Sterium Posted July 23, 2017 Share Posted July 23, 2017 Hello, i have a problem whit usb wifi dongle rtl8192cu, from latest armbian desktop in network manager show the essid network but it's impossible connection! board: Orangepipc Spoiler [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@devel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #16 SMP PREEMPT Tue Jun 13 14:15:57 CEST 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun8i [ 0.000000] cma: CMA: reserved 256 MiB at 50000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c098d5c0, node_mem_map c0ac6000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192850 pages, LIFO batch:31 [ 0.000000] HighMem zone: 594 pages used for memmap [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15 [ 0.000000] script_init enter! [ 0.000000] script_init exit! [ 0.000000] PERCPU: Embedded 8 pages/cpu @c13dc000 s11968 r8192 d12608 u32768 [ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: root=UUID=08833519-b742-4494-a900-22da45d06026 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=e27f69c7-01 ubootsource=mmc cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1024MB = 1024MB total [ 0.000000] Memory: 757312k/757312k available, 291264k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08ce730 (8986 kB) [ 0.000000] .init : 0xc08cf000 - 0xc0921ec0 ( 332 kB) [ 0.000000] .data : 0xc0922000 - 0xc0991e30 ( 448 kB) [ 0.000000] .bss : 0xc09925e4 - 0xc0ac5a00 (1230 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000265] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.000289] pid_max: default: 32768 minimum: 301 [ 0.000454] Security Framework initialized [ 0.000478] AppArmor: AppArmor disabled by boot time parameter [ 0.000666] Mount-cache hash table entries: 512 [ 0.001656] Initializing cgroup subsys cpuacct [ 0.001673] Initializing cgroup subsys memory [ 0.001718] Initializing cgroup subsys devices [ 0.001731] Initializing cgroup subsys freezer [ 0.001744] Initializing cgroup subsys blkio [ 0.001768] Initializing cgroup subsys perf_event [ 0.001853] CPU: Testing write buffer coherency: ok [ 0.001895] ftrace: allocating 24815 entries in 73 pages [ 0.030313] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.030330] [sunxi_smp_prepare_cpus] enter [ 0.030367] Setting up static identity map for 0x4061df18 - 0x4061df70 [ 0.031329] CPU1: Booted secondary processor [ 0.031329] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031460] CPU2: Booted secondary processor [ 0.031460] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.040504] CPU3: Booted secondary processor [ 0.040504] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.040624] Brought up 4 CPUs [ 0.040624] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.040920] devtmpfs: initialized [ 0.051791] wakeup src cnt is : 2. [ 0.051803] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.051814] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0 [ 0.051825] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.051836] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.051847] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8 [ 0.051857] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.051869] sunxi pm init [ 0.052014] pinctrl core: initialized pinctrl subsystem [ 0.062190] NET: Registered protocol family 16 [ 0.063120] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.063120] script_sysfs_init success [ 0.063120] sunxi_dump_init success [ 0.063120] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.063120] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.063120] plat: add bmp085 device [ 0.063120] plat: add pcf8591 device [ 0.063120] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.063120] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.063120] script config pll_video to 297 Mhz [ 0.063120] script config pll_de to 864 Mhz [ 0.063120] script config pll_ve to 402 Mhz [ 0.063120] sunxi_default_clk_init [ 0.063120] try to set pll6ahb1 to 200000000 [ 0.063120] try to set ahb clk source to pll6ahb1 [ 0.063120] set ahb clk source to pll6ahb1 [ 0.063120] try to set ahb1 to 200000000 [ 0.063120] try to set apb1 to 100000000 [ 0.070242] bio: create slab <bio-0> at 0 [ 0.070313] [ARISC] :sunxi-arisc driver v1.04 [ 0.091549] [ARISC] :arisc version: [v0.1.58] [ 0.181507] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.183122] SCSI subsystem initialized [ 0.183122] usbcore: registered