Jump to content

nylonatathep

Members
  • Posts

    12
  • Joined

  • Last visited

Posts posted by nylonatathep

  1. Problem solved!

     

    The dtb file is wrong on newer Kernels after 5.3.9

    There is an added option called dai-tdm-slot-width (description) in the sound category which is set to high (0x20). When you set this to 0x10 (decimal 16, I think 16Bit for audio!?) the Sound is in normal speed.

    There is another typo, I think, in line 897 phy-names is set to "phy" but the name of the phy is "hdmi-phy" so its in old dtb's too.

    Corrected dts for Orange Pi PC in attachment.

    Please test this on other boards...

    EDIT: Confirmed on sunvell R69 1.3 with Kernel 5.5.0cr2

     

    Regards

    devicetree-5.4.8.dts

  2. USB on the back does not work => Information:

     

    I compiled Armbian (Bionic, 5.5.0rc2) and tested it on my r69 h2 ver. 1.3 blue PCB with nothing special.

    Everything works fine except the USB on the back.

    After some investigation I checked the dtb file and there is the back-USB port configured as OTG.

    I dont' know if is this a bug or a feature but if you want to use both USB you have ti change the dtb file.

    After decompile change line 322 in dtb from "otg" to "host", compile it again and replace the orginal file in /boot

    I added the corrected dts and the compiled dtb file for Kernel 5.5.0rc2.

     

    sun8i-h2-plus-sunvell-r69.dtb sun8i-h2-plus-sunvell-r69.dts

  3. Okay, succsess! The images are okay for LaFrite.

    Was my fault :(

    There was an error message that only appeared on screen not on UART messages. That message says that one module file cannot be loaded (bad ELF header)...

    After some investigaton I testet my USB drive's an both of them have some bad sectors and these are not affected when I flash a minimal image.

    I think they are corrupted between the many new flashes by testing the images.

    When I use an new USB drive erverything is booting correctly with 5.3 and 5.4 Images but with 5.4 there is no Audio.

    Thanks for your work and the help with the console output etc.

     

  4. 1 hour ago, balbes150 said:

    Do you have a UART log ?

    Same with meson-gxl-s805x-p241.dtb

     

    I added the log from armbian 19.11.3 Kernel 5.3.11 too

     

    Armbian_5.99_Aml-g12_Debian_buster_default_5.3.0_20191122 boots

    Armbian_5.99_Aml-g12_Debian_buster_default_5.3.0_desktop_20191122 ended up with kernel panic

     

    output_2019-11-23_09-22-34.log armbian19.11.3.log

    Armbian_5.99_Aml-g12_Debian_buster_default_5.3.0_desktop_20191122.log Armbian_5.99_Aml-g12_Debian_buster_default_5.3.0_20191122

  5. Tested with Nexbox A95X S905x 1GB (meson-gxl-s905x-nexbox-a95x.dtb) and Magicsee N5 S905x 2GB  (meson-gxl-s905x-p212.dtb) and Buster Desktop Image

     

    Dev 20191118 on both Boxes boot OK

    HDMI Sound OK

    3D Acceleration OK (glxgears)

    LAN OK

    Wifi on A95X (RTL8189ETV) no Adapter etc. found

    Wifi on N5 (QCA9377) is found but dmesg says "ath10k_sdio...Unsupported hardware version: 0x5020001"

    BT on N5 not found

     

    Next 20191119 on booth Boxes boot OK

    HDMI Sound - No Sound

    3D Accreleration OK

    LAN OK

    Wifi on A95X (RTL8189ETV) no Adapter etc. found

    Wifi on N5 (QCA9377) is found but dmesg says "ath10k_sdio...Unsupported hardware version: 0x5020001"

    BT on N5 not found

  6. I know the wip status but I was so impressed that nearly everything is working that I tested ;)

     

    The same problem with sound was on libre's first release image and was fixed on second but they don't write a changelog or someting :(

  7. A very thank you to TonyMac32 and the great Armbian comunity!

     

    I've compiled the desktop image with no special options (just select the target) and everything is running very nice.

    The CPU clock is set to max 1.5 GHz, slightly overclocked but it runs without headsink around 50-60 °C on high loads the temperatur rise up to around 65-68 °C in my case.

    OpenGL (glxgears) and Gles2 (es2gears) runs fine, even the WebGL in Chromium is supported.

    Video is not HW accelerated in included mpv and Chromium, I think there are any patches needed, but its ok at the moment.

     

    I have only one problem, there is no audio. Only the DummyOutput is present. aplay -l says no soundcards found...

    dmesg has no message related to "sound" or "audio". USB soundcard works pretty well but is not that great experiene :)

     

    Can someone give me a hint to get sound working? load missing modules etc.?

     

    For easy testing, the image i compiled can be downloaded here (7zip file): https://drive.google.com/open?id=1Xl-4_R1aolxJMZFqlZdb0voNxOxbJ4PC

     

    regards

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines