[5.10.21 21.02.3 becomes unresponsive after approximately a week]

To post a positive update on this I've upgraded Armbian to 5.10.23 21.05.2 with OMV 5.6.8-1 and ZFS 2.0.3-1~bpo10+1 and it's now been running for 25 days without becoming unresponsive, memory usage continues to sit at around 33% and system load is low.

[5.10.21 21.02.3 becomes unresponsive after approximately a week]

Stront, the behaviour suggests high cpu usage or possibly lack of free memory; I can't login via ssh or local serial console because it times out. Unfortunately dmesg doesn't go back beyond the reboot.

 

Mangix, do you suspect it's related to OpenZFS ?

[5.10.21 21.02.3 becomes unresponsive after approximately a week]

I'm running a Helios4 NAS with OMV 5.6.6-1 and ZFS 2.0.3. After running for approximately a week it becomes unresponsive - OMV login shows a blue screen but doesn't get to login page, SSH timeout and serial login just keeps going back to the login prompt without asking for the password. Repowering the unit (physically disconnecting the power because there is no way to shut it down gracefully) brings it back to life and it runs again for a week or so before the same thing happens again. I'm not quite sure where to start troubleshooting this. Any ideas ?

 

[Kernel panic in 5.9.14 20.11.10]

... and on the third boot it just seems to stall

 

Quote

DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 323
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80786
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5b60
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Mar 08 2021 - 14:54:58 +0000)

SoC: Rockchip rk3399
Reset cause: unknown reset
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
238 bytes read in 4 ms (57.6 KiB/s)
15761964 bytes read in 671 ms (22.4 MiB/s)
28582400 bytes read in 1212 ms (22.5 MiB/s)
81913 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3de0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    15761900 Bytes = 15 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fe7000, end f5eef1ec ... OK
   Loading Device Tree to 00000000f4f6a000, end 00000000f4fe6fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.21-rockchip64 (root@hirsute) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021
[    0.000000] Machine model: Helios64
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 128 MiB at 0x00000000ecc00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 4088 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261632 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11776 pages used for memmap
[    0.000000]   DMA32 zone: 753664 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 32 pages/cpu s94040 r8192 d28840 u131072
[    0.000000] pcpu-alloc: s94040 r8192 d28840 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=c559a861-be25-4b41-a161-d0c3d75c0089 rootwait rootfstype=ext4 console=ttyS2,1500000  consoleblank=0 loglevel=7 ubootpart=559a8d18-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[    0.000000] Memory: 3739356K/4061184K available (14848K kernel code, 2632K rwdata, 5972K rodata, 4352K init, 580K bss, 190756K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @40100000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000400d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000400e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001510] Console: colour dummy device 80x25
[    0.001654] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001680] pid_max: default: 32768 minimum: 301
[    0.001850] LSM: Security Framework initializing
[    0.001896] Yama: becoming mindful.
[    0.002047] AppArmor: AppArmor initialized
[    0.002155] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002192] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005910] rcu: Hierarchical SRCU implementation.
[    0.007107] Platform MSI: interrupt-controller@fee20000 domain created
[    0.007765] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.010310] EFI services will not be available.
[    0.011034] smp: Bringing up secondary CPUs ...
[    0.012213] Detected VIPT I-cache on CPU1
[    0.012263] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012283] GICv3: CPU1: using allocated LPI pending table @0x00000000400f0000
[    0.012360] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013783] Detected VIPT I-cache on CPU2
[    0.013833] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013852] GICv3: CPU2: using allocated LPI pending table @0x0000000040180000
[    0.013928] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.015378] Detected VIPT I-cache on CPU3
[    0.015428] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.015448] GICv3: CPU3: using allocated LPI pending table @0x0000000040190000
[    0.015524] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.016954] CPU features: detected: Spectre-v2
[    0.016961] CPU features: detected: Spectre-v4
[    0.016966] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.016974] Detected PIPT I-cache on CPU4
[    0.017011] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.017026] GICv3: CPU4: using allocated LPI pending table @0x00000000401a0000
[    0.017074] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.018346] Detected PIPT I-cache on CPU5
[    0.018384] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.018400] GICv3: CPU5: using allocated LPI pending table @0x00000000401b0000
[    0.018450] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.018635] smp: Brought up 1 node, 6 CPUs
[    0.018746] SMP: Total of 6 processors activated.
[    0.018762] CPU features: detected: 32-bit EL0 Support
[    0.018776] CPU features: detected: CRC32 instructions
[    0.018791] CPU features: detected: 32-bit EL1 Support
[    0.045624] CPU: All CPU(s) started at EL2
[    0.045707] alternatives: patching kernel code
[    0.049499] devtmpfs: initialized
[    0.066204] Registered cp15_barrier emulation handler
[    0.066234] Registered setend emulation handler
[    0.066477] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.066554] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.069568] pinctrl core: initialized pinctrl subsystem
[    0.070247] D2-0:1.0: USB hub found
[    2.957870] hub 2-0:1.0: 1 port detected
[    2.959913] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.960419] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    2.961265] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000010002010010
[    2.962175] xhci-hcd xhci-hcd.0.auto: irq 76, io mem 0xfe900000
[    2.963100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.963830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.964466] usb usb3: Product: xHCI Host Controller
[    2.964900] usb usb3: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[    2.965469] usb usb3: SerialNumber: xhci-hcd.0.auto
[    2.966487] hub 3-0:1.0: USB hub found
[    2.966869] hub 3-0:1.0: 1 port detected
[    2.967560] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.968056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    2.968738] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    2.969391] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.970265] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.970996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.971633] usb usb4: Product: xHCI Host Controller
[    2.972066] usb usb4: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[    2.972635] usb usb4: SerialNumber: xhci-hcd.0.auto
[    2.973580] hub 4-0:1.0: USB hub found
[    2.974003] hub 4-0:1.0: 1 port detected
[    2.974836] usbcore: registered new interface driver usb-storage
[    2.978117] mousedev: PS/2 mouse device common for all mice
[    2.980064] i2c /dev entries driver
[    2.984484] pca953x 2-0020: using no AI
[    2.995428] rk808 0-001b: chip id: 0x0
[    2.999647] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.000219] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.000770] rk808-regulator rk808-regulator: max buck steps per change: 4
[    3.002536] vdd_center: supplied by vcc5v0_sys
[    3.003588] vdd_cpu_l: supplied by vcc5v0_sys
[    3.004323] vcc_ddr_s3: supplied by vcc5v0_sys
[    3.005379] vcc1v8_sys_s3: supplied by vcc5v0_sys
[    3.006510] vcc1v8_dvp: supplied by vcc5v0_sys
[    3.007397] vcc3v0_touch: supplied by vcc5v0_sys
[    3.009146] vcc1v8_s3: supplied by vcc5v0_sys
[    3.009815] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
[    3.011556] vcc_sdio_s0: supplied by vcc5v0_sys
[    3.012466] vcca3v0_codec: supplied by vcc5v0_sys
[    3.014090] vcc1v5_s3: supplied by vcc5v0_sys
[    3.014999] vcca1v8_codec: supplied by vcc5v0_sys
[    3.016611] vcc3v0_s3: supplied by vcc5v0_sys
[    3.017147] vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER
[    3.017777] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
[    3.018817] vcc3v3_s0: supplied by vcc3v3_sys_s3
[    3.022936] rk808-rtc rk808-rtc: registered as rtc0
[    3.023935] rk808-rtc rk808-rtc: setting system clock to 2021-03-10T11:09:07 UTC (1615374547)
[    3.027822] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.029682] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    3.030291] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    3.030842] vdd_cpu_b: supplied by vcc5v0_sys
[    3.034236] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.036109] vdd_gpu: supplied by vcc5v0_sys
[    3.044188] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    3.046848] sdhci: Secure Digital Host Controller Interface driver
[    3.047398] sdhci: Copyright(c) Pierre Ossman
[    3.047819] Synopsys Designware Multimedia Card Interface Driver
[    3.049711] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.050178] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    3.050859] dwmmc_rockchip fe320000.mmc: Using internal
                                                          [    3.283567] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    3.285827] dwmmc_rockchip fe320000.mmc: All phases bad!
[    3.286333] mmc1: tuning execution failed: -5
[    3.287194] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    3.287787] pci_bus 0000:00: root bus resource [bus 00-1f]
[    3.288278] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    3.288889] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address
    [    3.297220] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.298195] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[    3.298791] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    3.299414] pci 0000:01:00.0: reg 0x10: [io  size 0x0080]
[    3.299921] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    3.300542] pci 0000:01:00.0: reg 0x14: [io  size 0x0080]
[    3.301050] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    3.301673] pci 0000:01:00.0: reg 0x18: [io  size 0x0080]
[    3.302195] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.302862] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    3.303547] pci 0000:01:00.0: reg 0x1c: [io  size 0x0080]
[    3.304056] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    3.304678] pci 0000:01:00.0: reg 0x20: [io  size 0x0080]
[    3.305187] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[    3.305769] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.306411] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[    3.307379] pci 0000:01:00.0: PME# supported from D3hot
[    3.308083] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    3.314563] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.315046] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[    3.315982] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[    3.316598] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    3.317240] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    3.317853] pci 0000:01:00.0: BAR 0: no space for [io  size 0x0080]
[    3.318423] pci 0000:01:00.0: BAR 0: failed to assign [io  size 0x0080]
[    3.319010] pci 0000:01:00.0: BAR 1: no space for [io  size 0x0080]
[    3.319564] pci 0000:01:00.0: BAR 1: failed to assign [io  size 0x0080]
[    3.320148] pci 0000:01:00.0: BAR 2: no space for [io  size 0x0080]
[    3.320703] pci 0000:01:00.0: BAR 2: failed to assign [io  size 0x0080]
[    3.321287] pci 0000:01:00.0: BAR 3: no space for [io  size 0x0080]
[    3.321840] pci 0000:01:00.0: BAR 3: failed to assign [io  size 0x0080]
[    3.322438] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0080]
[    3.322992] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0080]
[    3.323581] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.324028] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    3.324861] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    3.325712] pcieport 0000:00:00.0: PME: Signaling with IRQ 90
[    3.326615] pcieport 0000:00:00.0: AER: enabled with IRQ 90
[    3.327448] ahci 0000:01:00.0: version 3.0
[    3.327836] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.328969] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.329647] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    3.330401] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    3.334988] scsi host0: ahci
[    3.336065] scsi host1: ahci
[    3.336948] scsi host2: ahci
[    3.337820] scsi host3: ahci
[    3.338683] scsi host4: ahci
[    3.339168] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 91
[    3.339825] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 92
[    3.340479] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 93
[    3.341131] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 94
[    3.341784] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 95
[    3.350496] input: gpio-keys as /devices/platform/gpio-keys/input/input0
                                                                           [    3.578059] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.727113] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[    3.727838] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.728469] usb 4-1: Product: USB3.0 Hub
[    3.728919] usb 4-1: Manufacturer: VIA Labs, Inc.
[    3.753658] hub 4-1:1.0: USB hub found
[    3.754123] hub 4-1:1.0: 4 ports detected
[    4.409995] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.431009] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[    4.431748] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.432394] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[    4.432851] usb 4-1.4: Manufacturer: Realtek
[    4.433233] usb 4-1.4: SerialNumber: 000000001
[   11.853950] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   11.922007] ata1.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   11.922615] ata1.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   11.933432] ata1.00: configured for UDMA/133
[   11.934539] scsi 0:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   11.936688] sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   11.937389] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   11.937983] sd 0:0:0:0: [sda] Write Protect is off
[   11.938423] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.939043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.987321]  sda: sda1 sda9
[   11.990547] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.589949] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.668155] ata2.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   12.668762] ata2.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   12.679512] ata2.00: configured for UDMA/133
[   12.680364] scsi 1:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   12.682276] sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   12.682978] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   12.683511] sd 1:0:0:0: [sdb] Write Protect is off
[   12.683948] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   12.684514] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.729676]  sdb: sdb1 sdb9
[   12.732877] sd 1:0:0:0: [sdb] Attached SCSI disk
[   13.277925] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.295051] ata3.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.295656] ata3.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.306397] ata3.00: configured for UDMA/133
[   13.307127] scsi 2:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.309006] sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.309714] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   13.310341] sd 2:0:0:0: [sdc] Write Protect is off
[   13.310781] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   13.311348] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.351995]  sdc: sdc1 sdc9
[   13.355265] sd 2:0:0:0: [sdc] Attached SCSI disk
[   13.901923] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.926228] ata4.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.926830] ata4.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.937473] ata4.00: configured for UDMA/133
[   13.938216] scsi 3:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.940100] sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.940808] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   13.941341] sd 3:0:0:0: [sdd] Write Protect is off
[   13.941779] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   13.942390] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.990947]  sdd: sdd1 sdd9
[   13.994199] sd 3:0:0:0: [sdd] Attached SCSI disk
[   14.252646] ata5: SATA link down (SStatus 0 SControl 300)
[   14.256173] Freeing unused kernel memory: 4352K
[   14.256747] Run /init as init process
[   14.257083]   with arguments:
[   14.257354]     /init
[   14.257564]     earlyprintk
[   14.257818]   with environment:
[   14.258145]     HOME=/
[   14.258364]     TERM=linux
[   14.258613]     ubootpart=559a8d18-01
[   14.258942]     cgroup_enable=memory
[   14.259265]     cgroup_memory=1
Loading, please wait...
Starting version 241
[   14.900381] input: adc-keys as /devices/platform/adc-keys/input/input1
[   15.003286] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   15.004379] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   15.005332] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   15.007096] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   15.007928] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   15.008436] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[   15.008949] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   15.009864] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   15.010687] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   15.016265] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   15.022033] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   15.022681] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[   15.023150] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   15.023810] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   15.024470] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   15.024935] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   15.025556] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   15.026449] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   15.026979] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   15.027497] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   15.191982] libphy: stmmac: probed
[   15.192344] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   15.193457] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Begin: Loading essential drivers ... [   15.485606] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[   15.769808] random: crng init done
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
/dev/mmcblk1p1: recovering journal
/dev/mmcblk1p1: clean, 103923/2212736 files, 755762/7709728 blocks
done.
[   16.184263] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... /scripts/local-bottom/mdadm: 2: /scripts/local-bottom/mdadm: rm: not found
done.
Begin: Running /scripts/init-bottom ... done.
[   17.149143] systemd[1]: Inserted module 'autofs4'
[   17.216889] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   17.219720] systemd[1]: Detected architecture arm64.

Welcome to Armbian 21.02.3 Buster!

[   17.256687] systemd[1]: Set hostname to <helios64-archive.home>.
[   18.404002] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[   18.424391] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[   18.427437] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[   18.555155] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[   18.689868] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[   18.709509] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[   18.740337] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Reached target Swap.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Availability of block devices...
         Starting Load Kernel Modules...
         Starting Create list of re…odes for the current kernel...
         Mounting RPC Pipe File System...
[  OK  ] Listening on Network Service Netlink Socket.
[   18.865080] lm75 2-004c: supply vs not found, using dummy regulator
[   18.866397] lm75 2-004c: hwmon4: sensor 'lm75'
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Created slice User and Session Slice.
         Mounting Kernel Debug File System...
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Syslog Socket.
         Starting Monitoring of LVM…meventd or progress polling...
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on Journal Audit Socket.
         Mounting Huge Pages File System...
[  OK  ] Reached target System Time Synchronized.
         Starting Set the console keyboard layout...
[  OK  ] Listening on LVM2 poll daemon socket.
[   19.015582] RPC: Registered named UNIX socket transport module.
[   19.016118] RPC: Registered udp transport module.
[   19.016536] RPC: Registered tcp transport module.
[   19.016954] RPC: Registered tcp NFSv4.1 backchannel transport module.
         Starting Nameserver information manager...
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
         Mounting NFSD configuration filesystem...
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Reached target Slices.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Availability of block devices.
[  OK  ] Started Load Kernel Modules.
[   19.156151] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Monitoring of LVM2… dmeventd or progress polling.
[  OK  ] Started Nameserver information manager.
[   19.228327] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  OK  ] Mounted NFSD configuration filesystem.
         Starting Create System Users...
         Starting Load/Save Random Seed...
         Starting pNFS block layout mapping daemon...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
[  OK  ] Started Create System Users.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started pNFS block layout mapping daemon.
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting Mount /tmp as tmp…e access to the root device...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted Mount /tmp as tmpf…ite access to the root device.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
         Starting Network Service...
         Starting udev Wait for Complete Device Initialization...
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Started Helper to synchronize boot up for ifupdown.
[  OK  ] Started Network Service.
         Starting Wait for Network to be Configured...
[   20.154137] input: beeper as /devices/platform/beeper/input/input2
[  OK  ] Found device /dev/ttyS2.
[   20.258596] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.263487] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   20.263961] mc: Linux media interface: v0.10
[   20.264239] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   20.267927] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   20.298775] videodev: Linux video capture interface: v2.00
[   20.371121] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[   20.384165] panfrost ff9a0000.gpu: clock rate = 500000000
[   20.397581] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[   20.401483] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[   20.403165] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   20.403692] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[   20.403887] rockchip-vop ff900000.vop: Adding to iommu group 3
[   20.404648] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000010002010010
[   20.405778] xhci-hcd xhci-hcd.2.auto: irq 75, io mem 0xfe800000
[   20.406779] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   20.407516] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.408152] usb usb5: Product: xHCI Host Controller
[   20.408583] usb usb5: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.409149] usb usb5: SerialNumber: xhci-hcd.2.auto
[   20.410203] hub 5-0:1.0: USB hub found
[   20.410592] hub 5-0:1.0: 1 port detected
[   20.411301] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   20.411802] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[   20.412484] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[   20.413351] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   20.414077] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   20.414840] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   20.418176] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   20.419048] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   20.419788] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.420428] usb usb6: Product: xHCI Host Controller
[   20.420893] usb usb6: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.421237] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   20.421475] usb usb6: SerialNumber: xhci-hcd.2.auto
[   20.422853] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   20.423381] hub 6-0:1.0: USB hub found
[   20.423829] hub 6-0:1.0: 1 port detected
[   20.425305] rockchip-rga ff680000.rga: HW Version: 0x03.02
[   20.429554] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[   20.436234] [drm] unsupported AFBC format[3231564e]
[   20.438158] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[   20.443914] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[   20.446204] rkvdec ff660000.video-codec: Adding to iommu group 1
[   20.447586] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   20.448880] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[   20.451691] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[   20.453981] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[   20.455780] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[   20.457419] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
[   20.461833] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[   20.462985] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   20.464177] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   20.698771] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   20.762342] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   20.874216] spl: loading out-of-tree module taints kernel.
[   20.874220] spl: loading out-of-tree module taints kernel.
[   20.874624] spl: module verification failed: signature and/or required key missing - tainting kernel
[   20.897633] icp: module license 'CDDL' taints kernel.
[   20.897637] icp: module license 'CDDL' taints kernel.
[   20.897641] icp: module license 'CDDL' taints kernel.
[   20.897657] Disabling lock debugging due to kernel taint
[   20.898373] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[   20.914133] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
[   20.914604] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
[   20.914604]          US6,570,884, US6,115,776, and US6,327,625.
[   20.914604]
[   20.916166] usbcore: registered new interface driver r8152
[   20.953724] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   21.318101] ZFS: Loaded module v2.0.1-1, ZFS pool version 5000, ZFS filesystem version 5
[  OK  ] Started udev Wait for Complete Device Initialization.
[   21.473993] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
         Starting Install ZFS kernel module...
[  OK  ] Started Install ZFS kernel module.
         Starting Import ZFS pools by cache file...
[   21.850423] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[**    ] (1 of 2) A start job is running for…ols by cache file (14s / no limit)
[   ***] (2 of 2) A start job is running for… to be Configured (33s / no limit)
[  OK  ] Started Import ZFS pools by cache file.
[   52.743958] systemd[1]: Reached target ZFS pool import target.
[  OK  ] Reached target ZFS pool import target.
[   52.765037] systemd[1]: Starting Mount ZFS filesystems...
         Starting Mount ZFS filesystems...
[   52.787636] systemd[1]: Starting Wait for ZFS Volume (zvol) links in /dev...
         Starting Wait for ZFS Volume (zvol) links in /dev...
[   52.874927] systemd[1]: Started Wait for ZFS Volume (zvol) links in /dev.
[  OK  ] Started Wait for ZFS Volume (zvol) links in /dev.
[   52.887118] systemd[1]: Reached target ZFS volumes are ready.
[  OK  ] Reached target ZFS volumes are ready.
[   53.003514] systemd[1]: Started Mount ZFS filesystems.
[  OK  ] Started Mount ZFS filesystems.
[   53.006792] systemd[1]: Reached target Local File Systems.
[  OK  ] Reached target Local File Systems.
[   53.018269] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[   53.027450] systemd[1]: Starting Cleanup monit state file...
         Starting Cleanup monit state file...
         Starting Cleanup PHP session files...
         Starting Set console font and keymap...
         Starting Armbian ZRAM config...
         Starting Preprocess NFS configuration...
         Starting Raise network interfaces...
         Starting folder2ram systemd service...
[  OK  ] Started Cleanup monit state file.
[  OK  ] Started Cleanup PHP session files.
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Preprocess NFS configuration.
         Starting NFSv4 ID-name mapping service...
[  OK  ] Reached target NFS client services.
[  OK  ] Started NFSv4 ID-name mapping service.
[   53.355173] zram: Added device: zram0
[   53.356163] zram: Added device: zram1
[   53.357036] zram: Added device: zram2
[   53.480829] zram0: detected capacity change from 0 to 1991770112
[   53.554028] Adding 1945084k swap on /dev/zram0.  Priority:5 extents:1 across:1945084k SSFS
[  113.557886] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  113.558444] rcu:     0-...0: (1 GPs behind) idle=376/1/0x4000000000000000 softirq=2672/2673 fqs=7501
[  113.559235] rcu:     5-...0: (0 ticks this GP) idle=476/1/0x4000000000000000 softirq=4866/4866 fqs=7501
[  113.560046]  (detected by 3, t=15002 jiffies, g=3093, q=116)
DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80005
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5b60
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Mar 08 2021 - 14:54:58 +0000)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
238 bytes read in 4 ms (57.6 KiB/s)
15761964 bytes read in 671 ms (22.4 MiB/s)
28582400 bytes read in 1211 ms (22.5 MiB/s)
81913 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 7 ms (376 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3de0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    15761900 Bytes = 15 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fe7000, end f5eef1ec ... OK
   Loading Device Tree to 00000000f4f6a000, end 00000000f4fe6fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.21-rockchip64 (root@hirsute) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021
[    0.000000] Machine model: Helios64
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 128 MiB at 0x00000000ecc00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 4088 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261632 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11776 pages used for memmap
[    0.000000]   DMA32 zone: 753664 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 32 pages/cpu s94040 r8192 d28840 u131072
[    0.000000] pcpu-alloc: s94040 r8192 d28840 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=c559a861-be25-4b41-a161-d0c3d75c0089 rootwait rootfstype=ext4 console=ttyS2,1500000  consoleblank=0 loglevel=7 ubootpart=559a8d18-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[    0.000000] Memory: 3739356K/4061184K available (14848K kernel code, 2632K rwdata, 5972K rodata, 4352K init, 580K bss, 190756K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @40100000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000400d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000400e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001517] Console: colour dummy device 80x25
[    0.001661] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001687] pid_max: default: 32768 minimum: 301
[    0.001856] LSM: Security Framework initializing
[    0.001903] Yama: becoming mindful.
[    0.002053] AppArmor: AppArmor initialized
[    0.002160] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002197] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005911] rcu: Hierarchical SRCU implementation.
[    0.007101] Platform MSI: interrupt-controller@fee20000 domain created
[    0.007768] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.010320] EFI services will not be available.
[    0.011043] smp: Bringing up secondary CPUs ...
[    0.012224] Detected VIPT I-cache on CPU1
[    0.012274] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012294] GICv3: CPU1: using allocated LPI pending table @0x00000000400f0000
[    0.012372] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013801] Detected VIPT I-cache on CPU2
[    0.013850] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013871] GICv3: CPU2: using allocated LPI pending table @0x0000000040180000
[    0.013947] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.015402] Detected VIPT I-cache on CPU3
[    0.015449] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.015470] GICv3: CPU3: using allocated LPI pending table @0x0000000040190000
[    0.015545] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.016973] CPU features: detected: Spectre-v2
[    0.016980] CPU features: detected: Spectre-v4
[    0.016985] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.016993] Detected PIPT I-cache on CPU4
[    0.017031] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.017046] GICv3: CPU4: using allocated LPI pending table @0x00000000401a0000
[    0.017094] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.018360] Detected PIPT I-cache on CPU5
[    0.018400] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.018416] GICv3: CPU5: using allocated LPI pending table @0x00000000401b0000
[    0.018465] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.018650] smp: Brought up 1 node, 6 CPUs
[    0.018762] SMP: Total of 6 processors activated.
[    0.018777] CPU features: detected: 32-bit EL0 Support
[    0.018792] CPU features: detected: CRC32 instructions
[    0.018806] CPU features: detected: 32-bit EL1 Support
[    0.045593] CPU: All CPU(s) started at EL2
[    0.045675] alternatives: patching kernel code
[    0.049465] devtmpfs: initialized
[    0.066186] Registered cp15_barrier emulation handler
[    0.066216] Registered setend emulation handler
[    0.066458] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.066538] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.069546] pinctrl core: initialized pinctrl subsystem
[    0.070223] Dsb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.964384] usb usb3: Product: xHCI Host Controller
[    2.964820] usb usb3: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[    2.965389] usb usb3: SerialNumber: xhci-hcd.0.auto
[    2.966403] hub 3-0:1.0: USB hub found
[    2.966784] hub 3-0:1.0: 1 port detected
[    2.967479] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.967976] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    2.968660] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    2.969313] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.970187] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.970917] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.971554] usb usb4: Product: xHCI Host Controller
[    2.971988] usb usb4: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[    2.972557] usb usb4: SerialNumber: xhci-hcd.0.auto
[    2.973497] hub 4-0:1.0: USB hub found
[    2.973920] hub 4-0:1.0: 1 port detected
[    2.974750] usbcore: registered new interface driver usb-storage
[    2.978030] mousedev: PS/2 mouse device common for all mice
[    2.979975] i2c /dev entries driver
[    2.984412] pca953x 2-0020: using no AI
[    2.995830] rk808 0-001b: chip id: 0x0
[    3.000520] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.001092] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.001643] rk808-regulator rk808-regulator: max buck steps per change: 4
[    3.003427] vdd_center: supplied by vcc5v0_sys
[    3.004477] vdd_cpu_l: supplied by vcc5v0_sys
[    3.005211] vcc_ddr_s3: supplied by vcc5v0_sys
[    3.006267] vcc1v8_sys_s3: supplied by vcc5v0_sys
[    3.007357] vcc1v8_dvp: supplied by vcc5v0_sys
[    3.008238] vcc3v0_touch: supplied by vcc5v0_sys
[    3.010021] vcc1v8_s3: supplied by vcc5v0_sys
[    3.010694] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
[    3.012414] vcc_sdio_s0: supplied by vcc5v0_sys
[    3.013321] vcca3v0_codec: supplied by vcc5v0_sys
[    3.014947] vcc1v5_s3: supplied by vcc5v0_sys
[    3.015858] vcca1v8_codec: supplied by vcc5v0_sys
[    3.017469] vcc3v0_s3: supplied by vcc5v0_sys
[    3.018030] vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER
[    3.018661] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
[    3.019675] vcc3v3_s0: supplied by vcc3v3_sys_s3
[    3.023794] rk808-rtc rk808-rtc: registered as rtc0
[    3.024791] rk808-rtc rk808-rtc: setting system clock to 2021-03-10T11:15:15 UTC (1615374915)
[    3.028670] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.030739] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    3.031282] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    3.031812] vdd_cpu_b: supplied by vcc5v0_sys
[    3.035324] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.036374] random: fast init done
[    3.037778] vdd_gpu: supplied by vcc5v0_sys
[    3.045981] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    3.048546] sdhci: Secure Digital Host Controller Interface driver
[    3.049095] sdhci: Copyright(c) Pierre Ossman
[    3.049505] Synopsys Designware Multimedia Card Interface Driver
[    3.051430] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.052259] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    3.052922] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    3.053520] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    3.054164] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo
[    3.055135] mmc2: CQHCI version 5.10
[    3.055707] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    3.056975] ledtrig-cpu: registered to indicate activity on CPUs
[    3.058740] hid: raw HID events driver (C) Jiri Kosina
[    3.059345] usbcore: registered new interface d
                                                  [    3.192879] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.228029] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    3.228684] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    3.229441] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    3.287121] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    3.287712] pci_bus 0000:00: root bus resource [bus 00-1f]
[    3.288202] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    3.288813] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    3.289701] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[    3.290403] pci 0000:00:00.0: supports D1
[    3.290721] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    3.290771] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    3.292991] dwmmc_rockchip fe320000.mmc: All phases bad!
[    3.293471] mmc1: tuning execution failed: -5
[    3.298055] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.299002] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[    3.299597] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    3.300222] pci 0000:01:00.0: reg 0x10: [io  size 0x0080]
[    3.300729] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    3.301352] pci 0000:01:00.0: reg 0x14: [io  size 0x0080]
[    3.301876] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    3.302498] pci 0000:01:00.0: reg 0x18: [io  size 0x0080]
[    3.303006] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    3.303628] pci 0000:01:00.0: reg 0x1c: [io  size 0x0080]
[    3.304135] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    3.304756] pci 0000:01:00.0: reg 0x20: [io  size 0x0080]
[    3.305263] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[    3.305858] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.306482] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[    3.307450] pci 0000:01:00.0: PME# supported from D3hot
[    3.308152] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    3.309904] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.315842] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[    3.316451] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[    3.317067] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    3.317708] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    3.318336] pci 0000:01:00.0: BAR 0: no space for [io  size 0x0080]
[    3.318891] pci 0000:01:00.0: BAR 0: failed to assign [io  size 0x0080]
[    3.319475] pci 0000:01:00.0: BAR 1: no space for [io  size 0x0080]
[    3.320030] pci 0000:01:00.0: BAR 1: failed to assign [io  size 0x0080]
[    3.320614] pci 0000:01:00.0: BAR 2: no space for [io  size 0x0080]
[    3.321168] pci 0000:01:00.0: BAR 2: failed to assign [io  size 0x0080]
[    3.321721] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.321756] pci 0000:01:00.0: BAR 3: no space for [io  size 0x0080]
[    3.323127] pci 0000:01:00.0: BAR 3: failed to assign [io  size 0x0080]
[    3.323712] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0080]
[    3.324267] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0080]
[    3.324854] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.325301] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    3.326147] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    3.327007] pcieport 0000:00:00.0: PME: Signaling with IRQ 90
[    3.327856] pcieport 0000:00:00.0: AER: enabled with IRQ 90
[    3.328687] ahci 0000:01:00.0: version 3.0
[    3.329074] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.330234] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.330913] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    3.331638] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    3.335959] scsi host0: ahci
[    3.336910] scsi host1: ahci
[    3.337854] scsi host2: ahci
[    3.338687] scsi host3: ahci
[    3.339573] scsi host4: ahci
[    3.340057] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 91
[    3.340714] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 92
[    3.341369] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 93
[    3.342048] ata4: SATA max UDMA/133
                                       [    3.513601] hub 3-1:1.0: USB hub found
[    3.514190] hub 3-1:1.0: 4 ports detected
[    3.608289] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.726486] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[    3.727212] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.727842] usb 4-1: Product: USB3.0 Hub
[    3.728292] usb 4-1: Manufacturer: VIA Labs, Inc.
[    3.753637] hub 4-1:1.0: USB hub found
[    3.754130] hub 4-1:1.0: 4 ports detected
[    4.409939] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.430931] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[    4.431670] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.432315] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[    4.432772] usb 4-1.4: Manufacturer: Realtek
[    4.433154] usb 4-1.4: SerialNumber: 000000001
[   12.033876] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.102987] ata1.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   12.103595] ata1.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   12.114459] ata1.00: configured for UDMA/133
[   12.115497] scsi 0:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   12.117577] sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   12.118310] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   12.118847] sd 0:0:0:0: [sda] Write Protect is off
[   12.119286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.119852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.168273]  sda: sda1 sda9
[   12.171544] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.773854] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.849243] ata2.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   12.849874] ata2.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   12.860595] ata2.00: configured for UDMA/133
[   12.861606] scsi 1:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   12.863682] sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   12.864384] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   12.864915] sd 1:0:0:0: [sdb] Write Protect is off
[   12.865353] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   12.865953] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.910802]  sdb: sdb1 sdb9
[   12.914099] sd 1:0:0:0: [sdb] Attached SCSI disk
[   13.457848] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.477268] ata3.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.477890] ata3.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.488626] ata3.00: configured for UDMA/133
[   13.489590] scsi 2:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.491692] sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.492395] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   13.492929] sd 2:0:0:0: [sdc] Write Protect is off
[   13.493367] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   13.493973] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.534289]  sdc: sdc1 sdc9
[   13.537433] sd 2:0:0:0: [sdc] Attached SCSI disk
[   14.145848] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.197089] ata4.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   14.197691] ata4.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   14.208376] ata4.00: configured for UDMA/133
[   14.209318] scsi 3:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   14.211462] sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   14.212164] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   14.212698] sd 3:0:0:0: [sdd] Write Protect is off
[   14.213136] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   14.213701] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.264663]  sdd: sdd1 sdd9
[   14.267871] sd 3:0:0:0: [sdd] Attached SCSI disk
[   14.524271] ata5: SATA link down (SStatus 0 SControl 300)
[   14.527943] Freeing unused kernel memory: 4352K
[   14.528527] Run /init as init process
[   14.528863]   with arguments:
[   14.529133]     /init
[   14.529344]     earlyprintk
[   14.529598]   with environment:
[   14.529922]     HOME=/
[   14.530141]     TERM=linux
[   14.530390]     ubootpart=559a8d18-01
[   14.530720]     cgroup_enable=memory
[   14.531043]     cgroup_memory=1
Loading, please wait...
Starting version 241
[   15.185243] input: adc-keys as /devices/platform/adc-keys/input/input1
[   15.294972] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   15.295582] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   15.296350] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   15.297271] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   15.298121] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   15.298638] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[   15.299256] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   15.299944] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   15.300566] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   15.306141] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   15.309331] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   15.310003] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[   15.310471] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   15.311133] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   15.311793] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   15.312443] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   15.313070] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   15.313747] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   15.314304] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   15.314824] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   15.446903] libphy: stmmac: probed
[   15.447235] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   15.448337] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Begin: Loading essential drivers ... [   15.727437] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[   16.021782] random: crng init done
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
/dev/mmcblk1p1: recovering journal
/dev/mmcblk1p1: clean, 103923/2212736 files, 755762/7709728 blocks
done.
[   16.495945] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... /scripts/local-bottom/mdadm: 2: /scripts/local-bottom/mdadm: rm: not found
done.
Begin: Running /scripts/init-bottom ... done.
[   17.460924] systemd[1]: Inserted module 'autofs4'
[   17.528411] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   17.531308] systemd[1]: Detected architecture arm64.

Welcome to Armbian 21.02.3 Buster!

[   17.580730] systemd[1]: Set hostname to <helios64-archive.home>.
[   18.730163] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[   18.749925] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[   18.752922] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[   18.879402] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[   19.018564] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[   19.030525] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[   19.041994] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
         Starting Availability of block devices...
         Starting Load Kernel Modules...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[   19.110178] lm75 2-004c: supply vs not found, using dummy regulator
[   19.111435] lm75 2-004c: hwmon4: sensor 'lm75'
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Reached target Slices.
         Mounting RPC Pipe File System...
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on udev Kernel Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
         Starting Nameserver information manager...
         Starting Create list of re…odes for the current kernel...
[  OK  ] Listening on RPCbind Server Activation Socket.
[   19.296618] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
[   19.312410] RPC: Registered named UNIX socket transport module.
[   19.312944] RPC: Registered udp transport module.
[   19.313364] RPC: Registered tcp transport module.
[   19.313782] RPC: Registered tcp NFSv4.1 backchannel transport module.
         Mounting Huge Pages File System...
         Mounting Kernel Debug File System...
[  OK  ] Listening on LVM2 poll daemon socket.
[  OK  ] Reached target Swap.
         Mounting POSIX Message Queue File System...
[  OK  ] Listening on Journal Socket (/dev/log).
         Mounting NFSD configuration filesystem...
         Starting Monitoring of LVM…meventd or progress polling...
         Starting Set the console keyboard layout...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Availability of block devices.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[   19.533238] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Started Nameserver information manager.
         Starting Create System Users...
         Starting Load/Save Random Seed...
         Starting pNFS block layout mapping daemon...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
[  OK  ] Started Monitoring of LVM2… dmeventd or progress polling.
[  OK  ] Started Create System Users.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started pNFS block layout mapping daemon.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting Mount /tmp as tmp…e access to the root device...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted Mount /tmp as tmpf…ite access to the root device.
[  OK  ] Started udev Coldplug all Devices.
         Starting udev Wait for Complete Device Initialization...
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Started Helper to synchronize boot up for ifupdown.
[  OK  ] Started udev Kernel Device Manager.
         Starting Network Service...
[  OK  ] Started Network Service.
[   20.452029] input: beeper as /devices/platform/beeper/input/input2
         Starting Wait for Network to be Configured...
[  OK  ] Found device /dev/ttyS2.
[   20.539827] mc: Linux media interface: v0.10
[   20.604619] videodev: Linux video capture interface: v2.00
[   20.623421] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.624357] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   20.625017] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   20.628114] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   20.671410] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[   20.708721] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[   20.713450] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   20.714185] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[   20.715050] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000010002010010
[   20.715899] xhci-hcd xhci-hcd.2.auto: irq 75, io mem 0xfe800000
[   20.716810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   20.717544] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.717568] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[   20.718203] usb usb5: Product: xHCI Host Controller
[   20.719512] usb usb5: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.720080] usb usb5: SerialNumber: xhci-hcd.2.auto
[   20.723500] rkvdec ff660000.video-codec: Adding to iommu group 1
[   20.725331] hub 5-0:1.0: USB hub found
[   20.725734] hub 5-0:1.0: 1 port detected
[   20.726603] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[   20.727108] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[   20.727796] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[   20.728463] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   20.729328] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   20.730090] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.730732] usb usb6: Product: xHCI Host Controller
[   20.731166] usb usb6: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.731733] usb usb6: SerialNumber: xhci-hcd.2.auto
[   20.732809] hub 6-0:1.0: USB hub found
[   20.733192] hub 6-0:1.0: 1 port detected
[   20.742097] rockchip-rga ff680000.rga: HW Version: 0x03.02
[   20.743232] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video1
[   20.743798] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[   20.747277] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[   20.748720] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[   20.749003] panfrost ff9a0000.gpu: clock rate = 500000000
[   20.749724] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
[   20.774574] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[   20.775924] rockchip-vop ff900000.vop: Adding to iommu group 3
[   20.775959] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   20.777127] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   20.777872] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   20.778905] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   20.783735] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[   20.783861] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   20.785373] [drm] unsupported AFBC format[3231564e]
[   20.787885] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   20.789309] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[   20.790799] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[   20.793044] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   20.806687] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   21.011893] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   21.180595] spl: loading out-of-tree module taints kernel.
[   21.180659] spl: loading out-of-tree module taints kernel.
[   21.180700] spl: loading out-of-tree module taints kernel.
[   21.181160] spl: module verification failed: signature and/or required key missing - tainting kernel
[   21.212030] icp: module license 'CDDL' taints kernel.
[   21.212040] icp: module license 'CDDL' taints kernel.
[   21.212048] Disabling lock debugging due to kernel taint
[   21.212052] icp: module license 'CDDL' taints kernel.
[   21.241681] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   21.258289] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   21.382398] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[   21.398103] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
[   21.398604] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
[   21.398604]          US6,570,884, US6,115,776, and US6,327,625.
[   21.398604]
[   21.400354] usbcore: registered new interface driver r8152
[   21.635228] ZFS: Loaded module v2.0.1-1, ZFS pool version 5000, ZFS filesystem version 5
[  OK  ] Started udev Wait for Complete Device Initialization.
[   21.794104] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
         Starting Install ZFS kernel module...
[  OK  ] Started Install ZFS kernel module.
         Starting Import ZFS pools by cache file...
[   22.155366] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[ ***  ] (2 of 2) A start job is running for…ols by cache file (14s / no limit)
[  *** ] (2 of 2) A start job is running for…ols by cache file (33s / no limit)
[  OK  ] Started Import ZFS pools by cache file.
[   53.391364] systemd[1]: Reached target ZFS pool import target.
[  OK  ] Reached target ZFS pool import target.
[   53.408588] systemd[1]: Starting Wait for ZFS Volume (zvol) links in /dev...
         Starting Wait for ZFS Volume (zvol) links in /dev...
[   53.427907] systemd[1]: Starting Mount ZFS filesystems...
         Starting Mount ZFS filesystems...
[   53.521953] systemd[1]: Started Wait for ZFS Volume (zvol) links in /dev.
[  OK  ] Started Wait for ZFS Volume (zvol) links in /dev.
[   53.540313] systemd[1]: Reached target ZFS volumes are ready.
[  OK  ] Reached target ZFS volumes are ready.
[   53.652099] systemd[1]: Started Mount ZFS filesystems.
[  OK  ] Started Mount ZFS filesystems.
[   53.654143] systemd[1]: Reached target Local File Systems.
[  OK  ] Reached target Local File Systems.
[   53.670421] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
[   53.675998] systemd[1]: Starting Preprocess NFS configuration...
         Starting Preprocess NFS configuration...
         Starting Raise network interfaces...
         Starting folder2ram systemd service...
         Starting Set console font and keymap...
         Starting Cleanup monit state file...
         Starting Cleanup PHP session files...
         Starting Armbian ZRAM config...
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Started Set console font and keymap.
[  113.817813] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  113.818374] rcu:     2-...!: (0 ticks this GP) idle=d12/1/0x4000000000000000 softirq=2636/2636 fqs=1
[  113.819160]  (detected by 0, t=15002 jiffies, g=2893, q=591)

 

[Kernel panic in 5.9.14 20.11.10]

@gprovost I started with a clean install and it crashed on the second boot

 

Quote

root@helios64:/usr/src# [ 2364.037435] reboot: Restarting system
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 323
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80224
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5b60
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Mar 08 2021 - 14:54:58 +0000)