new interface driver usbfs [ 0.183122] usbcore: registered new interface driver hub [ 0.183122] usbcore: registered new device driver usb [ 0.183122] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.183122] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.183122] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.183122] Linux video capture interface: v2.00 [ 0.183122] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.183122] cfg80211: Calling CRDA to update world regulatory domain [ 0.183122] NetLabel: Initializing [ 0.183122] NetLabel: domain hash size = 128 [ 0.183122] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.183122] NetLabel: unlabeled traffic allowed by default [ 0.183122] Switching to clocksource arch_sys_counter [ 0.193510] FS-Cache: Loaded [ 0.193810] CacheFiles: Loaded [ 0.205197] NET: Registered protocol family 2 [ 0.216423] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.217033] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.218797] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.219851] TCP: Hash tables configured (established 131072 bind 65536) [ 0.219863] TCP: reno registered [ 0.219876] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.219914] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.220308] NET: Registered protocol family 1 [ 0.220736] RPC: Registered named UNIX socket transport module. [ 0.220749] RPC: Registered udp transport module. [ 0.220757] RPC: Registered tcp transport module. [ 0.220766] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.220976] Trying to unpack rootfs image as initramfs... [ 0.555869] Freeing initrd memory: 5040K [ 0.556373] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 0.556503] sunxi_reg_init enter [ 0.557443] audit: initializing netlink socket (disabled) [ 0.557500] type=2000 audit(0.550:1): initialized [ 0.558751] highmem bounce pool size: 64 pages [ 0.559123] VFS: Disk quotas dquot_6.5.2 [ 0.559313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.559875] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.560106] misc fatfs initialized [ 0.560322] NFS: Registering the id_resolver key type [ 0.560746] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.560761] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.561540] NTFS driver 2.1.30 [Flags: R/W]. [ 0.561851] fuse init (API version 7.18) [ 0.562272] msgmni has been set to 1472 [ 0.563744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.563762] io scheduler noop registered [ 0.563771] io scheduler deadline registered [ 0.563835] io scheduler cfq registered (default) [ 0.564242] [DISP]disp_module_init [ 0.564549] cmdline,init_disp= [ 0.564581] cmdline,disp= [ 0.580303] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! [ 0.616179] Console: switching to colour frame buffer device 240x67 [ 0.652923] [DISP]disp_module_init finish [ 0.653159] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 0.653481] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 0.653494] sw_uart_pm()890 - uart0 clk is already enable [ 0.653513] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 0.653654] console [ttyS0] enabled [ 0.654209] sunxi_cmatest_init enter [ 0.654248] sunxi_cmatest_init success [ 0.658387] brd: module loaded [ 0.662400] loop: module loaded [ 0.662703] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 0.662718] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 0.663302] spi spi0: master is unqueued, this is deprecated [ 0.664390] PPP generic driver version 2.4.2 [ 0.664588] PPP BSD Compression module registered [ 0.664599] PPP Deflate Compression module registered [ 0.667478] PPP MPPE Compression module registered [ 0.667496] NET: Registered protocol family 24 [ 0.667576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.687689] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.687726] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 0.688329] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 0.700047] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 0.700738] hub 1-0:1.0: USB hub found [ 0.700763] hub 1-0:1.0: 1 port detected [ 0.721139] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.721167] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 0.721605] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 0.740034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 0.740579] hub 2-0:1.0: USB hub found [ 0.740602] hub 2-0:1.0: 1 port detected [ 0.760965] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.760992] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 0.761393] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 0.780031] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 0.780046] ehci_irq: highspeed device connect [ 0.780548] hub 3-0:1.0: USB hub found [ 0.780573] hub 3-0:1.0: 1 port detected [ 0.800935] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.800964] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 0.801349] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 0.820028] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 0.820042] ehci_irq: highspeed device connect [ 0.820589] hub 4-0:1.0: USB hub found [ 0.820609] hub 4-0:1.0: 1 port detected [ 0.820984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.841066] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.841095] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 0.841128] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 0.904554] hub 5-0:1.0: USB hub found [ 0.904575] hub 5-0:1.0: 1 port detected [ 0.924948] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 0.924976] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 0.925007] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 0.984605] hub 6-0:1.0: USB hub found [ 0.984625] hub 6-0:1.0: 1 port detected [ 1.005037] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.005066] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 1.005109] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 1.064605] hub 7-0:1.0: USB hub found [ 1.064625] hub 7-0:1.0: 1 port detected [ 1.085061] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.085089] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 1.085121] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 1.100039] usb 3-1: new high-speed USB device number 2 using sunxi-ehci [ 1.144530] hub 8-0:1.0: USB hub found [ 1.144550] hub 8-0:1.0: 1 port detected [ 1.144893] Initializing USB Mass Storage driver... [ 1.145127] usbcore: registered new interface driver usb-storage [ 1.145138] USB Mass Storage support registered. [ 1.145199] usbcore: registered new interface driver ums-alauda [ 1.145247] usbcore: registered new interface driver ums-cypress [ 1.145299] usbcore: registered new interface driver ums-datafab [ 1.145345] usbcore: registered new interface driver ums_eneub6250 [ 1.145391] usbcore: registered new interface driver ums-freecom [ 1.145447] usbcore: registered new interface driver ums-isd200 [ 1.145493] usbcore: registered new interface driver ums-jumpshot [ 1.145539] usbcore: registered new interface driver ums-karma [ 1.145588] usbcore: registered new interface driver ums-onetouch [ 1.145649] usbcore: registered new interface driver ums-realtek [ 1.145700] usbcore: registered new interface driver ums-sddr09 [ 1.145748] usbcore: registered new interface driver ums-sddr55 [ 1.145796] usbcore: registered new interface driver ums-usbat [ 1.146006] uinput result 0 , vmouse_init [ 1.146631] mousedev: PS/2 mouse device common for all mice [ 1.146847] sunxikbd_init failed. [ 1.147613] ls_fetch_sysconfig_para: type err device_used = -1073057456. [ 1.147623] =========script_get_err============ [ 1.147632] ltr_init: ls_fetch_sysconfig_para err. [ 1.148203] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 1.148252] i2c /dev entries driver [ 1.148653] sunxi cedar version 0.1 [ 1.148694] [cedar]: install start!!! [ 1.148898] [cedar]: install end!!! [ 1.149142] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.149313] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.149483] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.149651] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.149820] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.149989] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.150184] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.150351] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.150516] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.150713] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.150904] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.151096] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.151287] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.151479] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.151670] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.151861] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.152052] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.152244] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.152258] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 1.152421] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 1.152575] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 1.152588] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 1.152599] timeout_to_interv, line 167 [ 1.152607] interv_to_timeout, line 189 [ 1.152617] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 1.153040] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.153269] calibrat: max_cpufreq 1200Mhz Type 0! [ 1.153592] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Jun 13 2017 at 14:14:41 [ 1.153625] [mmc]: get mmc0's sdc_power is null! [ 1.153654] [mmc]: get mmc1's sdc_power is null! [ 1.153664] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.153673] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.153689] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 [ 1.157285] [mmc]: sdc0 power_supply is null [ 1.159142] no blue_led, ignore it! [ 1.159377] Registered led device: red_led [ 1.159490] Registered led device: green_led [ 1.159504] no led_0, ignore it! [ 1.159512] no led_1, ignore it! [ 1.159519] no led_2, ignore it! [ 1.159526] no led_3, ignore it! [ 1.159533] no led_4, ignore it! [ 1.159540] no led_5, ignore it! [ 1.159547] no led_6, ignore it! [ 1.159554] no led_7, ignore it! [ 1.160476] usbcore: registered new interface driver usbhid [ 1.160488] usbhid: USB HID core driver [ 1.164633] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.165694] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.165890] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.165904] [DAUDIO0] driver not init,just return. [ 1.169005] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 1.170330] oprofile: using arm/armv7-ca7 [ 1.170537] u32 classifier [ 1.170545] Performance counters on [ 1.170552] input device check on [ 1.170559] Actions configured [ 1.170877] TCP: bic registered [ 1.170887] TCP: cubic registered [ 1.170895] TCP: westwood registered [ 1.170903] TCP: highspeed registered [ 1.170911] TCP: hybla registered [ 1.170918] TCP: htcp registered [ 1.170926] TCP: vegas registered [ 1.170933] TCP: veno registered [ 1.170941] TCP: scalable registered [ 1.170948] TCP: lp registered [ 1.170955] TCP: yeah registered [ 1.170963] TCP: illinois registered [ 1.170970] Initializing XFRM netlink socket [ 1.171193] NET: Registered protocol family 10 [ 1.172299] NET: Registered protocol family 17 [ 1.172331] NET: Registered protocol family 15 [ 1.172378] Registering the dns_resolver key type [ 1.172824] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 1.172848] ThumbEE CPU extension supported. [ 1.172871] Registering SWP/SWPB emulation handler [ 1.173451] registered taskstats version 1 [ 1.173904] cmdline,disp= [ 1.174206] [HDMI] power vcc-hdmi-18 [ 1.205277] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.206508] CPU Budget:corekeeper enabled [ 1.206734] CPU Budget:Register notifier [ 1.206746] CPU Budget:register Success [ 1.206760] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 1.210153] [rf_pm]: module power0 name vcc-wifi-33 [ 1.210169] [rf_pm]: Did not config module_power1 in sys_config [ 1.210180] [rf_pm]: Did not config module_power2 in sys_config [ 1.210190] [rf_pm]: Did not config module_power3 in sys_config [ 1.210200] [rf_pm]: mod has no chip_en gpio [ 1.210208] [rf_pm]: failed to fetch lpo_use_apclk [ 1.210216] [rf_pm]: regulator on. [ 1.210226] [wifi_pm]: no wifi used in configuration [ 1.210237] [rfkill]: init no bt used in configuration [ 1.210245] ALSA device list: [ 1.210252] #0: audiocodec [ 1.210259] #1: sndhdmi [ 1.211231] Freeing init memory: 328K [ 1.223384] mmc0: new SDHC card at address 0001 [ 1.224001] mmcblk0: mmc0:0001 TO 29.1 GiB [ 1.226280] mmcblk0: p1 [ 1.226952] mmcblk mmc0:0001: Card claimed for testing. [ 1.226974] mmc0:0001: TO 29.1 GiB [ 1.251772] hub 3-1:1.0: USB hub found [ 1.251939] hub 3-1:1.0: 4 ports detected [ 1.370085] usb 4-1: new high-speed USB device number 2 using sunxi-ehci [ 1.521068] vmouse_input_dev_open [ 1.600088] usb 3-1.1: new low-speed USB device number 3 using sunxi-ehci [ 1.600136] vmouse_input_dev_close [ 1.724951] generic-usb 0003:046E:55A5.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-sunxi-ehci-1.1/input0 [ 1.735374] generic-usb 0003:046E:55A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-sunxi-ehci-1.1/input1 [ 1.810065] usb 3-1.3: new low-speed USB device number 4 using sunxi-ehci [ 1.810078] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=10 [ 1.933237] generic-usb 0003:046D:C51B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-sunxi-ehci-1.3/input0 [ 1.936475] generic-usb 0003:046D:C51B.0004: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-sunxi-ehci-1.3/input1 [ 2.003154] Btrfs loaded [ 2.010126] usb 3-1.4: new high-speed USB device number 5 using sunxi-ehci [ 2.121736] hub 3-1.4:1.0: USB hub found [ 2.122212] hub 3-1.4:1.0: 2 ports detected [ 2.505037] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 3.302355] systemd[1]: System time before build time, advancing clock. [ 3.820298] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.820643] systemd[1]: Detected architecture arm. [ 3.851857] systemd[1]: Set hostname to <orangepipc>. [ 4.512801] systemd[1]: Reached target Remote File Systems (Pre). [ 4.530467] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.550221] systemd[1]: Reached target User and Group Name Lookups. [ 4.570159] systemd[1]: Reached target Encrypted Volumes. [ 4.590623] systemd[1]: Created slice User and Session Slice. [ 4.610435] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.630170] systemd[1]: Reached target Remote File Systems. [ 4.650847] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.670535] systemd[1]: Created slice System Slice. [ 4.690200] systemd[1]: Reached target Slices. [ 4.710609] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.730526] systemd[1]: Listening on Journal Audit Socket. [ 4.750425] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 4.770337] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.790273] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.810316] systemd[1]: Listening on Journal Socket. [ 4.910616] systemd[1]: Starting Restore / save the current clock... [ 5.080778] systemd[1]: Starting Load Kernel Modules... [ 5.210951] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.323818] [mmc]: sdc1 power_supply is null [ 5.375190] [mmc]: sdc1 power_supply is null [ 5.379297] [mmc]: sdc1 power_supply is null [ 5.390430] systemd[1]: Mounting Debug File System... [ 5.422273] [wifi_pm]: set wl_reg_on 1 ! [ 5.437042] UMP: UMP device driver loaded [ 5.438731] [mmc]: sdc1 power_supply is null [ 5.442674] [mmc]: sdc1 power_supply is null [ 5.465434] mali clk: 252 MHz [ 5.465664] mali clk: 252 MHz [ 5.467664] Mali: Mali device driver loaded [ 5.505318] [mmc]: sdc1 power_supply is null [ 5.509429] [mmc]: sdc1 power_supply is null [ 5.520779] systemd[1]: Starting Set console keymap... [ 5.582050] [mmc]: sdc1 power_supply is null [ 5.730466] systemd[1]: Mounting POSIX Message Queue File System... [ 5.750660] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.770312] systemd[1]: Reached target Paths. [ 5.880526] systemd[1]: Starting Nameserver information manager... [ 5.900468] systemd[1]: Listening on Syslog Socket. [ 6.080691] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.100496] systemd[1]: Listening on udev Control Socket. [ 6.120401] systemd[1]: Listening on udev Kernel Socket. [ 6.208335] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.293464] systemd[1]: Mounted Debug File System. [ 6.310316] systemd[1]: Mounted POSIX Message Queue File System. [ 6.480134] systemd[1]: Started Restore / save the current clock. [ 6.620157] systemd[1]: Started Load Kernel Modules. [ 6.770131] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.910138] systemd[1]: Started Set console keymap. [ 7.440197] systemd[1]: Started Remount Root and Kernel File Systems. [ 7.620772] systemd[1]: Started Nameserver information manager. [ 7.684449] systemd[1]: Time has been changed [ 8.007975] systemd[1]: Reached target Network (Pre). [ 8.080741] systemd[1]: Starting Load/Save Random Seed... [ 8.220816] systemd[1]: Starting udev Coldplug all Devices... [ 8.370528] systemd[1]: Activating swap /var/swap... [ 8.490799] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.502754] Adding 131068k swap on /var/swap. Priority:-1 extents:1 across:131068k SS [ 8.600421] systemd[1]: Mounting FUSE Control File System... [ 8.710677] systemd[1]: Starting Apply Kernel Variables... [ 8.737726] systemd[1]: Activated swap /var/swap. [ 8.753910] systemd[1]: Mounted FUSE Control File System. [ 9.020160] systemd[1]: Started Load/Save Random Seed. [ 9.310331] systemd[1]: Started Create Static Device Nodes in /dev. [ 9.470157] systemd[1]: Started Apply Kernel Variables. [ 9.610134] systemd[1]: Started udev Coldplug all Devices. [ 9.666314] systemd[1]: Reached target Local File Systems (Pre). [ 9.790388] systemd[1]: Mounting /tmp... [ 9.940776] systemd[1]: Starting udev Kernel Device Manager... [ 9.960225] systemd[1]: Reached target Swap. [ 10.035552] systemd[1]: Mounted /tmp. [ 10.170780] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.190811] systemd[1]: Reached target Local File Systems. [ 10.300772] systemd[1]: Starting Set console font and keymap... [ 10.480661] systemd[1]: Starting Raise network interfaces... [ 10.525270] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 10.525313] bmp085: probe of 0-0077 failed with error -70 [ 10.546033] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 10.546250] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 10.570890] systemd[1]: Starting Armbian enhanced Log2Ram... [ 10.620856] systemd[1]: Started udev Kernel Device Manager. [ 10.643852] vmouse_input_dev_open [ 10.720159] vmouse_input_dev_close [ 11.149952] systemd[1]: Found device /dev/ttyS0. [ 11.286690] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 11.303263] rtl8192cu: Chip version 0x11 [ 11.310606] systemd[1]: Reached target Sound Card. [ 11.406659] rtl8192cu: MAC address: 30:b5:c2:12:ac:59 [ 11.406684] rtl8192cu: Board Type 0 [ 11.406896] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 11.407029] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin [ 11.407566] usbcore: registered new interface driver rtl8192cu [ 11.440860] systemd[1]: Started ifup for eth0. [ 11.587659] Error: Driver 'rtl8192cu' is already registered, aborting... [ 11.620385] systemd[1]: Started Set console font and keymap. [ 11.642502] systemd[1]: Found device /sys/subsystem/net/devices/eth0. [ 11.661206] systemd[1]: Created slice system-getty.slice. [ 11.770161] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 11.777200] rtlwifi: wireless switch is on [ 11.871036] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.060285] systemd[1]: Started Armbian enhanced Log2Ram. [ 12.161092] systemd[1]: Starting Journal Service... [ 12.232894] systemd[1]: Started Load/Save RF Kill Switch Status. [ 12.300483] systemd[1]: Started Journal Service. [ 12.368442] gmac0: probed [ 12.368793] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) [ 12.530793] systemd-journald[460]: Received request to flush runtime journal from PID 1 [ 15.360287] PHY: gmac0-0:00 - Link is Up - 100/Full [ 21.169259] rtl8192cu: MAC auto ON okay! [ 21.201949] rtl8192cu: Tx queue select: 0x05 [ 21.621366] ADDRCONF(NETDEV_UP): wlx30b5c212ac59: link is not ready [ 22.400666] [DISP] disp_ioctl,line:1584:para err in disp_ioctl, cmd = 0x0,screen id = 65536 [ 22.639514] [drm] Initialized drm 1.1.0 20060810 [ 22.667294] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 22.669836] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 22.670558] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 22.677620] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1 [ 25.385660] vmouse_input_dev_open [ 61.946358] Error: Driver 'rtl8192cu' is already registered, aborting... [ 73.558023] Error: Driver 'rtl8192cu' is already registered, aborting... stefano@orangepipc:~$ lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub Bus 003 Device 004: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks Bus 003 Device 003: ID 046e:55a5 Behavior Tech. Computer Corp. Bus 003 Device 002: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Link to comment Share on other sites More sharing options...
Cologne86 Posted July 23, 2017 Share Posted July 23, 2017 Hello , did you try this: https://docs.armbian.com/User-Guide_Advanced-Features/#how-to-build-a-wireless-driver ? It might be a problem with a faulty driver. Link to comment Share on other sites More sharing options...
Sterium Posted July 24, 2017 Author Share Posted July 24, 2017 Yes, I try! Make command show lot of error... Link to comment Share on other sites More sharing options...
Igor Posted July 24, 2017 Share Posted July 24, 2017 1 hour ago, Sterium said: Make command show lot of error... You have to show us errors, that we are able to help you. Link to comment Share on other sites More sharing options...
Recommended Posts