DevShanky

This topic has been discussed earlier but there is not concrete mechanism explained to achieve this. Ideally I would like to display a boot logo or boot splash during startup. The device is Orange Pi Plus 2e. As per experience and as mentioned on this forum earlier plymouth was not useful in this case. I tried to set logo="enabled" in /boot/armbianEnv.txt but this doesn't help. When Armbian loads for first time on the device from the image downloaded from this site, it displays 'Initializing Boot Loader' logo image. Pretty cool!!! Can we have something like this for a custom image displayed each time on reboot. I understand that this will be displayed only till kernel loads, but that is good enough of me. I can settle with this limited functionality, but am lost on how to do this. Any pointers or suggestion will be highly appreciated. Stay safe! Regards -R

Hello balbes150; I installed Armbian_20.02.0-rc1.036_Arm-64_buster_current_5.5.0-rc6_desktop_20200205.img on Tanix-TX3-Mini-S905W. Works like charm. Thank you! Thank you! Thank you! Great work! Couldn't locate nand-sata-install.sh on this distribution. Copied from another image but it doesn't work. The devices has 16GB eMMC. Armbian-config also does not have this option. Any help to move image to eMMC is highly appreciated. Thanks Rajesh

Is it possible to include the Wifi driver ssv6015 with the kernel in the new builds? Or can you point me to the kernel source for the latest builds so that I can attempt to include this for a custom build? Thanks Rajesh

Thank you Igor. You guys are doing tremendous job in supporting so many different variants of boards and releases. Very commendable. Your efforts are sincerely appreciated. Best Regards Rajesh

Basic information: Board: Orange Pi Plus 2e Image: Armbian_19.11.3_Orangepiplus2e_buster_current_5.3.9.img Issue: No sound on HDMI output There has been quite a few suggestions for this issue here and and OrangePi Plus and none works for me. Tried following: 0. sudo apt-get update && upgrade 1. Created and Changed /etc/asound.conf Version 1: pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } Version 2: pcm.!default { type hw card 1 device 0 } ctl.!default { type hw card 1 } 2. Verified user is included in group 'audio' and has permissions groups raj tty disk dialout sudo audio video plugdev games users systemd-journal input netdev ssh cat /proc/asound/cards 0 [Codec ]: H3_Audio_Codec - H3 Audio Codec H3 Audio Codec 1 [allwinnerhdmi ]: allwinner_hdmi - allwinner,hdmi allwinner,hdmi cat /proc/asound/pcm 00-00: CDC PCM Codec-0 : CDC PCM Codec-0 : playback 1 : capture 1 01-00: 1c22800.i2s-i2s-hifi i2s-hifi-0 : 1c22800.i2s-i2s-hifi i2s-hifi-0 : playback 1 cat /proc/asound/devices 0: [ 0] : control 16: [ 0- 0]: digital audio playback 24: [ 0- 0]: digital audio capture 32: [ 1] : control 33: : timer 48: [ 1- 0]: digital audio playback cat /proc/asound/modules 0 (efault) 1 snd_soc_simple_card Output of: alsamixer -c 1 controls Outputs: asound$ amixer -c 1 controls numid=2,iface=PCM,name='ELD' numid=1,iface=PCM,name='Playback Channel Map' amixer set PCM 10% unmute amixer: Unable to find simple control 'PCM',0 amixer -c 1 set PCM 2dB+ amixer: Unable to find simple control 'PCM',0 Reinstalled - alsa-utils cat /var/lib/alsa/asound.state state.sun4icodec { control.1 { iface MIXER name 'Power Amplifier Volume' value 32 comment { access 'read write' type INTEGER count 1 range '0 - 63' dbmin -9999999 dbmax 0 dbvalue.0 -3100 } } control.2 { iface MIXER name 'Left Mixer Left DAC Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'Right Mixer Right DAC Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.4 { iface MIXER name 'Right Mixer Left DAC Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.5 { iface MIXER name 'Power Amplifier DAC Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface MIXER name 'Power Amplifier Mixer Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.7 { iface MIXER name 'Power Amplifier Mute Switch' value true comment { access 'read write' type BOOLEAN count 1 } } } state.SPDIF { control { } } state.Codec { control.1 { iface MIXER name 'DAC Playback Volume' value 45 comment { access 'read write' type INTEGER count 1 range '0 - 63' dbmin -7308 dbmax 0 dbvalue.0 -2088 } } control.2 { iface MIXER name 'Line In Playback Volume' value 3 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin -450 dbmax 600 dbvalue.0 0 } } control.3 { iface MIXER name 'Line Out Playback Volume' value 17 comment { access 'read write' type INTEGER count 1 range '0 - 31' dbmin -9999999 dbmax 0 dbvalue.0 -2100 } } control.4 { iface MIXER name 'Line Out Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Mic2 Playback Volume' value 3 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin -450 dbmax 600 dbvalue.0 0 } } control.6 { iface MIXER name 'Mic2 Boost Volume' value 4 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin 0 dbmax 4200 dbvalue.0 3300 } } control.7 { iface MIXER name 'Mic1 Playback Volume' value 3 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin -450 dbmax 600 dbvalue.0 0 } } control.8 { iface MIXER name 'Mic1 Boost Volume' value 4 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin 0 dbmax 4200 dbvalue.0 3300 } } control.9 { iface MIXER name 'ADC Gain Capture Volume' value 3 comment { access 'read write' type INTEGER count 1 range '0 - 7' dbmin -450 dbmax 600 dbvalue.0 0 } } control.10 { iface MIXER name 'DAC Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.11 { iface MIXER name 'DAC Reversed Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.12 { iface MIXER name 'Line In Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.13 { iface MIXER name 'Mic1 Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Mic2 Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.15 { iface MIXER name 'Mixer Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.16 { iface MIXER name 'Mixer Reversed Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.17 { iface MIXER name 'Line In Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.18 { iface MIXER name 'Mic1 Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.19 { iface MIXER name 'Mic2 Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.20 { iface MIXER name 'Line Out Source Playback Route' value.0 Stereo value.1 Stereo comment { access 'read write' type ENUMERATED count 2 item.0 Stereo item.1 'Mono Differential' } } } state.allwinnerhdmi { control.1 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 comment { access read type INTEGER count 6 range '0 - 36' } } control.2 { iface PCM name ELD value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read volatile' type BYTES count 128 } } No luck till date. Thanks Rajesh

Any chances of current all-in-one version 5.4.y or 5.5-rc3.y for RockChip 3399 would work (with limited functionality) if the dtb file for OPi 4B is made available? Just checking... Thanks Rajesh

When is it likely to get support and Armbian image for Orangi Pi 4B? Thanks Rajesh

A quick look at Armbian monitor output revealed that Lima is actually installed. Here is an output for 'sudo modinfo lima' root@orangepiplus2e:~# sudo modinfo lima filename: /lib/modules/5.4.8-sunxi/kernel/drivers/gpu/drm/lima/lima.ko license: GPL v2 description: Lima DRM Driver author: Lima Project Developers alias: of:N*T*Carm,mali-450C* alias: of:N*T*Carm,mali-450 alias: of:N*T*Carm,mali-400C* alias: of:N*T*Carm,mali-400 depends: gpu-sched intree: Y name: lima vermagic: 5.4.8-sunxi SMP mod_unload ARMv7 thumb2 p2v8 parm: sched_timeout_ms:task run timeout in ms (int) How can I setup lima driver to VDPAU? I tried export VDPAU_DRIVER=lima. It looks like I am missing something. Thanks Rajesh

I installed the latest 5.4.8 Buster Desktop image on my Orange Pi +2e board but find the Mali drivers are (Utgard) missing or not loaded. I have tried to follow every possible links including (https://linux-sunxi.org/Mali_binary_driver) related to get VDPAU / VAAPI and GPU but with very little success. I want to have HW acceleration enabled for playing MPEG in full screen mode 1920x1280 resolution using mpv. The frame drops are significant. Questions: Are Mali drivers included in this build? If it is then how can I go about adding those drivers. Is there any licencing issues in adding Mali drivers to the Armbian image? Is there any chances of Lima drivers being included in future releases? There are Mali drivers available on ARM developer site that provides GPU Kernel Device drivers. Can I use them to build the custom Armbian image? Appreciate any help in this matter. Thanks Rajesh

I think you are referring to img file and not dtb file in your boot.ini or uEnv.ini. look at this line reading /dtb/amlogic/dtb_librelect_workingwifi.img

I am looking for an image which has ssv6051 Wifi module. Looks like there are other folks here looking for that as well. Can some provide a download link? Thanks Rajesh