balbes150
-
Posts
3546 -
Joined
-
Last visited
Posts posted by balbes150
-
-
25.01.2021 в 16:00, balbes150 сказал:
I tested the native build of the image using Bullseye (XFCE) on the latest DESKTOP branch . The minimal (basic) configuration works without errors.
For the full configuration (when all grupps are checked), you need to remove the libreoffice-style-tango package.
I removed the link to the BUSTER package, copied the file package, and deleted the libreoffice-style-tango package. The full build is error-free.
Checking the latest GIT (DESKTOP branch), shows the same error. The SID and Bullseye network reps do not have this package libreoffice-style-tango . If necessary, I can send a PR with a correction.
-
-
15 часов назад, jock сказал:
AFAIK, rk3188 is not a supported SoC in Armbian mainline, official rk3188 soc support never materialized.
The only thing that works is the discontinued balbes builds.
Probably bringing basic functionalities is an easy task, but lack of commonly available hardware precludes that.
On the contrary, not removed, but developed. But not fast enough yet. I hope to add support for building images for rk3188 to my GIT in the future (and if there is a demand, it is possible to send a PR to the official GIT).
-
I forgot to add, in the latest images, the DDBR utility is included. Those who have previously used ArmbianTV are familiar with it, it is a utility for creating and restoring a full backup of eMMC (for example, before installing the system in eMMC, before running updates, before making changes, etc.).
-
6 минут назад, NicoD сказал:
One more thing, do you know how to set the clocks to 2Ghz/1.5Ghz? I remember reading there was a script for that. But can't remember where or how.
If I'm not confused, this option is only available for the main core, it doesn't work for Legacy.
-
14 минут назад, NicoD сказал:
Install to NVMe also doesn't work correct.(with armbian-config) It does copy everything to the NVMe. But still boots from sd-card.
In extlinux.conf it seems to be pointing to the wrong UUID. It works when I set it to the NVMe UUID.
Maybe because you've switched the config file.
No worries for me. As long as I can make it work I'm fine.The installation on NVMe works correctly. I checked it with the latest Buster image install to NVMe and there are no problems. When installing, you must select the correct mode (eMMC + NVMe). Most likely, you chose the wrong mode (the first line in the menu), this is installing u-boot on SD and system on NVMe. Look carefully at the names of the menu items, there are many different combinations, you need to choose the right option.
-
Version 20210226. Fixed NVMe and added a separate DTB for roc-rk3399-pc (works with Renegade Elite) with Legacy kernel. After testing for several weeks u-boot-2021.01 on different rk3399, the transition to u-boot-2021.01 was made
I remind you that the configuration of DTB and other startup parameters is now performed in the file /boot/extlinux/extlinux.conf
-
5 минут назад, NicoD сказал:
Awesome. I will try it now.
I was just going to start making a gaming image on the NVMe and buster legacy on sd-card. Buster on NVMe would be way better. Thank you.In a few hours, I plan to update the images on the site, including with a new version of Buster (which will all have the patched DTB enabled by default).
-
8 часов назад, as400 сказал:
Sound from the analog AV port.
not supported and will not work.
-
22.02.2021 в 00:11, NicoD сказал:
Any idea what could cause this in the NVMe dtb file? I've got no clue.
Fix
-
The new version 20210221.
Important information.
The installation mode in eMMC has changed. Now, the standard application "armbian-config" and the corresponding menu items in it are used for installation in eMMC.
-
New version of ArmbianTV 20210218 for H6 TV boxes.
Please note. Now a single EXT4 partition is used for the entire system. The new images are located at the new link.
https://disk.yandex.ru/d/NdhF0c0iM0TnzQ?w=1
-
New version of ArmbianTV 20210218 for P1 and M1.
An important difference. I made the transition to the startup system using the settings only in the "extlinux.conf" file. You no longer need to use a lot of complex scripts and intermediate text files to describe the startup process. Setting up the DTB is done by editing the line in "extlinux.conf". There you can also change any other startup parameters (disable BOOTFLASH, add a forced binding to the MAC, etc.). That is, you can now use the officially supported parameter format for "extlinux.conf". I also stop publishing versions of Armbian images, because they differ little from the official versions of images from the Armbian download site (i.e. I remove redundant duplication).
-
6 часов назад, MCredbear сказал:
Actually,I did that with the productor's partition format still on the SDcard.I used kpartx to mount the image and only flash it to root partition,and then boot with the kernel from boot partition.I'm confused about how armbian's image for this board boot with only one partition,is it because the 16MB free space before the partition?Theoretically,will it boot successfully by replacing /boot?
use only the full image recording on the SD card. Only then will you get all the components of the startup process working correctly. Now you have broken the correct sequence of the startup system, which was designed to fully write the image to the SD card (without using intermediate "pads" that have unknown behavior).
