Pander

I'm pretty sure my LTS's CPU had "A64" (or possibly "A64-H") on it, not "R18", but I've attached a heatsink to it now, so I can't check just by looking at it.  I guess the information might be accessible via software, but I can't immediately see where.
 
Also, my board does have a microSD card slot, but it's under the board, where the pluggable eMMC socket is on top.  The power jack is a barrel socket, with 3.5 mm outer diameter.
 
I tried the .dts file and amixer commands in this comment
but still didn't get any audio coming out of my headphones.
 
I'm willing to help, but I don't have much experience with .dts files or amixer; and, as you may have guessed by now, I can't promise to respond quickly.

@Pander
 
By the PI-2-bus, mine has this on it:
 
Pine A64 LTS Version V2
2021-05-13

I found this project very interesting and I would like to try Armbian for this new board Turris MOX.
I've got your build environment working and tested my own build for a couple of supported boards. It was successful.
I would like to ask you if you could help me in preparing the .config file for this board.
 
Board Specification: https://mox.turris.cz/en/specification/
Documentation: https://doc.turris.cz/doc/en/howto/mox/mox-a-cpu
Indiegogo: https://www.indiegogo.com/projects/turris-mox-modular-open-source-router
 
 

Thanks. I wasn't implying there was something wrong with the build process itself, but the module that was disabled in the config. Here is the PR https://github.com/armbian/build/pull/2381