SoC: Rockchip rk3399
Reset cause: unknown reset
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
239 bytes read in 5 ms (45.9 KiB/s)
15761964 bytes read in 671 ms (22.4 MiB/s)
28582400 bytes read in 1212 ms (22.5 MiB/s)
81913 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 7 ms (376 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3de0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    15761900 Bytes = 15 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fe7000, end f5eef1ec ... OK
   Loading Device Tree to 00000000f4f6a000, end 00000000f4fe6fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.21-rockchip64 (root@hirsute) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021
[    0.000000] Machine model: Helios64
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 128 MiB at 0x00000000ecc00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 4088 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261632 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11776 pages used for memmap
[    0.000000]   DMA32 zone: 753664 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 32 pages/cpu s94040 r8192 d28840 u131072
[    0.000000] pcpu-alloc: s94040 r8192 d28840 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=c559a861-be25-4b41-a161-d0c3d75c0089 rootwait rootfstype=ext4 console=ttyS2,1500000  consoleblank=0 loglevel=7 ubootpart=559a8d18-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[    0.000000] Memory: 3739356K/4061184K available (14848K kernel code, 2632K rwdata, 5972K rodata, 4352K init, 580K bss, 190756K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @40100000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000400d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000400e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001524] Console: colour dummy device 80x25
[    0.001667] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001692] pid_max: default: 32768 minimum: 301
[    0.001863] LSM: Security Framework initializing
[    0.001910] Yama: becoming mindful.
[    0.002060] AppArmor: AppArmor initialized
[    0.002169] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002206] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005936] rcu: Hierarchical SRCU implementation.
[    0.007138] Platform MSI: interrupt-controller@fee20000 domain created
[    0.007809] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.010351] EFI services will not be available.
[    0.011075] smp: Bringing up secondary CPUs ...
[    0.012248] Detected VIPT I-cache on CPU1
[    0.012297] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012316] GICv3: CPU1: using allocated LPI pending table @0x00000000400f0000
[    0.012394] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013822] Detected VIPT I-cache on CPU2
[    0.013871] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013891] GICv3: CPU2: using allocated LPI pending table @0x0000000040180000
[    0.013969] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.015426] Detected VIPT I-cache on CPU3
[    0.015476] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.015496] GICv3: CPU3: using allocated LPI pending table @0x0000000040190000
[    0.015573] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.017000] CPU features: detected: Spectre-v2
[    0.017008] CPU features: detected: Spectre-v4
[    0.017013] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.017021] Detected PIPT I-cache on CPU4
[    0.017058] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.017074] GICv3: CPU4: using allocated LPI pending table @0x00000000401a0000
[    0.017122] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.018390] Detected PIPT I-cache on CPU5
[    0.018428] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.018443] GICv3: CPU5: using allocated LPI pending table @0x00000000401b0000
[    0.018493] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.018689] smp: Brought up 1 node, 6 CPUs
[    0.018800] SMP: Total of 6 processors activated.
[    0.018816] CPU features: detected: 32-bit EL0 Support
[    0.018831] CPU features: detected: CRC32 instructions
[    0.018845] CPU features: detected: 32-bit EL1 Support
[    0.045641] CPU: All CPU(s) started at EL2
[    0.045723] alternatives: patching kernel code
[    0.049507] devtmpfs: initialized
[    0.066223] Registered cp15_barrier emulation handler
[    0.066254] Registered setend emulation handler
[    0.066496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.066574] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.069593] pinctrl core: initialized pinctrl subsystem
[    0.070271] D
                [    2.973586] hub 4-0:1.0: USB hub found
[    2.974010] hub 4-0:1.0: 1 port detected
[    2.974843] usbcore: registered new interface driver usb-storage
[    2.978120] mousedev: PS/2 mouse device common for all mice
[    2.980065] i2c /dev entries driver
[    2.984491] pca953x 2-0020: using no AI
[    2.995085] rk808 0-001b: chip id: 0x0
[    2.999340] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.999912] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.000461] rk808-regulator rk808-regulator: max buck steps per change: 4
[    3.002229] vdd_center: supplied by vcc5v0_sys
[    3.003283] vdd_cpu_l: supplied by vcc5v0_sys
[    3.004019] vcc_ddr_s3: supplied by vcc5v0_sys
[    3.005073] vcc1v8_sys_s3: supplied by vcc5v0_sys
[    3.006165] vcc1v8_dvp: supplied by vcc5v0_sys
[    3.007048] vcc3v0_touch: supplied by vcc5v0_sys
[    3.008797] vcc1v8_s3: supplied by vcc5v0_sys
[    3.009469] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
[    3.011213] vcc_sdio_s0: supplied by vcc5v0_sys
[    3.012120] vcca3v0_codec: supplied by vcc5v0_sys
[    3.013722] vcc1v5_s3: supplied by vcc5v0_sys
[    3.014656] vcca1v8_codec: supplied by vcc5v0_sys
[    3.016272] vcc3v0_s3: supplied by vcc5v0_sys
[    3.016809] vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER
[    3.017439] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
[    3.018481] vcc3v3_s0: supplied by vcc3v3_sys_s3
[    3.022605] rk808-rtc rk808-rtc: registered as rtc0
[    3.023604] rk808-rtc rk808-rtc: setting system clock to 2021-03-10T11:07:27 UTC (1615374447)
[    3.027503] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.029360] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    3.029969] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    3.030523] vdd_cpu_b: supplied by vcc5v0_sys
[    3.033916] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.035784] vdd_gpu: supplied by vcc5v0_sys
[    3.043886] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    3.046572] sdhci: Secure Digital Host Controller Interface driver
[    3.047121] sdhci: Copyright(c) Pierre Ossman
[    3.047539] Synopsys Designware Multimedia Card Interface Driver
[    3.049424] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.049899] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    3.050571] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    3.051166] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    3.051733] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo
[    3.053152] mmc2: CQHCI version 5.10
[    3.053179] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    3.054732] ledtrig-cpu: registered to indicate activity on CPUs
[    3.056460] hid: raw HID events driver (C) Jiri Kosina
[    3.057048] usbcore: registered new interface driver usbhid
[    3.057541] usbhid: USB HID core driver
[    3.064233] drop_monitor: Initializing network drop monitor service
[    3.065623] NET: Registered protocol family 10
[    3.067044] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.079975] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    3.081839] random: fast init done
[    3.123736] Segment Routing with IPv6
[    3.124157] NET: Registered protocol family 17
[    3.124716] 8021q: 802.1Q VLAN Support v1.8
[    3.125159] Key type dns_resolver registered
[    3.126138] registered taskstats version 1
[    3.126514] Loading compiled-in X.509 certificates
[    3.130527] Loaded X.509 cert 'Build time autogenerated kernel key: 98b5fbd0004968eadd44123544af94c22f57c8e4'
[    3.137778] zswap: loaded using pool zstd/z3fold
[    3.138651] Key type ._fscrypt registered
[    3.139012] Key type
                       [    3.224615] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    3.225271] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    3.226070] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    3.283163] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    3.283756] pci_bus 0000:00: root bus resource [bus 00-1f]
[    3.284246] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    3.284856] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    3.285743] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[    3.286444] pci 0000:00:00.0: supports D1
[    3.286805] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    3.290638] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    3.292531] dwmmc_rockchip fe320000.mmc: All phases bad!
[    3.293010] mmc1: tuning execution failed: -5
[    3.293210] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.294357] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[    3.294954] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    3.295578] pci 0000:01:00.0: reg 0x10: [io  size 0x0080]
[    3.296086] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    3.296708] pci 0000:01:00.0: reg 0x14: [io  size 0x0080]
[    3.297216] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    3.297839] pci 0000:01:00.0: reg 0x18: [io  size 0x0080]
[    3.298363] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    3.298985] pci 0000:01:00.0: reg 0x1c: [io  size 0x0080]
[    3.299491] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    3.300113] pci 0000:01:00.0: reg 0x20: [io  size 0x0080]
[    3.300621] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[    3.301203] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.301826] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[    3.302807] pci 0000:01:00.0: PME# supported from D3hot
[    3.303526] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    3.305928] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.310526] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[    3.311137] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[    3.311753] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    3.312393] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    3.313006] pci 0000:01:00.0: BAR 0: no space for [io  size 0x0080]
[    3.313560] pci 0000:01:00.0: BAR 0: failed to assign [io  size 0x0080]
[    3.314160] pci 0000:01:00.0: BAR 1: no space for [io  size 0x0080]
[    3.314714] pci 0000:01:00.0: BAR 1: failed to assign [io  size 0x0080]
[    3.315298] pci 0000:01:00.0: BAR 2: no space for [io  size 0x0080]
[    3.315853] pci 0000:01:00.0: BAR 2: failed to assign [io  size 0x0080]
[    3.316436] pci 0000:01:00.0: BAR 3: no space for [io  size 0x0080]
[    3.316990] pci 0000:01:00.0: BAR 3: failed to assign [io  size 0x0080]
[    3.317573] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0080]
[    3.318140] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0080]
[    3.318728] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.319175] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    3.320003] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    3.320867] pcieport 0000:00:00.0: PME: Signaling with IRQ 90
[    3.321239] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.321716] pcieport 0000:00:00.0: AER: enabled with IRQ 90
[    3.323027] ahci 0000:01:00.0: version 3.0
[    3.323414] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.324527] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.325206] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    3.325951] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    3.330459] scsi host0: ahci
[    3.331492] scsi host1: ahci
[    3.332382] scsi host2: ahci
[    3.333289] scsi host3: ahci
[    3.334241] scsi host4: ahci
[    3.334725] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 91
[    3.335381] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 92
[    3.336036] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 93
[    3.336689] ata4: SATA max UDMA/133
                                       [    3.513730] hub 3-1:1.0: USB hub found
[    3.514326] hub 3-1:1.0: 4 ports detected
[    3.608402] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.726641] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[    3.727367] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.727998] usb 4-1: Product: USB3.0 Hub
[    3.728447] usb 4-1: Manufacturer: VIA Labs, Inc.
[    3.753626] hub 4-1:1.0: USB hub found
[    3.754118] hub 4-1:1.0: 4 ports detected
[    4.409996] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.431015] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[    4.431754] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.432401] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[    4.432859] usb 4-1.4: Manufacturer: Realtek
[    4.433240] usb 4-1.4: SerialNumber: 000000001
[   11.729949] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   11.808574] ata1.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   11.809182] ata1.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   11.820003] ata1.00: configured for UDMA/133
[   11.820837] scsi 0:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   11.822879] sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   11.823581] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   11.824125] sd 0:0:0:0: [sda] Write Protect is off
[   11.824562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.825145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.873965]  sda: sda1 sda9
[   11.877143] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.477951] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.555883] ata2.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   12.556492] ata2.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   12.567234] ata2.00: configured for UDMA/133
[   12.568173] scsi 1:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   12.570272] sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   12.570973] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   12.571505] sd 1:0:0:0: [sdb] Write Protect is off
[   12.571943] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   12.572507] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.617370]  sdb: sdb1 sdb9
[   12.620574] sd 1:0:0:0: [sdb] Attached SCSI disk
[   13.165945] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.187308] ata3.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.187915] ata3.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.198672] ata3.00: configured for UDMA/133
[   13.199640] scsi 2:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.201727] sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.202466] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   13.203000] sd 2:0:0:0: [sdc] Write Protect is off
[   13.203438] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   13.204003] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.244245]  sdc: sdc1 sdc9
[   13.246586] sd 2:0:0:0: [sdc] Attached SCSI disk
[   13.797942] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.820705] ata4.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.821312] ata4.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.832097] ata4.00: configured for UDMA/133
[   13.832865] scsi 3:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.834772] sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.835474] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   13.836007] sd 3:0:0:0: [sdd] Write Protect is off
[   13.836444] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   13.837011] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.893427]  sdd: sdd1 sdd9
[   13.895638] sd 3:0:0:0: [sdd] Attached SCSI disk
[   14.148588] ata5: SATA link down (SStatus 0 SControl 300)
[   14.152099] Freeing unused kernel memory: 4352K
[   14.152664] Run /init as init process
[   14.153000]   with arguments:
[   14.153271]     /init
[   14.153481]     earlyprintk
[   14.153735]   with environment:
[   14.154049]     HOME=/
[   14.154267]     TERM=linux
[   14.154515]     ubootpart=559a8d18-01
[   14.154846]     cgroup_enable=memory
[   14.155168]     cgroup_memory=1
Loading, please wait...
Starting version 241
[   14.838015] input: adc-keys as /devices/platform/adc-keys/input/input1
[   14.967490] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   14.968106] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   14.968926] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   14.971392] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   14.972042] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   14.972553] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[   14.973789] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   14.975171] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   14.975816] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   14.981532] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   14.985056] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   14.985807] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[   14.986550] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   14.987228] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   14.987897] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   14.988471] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   14.989105] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   14.989995] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   14.990538] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   14.991062] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   15.138606] libphy: stmmac: probed
[   15.139044] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   15.140240] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Begin: Loading essential drivers ... [   15.364910] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[   15.668210] random: crng init done
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
/dev/mmcblk1p1: clean, 103924/2212736 files, 755764/7709728 blocks
done.
[   15.895923] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... /scripts/local-bottom/mdadm: 2: /scripts/local-bottom/mdadm: rm: not found
done.
Begin: Running /scripts/init-bottom ... done.
[   16.910411] systemd[1]: Inserted module 'autofs4'
[   16.978251] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   16.981044] systemd[1]: Detected architecture arm64.

Welcome to Armbian 21.02.3 Buster!

[   17.021760] systemd[1]: Set hostname to <helios64-archive.home>.
[   18.233090] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[   18.254671] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[   18.258079] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[   18.396385] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[   18.542402] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[   18.554599] systemd[1]: Listening on LVM2 poll daemon socket.
[  OK  ] Listening on LVM2 poll daemon socket.
[   18.566063] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Swap.
[  OK  ] Listening on Journal Socket.
         Starting Nameserver information manager...
         Mounting POSIX Message Queue File System...
         Starting Create list of re…odes for the current kernel...
         Starting Availability of block devices...
         Mounting Kernel Debug File System...
         Mounting Huge Pages File System...
         Starting Monitoring of LVM…meventd or progress polling...
         Starting Remount Root and Kernel File Systems...
         Mounting RPC Pipe File System...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Set the console keyboard layout...
         Starting Load Kernel Modules...
[   18.966672] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
[  OK  ] Reached target Paths.
         Mounting NFSD configuration filesystem...
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Started Availability of block devices.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Huge Pages File System.
[   19.065200] lm75 2-004c: supply vs not found, using dummy regulator
[  OK  ] Started Remount Root and Kernel File Systems.
[   19.066958] lm75 2-004c: hwmon4: sensor 'lm75'
[  OK  ] Started Nameserver information manager.
[   19.088106] RPC: Registered named UNIX socket transport module.
[   19.088641] RPC: Registered udp transport module.
[   19.089061] RPC: Registered tcp transport module.
[   19.089479] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Started Monitoring of LVM2… dmeventd or progress polling.
[  OK  ] Started Load Kernel Modules.
         Mounting Kernel Configuration File System...
         Mounting FUSE Control File System...
         Starting Apply Kernel Variables...
         Starting pNFS block layout mapping daemon...
         Starting Create System Users...
         Starting Load/Save Random Seed...
[   19.260012] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started pNFS block layout mapping daemon.
[  OK  ] Started Create System Users.
[  OK  ] Started Load/Save Random Seed.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting Mount /tmp as tmp…e access to the root device...
[  OK  ] Mounted Mount /tmp as tmpf…ite access to the root device.
[  OK  ] Started udev Kernel Device Manager.
         Starting Network Service...
[  OK  ] Started udev Coldplug all Devices.
         Starting Helper to synchronize boot up for ifupdown...
         Starting udev Wait for Complete Device Initialization...
[  OK  ] Started Helper to synchronize boot up for ifupdown.
[  OK  ] Started Network Service.
         Starting Wait for Network to be Configured...
[   19.974919] input: beeper as /devices/platform/beeper/input/input2
[  OK  ] Found device /dev/ttyS2.
[   20.130057] mc: Linux media interface: v0.10
[   20.175392] videodev: Linux video capture interface: v2.00
[   20.202349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.207895] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   20.210203] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   20.211582] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   20.219807] panfrost ff9a0000.gpu: clock rate = 500000000
[   20.225622] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   20.226226] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[   20.226439] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   20.227611] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   20.228641] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   20.232998] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[   20.242188] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[   20.245857] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[   20.249699] rockchip-vop ff900000.vop: Adding to iommu group 3
[   20.255295] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   20.255824] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5
[   20.256688] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000010002010010
[   20.257548] xhci-hcd xhci-hcd.3.auto: irq 75, io mem 0xfe800000
[   20.258653] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   20.259396] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.260038] usb usb5: Product: xHCI Host Controller
[   20.260475] usb usb5: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.261044] usb usb5: SerialNumber: xhci-hcd.3.auto
[   20.262227] hub 5-0:1.0: USB hub found
[   20.262370] rockchip-rga ff680000.rga: HW Version: 0x03.02
[   20.262628] hub 5-0:1.0: 1 port detected
[   20.263503] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[   20.264236] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   20.264740] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 6
[   20.265427] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[   20.267143] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   20.267919] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   20.268812] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   20.269549] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   20.270227] usb usb6: Product: xHCI Host Controller
[   20.270601] [drm] unsupported AFBC format[3231564e]
[   20.270667] usb usb6: Manufacturer: Linux 5.10.21-rockchip64 xhci-hcd
[   20.270674] usb usb6: SerialNumber: xhci-hcd.3.auto
[   20.271324] hub 6-0:1.0: USB hub found
[   20.272529] hub 6-0:1.0: 1 port detected
[   20.279092] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   20.280404] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[   20.282105] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[   20.283533] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   20.299262] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   20.311560] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[   20.313446] rkvdec ff660000.video-codec: Adding to iommu group 1
[   20.332730] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[   20.336075] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[   20.343154] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[   20.345164] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
[   20.569001] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   20.698015] spl: loading out-of-tree module taints kernel.
[   20.698019] spl: loading out-of-tree module taints kernel.
[   20.698392] spl: module verification failed: signature and/or required key missing - tainting kernel
[   20.721126] icp: module license 'CDDL' taints kernel.
[   20.721259] icp: module license 'CDDL' taints kernel.
[   20.721263] icp: module license 'CDDL' taints kernel.
[   20.721267] Disabling lock debugging due to kernel taint
[   20.762479] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   20.815290] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   20.902627] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[   20.918306] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
[   20.918792] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
[   20.918792]          US6,570,884, US6,115,776, and US6,327,625.
[   20.918792]
[   20.920626] usbcore: registered new interface driver r8152
[   21.123908] ZFS: Loaded module v2.0.1-1, ZFS pool version 5000, ZFS filesystem version 5
[  OK  ] Started udev Wait for Complete Device Initialization.
         Starting Install ZFS kernel module...
[   21.314154] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[  OK  ] Started Install ZFS kernel module.
         Starting Import ZFS pools by cache file...
[   21.712877] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[***   ] (1 of 2) A start job is running for… to be Configured (15s / no limit)
[   ***] (2 of 2) A start job is running for…ols by cache file (33s / no limit)
[  OK  ] Started Import ZFS pools by cache file.
[   52.827166] systemd[1]: Reached target ZFS pool import target.
[  OK  ] Reached target ZFS pool import target.
[   52.845084] systemd[1]: Starting Wait for ZFS Volume (zvol) links in /dev...
         Starting Wait for ZFS Volume (zvol) links in /dev...
[   52.871453] systemd[1]: Starting Mount ZFS filesystems...
         Starting Mount ZFS filesystems...
[   52.922670] systemd[1]: Started Wait for ZFS Volume (zvol) links in /dev.
[  OK  ] Started Wait for ZFS Volume (zvol) links in /dev.
[   52.934880] systemd[1]: Reached target ZFS volumes are ready.
[  OK  ] Reached target ZFS volumes are ready.
[   53.063912] systemd[1]: Started Mount ZFS filesystems.
[  OK  ] Started Mount ZFS filesystems.
[   53.066410] systemd[1]: Reached target Local File Systems.
[  OK  ] Reached target Local File Systems.
[   53.078262] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
[   53.086943] systemd[1]: Starting Armbian ZRAM config...
         Starting Armbian ZRAM config...
         Starting folder2ram systemd service...
         Starting Cleanup monit state file...
         Starting Raise network interfaces...
         Starting Cleanup PHP session files...
         Starting Set console font and keymap...
         Starting Preprocess NFS configuration...
[  OK  ] Started Cleanup monit state file.
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Started Cleanup PHP session files.
         Starting NFSv4 ID-name mapping service...
[  OK  ] Reached target NFS client services.
[  OK  ] Started NFSv4 ID-name mapping service.
[   53.427252] zram: Added device: zram0
[   53.428187] zram: Added device: zram1
[   53.429178] zram: Added device: zram2
[   53.586179] zram0: detected capacity change from 0 to 1991770112
[   53.677988] Adding 1945084k swap on /dev/zram0.  Priority:5 extents:1 across:1945084k SSFS
[  OK  ] Started Raise network interfaces.
[   53.829290] zram1: detected capacity change from 0 to 52428800
[  OK  ] Started Armbian ZRAM config.
         Starting Armbian memory supported logging...
[   54.011350] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[   54.012006] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[  OK  ] Started folder2ram systemd service.
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Armbian memory supported logging.
         Starting Journal Service...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   56.427750] systemd-journald[2052]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Entropy daemon using the HAVEGE algorithm.
         Starting Network Name Resolution...
         Starting RPC bind portmap service...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Started Trigger anacron every hour.
[  OK  ] Started Clean PHP session files every 30 mins.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Daily rotation of log files.
         Starting Armbian hardware optimization...
         Starting Armbian hardware monitoring...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Started RPC bind portmap service.
[  OK  ] Started Armbian hardware monitoring.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Started Armbian hardware optimization.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
         Starting Login Service...
         Starting fan speed regulator...
         Starting WPA supplicant...
[  OK  ] Started Self Monitoring an…ing Technology (SMART) Daemon.
[  OK  ] Started Run anacron jobs.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Network Manager...
         Starting System Logging Service...
         Starting Dispatcher daemon for systemd-networkd...
         Starting Resets System Activity Data Collector...
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Host and Network Name Lookups.
[   57.527770] Unable to handle kernel paging request at virtual address ffff800015511a9c
[   57.528471] Mem abort info:
[   57.528722]   ESR = 0x86000007
[   57.528995]   EC = 0x21: IABT (current EL), IL = 32 bits
[   57.529463]   SET = 0, FnV = 0
[   57.529735]   EA = 0, S1PTW = 0
[   57.530023] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000003669000
[   57.530611] [ffff800015511a9c] pgd=00000000f7fff003, p4d=00000000f7fff003, pud=00000000f7ffe003, pmd=000000004ae15003, pte=0000000000000000
[   57.531724] Internal error: Oops: 86000007 [#1] PREEMPT SMP
[   57.532217] Modules linked in: zram zfs(POE) zunicode(POE) zzstd(OE) zlua(OE) zcommon(POE) znvpair(POE) zavl(POE) icp(POE) spl(OE) r8152 snd_soc_hdmi_codec snd_soc_rockchip_i2s hantro_vpu(C) leds_pwm snd_soc_core rockchip_vdec(C) snd_pcm_dmaengine v4l2_h264 snd_pcm gpio_charger videobuf2_dma_contig snd_timer rockchip_rga videobuf2_dma_sg v4l2_mem2mem videobuf2_vmalloc rockchipdrm snd videobuf2_memops panfrost dw_mipi_dsi videobuf2_v4l2 dw_hdmi fusb302 sg gpu_sched videobuf2_common tcpm analogix_dp videodev soundcore typec drm_kms_helper mc cec rc_core drm drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl lockd grace ledtrig_netdev lm75 sunrpc ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys pwm_fan
[   57.539202] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.10.21-rockchip64 #21.02.3
[   57.539980] Hardware name: Helios64 (DT)
[   57.540330] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--)
[   57.540863] pc : 0xffff800015511a9c
[   57.541182] lr : debug_smp_processor_id+0x14/0x30
[   57.541597] sp : ffff800011c13ca0
[   57.541891] x29: ffff800011c13ca0 x28: ffff000040311d00
[   57.542366] x27: ffff000040004300 x26: ffff800011cf3de0
[   57.542839] x25: 0000000000000001 x24: 0000000000000000
[   57.543312] x23: 0000000060000085 x22: ffff800011cf3f50
[   57.543785] x21: ffff8000118b99c8 x20: ffff0000f77c8980
[   57.544257] x19: ffff800011580980 x18: 0000000000000000
[   57.544730] x17: 0000000000000000 x16: 0000000000000000
[   57.545207] x15: 00000147d2570b46 x14: 000000000000008b
[   57.545682] x13: 0000000000000006 x12: 0000000000000001
[   57.546158] x11: 0000000000000040 x10: ffff80001194ef28
[   57.546634] x9 : ffff80001194ef20 x8 : ffff000040400270
[   57.547108] x7 : 0000000000000000 x6 : 0000000000000000
[   57.547583] x5 : ffff000040400248 x4 : ffff8000e6248000
[   57.548056] x3 : 0000000000010001 x2 : ffff80001156a000
[   57.548535] x1 : ffff8000112a1000 x0 : 0000000000000003
[   57.549012] Call trace:
[   57.549235]  0xffff800015511a9c
[   57.549519]  rcu_nmi_enter+0x40/0x150
[   57.549847]  rcu_irq_enter+0x10/0x70
[   57.550167]  enter_from_kernel_mode.isra.5+0x28/0x40
[   57.550606]  el1_abort+0x28/0x70
[   57.550895]  el1_sync_handler+0x64/0xe8
[   57.551238]  el1_sync+0x7c/0x100
[   57.551525]  0xffff800011cf3f50
[   57.551809]  generic_smp_call_function_single_interrupt+0x14/0x20
[   57.552347]  ipi_handler+0x7c/0x370
[   57.552661]  handle_percpu_devid_fasteoi_ipi+0x9c/0x1f0
[   57.553123]  generic_handle_irq+0x30/0x48
[   57.553479]  __handle_domain_irq+0x94/0x108
[   57.553854]  gic_handle_irq+0xc0/0x140
[   57.554187]  el1_irq+0xc0/0x180
[   57.554470]  arch_cpu_idle+0x18/0x28
[   57.554799]  do_idle+0x204/0x278
[   57.555089]  cpu_startup_entry+0x28/0x60
[   57.555440]  secondary_start_kernel+0x170/0x180
[   57.555846] Code: bad PC value
[   57.556130] ---[ end trace 294ef7d2162ef754 ]---
[   57.556539] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[   57.557145] SMP: stopping secondary CPUs
[   57.557498] Kernel Offset: disabled
[   57.557809] CPU features: 0x0240022,6100200c
[   57.558185] Memory Limit: none
[   57.558470] Rebooting in 20 seconds..

 

[Automatic reset on kernel panic ?]

and crash on third boot after installing OMV

 

Quote

[   19.255872] mali ff9a0000.gpu: temp=44444, pvtm=121661 (121625 + 36)
[   19.260398] mali ff9a0000.gpu: pvtm-volt-sel=1
[   19.261244] mali ff9a0000.gpu: avs=0
[   19.268262] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[   19.272100] mali ff9a0000.gpu: Protected mode not available
[   19.274416] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   19.275510] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[   19.282384] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[   19.286237] mali ff9a0000.gpu: Probed as mali0
[   19.288815] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   19.289743] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: Failed to create Playback debugfs file
[   19.306941] systemd[1]: Found device /dev/ttyFIQ0.
[   19.469284] usb 4-1.4: reset SuperSpeed USB device number 3 using xhci-hcd
[   19.475150] zram1: detected capacity change from 0 to 52428800
[   19.537757] systemd[1]: Started Armbian ZRAM config.
[   19.600662] netif_napi_add() called with weight 256 on device eth%d
[   19.607932] r8152 4-1.4:1.0 eth1: v2.13.0 (2020/04/20)
[   19.614311] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
[   19.614311]          US6,570,884, US6,115,776, and US6,327,625.
[   19.614311]
[   19.633577] usbcore: registered new interface driver r8152
[   19.750945] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[   19.757989] systemd[1]: Starting Armbian memory supported logging...
[   19.762852] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[   19.767343] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   19.770186] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[   19.772693] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   19.835823] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[   20.600100] cfg80211: World regulatory domain updated:
[   20.608298] cfg80211:  DFS Master region: unset
[   20.608822] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.624848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.633294] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.641842] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.641849] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.641857] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.641863] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.641868] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.641874] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.661541] systemd[1]: Started Set console font and keymap.
[   21.631510] systemd[1]: Started Armbian memory supported logging.
[   21.639940] systemd[1]: Starting Journal Service...
[   21.876138] systemd[1]: Started Journal Service.
[   21.931187] systemd-journald[885]: Received request to flush runtime journal from PID 1
[   22.561894] nr_pdflush_threads exported in /proc is scheduled for removal
[   27.531677] tty_port_close_start: tty->count = 1 port count = 2.
[   27.832346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.879259] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.900235] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   28.442507] NET: Registered protocol family 17

Armbian 21.02.1 Buster ttyFIQ0

helios64 login: [   29.836447] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
root
Password:
Last login: Tue Feb 23 09:27:31 GMT 2021 on ttyFIQ0
 _   _      _ _            __   _  _
| | | | ___| (_) ___  ___ / /_ | || |
| |_| |/ _ \ | |/ _ \/ __| '_ \| || |_
|  _  |  __/ | | (_) \__ \ (_) |__   _|
|_| |_|\___|_|_|\___/|___/\___/   |_|

Welcome to Armbian 21.02.1 Buster with Linux 4.4.213-rk3399

No end-user support: work in progress

System load:   31%              Up time:       0 min
Memory usage:  3% of 3.72G      IP:
CPU temp:      50°C             Usage of /:    5% of 29G

root@helios64:~# hddtemp /dev/sd[a-e]
/dev/sda: WDC WUH721818ALE6L4: 28°C
/dev/sdb: WDC WUH721818ALE6L4: 28°C
/dev/sdc: WDC WUH721818ALE6L4: 28°C
/dev/sdd: WDC WUH721818ALE6L4: 27°C
root@helios64:~# armbian-config
 Configuration utility, Armbian 21.02.1 stable, 195.198.8.121
 ──────────────────────────────────────────────────────────────────────────────

                ┌───────────────Please wait─────────────────┐
                │                                           │
                │ Loading Armbian configuration utility ... │
                │                                           │
                └───────────────────────────────────────────┘

 Configuration utility, Armbian 21.02.1 stable, 195.198.8.121
 ──────────────────────────────────────────────────────────────────────────────
  ┌────────────────────────── armbian-config ─────────────────────────────┐
  │                                                                       │
  │ Configure Debian buster based Armbian for the Helios64                │
  │                                                                       │
  │ SoC runs between 408 and 1800 MHz using ondemand governor.            │
  │                                                                       │
  │ Support: https://forum.armbian.com │
  │                                                                       │
  │ ┌───────────────────────────────────────────────────────────────────┐ │
  │ │        System    System and security settings                     │ │
  │ │        Network   Wired, wireless, Bluetooth, access point         │ │
  │ │        Personal  Timezone, language, hostname                     │ │
  │ │        Software  System and 3rd party software install            │ │
  │ │        Help      Documentation, support, sources                  │ │
  │ └───────────────────────────────────────────────────────────────────┘ │
  ├───────────────────────────────────────────────────────────────────────┤
  │                     <  OK  >           < Exit >                       │
  └───────────────────────────────────────────────────────────────────────┘

 Configuration utility, Armbian 21.02.1 stable, 195.198.8.121
 ──────────────────────────────────────────────────────────────────────────────

                      ┌─────────Please wait────────────┐
                      │                                │
                      │ Loading software submodule ... │
                      │                                │
                      └────────────────────────────────┘

 Configuration utility, Armbian 21.02.1 stable, 195.198.8.121
 ──────────────────────────────────────────────────────────────────────────────

    ┌──────────────────System and 3rd party software─────────────────────┐
    │ ┌────────────────────────────────────────────────────────────────┐ │
    │ │       Softy            3rd party applications installer        │ │
    │ │       Monitor          Simple CLI board monitoring             │ │
    │ │       Benchmarking     sbc-bench board benchmarking            │ │
    │ │       Diagnostics      Send diagnostics                        │ │
    │ │       Headers_install  kernel headers                          │ │
    │ │       Source_install   kernel source                           │ │
    │ │       Full             Install full firmware package           │ │
    │ └────────────────────────────────────────────────────────────────┘ │
    ├────────────────────────────────────────────────────────────────────┤
    │                   <  OK  >          < Back >                       │
    └────────────────────────────────────────────────────────────────────┘

 Configuration utility, Armbian 21.02.1 stable, 195.198.8.121
 ──────────────────────────────────────────────────────────────────────────────

                       ┌─────── Please wait ─────────┐
                       │                             │
                       │ Loading softy submodule ... │
                       │                             │
                       └─────────────────────────────┘

 Softy - Armbian post deployment scripts, https://www.armbian.com
 ──────────────────────────────────────────────────────────────────────────────

                         ┌──────Please wait─────────┐
                         │                          │
                         │ Loading install info ... │
                         │                          │
                         └──────────────────────────┘

 So┌────────────────────Installing to Debian buster──────────────────────┐
 ──│                                                                     │─────
   │ Choose what you want to install:                                    │
   │                                                                     │
   │ ┌─────────────────────────────────────────────────────────────────┐ │
   │ │ [ ] Samba         Windows compatible file sharing               │ │
   │ │ [ ] CUPS          Common UNIX Printing System (CUPS)            │ │
   │ │ [ ] TV headend    TV streaming server                           │ │
   │ │ [ ] Syncthing     Personal cloud @syncthing.net                 │ │
   │ │ [ ] Hassio        Home assistant smarthome suite                │ │
   │ │ [ ] OpenHAB2      Openhab smarthome suite                       │ │
   │ │ [ ] OpenHAB3      Openhab smarthome suite                       │ │
   │ │ [ ] NCP           Nextcloud personal cloud                      │ │
   │ │ [*] OMV           OpenMediaVault NAS solution                   │ │
   │ │ [ ] Plex          Plex media server                             │ │
   │ │ [ ] Emby          Emby server                                   │ │
   │ │ [ ] Radarr        Movies downloading server                     │ │
   │ │ [ ] Sonarr        TV shows downloading server                   │ │
   │ │ [ ] Minidlna      Lightweight DLNA/UPnP-AV server               │ │
   │ └─────↓(+)────────────────────────────────────────────────70%─────┘ │
   ├─────────────────────────────────────────────────────────────────────┤
   │                   <Install>          <Cancel >                      │
   └─────────────────────────────────────────────────────────────────────┘

 Softy - Armbian post deployment scripts, https://www.armbian.com
 ──────────────────────────────────────────────────────────────────────────────

    ┌────────────────────────── Downloading ─────────────────────────────┐
    │ Please wait                                                        │
    │                                                                    │
    │  ┌──────────────────────────────────────────────────────────────┐  │
    │  │                             100%                             │  │
    │  └──────────────────────────────────────────────────────────────┘  │
    └────────────────────────────────────────────────────────────────────┘

Now installing OpenMediaVault. Be patient, it will take several minutes...
[  362.447781] lvm2-activation-generator: lvmconfig failed
[  362.449641] lvm2-activation-generator: Activation generator failed.
[  362.792087] lvm2-activation-generator: lvmconfig failed
[  362.794060] lvm2-activation-generator: Activation generator failed.
[  363.284285] lvm2-activation-generator: lvmconfig failed
[  363.286079] lvm2-activation-generator: Activation generator failed.
[  363.686299] lvm2-activation-generator: lvmconfig failed
[  363.690151] lvm2-activation-generator: Activation generator failed.
[  365.615139] lvm2-activation-generator: lvmconfig failed
[  365.617036] lvm2-activation-generator: Activation generator failed.
[  365.995708] lvm2-activation-generator: lvmconfig failed
[  365.997520] lvm2-activation-generator: Activation generator failed.
[  368.578690] lvm2-activation-generator: lvmconfig failed
[  368.582483] lvm2-activation-generator: Activation generator failed.
[  368.935064] lvm2-activation-generator: lvmconfig failed
[  368.938756] lvm2-activation-generator: Activation generator failed.
[  369.377568] lvm2-activation-generator: lvmconfig failed
[  369.379178] lvm2-activation-generator: Activation generator failed.
[  370.741216] lvm2-activation-generator: lvmconfig failed
[  370.745129] lvm2-activation-generator: Activation generator failed.
[  371.476029] lvm2-activation-generator: lvmconfig failed
[  371.477678] lvm2-activation-generator: Activation generator failed.
[  372.179404] lvm2-activation-generator: lvmconfig failed
[  372.183052] lvm2-activation-generator: Activation generator failed.
[  372.614750] lvm2-activation-generator: lvmconfig failed
[  372.618267] lvm2-activation-generator: Activation generator failed.
[  375.570873] lvm2-activation-generator: lvmconfig failed
[  375.572645] lvm2-activation-generator: Activation generator failed.
[  375.956921] lvm2-activation-generator: lvmconfig failed
[  375.958568] lvm2-activation-generator: Activation generator failed.
[  400.854284] lvm2-activation-generator: lvmconfig failed
[  400.857904] lvm2-activation-generator: Activation generator failed.
[  401.255218] lvm2-activation-generator: lvmconfig failed
[  401.258716] lvm2-activation-generator: Activation generator failed.
[  401.915002] lvm2-activation-generator: lvmconfig failed
[  401.916811] lvm2-activation-generator: Activation generator failed.
[  402.917996] lvm2-activation-generator: lvmconfig failed
[  402.919701] lvm2-activation-generator: Activation generator failed.
[  416.205233] lvm2-activation-generator: lvmconfig failed
[  416.208571] lvm2-activation-generator: Activation generator failed.
[  416.896487] lvm2-activation-generator: lvmconfig failed
[  416.897955] lvm2-activation-generator: Activation generator failed.
[  417.239755] lvm2-activation-generator: lvmconfig failed
[  417.241392] lvm2-activation-generator: Activation generator failed.
[  418.002236] lvm2-activation-generator: lvmconfig failed
[  418.003973] lvm2-activation-generator: Activation generator failed.
[  418.735913] lvm2-activation-generator: lvmconfig failed
[  418.739035] lvm2-activation-generator: Activation generator failed.
[  421.246893] lvm2-activation-generator: lvmconfig failed
[  421.249874] lvm2-activation-generator: Activation generator failed.
[  421.717364] lvm2-activation-generator: lvmconfig failed
[  421.720287] lvm2-activation-generator: Activation generator failed.
[  422.129259] lvm2-activation-generator: lvmconfig failed
[  422.130832] lvm2-activation-generator: Activation generator failed.
[  422.617320] lvm2-activation-generator: lvmconfig failed
[  422.620309] lvm2-activation-generator: Activation generator failed.
[  425.499225] lvm2-activation-generator: lvmconfig failed
[  425.500761] lvm2-activation-generator: Activation generator failed.
[  426.081921] lvm2-activation-generator: lvmconfig failed
[  426.083552] lvm2-activation-generator: Activation generator failed.
[  439.890626] lvm2-activation-generator: lvmconfig failed
[  439.892191] lvm2-activation-generator: Activation generator failed.
[  440.280891] lvm2-activation-generator: lvmconfig failed
[  440.283940] lvm2-activation-generator: Activation generator failed.
[  440.667616] RPC: Registered named UNIX socket transport module.
[  440.670694] RPC: Registered udp transport module.
[  440.673508] RPC: Registered tcp transport module.
[  440.676231] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  440.731707] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  442.558776] lvm2-activation-generator: lvmconfig failed
[  442.561750] lvm2-activation-generator: Activation generator failed.
[  442.914890] lvm2-activation-generator: lvmconfig failed
[  442.918161] lvm2-activation-generator: Activation generator failed.
[  443.322123] NFSD: starting 90-second grace period (net ffffff80093ea4c0)
[  448.501941] lvm2-activation-generator: lvmconfig failed
[  448.503715] lvm2-activation-generator: Activation generator failed.
[  449.001585] lvm2-activation-generator: lvmconfig failed
[  449.004903] lvm2-activation-generator: Activation generator failed.
[  449.368884] lvm2-activation-generator: lvmconfig failed
[  449.370570] lvm2-activation-generator: Activation generator failed.
[  462.619962] lvm2-activation-generator: lvmconfig failed
[  462.623249] lvm2-activation-generator: Activation generator failed.
[  463.372140] lvm2-activation-generator: lvmconfig failed
[  463.373696] lvm2-activation-generator: Activation generator failed.
[  464.083544] lvm2-activation-generator: lvmconfig failed
[  464.085138] lvm2-activation-generator: Activation generator failed.
[  464.552991] lvm2-activation-generator: lvmconfig failed
[  464.556273] lvm2-activation-generator: Activation generator failed.
[  465.035334] lvm2-activation-generator: lvmconfig failed
[  465.038485] lvm2-activation-generator: Activation generator failed.
[  466.335717] lvm2-activation-generator: lvmconfig failed
[  466.337187] lvm2-activation-generator: Activation generator failed.
[  466.940899] lvm2-activation-generator: lvmconfig failed
[  466.944154] lvm2-activation-generator: Activation generator failed.
[  467.447974] lvm2-activation-generator: lvmconfig failed
[  467.451133] lvm2-activation-generator: Activation generator failed.
[  468.114443] lvm2-activation-generator: lvmconfig failed
[  468.115880] lvm2-activation-generator: Activation generator failed.
[  469.061060] lvm2-activation-generator: lvmconfig failed
[  469.064286] lvm2-activation-generator: Activation generator failed.
[  469.446355] lvm2-activation-generator: lvmconfig failed
[  469.449611] lvm2-activation-generator: Activation generator failed.
[  469.852084] lvm2-activation-generator: lvmconfig failed
[  469.853656] lvm2-activation-generator: Activation generator failed.
[  474.483783] lvm2-activation-generator: lvmconfig failed
[  474.485506] lvm2-activation-generator: Activation generator failed.
[  474.902353] lvm2-activation-generator: lvmconfig failed
[  474.903899] lvm2-activation-generator: Activation generator failed.
[  475.297920] lvm2-activation-generator: lvmconfig failed
[  475.301176] lvm2-activation-generator: Activation generator failed.
[  476.184363] lvm2-activation-generator: lvmconfig failed
[  476.186053] lvm2-activation-generator: Activation generator failed.
[  476.657261] lvm2-activation-generator: lvmconfig failed
[  476.660657] lvm2-activation-generator: Activation generator failed.
[  477.229261] lvm2-activation-generator: lvmconfig failed
[  477.230801] lvm2-activation-generator: Activation generator failed.
[  477.623406] lvm2-activation-generator: lvmconfig failed
[  477.624904] lvm2-activation-generator: Activation generator failed.
[  478.430152] lvm2-activation-generator: lvmconfig failed
[  478.431667] lvm2-activation-generator: Activation generator failed.
[  479.501144] lvm2-activation-generator: lvmconfig failed
[  479.502722] lvm2-activation-generator: Activation generator failed.
[  480.285300] lvm2-activation-generator: lvmconfig failed
[  480.288433] lvm2-activation-generator: Activation generator failed.
[  480.714939] lvm2-activation-generator: lvmconfig failed
[  480.718095] lvm2-activation-generator: Activation generator failed.
[  481.603966] lvm2-activation-generator: lvmconfig failed
[  481.605600] lvm2-activation-generator: Activation generator failed.
[  482.040658] lvm2-activation-generator: lvmconfig failed
[  482.042240] lvm2-activation-generator: Activation generator failed.
[  491.006250] nfsd: last server has exited, flushing export cache

Now applying board tweak if required...
 Softy - Armbian post deployment scripts, https://www.armbian.com
 ──────────────────────────────────────────────────────────────────────────────

                         ┌──────Please wait─────────┐
                         │                          │
                         │ Loading install info ... │
                         │                          │
                         └──────────────────────────┘

[ 1077.320928] tty_port_close_start: tty->count = 1 port count = 3.
[ 1080.509584] dw_wdt: unexpected close, system will reboot soon
[ 1080.553832] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 1080.616689] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 1080.633619] systemd-journald[885]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 1080.644670] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 1080.658752] systemd-shutdown[1]: Hardware watchdog 'Synopsys DesignWare Watchdog', version 0
[ 1080.664845] systemd-shutdown[1]: Unmounting file systems.
[ 1080.671090] [10646]: Remounting '/' read-only in with options 'errors=remount-ro,commit=600'.
[ 1080.841962] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro,commit=600
[ 1080.867131] systemd-shutdown[1]: All filesystems unmounted.
[ 1080.870985] systemd-shutdown[1]: Deactivating swaps.
[ 1080.874869] systemd-shutdown[1]: All swaps deactivated.
[ 1080.878559] systemd-shutdown[1]: Detaching loop devices.
[ 1080.885076] systemd-shutdown[1]: All loop devices detached.
[ 1080.888853] systemd-shutdown[1]: Detaching DM devices.
[ 1080.892808] systemd-shutdown[1]: All DM devices detached.
[ 1080.896527] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[ 1081.142894] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 1081.148970] systemd-shutdown[1]: Rebooting.
[ 1081.152736] kvm: exiting hardware virtualization
[ 1081.156676] cpu cpu4: min=816000, max=816000
[ 1081.161184] cpu cpu0: min=816000, max=816000
[ 1081.169202] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[ 1081.177524] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[ 1081.185806] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1081.193922] sd 0:0:0:0: [sda] Synchronizing SCSI cache
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 323
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80589
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5af4
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Feb 03 2021 - 22:43:01 +0100)

SoC: Rockchip rk3399
Reset cause: WDOG
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
10390562 bytes read in 445 ms (22.3 MiB/s)
20770824 bytes read in 883 ms (22.4 MiB/s)
101557 bytes read in 13 ms (7.5 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    10390498 Bytes = 9.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f5506000, end f5eeebe2 ... OK
ERROR: reserving fdt memory region failed (addr=0 size=0)
   Loading Device Tree to 00000000f5484000, end 00000000f5505fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.213-rk3399 (root@beast) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #14 SMP Wed Feb 3 20:52:28 CET 2021
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] PERCPU: Embedded 20 pages/cpu @ffffffc0f7ed2000 s42216 r8192 d31512 u81920
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: root=UUID=c99fadcc-25b5-485d-85e6-d859de7ee644 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=50f571e6-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xeea00000-0xf2a00000] (64MB)
[    0.000000] Memory: 3889792K/4061184K available (11582K kernel code, 1404K rwdata, 6148K rodata, 1088K init, 1956K bss, 171392K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff80091e0000 - 0xffffff80092f0000   (  1088 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008bd0000   ( 11584 KB)
[    0.000000]     .rodata : 0xffffff8008bd0000 - 0xffffff80091e0000   (  6208 KB)
[    0.000000]       .data : 0xffffff80092f0000 - 0xffffff800944f008   (  1405 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @ee500000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000ee490000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000ee4a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001491] Console: colour dummy device 80x25
[    0.003372] console [tty1] enabled
[    0.003468] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003534] pid_max: default: 32768 minimum: 301
[    0.003680] Security Framework initialized
[    0.003716] Yama: becoming mindful.
[    0.003766] AppArmor: AppArmor disabled by boot time parameter
[    0.003847] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003888] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004687] Initializing cgroup subsys io
[    0.004732] Initializing cgroup subsys memory
[    0.004791] Initializing cgroup subsys devices
[    0.004831] Initializing cgroup subsys freezer
[    0.004869] Initializing cgroup subsys net_cls
[    0.004907] Initializing cgroup subsys perf_event
[    0.004946] Initializing cgroup subsys net_prio
[    0.004989] Initializing cgroup subsys hugetlb
[    0.005025] Initializing cgroup subsys pids
[    0.005092] ftrace: allocating 41873 entries in 164 pages
[    0.120353] sched-energy: Sched-energy-costs installed from DT
[    0.120404] CPU0: update cpu_capacity 401
[    0.120490] ASID allocator initialised with 32768 entries
[    0.123570] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.124197] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.125728] Detected VIPT I-cache on CPU1
[    0.125767] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.125804] CPU1: using LPI pending table @0x00000000ee730000
[    0.125865] CPU1: update cpu_capacity 401
[    0.125869] CPU1: Booted secondary processor [410fd034]
[    0.126668] Detected VIPT I-cache on CPU2
[    0.126702] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.126739] CPU2: using LPI pending table @0x00000000ee760000
[    0.126795] CPU2: update cpu_capacity 401
[    0.126800] CPU2: Booted secondary processor [410fd034]
[    0.127665] Detected VIPT I-cache on CPU3
[    0.127696] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.127732] CPU3: using LPI pending table @0x00000000ee7b0000
[    0.127787] CPU3: update cpu_capacity 401
[    0.127791] CPU3: Booted secondary processor [410fd034]
[    0.128630] Detected PIPT I-cache on CPU4
[    0.128656] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.128694] CPU4: using LPI pending table @0x00000000ee7f0000
[    0.128730] CPU4: update cpu_capacity 1024
[    0.128734] CPU4: Booted secondary processor [410fd082]
[    0.129429] Detected PIPT I-cache on CPU5
[    0.129455] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.129494] CPU5: using LPI pending table @0x00000000edc20000
[    0.129532] CPU5: update cpu_capacity 1024
[    0.129536] CPU5: Booted secondary processor [410fd082]
[    0.129640] Brought up 6 CPUs
[    0.130360] SMP: Total of 6 processors activated.
[    0.130393] CPU features: detected feature: GIC system register CPU interface
[    0.130431] CPU features: detected feature: 32-bit EL0 Support
[    0.130467] CPU: All CPU(s) started at EL2
[    0.130540] alternatives: patching kernel code
[    0.132024] devtmpfs: initialized
[    0.149634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.149694] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.150202] xor: measuring software checksum speed
[    0.187353]    8regs     :  2855.000 MB/sec
[    0.227416]    8regs_prefetch:  2558.000 MB/sec
[    0.267477]    32regs    :  3211.000 MB/sec
[    0.307540]    32regs_prefetch:  2840.000 MB/sec
[    0.307561] xor: using function: 32regs (3211.000 MB/sec)
[    0.307599] pinctrl
                      [    0.644088] raid6: int64x2  gen()   753 MB/s
[    0.712202] raid6: int64x2  xor()   608 MB/s
[    0.780309] raid6: int64x4  gen()   945 MB/s
[    0.848373] raid6: int64x4  xor()   672 MB/s
[    0.916485] raid6: int64x8  gen()   866 MB/s
[    0.984604] raid6: int64x8  xor()   608 MB/s
[    1.052729] raid6: neonx1   gen()   906 MB/s
[    1.120829] raid6: neonx1   xor()   679 MB/s
[    1.188925] raid6: neonx2   gen()  1521 MB/s
[    1.257028] raid6: neonx2   xor()   977 MB/s
[    1.325109] raid6: neonx4   gen()  1767 MB/s
[    1.393219] raid6: neonx4   xor()  1138 MB/s
[    1.461307] raid6: neonx8   gen()  1696 MB/s
[    1.529412] raid6: neonx8   xor()  1244 MB/s
[    1.529803] raid6: using algorithm neonx4 gen() 1767 MB/s
[    1.530297] raid6: .... xor() 1138 MB/s, rmw enabled
[    1.530755] raid6: using intx1 recovery algorithm
[    1.532967] vcc12v_dcin_bkup: supplied by vcc12v_dcin
[    1.533738] vcc12v_hdd: supplied by vcc12v_dcin_bkup
[    1.534617] vcc1v8_sys_s0: regulator get failed, ret=-517
[    1.535423] vcc0v9_s3: regulator get failed, ret=-517
[    1.536193] avdd_0v9_s0: regulator get failed, ret=-517
[    1.537083] avdd_1v8_s0: regulator get failed, ret=-517
[    1.552907] pcie_power: regulator get failed, ret=-517
[    1.553874] vcc3v3_sys_s3: regulator get failed, ret=-517
[    1.580993] vcc3v0_sd: regulator get failed, ret=-517
[    1.582284] vcc5v0_usb: regulator get failed, ret=-517
[    1.583349] vcc5v0_perdev: supplied by vcc12v_dcin_bkup
[    1.584288] pcie_power: supplied by vcc5v0_perdev
[    1.584951] vcc5v0_usb: supplied by vcc5v0_perdev
[    1.585545] vcc5v0_hdd: supplied by vcc12v_dcin_bkup
[    1.586678] vcc5v0_sys: supplied by vcc12v_dcin_bkup
[    1.587441] vcc3v3_sys_s3: supplied by vcc5v0_sys
[    1.587904] vcc0v9_s3: supplied by vcc3v3_sys_s3
[    1.588437] avdd_1v8_s0: supplied by vcc3v3_sys_s3
[    1.588955] vcc3v0_sd: supplied by vcc3v3_sys_s3
[    1.590437] usblan_power: supplied by vcc5v0_usb
[    1.591857] iommu: Adding device ff650000.vpu_service to group 0
[    1.592478] iommu: Adding device ff660000.rkvdec to group 1
[    1.593115] iommu: Adding device ff8f0000.vop to group 2
[    1.593685] iommu: Adding device ff900000.vop to group 3
[    1.594689] rk_iommu ff650800.iommu: can't get sclk
[    1.595419] rk_iommu ff660480.iommu: can't get sclk
[    1.596075] rk_iommu ff8f3f00.iommu: can't get sclk
[    1.596689] rk_iommu ff903f00.iommu: can't get sclk
[    1.597550] SCSI subsystem initialized
[    1.598328] usbcore: registered new interface driver usbfs
[    1.598878] usbcore: registered new interface driver hub
[    1.599458] usbcore: registered new device driver usb
[    1.600005] media: Linux media interface: v0.10
[    1.600447] Linux video capture interface: v2.00
[    1.600978] pps_core: LinuxPPS API ver. 1 registered
[    1.601439] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.602298] PTP clock support registered
[    1.603884] Advanced Linux Sound Architecture Driver Initialized.
[    1.605343] NetLabel: Initializing
[    1.605666] NetLabel:  domain hash size = 128
[    1.606068] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.606575] NetLabel:  unlabeled traffic allowed by default
[    1.607350] rockchip-cpuinfo cpuinfo: Serial         : 85afff6e2668ee33
[    1.608521] clocksource: Switched to clocksource arch_sys_counter
[    1.656212] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.657102] NET: Registered protocol family 2
[    1.657969] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.658894] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.660314] TCP: Hash tables configured (established 32768 bind 32768)
[    1.661060] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    1.661773] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    1.662800] NET: Registered protocol family 1
[    1.663984] Trying to unpack rootfs image as initramfs...
[    2.179789] Freeing initrd memory: 10144K
[    2.180728] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.181566] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    2.183910] kvm [1]: 8-bit VMID
[    2.184211] kvm [1]: Hyp mode initialized successfully
[    2.184844] kvm [1]: interrupt-controller@fff20000 IRQ10
[    2.185541] kvm [1]: timer IRQ12
[    2.189203] audit: initializing netlink subsys (disabled)
[    2.189752] audit: type=2000 audit(2.112:1): initialized
[    2.190633] Initialise system trusted keyring
[    2.191429] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.199310] VFS: Disk quotas dquot_6.6.0
[    2.199836] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.201903] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.203100] fuse init (API version 7.23)
[    2.204021] JFS: nTxBlock = 8192, nTxLock = 65536
[    2.209973] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.212370] Key type big_key registered
[    2.212777]
[    2.212777] TEE Core Framework initialization (ver 1:0.1)
[    2.213435] TEE armv7 Driver initialization
[    2.214313] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    2.214918] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    2.215660] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    2.221717] Key type asymmetric registered
[    2.222110] Asymmetric key parser 'x509' registered
[    2.222751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.223577] io scheduler noop registered
[    2.223951] io scheduler deadline registered (default)
[    2.224455] io scheduler cfq registered
[    2.226468] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[    2.234469] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    2.235271] rk-vcodec ff650000.vpu_service: probe device
[    2.235981] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    2.237167] rk-vcodec ff650000.vpu_service: could not find power_model node
[    2.237806] rk-vcodec ff650000.vpu_service: init success
[    2.238526] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    2.239446] rk-vcodec ff660000.rkvdec: probe device
[    2.240088] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    2.241082] rk-vcodec ff660000.rkvdec: could not find power_model node
[    2.241675] rk-vcodec ff660000.rkvdec: init success
[    2.243654] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.244353] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.246634] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.247332] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.249332] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.251489] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    2.253305] [drm] Initialized drm 1.1.0 20060810
[    2.257255] [drm] Rockchip DRM driver version: v1.0.1
[    2.260087] Unable to detect cache hierarchy for CPU 0
[    2.261405] brd: module loaded
[    2.267180] loop: module loaded
[    2.267867] lkdtm: No crash points registered, enable through debugfs
[    2.269647] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.270722] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    2.272351] rockchip-spi ff1e0000.spi: no high_speed pinctrl state
[    2.273564] rockchip-spi ff200000.spi: no high_speed pinctrl state
[    2.276161] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.276830] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.277352] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    2.277887] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.278617] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.279252] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.284813] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.285436] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.285896]  Ring mode enabled
[    2.286182]  DMA HW capability register supported
[    2.286585]  Normal descriptors
[    2.286917]  RX Checksum Offload Engine supported (type 2)
[    2.287421]  TX Checksum insertion supported
[    2.287810]  Wake-Up On Lan supported
[    2.288188]  Enable RX Mitigation via HW Watchdog Timer
[    2.377641] libphy: stmmac: probed
[    2.378000] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.378599] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    2.381542] usbcore: registered new interface driver rndis_wlan
[    2.382347] Rockchip WiFi SYS interface (V1.00) ...
[    2.382916] usbcore: registered new interface driver cdc_ether
[    2.383504] usbcore: registered new interface driver rndis_host
[    2.386133] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    2.391577] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.393900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.394514] ehci-pci: EHCI PCI platform driver
[    2.394990] ehci-platform: EHCI generic platform driver
[    2.396120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.396720] ohci-platform: OHCI generic platform driver
[    2.398048] usbcore: registered new interface driver cdc_acm
[    2.398568] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.399335] usbcore: registered new interface driver cdc_wdm
[    2.399926] usbcore: registered new interface driver usbserial
[    2.400480] usbcore: registered new interface driver usbserial_generic
[    2.401130] usbserial: USB Serial support registered for generic
[    2.402523] usbcore: registered new interface driver iforce
[    2.403078] usbcore: registered new interface driver xpad
[    2.403748] usbcore: registered new interface driver usbtouchscreen
[    2.404318] <<-GTP-INFO->> GTP driver installing
[    2.405218] sensor_register_slave:mma8452,id=17
[    2.405642] sensor_register_slave:lis3dh,id=7
[    2.406049] sensor_register_slave:mma7660,id=18
[    2.406467] sensor_register_slave:lsm303d,id=22
[    2.406885] sensor_register_slave:mpu6880_acc,id=24
[    2.407337] sensor_register_slave:mpu6500_acc,id=25
[    2.407788] sensor_register_slave:lsm330_acc,id=26
[    2.408229] sensor_register_slave:akm8975,id=30
[    2.408675] sensor_register_slave:akm8963,id=31
[    2.409094] sensor_register_slave:l3g4200d,id=45
[    2.409522] sensor_register_slave:l3g20d,id=46
[    2.409938] sensor_register_slave:ewtsa,id=47
[    2.410344] sensor_register_slave:lsm330_gyro,id=51
[    2.410795] sensor_register_slave:cm3217,id=53
[    2.411212] sensor_register_slave:cm3218,id=54
[    2.412112] i2c /dev entries driver
[    2.413724] rk808 0-001b: Pmic Chip id: 0x0
[    2.416901] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.417525] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    2.418212] DCDC_REG1: supplied by vcc5v0_sys
[    2.419495] DCDC_REG2: supplied by vcc5v0_sys
[    2.420603] DCDC_REG3: supplied by vcc5v0_sys
[    2.421401] DCDC_REG4: supplied by vcc5v0_sys
[    2.422221] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    2.422733] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    2.423307] LDO_REG1: supplied by vcc5v0_sys
[    2.424337] LDO_REG2: supplied by vcc5v0_sys
[    2.425260] LDO_REG3: supplied by vcc5v0_sys
[    2.426680] LDO_REG4: supplied by vcc5v0_sys
[    2.428098] LDO_REG5: supplied by vcc5v0_sys
[    2.429031] LDO_REG6: supplied by vcc5v0_sys
[    2.430447] LDO_REG7: supplied by vcc5v0_sys
[    2.431359] LDO_REG8: supplied by vcc5v0_sys
[    2.432791] SWITCH_REG1: supplied by vcc3v3_sys_s3
[    2.433574] SWITCH_REG2: supplied by vcc3v3_sys_s3
[    2.437453] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    2.439141] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.439829] fan53555-reg: supplied by vcc5v0_sys
[    2.442448] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    2.443130] fan53555-reg: supplied by vcc5v0_sys
[    2.445270] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80097ce000
[    2.447790] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80097d0000
[    2.449006] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097d2000
[    2.454070] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_UFP
[    2.455029] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input0
[    2.456022] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097d4000
[    2.457220] rk3x-i2c ff3e0000.i2c: Initialized RK3xxx I2C bus at ffffff80097d6000
[    2.459772] usbcore: registered new interface driver uvcvideo
[    2.460303] USB Video Class driver (1.1.1)
[    2.463169] B
                [    2.545492] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    2.547661] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.550429] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    2.550980] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    2.584768] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    2.590261] ledtrig-cpu: registered to indicate activity on CPUs
[    2.590949] hidraw: raw HID events driver (C) Jiri Kosina
[    2.591984] usbcore: registered new interface driver usbhid
[    2.592496] usbhid: USB HID core driver
[    2.593210] ashmem: initialized
[    2.603494] Initializing XFRM netlink socket
[    2.604550] NET: Registered protocol family 10
[    2.606253] lib80211: common routines for IEEE802.11 drivers
[    2.606830] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.607606] [BT_RFKILL]: Enter rfkill_rk_init
[    2.608241] Key type dns_resolver registered
[    2.608259] fusb302 4-0022: CC connected in CC2 as UFP
[    2.609460] sensor_register_slave:mpu6880_gyro,id=50
[    2.610097] Error: Driver 'ov7750' is already registered, aborting...
[    2.610725] Error: Driver 'ov8858' is already registered, aborting...
[    2.611491] Error: Driver 'sc031gs' is already registered, aborting...
[    2.613856] Registered cp15_barrier emulation handler
[    2.613936] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    2.614722] mmc0: new high speed SDHC card at address aaaa
[    2.615860] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[    2.615929] Registered setend emulation handler
[    2.617690] registered taskstats version 1
[    2.618083] Loading compiled-in X.509 certificates
[    2.618548]  mmcblk0: p1
[    2.621296] Btrfs loaded, integrity-checker=on
[    2.621778] BTRFS: selftest: Running btrfs free space cache tests
[    2.622351] BTRFS: selftest: Running extent only tests
[    2.622835] BTRFS: selftest: Running bitmap only tests
[    2.623319] BTRFS: selftest: Running bitmap and extent tests
[    2.623857] BTRFS: selftest: Running space stealing from bitmap to extent
[    2.625220] BTRFS: selftest: Free space cache tests finished
[    2.625739] BTRFS: selftest: Running extent buffer operation tests
[    2.626270] BTRFS: selftest: Running btrfs_split_item tests
[    2.626842] BTRFS: selftest: Running find delalloc tests
[    2.670351] mmc1: new HS200 MMC card at address 0001
[    2.671521] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[    2.672416] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[    2.673694] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[    2.674968] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[    2.773069] BTRFS: selftest: Running btrfs_get_extent tests
[    2.773710] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.774297] BTRFS: selftest: Running outstanding_extents tests
[    2.774856] BTRFS: selftest: Running qgroup tests
[    2.775277] BTRFS: selftest: Qgroup basic add
[    2.775706] BTRFS: selftest: Qgroup multiple refs test
[    2.821260] Key type encrypted registered
[    2.822557] rga2: Driver loaded successfully ver:3.02
[    2.823199] rga2: Module initialized.
[    2.824431] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator
[    2.830754] rockchip-pcie f8000000.pcie: bus-scan-delay-ms in device tree is 2000 ms
[    2.831534] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    2.832195] PCI host bridge /pcie@f8000000 ranges:
[    2.832811]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    2.833338]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.833957] rockchip-pcie f8000000.pcie: invalid power supply
[    2.931204] random: nonblocking pool is initialized
[    2.937672] rockchip-pcie f8000000.pcie: wait 2000 ms (from device tree) before bus scan
[    3.117998] vendor storage:20190527 ret = 0
[    4.940963] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    4.941632] pci_bus 0000:00: root bus resource [bus 00-1f]
[    4.942180] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    4.942857] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    4.944657] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    4.945939] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    4.946677] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    4.947413] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    4.948148] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    4.948910] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    4.956713] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
[    4.957381] pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    4.957983] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    4.958719] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    4.959383] pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x107f]
[    4.959999] pci 0000:01:00.0: BAR 1: assigned [io  0x1080-0x10ff]
[    4.960647] pci 0000:01:00.0: BAR 2: assigned [io  0x1100-0x117f]
[    4.961272] pci 0000:01:00.0: BAR 3: assigned [io  0x1180-0x11ff]
[    4.961877] pci 0000:01:00.0: BAR 4: assigned [io  0x1200-0x127f]
[    4.962492] pci 0000:00:00.0: PCI bridge to [bus 01]
[    4.963012] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    4.963608] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    4.964467] pcieport 0000:00:00.0: enabling device (0000 -> 0003)
[    4.965588] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    4.966275] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.967416] ahci 0000:01:00.0: enabling device (0000 -> 0003)
[    4.968576] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    4.969342] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    4.970154] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    4.976849] scsi host0: ahci
[    4.978202] scsi host1: ahci
[    4.979664] scsi host2: ahci
[    4.981032] scsi host3: ahci
[    4.982327] scsi host4: ahci
[    4.982835] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 255
[    4.983541] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 256
[    4.984238] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 257
[    4.984962] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 258
[    4.985659] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 259
[    4.991469] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.992363] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
[    4.993258] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    4.994102] xhci-hcd xhci-hcd.2.auto: irq 223, io mem 0xfe800000
[    4.994881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.995504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.996171] usb usb1: Product: xHCI Host Controller
[    4.996635] usb usb1: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    4.997198] usb usb1: SerialNumber: xhci-hcd.2.auto
[    4.998466] hub 1-0:1.0: USB hub found
[    4.998874] hub 1-0:1.0: 1 port detected
[    4.999632] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    5.000335] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[    5.001170] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.002048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.002677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.003352] usb usb2: Product: xHCI Host Controller
[    5.003812] usb usb2: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    5.004376] usb usb2: SerialNumber: xhci-hcd.2.auto
[    5.005425] hub 2-0:1.0: USB hub found
[    5.005818] hub 2-0:1.0: 1 port detected
[    5.008282] xhci-hcd xhci-hcd.2.auto: remove, state 1
[    5.008812] usb usb2: USB disconnect, device number 1
[    5.013874] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.014579] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[    5.015456] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    5.016311] xhci-hcd xhci-hcd.3.auto: irq 224, io mem 0xfe900000
[    5.017154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.017784] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.018459] usb usb3: Product: xHCI Host Controller
[    5.018919] usb usb3: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    5.019483] usb usb3: SerialNumber: xhci-hcd.3.auto
[    5.020507] hub 3-0:1.0: USB hub found
[    5.020927] hub 3-0:1.0: 1 port detected
[    5.021656] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.022333] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    5.023122] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.023996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    5.024645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.025320] usb usb4: Product: xHCI Host Controller
[    5.025779] usb usb4: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    5.026015] xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds.
[    5.026022] xhci-hcd xhci-hcd.2.auto: Host controller not halted, aborting reset.
[    5.026067] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered
[    5.028235] usb usb4: SerialNumber: xhci-hcd.3.auto
[    5.029274] hub 4-0:1.0: USB hub found
[    5.029660] hub 4-0:1.0: 1 port detected
[    5.031045] xhci-hcd xhci-hcd.2.auto: remove, state 1
[    5.031537] usb usb1: USB disconnect, device number 1
[    5.033140] xhci-hcd xhci-hcd.2.auto: USB bus 1 deregistered
[    5.034853] ehci-platform fe380000.usb: EHCI Host Controller
[    5.035578] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    5.036621] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[    5.048614] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    5.049574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.050222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.050934] usb usb1: Product: EHCI Host Controller
[    5.051409] usb usb1: Manufacturer: Linux 4.4.213-rk3399 ehci_hcd
[    5.051990] usb usb1: SerialNumber: fe380000.usb
[    5.053603] hub 1-0:1.0: USB hub found
[    5.054058] hub 1-0:1.0: 1 port detected
[    5.056276] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    5.057403] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
[    5.058398] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[    5.116753] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.117394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.118082] usb usb2: Product: Generic Platform OHCI controller
[    5.118636] usb usb2: Manufacturer: Linux 4.4.213-rk3399 ohci_hcd
[    5.119201] usb usb2: SerialNumber: fe3a0000.usb
[    5.120654] hub 2-0:1.0: USB hub found
[    5.121086] hub 2-0:1.0: 1 port detected
[    5.122499] input: adc-keys as /devices/platform/adc-keys/input/input1
[    5.126321
             [    5.332597] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    5.436698] wifi_platform_bus_enumerate device present 1
[    5.437234] ======== Card detection to detect SDIO card! ========
[    5.437822] sdio: host isn't  initialization successfully.
[    5.462758] usb 3-1: New USB device found, idVendor=2109, idProduct=2815
[    5.463426] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.464113] usb 3-1: Product: USB2.0 Hub
[    5.464648] usb 3-1: Manufacturer: VIA Labs, Inc.
[    5.471585] hub 3-1:1.0: USB hub found
[    5.472192] hub 3-1:1.0: 4 ports detected
[    5.496190] fusb302 4-0022: PD disabled
[    5.595065] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.653047] usb 4-1: New USB device found, idVendor=2109, idProduct=0815
[    5.653715] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.654401] usb 4-1: Product: USB3.0 Hub
[    5.654909] usb 4-1: Manufacturer: VIA Labs, Inc.
[    5.663635] hub 4-1:1.0: USB hub found
[    5.664277] hub 4-1:1.0: 4 ports detected
[    5.673292] phy phy-ff770000.syscon:usb2-phy@e450.7: charger = USB_FLOATING_CHARGER
[    5.678360] rockchip-dwc3 usb0: USB peripheral connected
[    6.289395] usb 4-1.4: new SuperSpeed USB device number 3 using xhci-hcd
[    6.308585] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156
[    6.309258] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    6.309968] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[    6.310462] usb 4-1.4: Manufacturer: Realtek
[    6.310880] usb 4-1.4: SerialNumber: 000000001
[    7.436571] failed to power up DHD generic adapter, 1 retry left
[    7.453270] wifi_platform_set_power = 0
[    7.453671] ======== PULL WL_REG_ON(-1) LOW! ========
[    7.454165] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    7.454643] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    7.455502] wifi_platform_bus_enumerate device present 0
[    7.456025] ======== Card detection to remove SDIO card! ========
[    7.456637] sdio: host isn't  initialization successfully.
[    7.457244] wifi_platform_set_power = 1
[    7.457642] ======== PULL WL_REG_ON(-1) HIGH! ========
[    7.458146] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    7.458623] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    7.760560] wifi_platform_bus_enumerate device present 1
[    7.761097] ======== Card detection to detect SDIO card! ========
[    7.761694] sdio: host isn't  initialization successfully.
[    9.760578] failed to power up DHD generic adapter, 0 retry left
[    9.777275] wifi_platform_set_power = 0
[    9.777675] ======== PULL WL_REG_ON(-1) LOW! ========
[    9.778168] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    9.778646] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    9.779503] wifi_platform_bus_enumerate device present 0
[    9.780026] ======== Card detection to remove SDIO card! ========
[    9.780635] sdio: host isn't  initialization successfully.
[    9.781186] failed to power up DHD generic adapter, max retry reached**
[    9.781819] unregister wifi platform drivers
[    9.782250] wifi_platform_bus_enumerate device present 0
[    9.782763] ======== Card detection to remove SDIO card! ========
[    9.783357] sdio: host isn't  initialization successfully.
[    9.783894] ======== dhd_wlan_deinit_plat_data ========
[    9.784421] dhd_module_init: Failed to load the driver, try cnt 0
[    9.785182] dhd_module_init: Failed to load driver max retry reached**
[    9.785817] dhd_module_init: Exit err=-19
[   12.924601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.949714] ata1.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   12.950361] ata1.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   12.960170] ata1.00: configured for UDMA/133
[   12.961737] scsi 0:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   12.964163] sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   12.965022] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   12.965943] sd 0:0:0:0: [sda] Write Protect is off
[   12.966593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.015628]  sda: sda1 sda9
[   13.018289] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.624802] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.697924] ata2.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.698585] ata2.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   13.708344] ata2.00: configured for UDMA/133
[   13.709819] scsi 1:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.711862] sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.712660] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   13.713512] sd 1:0:0:0: [sdb] Write Protect is off
[   13.714144] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.762037]  sdb: sdb1 sdb9
[   13.764612] sd 1:0:0:0: [sdb] Attached SCSI disk
[   14.316597] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.331588] ata3.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   14.332235] ata3.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   14.342010] ata3.00: configured for UDMA/133
[   14.344108] scsi 2:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   14.346359] sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   14.347138] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   14.347985] sd 2:0:0:0: [sdc] Write Protect is off
[   14.348651] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.400145]  sdc: sdc1 sdc9
[   14.402989] sd 2:0:0:0: [sdc] Attached SCSI disk
[   14.952594] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.968569] ata4.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   14.969217] ata4.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   14.977608] ata4.00: configured for UDMA/133
[   14.979601] scsi 3:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   14.981690] sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   14.982469] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   14.983312] sd 3:0:0:0: [sdd] Write Protect is off
[   14.983943] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.027700]  sdd: sdd1 sdd9
[   15.030613] sd 3:0:0:0: [sdd] Attached SCSI disk
[   15.304824] ata5: SATA link down (SStatus 0 SControl 300)
[   15.306393] Freeing unused kernel memory: 1088K
[   15.908250] md: linear personality registered for level -1
[   15.916899] md: multipath personality registered for level -4
[   15.924625] md: raid0 personality registered for level 0
[   15.932454] md: raid1 personality registered for level 1
[   15.939917] async_tx: api initialized (async)
[   15.945344] md: raid6 personality registered for level 6
[   15.945841] md: raid5 personality registered for level 5
[   15.946326] md: raid4 personality registered for level 4
[   15.961288] Unable to handle kernel paging request at virtual address fffffc0f7f3f2098
[   15.962023] pgd = ffffffc0e25be000
[   15.962339] [fffffc0f7f3f2098] *pgd=0000000000000000, *pud=0000000000000000
[   15.962992] Internal error: Oops: 96000004 [#1] SMP
[   15.963436] Modules linked in: raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod
[   15.964613] CPU: 5 PID: 297 Comm: modprobe Not tainted 4.4.213-rk3399 #14
[   15.965219] Hardware name: Helios64 (DT)
[   15.965582] task: ffffffc0eb2db800 task.stack: ffffffc0e2260000
[   15.966130] PC is at pick_next_task_fair+0x38/0x5b8
[   15.966578] LR is at __schedule+0x180/0x654
[   15.966964] pc : [<ffffff80080f7b50>] lr : [<ffffff8008bb9724>] pstate: 600001c5
[   15.967633] sp : ffffffc0e2263dd0
[   15.967938] x29: ffffffc0e2263dd0 x28: ffffffc0eb2dbe90
[   15.968445] x27: ffffff80092f88a0 x26: ffffff8008bde6a8
[   15.968951] x25: ffffffc0f7f3f200 x24: ffffff80092cd200
[   15.969457] x23: ffffff8008bb9c60 x22: fffffc0f7f3f2088
[   15.969963] x21: ffffffc0eb2db800 x20: ffffffc0eb2db800
[   15.970469] x19: fffffc0f7f3f2000 x18: 0000000000000100
[   15.970975] x17: 0000007f91aa7cf8 x16: 0000007f91ac3008
[   15.971481] x15: 0000000000000a44 x14: 0000007f917c0690
[   15.971987] x13: 0000000000048c30 x12: 0000000000000040
[   15.972493] x11: 0000000000000030 x10: 0000007f91a52d00
[   15.972999] x9 : 0000000000000000 x8 : 7f7f7f7f7f7f7f7f
[   15.973505] x7 : 0000000000000000 x6 : 00000003b75da4be
[   15.974012] x5 : 0000000000178ee4 x4 : 0000000000000000
[   15.974517] x3 : 00000040eec72000 x2 : ffffff80080f7b18
[   15.975023] x1 : ffffffc0eb2db800 x0 : ffffff8008bb9724
[   15.975529]
[   15.975529] PC: 0xffffff80080f7ad0:
[   15.975992] 7ad0  aa1403e0 97ffa7be aa1403e0 97ffca27 aa1403e0 942b14bb 52800001 aa1403e0
[   15.976792] 7af0  97ffff10 f9449680 eb150001 1a99535a f100003f 9a80a2b5 17ffffc5 f94033e0
[   15.977590] 7b10  f9000815 17ffffd6 a9b87bfd 910003fd a90153f3 a9025bf5 a90363f7 a9046bf9
[   15.978389] 7b30  a90573fb aa0003f3 f000573a 91022276 911aa35a aa0103f5 aa1e03e0 d503201f
[   15.979189] 7b50  b94012c0 34001ae0 f9403ea0 eb1a001f 54001041 aa1603f4 f9401e97 b4000137
[   15.979987] 7b70  b9403ae0 34000c60 aa1403e0 97ffde9e aa1403e0 97ffe8bf 72001c1f 54000ea1
[   15.980786] 7b90  aa1403e0 aa1703e1 97ffdb9e f940fc14 b5fffe54 d1020014 eb1402bf 540001c0
[   15.981584] 7bb0  910202b5 aa0003f6 f940faa0 f940fad7 eb0002ff 54000a21 b4000a17 aa1503e1
[   15.982383]
[   15.982383] LR: 0xffffff8008bb96a4:
[   15.982845] 96a4  f9400e80 b40001a0 f9400e80 d2801021 ea01001f 540015a0 f9400281 36001561
[   15.983642] 96c4  37000080 f943d280 7218001f 540014e0 f9000e9f 911a229c b9406680 7100041f
[   15.984440] 96e4  54000061 aa1303e0 97d4a0b8 f9403e81 b0000120 911aa000 eb00003f 54001f01
[   15.985238] 9704  b9401a62 b9409e60 6b00005f 54001e81 f9401822 aa1303e0 aa1403e1 d63f0040
[   15.986036] 9724  aa0003f5 b100041f 54001da0 b50000e0 b0000120 aa1403e1 f9430802 aa1303e0
[   15.986834] 9744  d63f0040 aa0003f5 aa1403e1 52800020 97e4a14b b9093a7f eb15029f 54002300
[   15.987632] 9764  f9404260 f9048a75 91000400 f9004260 f9400380 91000400 f9000380 b0004300
[   15.988430] 9784  911d4000 91014000 b9400801 7100003f 540001cd aa1603e1 90000123 d538d082
[   15.989229]
[   15.989229] SP: 0xffffffc0e2263d50:
[   15.989691] 3d50  7f3f2088 fffffc0f 08bb9c60 ffffff80 092cd200 ffffff80 f7f3f200 ffffffc0
[   15.990489] 3d70  08bde6a8 ffffff80 092f88a0 ffffff80 eb2dbe90 ffffffc0 e2263dd0 ffffffc0
[   15.991287] 3d90  08bb9724 ffffff80 e2263dd0 ffffffc0 080f7b50 ffffff80 600001c5 00000000
[   15.992085] 3db0  092f88a0 ffffff80 00000000 ffffffc0 00000000 00000080 f7f3f288 ffffffc0
[   15.992884] 3dd0  e2263e50 ffffffc0 08bb9724 ffffff80 f7f3f200 ffffffc0 eb2db800 ffffffc0
[   15.993682] 3df0  00000005 00000000 092c4000 ffffff80 08bb9c60 ffffff80 092cd200 ffffff80
[   15.994480] 3e10  f7f3f200 ffffffc0 00000000 00000000 092f88a0 ffffff80 eb2db800 ffffffc0
[   15.995277] 3e30  e2263e50 ffffffc0 08bb96f0 ffffff80 f7f3f200 ffffffc0 092cd200 ffffff80
[   15.996076]
[   15.996076] X0: 0xffffff8008bb96a4:
[   15.996538] 96a4  f9400e80 b40001a0 f9400e80 d2801021 ea01001f 540015a0 f9400281 36001561
[   15.997336] 96c4  37000080 f943d280 7218001f 540014e0 f9000e9f 911a229c b9406680 7100041f
[   15.998134] 96e4  54000061 aa1303e0 97d4a0b8 f9403e81 b0000120 911aa000 eb00003f 54001f01
[   15.998932] 9704  b9401a62 b9409e60 6b00005f 54001e81 f9401822 aa1303e0 aa1403e1 d63f0040
[   15.999730] 9724  aa0003f5 b100041f 54001da0 b50000e0 b0000120 aa1403e1 f9430802 aa1303e0
[   16.000529] 9744  d63f0040 aa0003f5 aa1403e1 52800020 97e4a14b b9093a7f eb15029f 54002300
[   16.001327] 9764  f9404260 f9048a75 91000400 f9004260 f9400380 91000400 f9000380 b0004300
[   16.002124] 9784  911d4000 91014000 b9400801 7100003f 540001cd aa1603e1 90000123 d538d082
[   16.002924]
[   16.002924] X1: 0xffffffc0eb2db780:
[   16.003386] b780  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.004183] b7a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.004980] b7c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.005778] b7e0  00000000 00000000 00000000 00000000 ffffffff ffffffff ffffffff ffffffff
[   16.006576] b800  00000012 00000000 ffffffff ffffffff 00000000 00000000 00000000 00000000
[   16.007373] b820  e2260000 ffffffc0 00000002 00404000 00000000 00000000 00000000 00000000
[   16.008170] b840  00000001 00000005 0000005c 00000000 fffee9e9 00000000 edc3c600 ffffffc0
[   16.008969] b860  00000005 00000001 00000078 00000078 00000078 00000000 08bde6a8 ffffff80
[   16.009768]
[   16.009768] X2: 0xffffff80080f7a98:
[   16.010229] 7a98  a9446bf9 a94573fb a8c87bfd d65f03c0 f874daf4 aa1303e0 8b140014 f9403fe0
[   16.011028] 7ab8  f940e001 f9449680 eb00003f 54000184 aa1403e0 942b1475 aa1403e0 97ffa7be
[   16.011826] 7ad8  aa1403e0 97ffca27 aa1403e0 942b14bb 52800001 aa1403e0 97ffff10 f9449680
[   16.012625] 7af8  eb150001 1a99535a f100003f 9a80a2b5 17ffffc5 f94033e0 f9000815 17ffffd6
[   16.013424] 7b18  a9b87bfd 910003fd a90153f3 a9025bf5 a90363f7 a9046bf9 a90573fb aa0003f3
[   16.014222] 7b38  f000573a 91022276 911aa35a aa0103f5 aa1e03e0 d503201f b94012c0 34001ae0
[   16.015020] 7b58  f9403ea0 eb1a001f 54001041 aa1603f4 f9401e97 b4000137 b9403ae0 34000c60
[   16.015818] 7b78  aa1403e0 97ffde9e aa1403e0 97ffe8bf 72001c1f 54000ea1 aa1403e0 aa1703e1
[   16.016623]
[   16.016623] X20: 0xffffffc0eb2db780:
[   16.017085] b780  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.017882] b7a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.018679] b7c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.019476] b7e0  00000000 00000000 00000000 00000000 ffffffff ffffffff ffffffff ffffffff
[   16.020274] b800  00000012 00000000 ffffffff ffffffff 00000000 00000000 00000000 00000000
[   16.021071] b820  e2260000 ffffffc0 00000002 00404000 00000000 00000000 00000000 00000000
[   16.021869] b840  00000001 00000005 0000005c 00000000 fffee9e9 00000000 edc3c600 ffffffc0
[   16.022667] b860  00000005 00000001 00000078 00000078 00000078 00000000 08bde6a8 ffffff80
[   16.023465]
[   16.023465] X21: 0xffffffc0eb2db780:
[   16.023927] b780  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.024724] b7a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.025522] b7c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.026318] b7e0  00000000 00000000 00000000 00000000 ffffffff ffffffff ffffffff ffffffff
[   16.027116] b800  00000012 00000000 ffffffff ffffffff 00000000 00000000 00000000 00000000
[   16.027914] b820  e2260000 ffffffc0 00000002 004
                                                   [   23.027973] BUG: spinlock lockup suspected on CPU#0, swapper/0/0
[   23.028559]  lock: 0xffffffc0f7f3f200, .magic: dead4ead, .owner: modprobe/297, .owner_cpu: 5
[   23.029353] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D         4.4.213-rk3399 #14
[   23.030095] Hardware name: Helios64 (DT)
[   23.030470] Call trace:
[   23.030727] [<ffffff800808803c>] dump_backtrace+0x0/0x21c
[   23.031236] [<ffffff800808827c>] show_stack+0x24/0x30
[   23.031722] [<ffffff80084e3c68>] dump_stack+0xa4/0xcc
[   23.032209] [<ffffff80081939d8>] spin_dump+0x84/0xa4
[   23.032683] [<ffffff8008105b74>] do_raw_spin_lock+0xdc/0x164
[   23.033217] [<ffffff8008bbccf0>] _raw_spin_lock+0x20/0x2c
[   23.033726] [<ffffff80080e3a18>] try_to_wake_up+0x1a0/0x358
[   23.034246] [<ffffff80080e3c8c>] wake_up_process+0x2c/0x38
[   23.034766] [<ffffff80080d0274>] wake_up_worker+0x34/0x40
[   23.035273] [<ffffff80080d0310>] insert_work+0x90/0xa4
[   23.035757] [<ffffff80080d05fc>] __queue_work+0x2d8/0x2e8
[   23.036263] [<ffffff80080d0658>] queue_work_on+0x4c/0x6c
[   23.036773] [<ffffff80085ae4e0>] tty_schedule_flip+0x3c/0x48
[   23.037303] [<ffffff80085ae50c>] tty_flip_buffer_push+0x20/0x2c
[   23.037862] [<ffffff800899afe0>] fiq_debugger_handle_irq_context+0xac/0x438
[   23.038508] [<ffffff800899b4fc>] fiq_debugger_uart_irq+0x148/0xca8
[   23.039087] [<ffffff8008112ee0>] handle_irq_event_percpu+0xdc/0x1f8
[   23.039674] [<ffffff800811304c>] handle_irq_event+0x50/0x80
[   23.040195] [<ffffff80081166bc>] handle_fasteoi_irq+0xcc/0x134
[   23.040737] [<ffffff8008112610>] generic_handle_irq+0x2c/0x44
[   23.041278] [<ffffff800811298c>] __handle_domain_irq+0xb8/0xbc
[   23.041820] [<ffffff8008080e7c>] gic_handle_irq+0xc8/0x180
[   23.042337] Exception stack(0xffffff80092f3d70 to 0xffffff80092f3ea0)
[   23.042936] 3d60:                                   ffffffc0f7edb200 00000040eec0e000
[   23.043681] 3d80: ffffffc0f7edb200 ffffff80092f3e80 00ffffffffffffff 000000003100b56c
[   23.044425] 3da0: 0000000000001eda 0000000000000001 ffffff8009301a60 ffffff80092f3ec0
[   23.045169] 3dc0: 0000000000000a30 0000000000000191 0000000000000003 0000000000000003
[   23.045912] 3de0: 0000000000000001 000000000000000e 0000000000000028 00000000b151c1e7
[   23.046657] 3e00: 00000000a1c14965 00000003b6c79f92 ffffffc0ead04c00 0000000000000060
[   23.047401] 3e20: 0000000000000000 ffffff800941b3f8 0000000000000000 00000003b6c63668
[   23.048145] 3e40: ffffff80093d4490 0000000002bc323c 00000000031e001c ffffff80092f3ea0
[   23.048889] 3e60: ffffff8008953748 ffffff80092f3ea0 ffffff800895377c 0000000060000145
[   23.049633] 3e80: ffffff80092f3ea0 ffffff8008953748 ffffffffffffffff ffffffc0ead04c00
[   23.050377] [<ffffff80080827b4>] el1_irq+0xb4/0x140
[   23.050842] [<ffffff800895377c>] cpuidle_enter_state+0x1f8/0x25c
[   23.051407] [<ffffff8008953854>] cpuidle_enter+0x34/0x44
[   23.051906] [<ffffff80080ff2a4>] call_cpuidle+0x70/0x78
[   23.052403] [<ffffff80080ff554>] cpu_startup_entry+0x2a8/0x2b8
[   23.052946] [<ffffff8008bb8848>] rest_init+0x74/0x7c
[   23.053420] [<ffffff80091e0b84>] start_kernel+0x3c8/0x3ec
[   23.053927] [<ffffff80091e01c4>] __primary_switched+0x30/0x6c
[   23.076635] BUG: spinlock lockup suspected on CPU#4, swapper/4/0
[   23.077191]  lock: 0xffffffc0f7f3f200, .magic: dead4ead, .owner: modprobe/297, .owner_cpu: 5
[   23.077957] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G      D         4.4.213-rk3399 #14
[   23.078673] Hardware name: Helios64 (DT)
[   23.079034] Call trace:
[   23.079273] [<ffffff800808803c>] dump_backtrace+0x0/0x21c
[   23.079765] [<ffffff800808827c>] show_stack+0x24/0x30
[   23.080223] [<ffffff80084e3c68>] dump_stack+0xa4/0xcc
[   23.080682] [<ffffff80081939d8>] spin_dump+0x84/0xa4
[   23.081138] [<ffffff8008105b74>] do_raw_spin_lock+0xdc/0x164
[   23.081654] [<ffffff8008bbccf0>] _raw_spin_lock+0x20/0x2c
[   23.082146] [<ffffff80080fb160>] sched_rt_period_timer+0x11c/0x268
[   23.082707] [<ffffff8008126544>] __hrtimer_run_queues+0x1bc/0x284
[   23.083256] [<ffffff8008126b30>] hrtimer_interrupt+0xac/0x1bc
[   23.083783] [<ffffff80081327b0>] tick_receive_broadcast+0x30/0x4c
[   23.084332] [<ffffff800808c3f8>] handle_IPI+0x1f0/0x258
[   23.084810] [<ffffff8008080f30>] gic_handle_irq+0x17c/0x180
[   23.085312] Exception stack(0xffffffc0ee6f7da0 to 0xffffffc0ee6f7ed0)
[   23.085896] 7da0: 0000000000000000 0000000000000004 00000040eec5e000 0000000000000004
[   23.086602] 7dc0: 0000000000000010 0000000000000000 0000000000001eda 0000000000000004
[   23.087308] 7de0: 00000034b5593519 ffffff8008081800 0000000000001000 0000000000000000
[   23.088014] 7e00: 0000000034d5d91d 00000040eec5e000 ffffffc0ee6e3800 0000000000000000
[   23.088721] 7e20: 0000000000000000 0000000000000000 0000000030d00800 00000003b9ae4b6e
[   23.089426] 7e40: ffffffc0ead05400 0000000000000060 0000000000000002 ffffff800941b3f8
[   23.090132] 7e60: 0000000000000001 00000003b971a5e1 ffffff80093d4550 0000000002bc3244
[   23.090837] 7e80: 0000000000000000 ffffffc0ee6f7ed0 ffffff8008953778 ffffffc0ee6f7ed0
[   23.091543] 7ea0: ffffff800895377c 0000000060000145 ffffffc0ee6f7ed0 ffffff8008953778
[   23.092248] 7ec0: ffffffffffffffff ffffffc0ead05400
[   23.092692] [<ffffff80080827b4>] el1_irq+0xb4/0x140
[   23.093139] [<ffffff800895377c>] cpuidle_enter_state+0x1f8/0x25c
[   23.093688] [<ffffff8008953854>] cpuidle_enter+0x34/0x44
[   23.094169] [<ffffff80080ff2a4>] call_cpuidle+0x70/0x78
[   23.094649] [<ffffff80080ff554>] cpu_startup_entry+0x2a8/0x2b8
[   23.095175] [<ffffff800808be58>] secondary_start_kernel+0x124/0x140
[   23.095745] [<0000000002bc3188>] 0x2bc3188
[   23.105781] BUG: spinlock lockup suspected on CPU#5, modprobe/297
[   23.106331]  lock: 0xffffffc0f7f3f200, .magic: dead4ead, .owner: modprobe/297, .owner_cpu: 5
[   23.107096] CPU: 5 PID: 297 Comm: modprobe Tainted: G      D         4.4.213-rk3399 #14
[   23.107823] Hardware name: Helios64 (DT)
[   23.108183] Call trace:
[   23.108420] [<ffffff800808803c>] dump_backtrace+0x0/0x21c
[   23.108912] [<ffffff800808827c>] show_stack+0x24/0x30
[   23.109369] [<ffffff80084e3c68>] dump_stack+0xa4/0xcc
[   23.109826] [<ffffff80081939d8>] spin_dump+0x84/0xa4
[   23.110282] [<ffffff8008105b74>] do_raw_spin_lock+0xdc/0x164
[   23.110797] [<ffffff8008bbccc4>] _raw_spin_lock_irq+0x24/0x30
[   23.111322] [<ffffff8008bb9690>] __schedule+0xec/0x654
[   23.111790] [<ffffff8008bb9e30>] preempt_schedule_common+0x10/0x24
[   23.112350] [<ffffff8008bb9e78>] _cond_resched+0x34/0x44
[   23.112831] [<ffffff80080c8534>] exit_signals+0x20/0x17c
[   23.113313] [<ffffff80080bd2c0>] do_exit+0x104/0x8dc
[   23.113769] [<ffffff800808842c>] die+0x1a4/0x1b8
[   23.114191] [<ffffff80080936b4>] __do_kernel_fault.part.1+0x78/0x88
[   23.114761] [<ffffff8008093adc>] do_translation_fault+0xb8/0xc8
[   23.115297] [<ffffff8008080b08>] do_mem_abort+0x54/0xac
[   23.115775] Exception stack(0xffffffc0e2263c00 to 0xffffffc0e2263d30)
[   23.116358] 3c00: fffffc0f7f3f2000 0000008000000000 ffffffc0e2263dd0 ffffff80080f7b50
[   23.117064] 3c20: ffffffc0e2263c40 ffffff80081960d4 ffffffbdc3b30ec0 ffffffc0e1e830c0
[   23.117769] 3c40: ffffffc0e2263cb0 ffffff80081c3708 ffffffc0ed8619a0 000000000000002a
[   23.118475] 3c60: 0000007f917e1000 ffffffc0e18e3458 ffffffc0e2263c90 ffffff8008bbcd90
[   23.119180] 3c80: ffffffc0e149bbb8 ffffff80092f88e8 ffffffc0e2263cb0 ffffff80081c3800
[   23.119886] 3ca0: ffffff8008bb9724 ffffffc0eb2db800 ffffff80080f7b18 00000040eec72000
[   23.120592] 3cc0: 0000000000000000 0000000000178ee4 00000003b75da4be 0000000000000000
[   23.121298] 3ce0: 7f7f7f7f7f7f7f7f 0000000000000000 0000007f91a5
                                                                   [   25.856645] BUG: spinlock lockup suspected on CPU#1, swapper/1/0
[   25.857218]  lock: 0xffffffc0ee4b9400, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0
[   25.857999] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D         4.4.213-rk3399 #14
[   25.858740] Hardware name: Helios64 (DT)
[   25.859114] Call trace:
[   25.859366] [<ffffff800808803c>] dump_backtrace+0x0/0x21c
[   25.859875] [<ffffff800808827c>] show_stack+0x24/0x30
[   25.860358] [<ffffff80084e3c68>] dump_stack+0xa4/0xcc
[   25.860842] [<ffffff80081939d8>] spin_dump+0x84/0xa4
[   25.861314] [<ffffff8008105b74>] do_raw_spin_lock+0xdc/0x164
[   25.861846] [<ffffff8008bbccf0>] _raw_spin_lock+0x20/0x2c
[   25.862354] [<ffffff80080d0470>] __queue_work+0x14c/0x2e8
[   25.862863] [<ffffff80080d0b68>] delayed_work_timer_fn+0x28/0x34
[   25.863428] [<ffffff80081247f8>] call_timer_fn+0xa0/0x154
[   25.863935] [<ffffff8008124af0>] run_timer_softirq+0x218/0x244
[   25.864476] [<ffffff800808115c>] __do_softirq+0x224/0x2f8
[   25.864985] [<ffffff80080be9c0>] irq_exit+0x90/0xdc
[   25.865446] [<ffffff800808c390>] handle_IPI+0x188/0x258
[   25.865940] [<ffffff8008080f30>] gic_handle_irq+0x17c/0x180
[   25.866457] Exception stack(0xffffffc0ee6ebda0 to 0xffffffc0ee6ebed0)
[   25.867058] bda0: 0000000000000000 0000000000000001 00000040eec22000 0000000000000001
[   25.867801] bdc0: 0000000000000002 0000000000000000 0000000000001ee0 0000000000000001
[   25.868546] bde0: 00000032b5593519 ffffff8008081800 0000000000001000 0000000000000000
[   25.869289] be00: 0000000034d5d91d 00000040eec22000 ffffffc0ee6e0e00 0000000000000000
[   25.870033] be20: 0000000000000000 0000000000000000 0000000030d00800 000000045f61c022
[   25.870776] be40: ffffffc0ead04e00 0000000000000060 0000000000000002 ffffff800941b3f8
[   25.871520] be60: 0000000000000001 000000045f24df56 ffffff80093d4550 0000000002bc3244
[   25.872264] be80: 0000000000000000 ffffffc0ee6ebed0 ffffff8008953778 ffffffc0ee6ebed0
[   25.873008] bea0: ffffff800895377c 0000000060000145 ffffffc0ee6ebed0 ffffff8008953778
[   25.873750] bec0: ffffffffffffffff ffffffc0ead04e00
[   25.874209] [<ffffff80080827b4>] el1_irq+0xb4/0x140
[   25.874671] [<ffffff800895377c>] cpuidle_enter_state+0x1f8/0x25c
[   25.875237] [<ffffff8008953854>] cpuidle_enter+0x34/0x44
[   25.875744] [<ffffff80080ff2a4>] call_cpuidle+0x70/0x78
[   25.876240] [<ffffff80080ff554>] cpu_startup_entry+0x2a8/0x2b8
[   25.876782] [<ffffff800808be58>] secondary_start_kernel+0x124/0x140
[   25.877368] [<0000000002bc3188>] 0x2bc3188
[   36.132571] Watchdog detected hard LOCKUP on cpu 4
[   36.133001] ------------[ cut here ]------------
[   36.133479] WARNING: at kernel/watchdog.c:352
[   36.133889] Modules linked in: raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod
[   36.135102]
[   36.135272] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D         4.4.213-rk3399 #14
[   36.136012] Hardware name: Helios64 (DT)
[   36.136389] task: ffffffc0ee6e2a00 task.stack: ffffffc0ee6f0000
[   36.136945] PC is at watchdog_timer_fn+0x180/0x2c8
[   36.137405] LR is at watchdog_timer_fn+0x180/0x2c8
[   36.137863] pc : [<ffffff800815b7c0>] lr : [<ffffff800815b7c0>] pstate: 600001c5
[   36.138557] sp : ffffffc0f7f11d10
[   36.138874] x29: ffffffc0f7f11d10 x28: 0000000000000004
[   36.139397] x27: ffffff80092f88a0 x26: ffffffc0f7f14250
[   36.139920] x25: ffffffc0ee6f3da0 x24: 0000000000000000
[   36.140442] x23: ffffff80092f7000 x22: 0000000000000000
[   36.140966] x21: ffffff80092f7898 x20: ffffff80092ca2b0
[   36.141489] x19: ffffff80092ca228 x18: 0000000000000000
[   36.142011] x17: 0000000000000000 x16: 0000000000000000
[   36.142534] x15: 00000000000205db x14: 000000000000000a
[   36.143057] x13: 0000000000000005 x12: ffffff8089456d23
[   36.143580] x11: 0000000000000030 x10: ffffff8009456d2b
[   36.144102] x9 : 00000000fffffffe x8 : ffffff8008451ee8
[   36.144625] x7 : ffffff8009356c20 x6 : 0000000000000035
[   36.145148] x5 : 0000000000000000 x4 : 0000000000000000
[   36.145670] x3 : 0000000000000034 x2 : 00000040eec4a000
[   36.146192] x1 : 0000000000000003 x0 : 0000000000000026
[   36.146715]
[   36.146715] PC: 0xffffff800815b740:
[   36.147201] b740  91022673 d538d080 38606a61 34000041 3833681f 97ffff7e 52800020 a94153f3
[   36.148037] b760  a9425bf5 a94363f7 a9446bf9 a94573fb a8c67bfd d65f03c0 91020262 f8746860
[   36.148871] b780  91022274 f8626864 eb04001f 54000101 38746860 35fffbc0 b94016a3 90006702
[   36.149706] b7a0  911a3440 340000c3 9400df24 f8226860 f87c7b60 3834681f 17ffffd5 9400e31c
[   36.150540] b7c0  d4210000 f87c7b60 52800021 38346801 17ffffcf 97fe3578 f9444ee1 360808e1
[   36.151374] b7e0  b94012a1 910003e2 34000881 531f7821 d35efc00 8b21c2c1 eb00003f 540007e5
[   36.152208] b800  6b160016 540007a0 91022a74 d538d080 38606a81 34000101 91024273 f8736802
[   36.153041] b820  d5384101 eb01005f 54fff980 3834681f 17ffffc9 34000158 f0009b01 52800000
[   36.153876]
[   36.153876] LR: 0xffffff800815b740:
[   36.154362] b740  91022673 d538d080 38606a61 34000041 3833681f 97ffff7e 52800020 a94153f3
[   36.155195] b760  a9425bf5 a94363f7 a9446bf9 a94573fb a8c67bfd d65f03c0 91020262 f8746860
[   36.156029] b780  91022274 f8626864 eb04001f 54000101 38746860 35fffbc0 b94016a3 90006702
[   36.156862] b7a0  911a3440 340000c3 9400df24 f8226860 f87c7b60 3834681f 17ffffd5 9400e31c
[   36.157696] b7c0  d4210000 f87c7b60 52800021 38346801 17ffffcf 97fe3578 f9444ee1 360808e1
[   36.158530] b7e0  b94012a1 910003e2 34000881 531f7821 d35efc00 8b21c2c1 eb00003f 540007e5
[   36.159364] b800  6b160016 540007a0 91022a74 d538d080 38606a81 34000101 91024273 f8736802
[   36.160199] b820  d5384101 eb01005f 54fff980 3834681f 17ffffc9 34000158 f0009b01 52800000
[   36.161034]
[   36.161034] SP: 0xffffffc0f7f11c90:
[   36.161520] 1c90  00000000 00000000 092f7000 ffffff80 00000000 00000000 ee6f3da0 ffffffc0
[   36.162353] 1cb0  f7f14250 ffffffc0 092f88a0 ffffff80 00000004 00000000 f7f11d10 ffffffc0
[   36.163186] 1cd0  0815b7c0 ffffff80 f7f11d10 ffffffc0 0815b7c0 ffffff80 600001c5 00000000
[   36.164020] 1cf0  00000003 00000000 0000003f 00000000 00000000 00000080 ee000028 ffffffc0
[   36.164854] 1d10  f7f11d70 ffffffc0 08126544 ffffff80 f7f14250 ffffffc0 f7f13c00 ffffffc0
[   36.165688] 1d30  651bd210 00000008 f7f13c80 ffffffc0 092c4000 ffffff80 00000001 00000000
[   36.166522] 1d50  0941aed0 ffffff80 651bd210 00000008 0815b640 ffffff80 651bcb3a 00000008
[   36.167355] 1d70  f7f11de0 ffffffc0 08126b30 ffffff80 f7f13c00 ffffffc0 651bd210 00000008
[   36.168194]
[   36.168194] X7: 0xffffff8009356ba0:
[   36.168680] 6ba0  eded7540 ffffffc0 00000000 00000000 00000000 00000000 00110000 00000000
[   36.169513] 6bc0  000f0000 00000000 00000000 00000000 00040000 00000000 00080000 00000000
[   36.170347] 6be0  00000000 00000000 00000000 00000000 00000001 00000000 00000000 00000000
[   36.171180] 6c00  00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000
[   36.172013] 6c20  00000000 00000000 08e67466 ffffff80 0bd90bd9 dead4ead ffffffff 00000000
[   36.172846] 6c40  ffffffff ffffffff edf40000 ffffffc0 00040000 00000000 00000001 00000000
[   36.173679] 6c60  00000000 dead4ead ffffffff 00000000 ffffffff ffffffff 09356c78 ffffff80
[   36.174512] 6c80  09356c78 ffffff80 00000000 00000000 00000000 00000000 00000000 00000000
[   36.175348]
[   36.175348] X8: 0xffffff8008451e68:
[   36.175833] 1e68  9400054e aa1303e0 94000558 52800000 a94153f3 f94013f5 a8c37bfd d65f03c0
[   36.176667] 1e88  f9400413 17fffff6 f9400813 17fffff4 f9400c13 17fffff2 128002a0 17fffff5
[   36.177501] 1ea8  71001c1f 54000161 f9405ce0 f9400c00 b4000140 a9bf7bfd aa0603e2 aa0403e1
[   36.178335] 1ec8  910003fd 940004d2 a8c17bfd d65f03c0 128002a0 d65f03c0 12800160 d65f03c0
[   36.179169] 1ee8  a9bb7bfd 7100081f 910003fd a90153f3 aa0603f4 a9025bf5 a90363f7 aa0403f8
[   36.180002] 1f08  f9405cf3 54000181 f9400660 b4000a20 2a1403e2 aa1803e1 94000481 52800000
[   36.180837] 1f28  a94153f3 a9425bf5 a94363f7 a8c57bfd d65f03c0 71000c1f 54000061 f9400a60
[   36.181671] 1f48  17fffff3 71001c1f 54000061 f9400e60 17ffffef 35000820 51000420 7100041f
[   36.182507]
[   36.182507] X10: 0xffffff8009456cab:
[   36.183004] 6ca8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   36.183838] 6cc8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   36.184671] 6ce8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   36.185505] 6d08  00000000 00000000 00000000 00000000 00000000 00000000 00000001 30303020
[   36.186338] 6d28  312e3633 33333633 36205d38 20383264 312e3633 30353238 58205d37 203a3031
[   36.187172] 6d48  66667830 66666666 39303038 63363534 0a3a6261 35313830 30633762 70205d3e
[   36.188006] 6d68  74617473 36203a65 30303030 0a356331 31232039 3a750a34 0a0a3020 4620726f
[   36.188839] 6d88  6c0a4155 72702079 7265706f 69207974 6f6e206e 2f206564 65776f70 616d2d72
[   36.189673] 6da8  6567616e 746e656d 33666640 30303031 6f702f30 2d726577 746e6f63 6c6c6f72
[   36.190509]
[   36.190509] X12: 0xffffff8089456ca3:
[   36.191006] 6ca0  ******** ******** ******** ******** ******** ******** ******** ********
[   36.191843] 6cc0  ******** ******** ******** ******** ******** ******** ******** ********
[   36.192675] 6ce0  ******** ******** ******** ******** ******** ******** ******** ********
[   36.193509] 6d00  ******** ******** ******** ******** ******** ******** ******** ********
[   36.194342] 6d20  ******** ******** ******** ******** ******** ******** ******** ********
[   36.195176] 6d40  ******** ******** ******** ******** ******** ******** ******** ********
[   36.196009] 6d60  ******** ******** ******** ******** ******** ******** ******** ********
[   36.196842] 6d80  ******** ******** ******** ******** ******** ******** ******** ********
[   36.197676] 6da0  ******** ******** ******** ******** ******** ******** ******** ********
[   36.198515]
[   36.198515] X19: 0xffffff80092ca1a8:
[   36.199012] a1a8  ******** ******** ******** ******** ******** ******** ******** ********
[   36.199846] a1c8  ******** ******** ******** ******** ******** ******** ******** ********
[   36.200679] a1e8  ******** ******** ******** ******** ******** ******** ******** ********
[   36.201512] a208  ******** ******** ******** ******** ******** ******** ******** ********
[   36.202345] a228  ******** ******** ******** ******** ******** ******** ******** ********
[   36.203178] a248  ******** ******** ******** ******** ******** ******** ******** ********
[   36.204011] a268  ******** ******** ******** ******** ******** ******** ******** ********
[   36.204844] a288  ******** ******** ******** ******** ******** ******** ******** ********
[   36.205679]
[   36.205679] X20: 0xffffff80092ca230:
[   36.206176] a230  ******** ******** ******** ******** ******** ******** ***
                                                                              [   76.132626] INFO: rcu_sched detected stalls on CPUs/tasks:
[   76.133157]  5-...: (1 GPs behind) idle=ef1/140000000000000/0 softirq=769/774 fqs=0
[   76.133886]  (detected by 2, t=15043 jiffies, g=-84, c=-85, q=87)
[   76.134468] Task dump for CPU 5:
[   76.134785] modprobe        R  running task        0   297      1 0x00000012
[   76.135461] Call trace:
[   76.135714] [<ffffff8008084f9c>] __switch_to+0x9c/0xc8
[   76.136199] [<ffffff8008bb96f0>] __schedule+0x14c/0x654
[   76.136694] [<ffffff8008bb9c60>] schedule+0x68/0x7c
[   76.137155] [<ffffff8008082e1c>] ret_to_user+0x0/0xc4
[   76.137639] rcu_sched kthread starved for 15043 jiffies! g18446744073709551532 c18446744073709551531 f0x0 s3 ->state=0x1