-
4 часа назад, luuray сказал:
current 21.02.01_focal_current_5.10.12 image,
Write the full name of the image.
4 часа назад, luuray сказал:My board is CORE-3399-JD4
This is a completely different device than the one discussed in this topic. As far as I know, this module is intended for use as part of other equipment , you did not specify which equipment it is used as part of. You did not provide a description of what happens to the main hardware that contains this module. Perhaps in the image that you are trying to disable further output to the UART console, I recommend trying the ArmbianTV image, there the output to the UART console is not disabled and there should be full information about the startup process.
-
8 минут назад, NicoD сказал:
I'll try that again, I did disable the unused audio devices as you describe. Audio was on but everything was 2x too fast.
I don't believe it.....:) So you're doing something wrong.
I can change the audio output device on the fly (when playing a test video) and immediately see how the speed changes. if I select the" wrong " device (the first in the list), the sound and video are accelerated, if I change to HDMI or analog, the video and sound are normalized and works correctly. Please note that I do all the tests on my builds. Can you check the latest version from here ?
-
I checked the Legacy and Current versions (for Firefly Station P1) on Renegade Elite , everything works, u-boot normally starts the system from the SD card and USB media. When running Buster-Legacy + NVMe, I used DTB from the site (the version is not plus), NVMe works and the rest of the hardware works with the media script. On the Curren version, I used DTB (mezzanine from the image composition), NVMe works, LAN works, HDMI sound. I think can consider the Renegade Elite compatible equipment with Station P1 and specify this information on the download page or in the forum thread.
-
10 минут назад, MCredbear сказал:
I had a research,actually,they are the same one.This board is producted by libre and firefly together,but I bought it from firefly's official website,there is nothing about libre or renegade on the website(also this board is called roc-rk3328-cc on this website).And this board's image is only listed in libre's download page,so....
Try images for Station M1 (Armbian\ArmbianTV) with Legacy and Current core. Also try using different dtbs from the image.
http://bbs.t-firefly.com/forum.php?mod=viewthread&tid=2803&extra=page%3D1
-
18 часов назад, NicoD сказал:
I found the cause of the problem.
It's the dtb file for NVMe that's causing it.Ha-ha. I checked it again and as I already wrote to you, with the correct configuration of the device for audio output, everything works without problems with the correct audio and video speed (to DTB plus). This is elementary to do through the GUI, in the upper right corner there is a speaker icon, in it you need to correctly select the device for the output of sound by default (the last line is HDMI, the penultimate line is analog sound). You can even open the settings (Volume) and turn off the first device on the last tabs and leave only the HDMI and analog output (by the way, for the analog output, the default is 14% volume and for normal volume, you need to move the slider to 100% in the settings).
-
18 минут назад, NicoD сказал:
To reproduce this issue you don't need the hat. Just install Buster legacy on the P1 and copy the .dtb file. Then install the media script and video will be 2x the speed. Also the same when installing the media script first. Then the script works as expected.
Now I checked on P1 without NVMe), with the "plus" file-video and sound are accelerated by 2 times, with the non-plus file, video and sound are normal. (DTB files from the site).
NVMe operation has not been verified.
-
14 часов назад, NicoD сказал:
Why? I don't know...
There are two DTB files on the site, try the second file (not a plus). Now I checked this file on a Renegade Elite with NVMe connected and my image Buster-legacy , all the basic elements work (NVMe LAN HDMI sound). I can't test P1 + NVMe yet, I don't have a hat for P1, and moving the hat from Elite to P1 takes a lot of time (having time is critical for me).
-
13 часов назад, NicoD сказал:
I found the cause of the problem.
It's the dtb file for NVMe that's causing it.Have you checked the DTB from the image composition ?
-
14 часов назад, NicoD сказал:
It's not because of the audio output. I disabled the unused ones.
Write in detail what and how you set up with the sound. I regularly check the published images and do not have the problems that you write about.
-
14 часов назад, MCredbear сказал:
Wait a minute,this board is 100% as the same as mine???even the firefly log on it???
I don't have this hardware, so I won't claim that it's the same thing, but from the descriptions and source code for them, I can see that these models are very close.
How to run armbian on MK802 IV (rk3188) box
in Rockchip CPU Boxes
Posted
Perhaps, but when it will be - it is not known.