rino

Members
  • Content Count

    25
  • Joined

  • Last visited


Reputation Activity

  1. Like
    rino got a reaction from AndrewDB in Amlogic Mainline U-boot Compilation   
    @ning
    It worked. Thanks.
     
    @AndrewDB
    So in the procedure for LePotato is enough to change:
    "$FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0"
    in:
    "python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0"
    and so the produced "u-boot.bin.sd.bin" boots.
  2. Like
    rino got a reaction from guidol in Le Potato / C2 / K2 4.19 LTS testing thread   
    On bionic 4.19.12-meson64 #5.67.181226:
    $ xrandr -d :0 -q
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 16384 x 8192
    Composite-1 connected (normal left inverted right x axis y axis)
      720x576i      50.00  
      720x480i      59.94  
    HDMI-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm x 352mm
      1920x1200     59.95*+   (yes)
      1920x1080     60.00  (yes)
      1600x1200     60.00  
      1680x1050     59.88   (yes)
      1280x1024     75.02    60.02  (HDMI only)
      1440x900      59.90  (yes)
      1280x960      60.00  
      1152x864      75.00  
      1024x768      75.03    70.07    60.00  
      832x624       74.55  
      800x600       72.19    75.00    60.32    56.25  
      640x480       75.00    72.81    66.67
     
    Legenda of test result:
    (yes) means that HDMI to HDMI and HDMI to DVI both work
    (HDMI only) means HDMI to HDMI works
    no () means that HDMI to HDMI and HDMI to DVI both don't work.
     
    PS
    To change resolution from UART console I used for example:
    $ xrandr -d :0 --output HDMI-1 --mode 1920x1080
     
  3. Like
    rino got a reaction from TonyMac32 in Le Potato / C2 / K2 4.19 LTS testing thread   
    On bionic 4.19.12-meson64 #5.67.181226:
    $ xrandr -d :0 -q
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 16384 x 8192
    Composite-1 connected (normal left inverted right x axis y axis)
      720x576i      50.00  
      720x480i      59.94  
    HDMI-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm x 352mm
      1920x1200     59.95*+   (yes)
      1920x1080     60.00  (yes)
      1600x1200     60.00  
      1680x1050     59.88   (yes)
      1280x1024     75.02    60.02  (HDMI only)
      1440x900      59.90  (yes)
      1280x960      60.00  
      1152x864      75.00  
      1024x768      75.03    70.07    60.00  
      832x624       74.55  
      800x600       72.19    75.00    60.32    56.25  
      640x480       75.00    72.81    66.67
     
    Legenda of test result:
    (yes) means that HDMI to HDMI and HDMI to DVI both work
    (HDMI only) means HDMI to HDMI works
    no () means that HDMI to HDMI and HDMI to DVI both don't work.
     
    PS
    To change resolution from UART console I used for example:
    $ xrandr -d :0 --output HDMI-1 --mode 1920x1080
     
  4. Like
    rino got a reaction from TonyMac32 in Le Potato / C2 / K2 4.19 LTS testing thread   
    Other test performed. I am starting to understand better the "HDMI to DVI" working/not working laziness problem:
     
    HDMI to DVI works BUT, just after the boot, I have to move the mouse to wake up the monitor and get the desktop (I usually interact with the SBC via the uart console).
     
    That's with the last:
    ARMBIAN 5.67.181221 nightly Ubuntu 18.04.1 LTS 4.19.11-meson64