Jedi Master
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Jedi Master
-
-
2 minutes ago, guidol said:
why do you use the mini-usb (near the HDMI port) and not a normal-size usb-port?
the mini-usb-port is a otg port
did you enable usb only via dtb-file or also via armbian-config -> system -> hardware?
you could try your mini-usb-ethernet adapter via mini2USB converter on the normal usb-port.
I tried armbian-config, I options like can, i2c1 i2c2 etc but not anything related to usb.
I'm using mini-usb because it's DIY firewall, which is enclosed in a box, only exposing mini-usb and hdmi. That's why I'm limited here.
BTW 5.72 build worked fine.
Linux olinuxino 4.19.17-sunxi #5.72.1 SMP Thu Jan 24 13:30:13 EET 2019 armv7l GNU/Linux # Both eth0 and eth1 is shown now. enx405d8213b89a: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 40:5d:82:13:b8:9a txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.x.x netmask 255.255.255.0 broadcast 192.168.43.255 inet6 fe80::aeb2:1dfe:c406:cacc prefixlen 64 scopeid 0x20<link> ether 30:1f:9a:d0:11:e2 txqueuelen 1000 (Ethernet) RX packets 88077 bytes 121325510 (115.7 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12098 bytes 901542 (880.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 62
It worked. I'm interested why it didn't work on latest build.
Jedi.
-
8 hours ago, Igor said:
Those are unofficial builds that Olimex make on their own. Why do you need that particular build? Is most recent from our download section not working properly?
Yes, I cannot make A20-Lime2 work with latest build. I'm using mini-usb ethernet adapter and it is not being recognized. `[ 4.180658] usb0-vbus: disabling`
I read olimex forum and found out Armbian 5.52 works fine with mini-usb ethernet adapter. Even with night build, beta packages it's not working. Also, tried dtb enable usb host, didn't work at all.
uname -a: `Linux lime2 5.1.16-sunxi #5.91.190707 SMP Mon Jul 8 00:07:38 CEST 2019 armv7l GNU/Linux`
Any help is appreciated.
-
Hi,
I have been looking to download "Armbian_5.52_Olinuxino-a20_Debian_stretch_next_4.17.19.img". Torrent that I have is not seed, it been stuck for all day. Can anyone please provide me with downloadable link or please seed the torrent?
Thank you
Jedi
-
Can anyone help?
-
Yes. Nothing is begin logged in dmesg. But when tried USB to ethernet on USB hub it works fine.
When you said it's disabled? Is it this message
"[ 2.961666] usb0-vbus: disabling"
How do I enable it?
-
Armbianmonitor:
Hi,
Lime2 A20 not even detecting mini usb ethernet, which was working perfectly fine on 3.xx.
Manfu: Netgear
USB: USB 2.0 Ethernet Adapter
P/N: 322-10167-01
dmesg doesn't even list the device. Could board's port be damaged? I tired usb port with usb ethernet, it lists as:
Quoteasix 1-1:1.0 eth1: register 'asix' at usb-1c14000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:14:xx:xx:xx:xx
I'm using arbmian Ubuntu 18.04 with beta packages.
Thanks
Where to download old image builds
in Allwinner sunxi
Posted
@guidol
I see g_serial while doing lsmod.
For now it's working for me. I'm using 5.72 build.
The only thing that doesn't work now is reboot or shutdown -r now. It system does to shutdown state even with reboot or shutdown -r now.