rharci Posted April 24, 2017 Share Posted April 24, 2017 need some help the eth0 does not start in orane pi pc plus with armbian. The eth0 works well with android image.The wifi works well with the armbian. I tried the update using uImage_OPI-PLUS and uImage_OPI-PC but this did not help. This problem has been mentioned several times but I could not find a simple solution to it. Please any help. Link to comment Share on other sites More sharing options...
Igor Posted April 24, 2017 Share Posted April 24, 2017 Which image you are trying to use? Can you supply some logs? Link to comment Share on other sites More sharing options...
rharci Posted April 25, 2017 Author Share Posted April 25, 2017 I am using the image found in the orange pi website. Armbian_5.25_Orangepiplus_Ubuntu_xenial_default_3.4.113_desktop on static it give me a bcast with : 255 at the end instead of the value I setpi@orangepiplus:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr ******** inet addr:***** Bcast:******255 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 Interrupt:114 pi@orangepiplus:~$ sudo ifup eth0 RTNETLINK answers: File exists Failed to bring up eth0. pi@orangepiplus:~$ sudo ifdown eth0 ifdown: interface eth0 not configured in hdcp mode pi@orangepiplus:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr ********* BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 Interrupt:114 and pi@orangepiplus:~$ sudo ifup eth0 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0xb2e49719) send_packet: No such device or address dhclient.c:2098: Failed to send 300 byte long packet over eth0 interface. receive_packet failed on eth0: Network is down Link to comment Share on other sites More sharing options...
tkaiser Posted April 25, 2017 Share Posted April 25, 2017 16 minutes ago, rharci said: Armbian_5.25_Orangepiplus_Ubuntu_xenial_default_3.4.113_desktop This is for Orange Pi Plus and Plus 2 (Gigabit Ethernet, external Ethernet PHY accessed through RGMII) while you have an Orange Pi PC Plus (Fast Ethernet, internal PHY). Better use the appropriate OS image for this board: https://www.armbian.com/orange-pi-pc-plus/ Link to comment Share on other sites More sharing options...
rharci Posted April 25, 2017 Author Share Posted April 25, 2017 thanksI will try it Link to comment Share on other sites More sharing options...
Recommended Posts