Jump to content

Another TV out questions.


Armnlegs

Recommended Posts

So I saw many thread with this question.  Of course there are also good answers but I just don't understand.

Out of the box HDMI works(hdmi2hdmi). Hdmi2dvi=doesn't work.

Analog AV=doesn't work. I'm supposed to disable the hdmi and enable av-out by script.bin with something like [disp_init]

 

My question is where is this file located?

Am I suppose to vi create it?

Hopefully someone could provide step by step or point me to the right direction with detailed information.

Link to comment
Share on other sites

Thank you for reply.

So I would need to 

1. apt-get install libusb-1.0-0-dev

2.  ./sunxi-fexc [-vq] [-I <bin>] [-O <fex>] [<script> [<script>]]

3. Edit

4. ./sunxi-fexc [-vq] [-I <fex>] [-O <bin>] [<script> [<script>]]

 

Do i need to save it first? I thought i read somewhere it will save as .bak.

Link to comment
Share on other sites

Correct me if i'm wrong I will need to change what's in red? What else might I need to change?

Not sure if I should added on here but HDMI2DVI not working either(tested 2 new cables).  Since i'm changing this, what if I want to use HDMI2DVI(monitor)

 

[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 5
screen1_output_type = 3
screen1_output_mode = 5
fb0_format = 0
fb0_width = 0
fb0_height = 0
fb1_format = 0
fb1_width = 0
fb1_height = 0

 

 

[hdmi_para]
hdmi_used = 1 change to 0
hdmi_power = "vcc-hdmi-18"

 

 

[tv_para]
tv_used = 0 change to 1
tv_dac_used = 1
tv_dac_src0 = 0

Link to comment
Share on other sites

So change the 2 parameter below in red did not work.
Check the cable with portable dvd and they are good.
Tried singly(Red White Yellow) one by one into Video, none of them works.
Has to be more to change below.
 
[boot_disp]
advert_disp = 0
auto_hpd = 1
output_type = 4
hdmi_channel = 0
hdmi_mode = 4
cvbs_channel = 1
cvbs_mode = 11
output_full = 1
hdmi_mode_check = 1
 
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 5
screen1_output_type = 3
screen1_output_mode = 5
fb0_format = 0
fb0_width = 0
fb0_height = 0
fb1_format = 0
fb1_width = 0
fb1_height = 0
 
[hdmi_para]
hdmi_used = 0 change from 1
hdmi_power = "vcc-hdmi-18"
 
[tv_para]
tv_used = 1 change from 0
tv_dac_used = 1
tv_dac_src0 = 0
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines