[CSC Armbian for RK322x TV box boards]

Hello! I opened my box and it has KMF720012M-B214 which is a 8GB e.MMC D-die R11 and 8Gb LPDDR3 SDRAM B-die R02 so it is a 1GB ram right? or is it 8gb ram if so, how do i address that much ram if it would be possible

[Armbian for Amlogic S905X3]

@nguyen I am planning on buying another s905x3 tv box and I would like to know about your experiences about the A95X F3 slim. It is the cheapest TV box I could find with relatively efficient process node and architecture (12nm and cortex a55)

[Armbian for Amlogic S905X3]

On 6/8/2020 at 1:57 PM, Armin said:

Ok, that means for your box, forget the way of the file boot.ext or boot.usb.

 

If you have tried without success the DTB file with ethernet fix (meson-sm1-sei610-ethfix.dtb), then the command "sudo ethtool –s eth0 speed 100 duplex full autoneg on" doesn't help you because these value are the same than meson-sm1-sei610-ethfix.dtb.

 

I think you need to know the name of your Ethernet chipset to find the right drivers of it. Without keyboard, you can check directly on the PCB of the box or with a keyboard, you make this command "armbianmonitor -u" and check into the created report (example: http://ix.io/2oEe).

 

I see PSF-2447 next to the ethernet port then it connects to RTL8211F. How do I find and install the drivers for it? It has the same board as the image in page 3 X88PRO-S905X3-D4-V1.0

[Armbian for Amlogic S905X3]

15 hours ago, Armin said:

 

I was facing to the same Ethernet issue with meson-sm1-sei610-ethfix.dtb and the problem has been solved when I have copied file u-boot.sd to u-boot.ext on the SD card.

 

I don't understand the reason because I was thinking that you need to add the "u-boot.ext" file if the system doesn't want to boot or color issue but not for an ethernet issue.

 

Maybe @balbes150 can confirm the relation between this missing file and some others issues.

I made a copy of u-boot.sd and renamed it to u-boot.ext and now it is stuck in a boot loop. I tried doing it on a usb but using u-boot.usb instead of u-boot.sd and it only boots to android. Are there any way I can make ethernet working because I don't have a keyboard to log in or type in commands. Maybe make a script that does "sudo ethtool –s eth0 speed 100 duplex full autoneg on" but I don't know how to do it by adding a file or using a pc