greg798
-
Posts
30 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by greg798
-
-
Hi
Im build android pie (kernel 4.9.118) for orangepi 3, fine worked, but haved same problems on resolution.
Push 1080p(1980x1080) setting, but bug resolution play video smart youtube 1270x720.
Spoilersu wm size 1920x1080 wm density 240
All the ways here apply to linux and don`t work for me.
How fix this resolution on android?
Possibly in lichee kernel drivers?
-
Hi
Back problem
Im build armbian Armbian_20.11.0-trunk_Orangepi3_bionic_current_5.9.5 and eth0 down, no ip address, no link, how fix this?thanks
-
If the temperature is above 60, the processor resets the frequency to 1.5Ghz, active cooling will give stability.
-
6 hours ago, cjaushe4ka said:
not understand you
Im understood
I have this board, but Im dont have up panfrost.used this http://linux-sunxi.org/Mali_Open_Source_Driver and https://www.96boards.org/blog/panfrost-rock960/
Has anyone been successful in this? who can explain in a simple if not huckster here?
-
On 8/16/2019 at 6:07 PM, cjaushe4ka said:
pls, test my patch for kernel 5.3 with correct panfrost driver
Hi
How your up hw mali midgard on armbian and kernel 5.3?
Any mini tutorial?
-
Hello
Im build armbian 5.2.x (and mesa), but I don’t have enough tutorials to up panfrost on mali.
Tell me, did someone manage to get him to work normally? -
Hi. Not booting last armbian ubuntu.
Opi 3 flash sd on 190607 and freeze boot console massages key map.
solder the capacitor? maybe two capacitor?
-
Hi
Someone opi3 repair bootrom?
Flash zidoo firmaware to opi3 and after have problem.
Thanks
-
It is brake for these ARM SOC devices.
Fbdev version and gbm/wayland exist armhf devices and very bug.
I tried to substitute Open Source Mali Midgard on kernel build but have many error.
Im don't have normal manuals, need many time and knowledge. And this not fact!
-
2 hours ago, yashiki2005 said:
I tried to merge panfrost(from linux-next,supports opi3 gpu mali midgard) as a test to test midgard. Mesa also compiled panfrost compatible version. Kernels with panfrost enabled did not improve performance with glxgears with an average of 50 fps. I nomally use armbian-dev with megous/linux-5.1 kernel, it is an average of 240 fps with glxgears. The megous/linux-5.1 vanilla kernel is more efficient. The video performance seems to be lower CPU load with panfrost, but panfrost still did not show its performance if it was still under development. I have not yet investigated whether there is a problem with the panfrost-compatible code in mesa or with a kernel panfrost.
Some use libhybris on midgard android drivers to unix sytem, but im don't have this experience.
240fps? but im used megous 5.1 on arch linux in AssaultCube max 12fps to xserver-xorg-video-dummy ...
-
On 3/5/2018 at 2:35 PM, joaofl said:
Follows the gmac config on both files for your reference
Excuse me for time.
Did you up Internet eth0?
And unpack firmware img?Im have opi3 h6 and compile android sdk opi3 sdk 7.0 lichee, but many problem.
Bug root, and bug eth0 mac 0.0.0.0, you can advise?
for mac 0.0.0.0.0
maby this problem?
[gmac0] gmac0_used = 1 phy-mode = "rmii" # change this to "rgmii"? gmac_rxd1 = port:PA00<2><default><3><default> gmac_rxd0 = port:PA01<2><default><3><default> gmac_crs = port:PA02<2><default><3><default> gmac_rxerr = port:PA03<2><default><3><default> gmac_txd1 = port:PA04<2><default><3><default> gmac_txd0 = port:PA05<2><default><3><default> gmac_txclk = port:PA06<2><default><3><default> gmac_txen = port:PA07<2><default><3><default> gmac_mdc = port:PA08<2><default><3><default> gmac_mdio = port:PA09<2><default><3><default> gmac-power0 = "vcc-ephy" # change this to "vcc-io"? gmac-power1 = # change this to "axp806_aldo3"? gmac-power2 = tx-delay = 0 rx-delay = 0
-
-
-
Sorry, just buld and work reboot, but what im get this problem megous rep and last development uboot, I do not understand.
Many thanks for your work guys.
Armbian development kernel, dtb, modules for H6 great work to Arch Linux.
PS
dmesg bionic opi3
Quote[ 2.008272] sun50i-de2-bus 1000000.display-engine: Error couldn't map SRAM to device
[ 2.008652] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 2.008888] sun50i-usb3-phy 5210000.phy: failed to get phy clock[ 2.169352] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
little things
-
-
1 hour ago, martinayotte said:
What do you means ?
Im compile last uboot for opi3 and have old problem. Put reboot = poweroff . Again power unplug.
Only me problem?
-
-
4 hours ago, megi said:
Everything necessary is built in. It's just a dd for u-boot and cp for kernel and dtb, and that's it. You don't even need /lib/firmware or /lib/modules.
thanks your method
maybe you know up midgard mali hard support 2D-3D?
-
1 hour ago, megi said:
It's in my opi3-5.1 branch. So, test if you like.
Thanks
I will try later
-
7 hours ago, martinayotte said:
No ! As you can see by timestamp, it is early at boot up !
But those errors should not prevent you from using USB, at least in USB2 mode ...
Im pointed out, usb2.0, 3.0 does not work (im see power my usb devises, but after boot windows manager not data work).
This error after your fix reboot problem.
I think all this concerns kernel drivers and power supply system of board allwinner h6
-
Last update fix reboot yes, but im have error work usb port after boot window manager (lxde)
host kernel: [ 1.775927] sun50i-de2-bus 1000000.display-engine: Error couldn't map SRAM to device Apr 11 22:31:39 localhost kernel: [ 1.776339] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO Apr 11 22:31:39 localhost kernel: [ 1.776581] sun50i-usb3-phy 5210000.phy: failed to get phy clock
Maybe lxde problem?
-
2 hours ago, martinayotte said:
You don't need to go back to 190407 to be able to unplug the power ...
I'm happy
Install Armbian bionic 190411 + xorg + xsever + lxde + lightdm = boot to window lightdm and have not worked my opi3 usb(2.0,3.0) mouse, keyboard
Maybe Armbian alpha?
-
13 minutes ago, dolphs said:
which means, once I will return home I can rebuild image and give it another shot on mu opioneplus devices?
cheers
It does not depend on me, i am simple user and have problem eth0 board opi3
any monipulations with lan network dev in last Armbian bionic 190409 img beta.
Im back to img Armbian bionic 190407 and unplug power.
-
Just now, dolphs said:
Errr from " H6 famous reboot problem " it seems just the orangepi's are affected (opioneplus and opilite2, opi3 )?
reiniting eth0 did work from cold boot ( of course ):
Same error dwmac-sun8i 5020000.ethernet eth0 and very unstable last build, but reboot work
Back build.
Orangepi 3 h6 allwiner chip
in Allwinner sunxi
Posted
That's what I thought the answer would be
well opi3 is dead:)