URL to your forum post)   2. If your board does not boot, provide a log from serial console or at least make a picture, where it stops.   3. Describe the problem the best you can and provide all necessary info that we can reproduce the problem. We are not clairvoyant or mind readers. Please describe your setup as best as possible so we know what your operating environment is like.     We will not help in cases you are not using stable official Armbian builds, you have a problem with 3rd party hardware or reported problem would not be able to reproduced.

read first Browsers with support HTML 5 in Armbian
2 2

5 posts in this topic

Recommended Posts

Hi guys,

I am using Armbian 5.23 Jessie Desktop version with retrorange pi, in my orange pi pc, using the firefox on youtube i can watch videos in 480p more than it the video is bad doesnt run good, i can't watch netflix because the version firefox esr 45 don't have support to html 5, and to use facebook have a delay to load the pages, i think the firefix version default of armbian aren't so good, i tryed update the firefox but i didn't found none  tutorial for it, so someone knows how i update the firefox or install the other version with support to html 5? or someone knows how a install Chromium?

Is normal the videos of 720 don't run good ?

Thanks.

Share this post


Link to post
Share on other sites
Just now, Thiago Morais said:

Is normal the videos of 720 don't run good ?

 

Unfortunately there is no HW acceleration within any browser.

manuti likes this

Share this post


Link to post
Share on other sites

Thiago have you tried 4K Video Downloader? At least it can download YouTube videos at the resolution you prefer. I got used to using it with a ThinClient with no hardware acceleration running Mint a year ago and it's been indispensable since then. 

But disclaimer: I don't have my Beelink/Armbians setup too well yet and am working on the Android part that works first. And wise man once advised me: no internet connection for Android lol

Share this post


Link to post
Share on other sites

There are many ways to watch accelerated youtoube videos on stock Armbian legacy install. Just not within a browser.

 

youtube-dl, mpv, ...

You don't need any windows based download tool. 

https://forum.armbian.com/index.php?/topic/499-bananapipro-video-accelerated-no-work/&page=2#comment-28237


It's to avoid Android on those boards since it's crappy and unsupported. Luckily we have a well maintained Openelec fork if you seek multimedia OS.

manuti and JoeyBeelinkX2 like this

Share this post


Link to post
Share on other sites

I met the similar YouTube play error like you before. I can watch YouTube in 480P or 360P, but when I change it to 720P or the higher resolution, it gives me a green screen. Finally, it was solved by removing the Ad-Block. So share with you and hope this may be helpful in fixing your YouTube problem. Good luck.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

2 2

  • Support the project

    We need your help to stay focused on the project.

    Choose the amount and currency you would like to donate in below.