 

[Automatic reset on kernel panic ?]

@gprovost on the first boot I was able to set the root password, then rebooted and it crashed with LK 4.4. Here is the dump

 

Quote

DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 323
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80183
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5af4
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Feb 03 2021 - 22:43:01 +0100)

SoC: Rockchip rk3399
Reset cause: WDOG
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
8508847 bytes read in 371 ms (21.9 MiB/s)
20770824 bytes read in 883 ms (22.4 MiB/s)
101557 bytes read in 12 ms (8.1 MiB/s)
2698 bytes read in 7 ms (376 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    8508783 Bytes = 8.1 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f56d2000, end f5eef56f ... OK
ERROR: reserving fdt memory region failed (addr=0 size=0)
   Loading Device Tree to 00000000f5650000, end 00000000f56d1fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.213-rk3399 (root@beast) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #14 SMP Wed Feb 3 20:52:28 CET 2021
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] PERCPU: Embedded 20 pages/cpu @ffffffc0f7ed2000 s42216 r8192 d31512 u81920
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: root=UUID=c99fadcc-25b5-485d-85e6-d859de7ee644 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=50f571e6-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xeec00000-0xf2c00000] (64MB)
[    0.000000] Memory: 3891628K/4061184K available (11582K kernel code, 1404K rwdata, 6148K rodata, 1088K init, 1956K bss, 169556K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff80091e0000 - 0xffffff80092f0000   (  1088 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008bd0000   ( 11584 KB)
[    0.000000]     .rodata : 0xffffff8008bd0000 - 0xffffff80091e0000   (  6208 KB)
[    0.000000]       .data : 0xffffff80092f0000 - 0xffffff800944f008   (  1405 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @ee900000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000ee890000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000ee8a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001504] Console: colour dummy device 80x25
[    0.003434] console [tty1] enabled
[    0.003483] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003548] pid_max: default: 32768 minimum: 301
[    0.003694] Security Framework initialized
[    0.003729] Yama: becoming mindful.
[    0.003780] AppArmor: AppArmor disabled by boot time parameter
[    0.003860] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003901] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004699] Initializing cgroup subsys io
[    0.004744] Initializing cgroup subsys memory
[    0.004802] Initializing cgroup subsys devices
[    0.004842] Initializing cgroup subsys freezer
[    0.004881] Initializing cgroup subsys net_cls
[    0.004919] Initializing cgroup subsys perf_event
[    0.004958] Initializing cgroup subsys net_prio
[    0.005001] Initializing cgroup subsys hugetlb
[    0.005037] Initializing cgroup subsys pids
[    0.005105] ftrace: allocating 41873 entries in 164 pages
[    0.119869] sched-energy: Sched-energy-costs installed from DT
[    0.119919] CPU0: update cpu_capacity 401
[    0.120005] ASID allocator initialised with 32768 entries
[    0.123080] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.123717] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.125238] Detected VIPT I-cache on CPU1
[    0.125277] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.125315] CPU1: using LPI pending table @0x00000000eeb30000
[    0.125375] CPU1: update cpu_capacity 401
[    0.125380] CPU1: Booted secondary processor [410fd034]
[    0.126188] Detected VIPT I-cache on CPU2
[    0.126221] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.126258] CPU2: using LPI pending table @0x00000000eeb60000
[    0.126315] CPU2: update cpu_capacity 401
[    0.126319] CPU2: Booted secondary processor [410fd034]
[    0.127178] Detected VIPT I-cache on CPU3
[    0.127210] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.127246] CPU3: using LPI pending table @0x00000000eebb0000
[    0.127301] CPU3: update cpu_capacity 401
[    0.127305] CPU3: Booted secondary processor [410fd034]
[    0.128138] Detected PIPT I-cache on CPU4
[    0.128163] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.128203] CPU4: using LPI pending table @0x00000000eebf0000
[    0.128240] CPU4: update cpu_capacity 1024
[    0.128243] CPU4: Booted secondary processor [410fd082]
[    0.128936] Detected PIPT I-cache on CPU5
[    0.128961] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.129001] CPU5: using LPI pending table @0x00000000ee020000
[    0.129038] CPU5: update cpu_capacity 1024
[    0.129042] CPU5: Booted secondary processor [410fd082]
[    0.129147] Brought up 6 CPUs
[    0.129868] SMP: Total of 6 processors activated.
[    0.129901] CPU features: detected feature: GIC system register CPU interface
[    0.129938] CPU features: detected feature: 32-bit EL0 Support
[    0.129975] CPU: All CPU(s) started at EL2
[    0.130046] alternatives: patching kernel code
[    0.131527] devtmpfs: initialized
[    0.149176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.149237] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.149740] xor: measuring software checksum speed
[    0.186867]    8regs     :  2855.000 MB/sec
[    0.226929]    8regs_prefetch:  2558.000 MB/sec
[    0.266990]    32regs    :  3210.000 MB/sec
[    0.307052]    32regs_prefetch:  2840.000 MB/sec
[    0.307072] xor: using function: 32regs (3210.000 MB/sec)
[    0.307112] pinctrl
                      [    0.703717] raid6: int64x2  xor()   608 MB/s
[    0.771834] raid6: int64x4  gen()   938 MB/s
[    0.839907] raid6: int64x4  xor()   673 MB/s
[    0.908029] raid6: int64x8  gen()   865 MB/s
[    0.976130] raid6: int64x8  xor()   608 MB/s
[    1.044251] raid6: neonx1   gen()   906 MB/s
[    1.112352] raid6: neonx1   xor()   679 MB/s
[    1.180449] raid6: neonx2   gen()  1520 MB/s
[    1.248560] raid6: neonx2   xor()   977 MB/s
[    1.316646] raid6: neonx4   gen()  1767 MB/s
[    1.384758] raid6: neonx4   xor()  1138 MB/s
[    1.452886] raid6: neonx8   gen()  1697 MB/s
[    1.520980] raid6: neonx8   xor()  1245 MB/s
[    1.521371] raid6: using algorithm neonx4 gen() 1767 MB/s
[    1.521864] raid6: .... xor() 1138 MB/s, rmw enabled
[    1.522323] raid6: using intx1 recovery algorithm
[    1.524543] vcc12v_dcin_bkup: supplied by vcc12v_dcin
[    1.525312] vcc12v_hdd: supplied by vcc12v_dcin_bkup
[    1.526192] vcc1v8_sys_s0: regulator get failed, ret=-517
[    1.527000] vcc0v9_s3: regulator get failed, ret=-517
[    1.527773] avdd_0v9_s0: regulator get failed, ret=-517
[    1.528664] avdd_1v8_s0: regulator get failed, ret=-517
[    1.544493] pcie_power: regulator get failed, ret=-517
[    1.545462] vcc3v3_sys_s3: regulator get failed, ret=-517
[    1.572575] vcc3v0_sd: regulator get failed, ret=-517
[    1.573869] vcc5v0_usb: regulator get failed, ret=-517
[    1.574929] vcc5v0_perdev: supplied by vcc12v_dcin_bkup
[    1.575864] pcie_power: supplied by vcc5v0_perdev
[    1.576524] vcc5v0_usb: supplied by vcc5v0_perdev
[    1.577113] vcc5v0_hdd: supplied by vcc12v_dcin_bkup
[    1.578243] vcc5v0_sys: supplied by vcc12v_dcin_bkup
[    1.579006] vcc3v3_sys_s3: supplied by vcc5v0_sys
[    1.579469] vcc0v9_s3: supplied by vcc3v3_sys_s3
[    1.580000] avdd_1v8_s0: supplied by vcc3v3_sys_s3
[    1.580518] vcc3v0_sd: supplied by vcc3v3_sys_s3
[    1.581997] usblan_power: supplied by vcc5v0_usb
[    1.583410] iommu: Adding device ff650000.vpu_service to group 0
[    1.584030] iommu: Adding device ff660000.rkvdec to group 1
[    1.584668] iommu: Adding device ff8f0000.vop to group 2
[    1.585239] iommu: Adding device ff900000.vop to group 3
[    1.586240] rk_iommu ff650800.iommu: can't get sclk
[    1.586968] rk_iommu ff660480.iommu: can't get sclk
[    1.587622] rk_iommu ff8f3f00.iommu: can't get sclk
[    1.588236] rk_iommu ff903f00.iommu: can't get sclk
[    1.589097] SCSI subsystem initialized
[    1.589870] usbcore: registered new interface driver usbfs
[    1.590419] usbcore: registered new interface driver hub
[    1.591001] usbcore: registered new device driver usb
[    1.591548] media: Linux media interface: v0.10
[    1.591991] Linux video capture interface: v2.00
[    1.592522] pps_core: LinuxPPS API ver. 1 registered
[    1.592983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.593841] PTP clock support registered
[    1.595427] Advanced Linux Sound Architecture Driver Initialized.
[    1.596875] NetLabel: Initializing
[    1.597198] NetLabel:  domain hash size = 128
[    1.597599] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.598106] NetLabel:  unlabeled traffic allowed by default
[    1.598889] rockchip-cpuinfo cpuinfo: Serial         : 85afff6e2668ee33
[    1.600046] clocksource: Switched to clocksource arch_sys_counter
[    1.647522] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.648410] NET: Registered protocol family 2
[    1.649286] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.650212] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.651734] TCP: Hash tables configured (established 32768 bind 32768)
[    1.652480] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    1.653191] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    1.654221] NET: Registered protocol family 1
[    1.655403] Trying to unpack rootfs image as initramfs...
[    2.075422] Freeing initrd memory: 8308K
[    2.076355] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.077194] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    2.079537] kvm [1]: 8-bit VMID
[    2.079838] kvm [1]: Hyp mode initialized successfully
[    2.080475] kvm [1]: interrupt-controller@fff20000 IRQ10
[    2.081168] kvm [1]: timer IRQ12
[    2.084938] audit: initializing netlink subsys (disabled)
[    2.085489] audit: type=2000 audit(2.008:1): initialized
[    2.086366] Initialise system trusted keyring
[    2.087176] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.095235] VFS: Disk quotas dquot_6.6.0
[    2.095763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.097900] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.099111] fuse init (API version 7.23)
[    2.100082] JFS: nTxBlock = 8192, nTxLock = 65536
[    2.106011] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.108457] Key type big_key registered
[    2.108824]
[    2.108824] TEE Core Framework initialization (ver 1:0.1)
[    2.109480] TEE armv7 Driver initialization
[    2.110347] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    2.110951] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    2.111710] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    2.117773] Key type asymmetric registered
[    2.118164] Asymmetric key parser 'x509' registered
[    2.118805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.119642] io scheduler noop registered
[    2.120016] io scheduler deadline registered (default)
[    2.120539] io scheduler cfq registered
[    2.122489] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[    2.130329] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    2.131123] rk-vcodec ff650000.vpu_service: probe device
[    2.131839] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    2.133160] rk-vcodec ff650000.vpu_service: could not find power_model node
[    2.133800] rk-vcodec ff650000.vpu_service: init success
[    2.134523] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    2.135444] rk-vcodec ff660000.rkvdec: probe device
[    2.136114] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    2.137072] rk-vcodec ff660000.rkvdec: could not find power_model node
[    2.137663] rk-vcodec ff660000.rkvdec: init success
[    2.139630] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.140392] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.142647] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.143344] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.145304] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.147460] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    2.149308] [drm] Initialized drm 1.1.0 20060810
[    2.153240] [drm] Rockchip DRM driver version: v1.0.1
[    2.156097] Unable to detect cache hierarchy for CPU 0
[    2.157391] brd: module loaded
[    2.163087] loop: module loaded
[    2.163761] lkdtm: No crash points registered, enable through debugfs
[    2.165538] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.166622] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    2.168310] rockchip-spi ff1e0000.spi: no high_speed pinctrl state
[    2.169507] rockchip-spi ff200000.spi: no high_speed pinctrl state
[    2.172168] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.172812] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.173334] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    2.173869] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.174599] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.175235] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.180795] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.181420] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.181880]  Ring mode enabled
[    2.182165]  DMA HW capability register supported
[    2.182568]  Normal descriptors
[    2.182899]  RX Checksum Offload Engine supported (type 2)
[    2.183404]  TX Checksum insertion supported
[    2.183793]  Wake-Up On Lan supported
[    2.184179]  Enable RX Mitigation via HW Watchdog Timer
[    2.272786] libphy: stmmac: probed
[    2.273128] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.273718] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    2.275697] usbcore: registered new interface driver rndis_wlan
[    2.276670] Rockchip WiFi SYS interface (V1.00) ...
[    2.277267] usbcore: registered new interface driver cdc_ether
[    2.277856] usbcore: registered new interface driver rndis_host
[    2.280687] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    2.286282] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.288091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.288697] ehci-pci: EHCI PCI platform driver
[    2.289167] ehci-platform: EHCI generic platform driver
[    2.290186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.290768] ohci-platform: OHCI generic platform driver
[    2.292092] usbcore: registered new interface driver cdc_acm
[    2.292612] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.293373] usbcore: registered new interface driver cdc_wdm
[    2.293965] usbcore: registered new interface driver usbserial
[    2.294522] usbcore: registered new interface driver usbserial_generic
[    2.295128] usbserial: USB Serial support registered for generic
[    2.296516] usbcore: registered new interface driver iforce
[    2.297071] usbcore: registered new interface driver xpad
[    2.297726] usbcore: registered new interface driver usbtouchscreen
[    2.298295] <<-GTP-INFO->> GTP driver installing
[    2.299088] sensor_register_slave:mma8452,id=17
[    2.299508] sensor_register_slave:lis3dh,id=7
[    2.299913] sensor_register_slave:mma7660,id=18
[    2.300360] sensor_register_slave:lsm303d,id=22
[    2.300779] sensor_register_slave:mpu6880_acc,id=24
[    2.301231] sensor_register_slave:mpu6500_acc,id=25
[    2.301682] sensor_register_slave:lsm330_acc,id=26
[    2.302122] sensor_register_slave:akm8975,id=30
[    2.302539] sensor_register_slave:akm8963,id=31
[    2.302956] sensor_register_slave:l3g4200d,id=45
[    2.303383] sensor_register_slave:l3g20d,id=46
[    2.303800] sensor_register_slave:ewtsa,id=47
[    2.304216] sensor_register_slave:lsm330_gyro,id=51
[    2.304669] sensor_register_slave:cm3217,id=53
[    2.305085] sensor_register_slave:cm3218,id=54
[    2.305987] i2c /dev entries driver
[    2.307548] rk808 0-001b: Pmic Chip id: 0x0
[    2.310659] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.311282] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    2.311963] DCDC_REG1: supplied by vcc5v0_sys
[    2.313279] DCDC_REG2: supplied by vcc5v0_sys
[    2.314367] DCDC_REG3: supplied by vcc5v0_sys
[    2.315164] DCDC_REG4: supplied by vcc5v0_sys
[    2.315967] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    2.316513] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    2.317087] LDO_REG1: supplied by vcc5v0_sys
[    2.318117] LDO_REG2: supplied by vcc5v0_sys
[    2.319018] LDO_REG3: supplied by vcc5v0_sys
[    2.320446] LDO_REG4: supplied by vcc5v0_sys
[    2.321861] LDO_REG5: supplied by vcc5v0_sys
[    2.322761] LDO_REG6: supplied by vcc5v0_sys
[    2.324206] LDO_REG7: supplied by vcc5v0_sys
[    2.325125] LDO_REG8: supplied by vcc5v0_sys
[    2.326550] SWITCH_REG1: supplied by vcc3v3_sys_s3
[    2.327332] SWITCH_REG2: supplied by vcc3v3_sys_s3
[    2.331272] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    2.333030] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.333725] fan53555-reg: supplied by vcc5v0_sys
[    2.336406] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    2.337084] fan53555-reg: supplied by vcc5v0_sys
[    2.339268] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80097ce000
[    2.341862] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80097d0000
[    2.343015] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097d2000
[    2.348130] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_UFP
[    2.349084] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input0
[    2.350058] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097d4000
[    2.351213] rk3x-i2c ff3e0000.i2c: Initialized RK3xxx I2C bus at ffffff80097d6000
[    2.353845] usbcore: registered new interface driver uvcvideo
[    2.354377] USB Video Class driver (1.1.1)
[    2.357224] B
                [    2.504385] Error: Driver 'ov7750' is already registered, aborting...
[    2.504982] Error: Driver 'ov8858' is already registered, aborting...
[    2.505663] Error: Driver 'sc031gs' is already registered, aborting...
[    2.506901] Registered cp15_barrier emulation handler
[    2.507462] Registered setend emulation handler
[    2.508179] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    2.509105] registered taskstats version 1
[    2.509262] mmc0: new high speed SDHC card at address aaaa
[    2.510019] Loading compiled-in X.509 certificates
[    2.510058] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[    2.511351]  mmcblk0: p1
[    2.513226] Btrfs loaded, integrity-checker=on
[    2.513783] BTRFS: selftest: Running btrfs free space cache tests
[    2.514378] BTRFS: selftest: Running extent only tests
[    2.514879] BTRFS: selftest: Running bitmap only tests
[    2.515383] BTRFS: selftest: Running bitmap and extent tests
[    2.515939] BTRFS: selftest: Running space stealing from bitmap to extent
[    2.517914] BTRFS: selftest: Free space cache tests finished
[    2.518443] BTRFS: selftest: Running extent buffer operation tests
[    2.518987] BTRFS: selftest: Running btrfs_split_item tests
[    2.519600] BTRFS: selftest: Running find delalloc tests
[    2.564281] mmc1: new HS200 MMC card at address 0001
[    2.565691] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[    2.566613] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[    2.567581] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[    2.568618] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[    2.684786] BTRFS: selftest: Running btrfs_get_extent tests
[    2.685441] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.686028] BTRFS: selftest: Running outstanding_extents tests
[    2.686587] BTRFS: selftest: Running qgroup tests
[    2.687009] BTRFS: selftest: Qgroup basic add
[    2.687432] BTRFS: selftest: Qgroup multiple refs test
[    2.748598] random: nonblocking pool is initialized
[    2.759705] Key type encrypted registered
[    2.761474] rga2: Driver loaded successfully ver:3.02
[    2.762501] rga2: Module initialized.
[    2.764966] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator
[    2.769845] rockchip-pcie f8000000.pcie: bus-scan-delay-ms in device tree is 2000 ms
[    2.770578] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    2.771213] PCI host bridge /pcie@f8000000 ranges:
[    2.771682]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    2.772441]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.796280] rockchip-pcie f8000000.pcie: invalid power supply
[    2.901373] rockchip-pcie f8000000.pcie: wait 2000 ms (from device tree) before bus scan
[    3.009949] vendor storage:20190527 ret = 0
[    4.904706] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    4.905358] pci_bus 0000:00: root bus resource [bus 00-1f]
[    4.905893] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    4.906550] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    4.908223] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    4.909447] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    4.910161] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    4.910870] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    4.911579] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    4.912317] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    4.920392] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
[    4.921038] pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    4.921614] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    4.922304] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    4.922952] pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x107f]
[    4.923530] pci 0000:01:00.0: BAR 1: assigned [io  0x1080-0x10ff]
[    4.924130] pci 0000:01:00.0: BAR 2: assigned [io  0x1100-0x117f]
[    4.924709] pci 0000:01:00.0: BAR 3: assigned [io  0x1180-0x11ff]
[    4.925287] pci 0000:01:00.0: BAR 4: assigned [io  0x1200-0x127f]
[    4.925865] pci 0000:00:00.0: PCI bridge to [bus 01]
[    4.926339] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    4.926909] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    4.927706] pcieport 0000:00:00.0: enabling device (0000 -> 0003)
[    4.928696] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    4.929346] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.930304] ahci 0000:01:00.0: enabling device (0000 -> 0003)
[    4.931242] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    4.931953] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    4.932752] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    4.938279] scsi host0: ahci
[    4.939200] scsi host1: ahci
[    4.940767] scsi host2: ahci
[    4.941995] scsi host3: ahci
[    4.942903] scsi host4: ahci
[    4.943409] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 255
[    4.944130] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 256
[    4.944831] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 257
[    4.945529] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 258
[    4.946228] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 259
[    4.952497] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.953456] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
[    4.954338] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    4.955190] xhci-hcd xhci-hcd.2.auto: irq 223, io mem 0xfe800000
[    4.956021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.956678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.957354] usb usb1: Product: xHCI Host Controller
[    4.957808] usb usb1: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    4.958365] usb usb1: SerialNumber: xhci-hcd.2.auto
[    4.959503] hub 1-0:1.0: USB hub found
[    4.959895] hub 1-0:1.0: 1 port detected
[    4.960656] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    4.961319] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[    4.962096] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.962959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    4.963589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.964280] usb usb2: Product: xHCI Host Controller
[    4.964735] usb usb2: Manufacturer: Linux 4.4.213-rk3399 xhci-hcd
[    4.965292] usb usb2: SerialNumber: xhci-hcd.2.auto
[    4.966225] hub 2-0:1.0: USB hub found
[    4.966610] hub 2-0:1.0: 1 port detected
[    4.969604] xhci-hcd xhci-hcd.2.auto: remove, state 1
[    4.970116] usb usb2: USB disconnect, device number 1
[    4.987102] xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds.
[    4.987775] xhci-hcd xhci-hcd.2.auto: Host controller not halted, aborting reset.
[    4.988512] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered
[    4.989283] xhci-hcd xhci-hcd.2.auto: remove, state 1
[    4.989784] usb usb1: USB disconnect, device number 1
[   12.076053] BUG: spinlock lockup suspected on CPU#0, swapper/0/0
[   12.076639]  lock: 0xffffffc0f7f3f200, .magic: dead4ead, .owner: kworker/u12:6/220, .owner_cpu: 5
[   12.077469] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.213-rk3399 #14
[   12.078088] Hardware name: Helios64 (DT)
[   12.078465] Call trace:
[   12.078724] [<ffffff800808803c>] dump_backtrace+0x0/0x21c
[   12.079234] [<ffffff800808827c>] show_stack+0x24/0x30
[   12.079721] [<ffffff80084e3c68>] dump_stack+0xa4/0xcc
[   12.080207] [<ffffff80081939d8>] spin_dump+0x84/0xa4
[   12.080682] [<ffffff8008105b74>] do_raw_spin_lock+0xdc/0x164
[   12.081217] [<ffffff8008bbccf0>] _raw_spin_lock+0x20/0x2c
[   12.081727] [<ffffff80080fb160>] sched_rt_period_timer+0x11c/0x268
[   12.082307] [<ffffff8008126544>] __hrtimer_run_queues+0x1bc/0x284
[   12.082872] [<ffffff8008126b30>] hrtimer_interrupt+0xac/0x1bc
[   12.083416] [<ffffff800897ccd4>] arch_timer_handler_phys+0x3c/0x4c
[   12.083996] [<ffffff8008116a70>] handle_percpu_devid_irq+0xe8/0x178
[   12.084584] [<ffffff8008112610>] generic_handle_irq+0x2c/0x44
[   12.085126] [<ffffff800811298c>] __handle_domain_irq+0xb8/0xbc
[   12.085669] [<ffffff8008080e7c>] gic_handle_irq+0xc8/0x180
[   12.086186] Exception stack(0xffffff80092f3d70 to 0xffffff80092f3ea0)
[   12.086786] 3d60:                                   ffffffc0f7edb200 00000040eec0e000
[   12.087531] 3d80: ffffffc0f7edb200 ffffff80092f3e80 00ffffffffffffff 0000000021169dbf
[   12.088275] 3da0: 00000000000009a6 ffffffc0f7ed80c0 ffffff8009301a60 ffffff80092f3ec0
[   12.089008] 3dc0: 0000000000000a30 0000000000000191 0000000000000063 0000000100000000
[   12.089742] 3de0: 0000000000000001 0000000000000001 ffffff8008ef47c9 ffffff8008ef47c9
[   12.090485] 3e00: 0000000000000000 000000012a05f3f5 ffffffc0ebbfd000 0000000000000060
[   12.091219] 3e20: 0000000000000000 ffffff800941b3f8 0000000000000000 000000012a0576a2
[   12.091963] 3e40: ffffff80093d4490 0000000002bc323c 00000000031e001c ffffff80092f3ea0
[   12.092697] 3e60: ffffff8008953748 ffffff80092f3ea0 ffffff800895377c 0000000060000145
[   12.093430] 3e80: ffffff80092f3ea0 ffffff8008953748 ffffffffffffffff ffffffc0ebbfd000
[   12.094174] [<ffffff80080827b4>] el1_irq+0xb4/0x140
[   12.094639] [<ffffff800895377c>] cpuidle_enter_state+0x1f8/0x25c
[   12.095204] [<ffffff8008953854>] cpuidle_enter+0x34/0x44
[   12.095703] [<ffffff80080ff2a4>] call_cpuidle+0x70/0x78
[   12.096200] [<ffffff80080ff554>] cpu_startup_entry+0x2a8/0x2b8
[   12.096743] [<ffffff8008bb8848>] rest_init+0x74/0x7c
[   12.097216] [<ffffff80091e0b84>] start_kernel+0x3c8/0x3ec
[   12.097723] [<ffffff80091e01c4>] __primary_switched+0x30/0x6c

 

[Automatic reset on kernel panic ?]

@gprovost I've set the kernel.panic , installed the watchdog and disabled the dynamic frequency switching but it still hangs whilst booting and doesn't reset (I assume because it hasn't got to the point where the watchdog service is loaded). This makes it unuseable because I can't risk it crashing with the HDDs spinning and the fans not running. Even when it does occasionally boot it still crashes whilst doing an rsync. Until you resolve this issue it is no better to me than an expensive doorstop which is deeply deeply frustrating.

[Automatic reset on kernel panic ?]

Thanks for the suggestion, adding extra hardware could be an option but I'm ideally hoping there is a solution to this issue within the Helios64 hardware if possible.

[Automatic reset on kernel panic ?]

When there is a kernel panic the fans stop which causes the HDD and CPU temperatures to rise unchecked. I've just come back to find my board has crashed again and the HDD temperatures had risen above 60c which is not good. Is there a watchdog or boot setting to automatically reset the processor after a kernel panic ?

[Kernel panic in 5.10.12-rockchip64 21.02.1]

and another ...

 

Quote

[   57.770744] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: sched_ttwu_pending+0x160/0x160

[   57.771683] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.10.16-rockchip64 #21.02.2
[   57.772459] Hardware name: Helios64 (DT)
[   57.772808] Call trace:
[   57.773034]  dump_backtrace+0x0/0x200
[   57.773363]  show_stack+0x18/0x68
[   57.773667]  dump_stack+0xcc/0x124
[   57.773971]  panic+0x174/0x374
[   57.774247]  __stack_chk_fail+0x3c/0x40
[   57.774590]  send_call_function_single_ipi+0x0/0x20
[   57.775024]  flush_smp_call_function_queue+0x114/0x250
[   57.775479]  generic_smp_call_function_single_interrupt+0x14/0x20
[   57.776017]  ipi_handler+0x7c/0x370
[   57.776331]  handle_percpu_devid_fasteoi_ipi+0x9c/0x1f0
[   57.776793]  generic_handle_irq+0x30/0x48
[   57.777149]  __handle_domain_irq+0x94/0x108
[   57.777523]  gic_handle_irq+0xc0/0x140
[   57.777856]  el1_irq+0xc0/0x180
[   57.778140]  arch_cpu_idle+0x18/0x28
[   57.778458]  default_idle_call+0x44/0x1bc
[   57.778814]  do_idle+0x204/0x278
[   57.779103]  cpu_startup_entry+0x28/0x60
[   57.779451]  secondary_start_kernel+0x170/0x180
[   57.779858] SMP: stopping secondary CPUs
[   57.780212] Kernel Offset: disabled
[   57.780523] CPU features: 0x0240022,6100200c
[   57.780900] Memory Limit: none
[   57.781186] Rebooting in 90 seconds..

 

[Kernel panic in 5.10.12-rockchip64 21.02.1]

Unfortunately not for me

 

Quote

• [   46.779894] ------------[ cut here ]------------
• [   46.780314] kernel BUG at arch/arm64/kernel/traps.c:407!
• [   46.780785] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
• [   46.781271] Modules linked in: snd_soc_hdmi_codec snd_soc_rockchip_i2s r8152 hantro_vpu(C) rockchip_vdec(C) snd_soc_core rockchipdrm v4l2_h264 videobuf2_dma_contig dw_mipi_dsi snd_pcm_dmaengine rockchip_rga dw_hdmi videobuf2_vmalloc snd_pcm v4l2_mem2mem analogix_dp videobuf2_dma_sg drm_kms_helper videobuf2_memops videobuf2_v4l2 snd_timer videobuf2_common cec fusb302 panfrost tcpm snd rc_core gpio_charger leds_pwm gpu_sched pwm_fan typec soundcore videodev drm mc drm_panel_orientation_quirks gpio_beeper cpufreq_dt zfs(POE) zunicode(POE) zzstd(OE) zlua(OE) zcommon(POE) nfsd znvpair(POE) zavl(POE) icp(POE) auth_rpcgss spl(OE) nfs_acl ledtrig_netdev lockd grace lm75 sunrpc ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys
• [   46.788176] CPU: 4 PID: 0 Comm: swapper/4 Tainted: P         C OE     5.10.16-rockchip64 #21.02.2
• [   46.788180] Hardware name: Helios64 (DT)
• [   46.788195] pstate: 00000085 (nzcv daIf -PAN -UAO -TCO BTYPE=--)
•          Starting Create Volatile Files and Directories[   46.789848] pc : do_undefinstr+0x2ec/0x318
• ...
• [   46.790690] lr : do_undefinstr+0x1e4/0x318
• [   46.791118] sp : ffff800011c0b9a0
• [   46.791413] x29: ffff800011c0b9a0 x28: ffff000040310e80
• [   46.791888] x27: ffff000040004300 x26: ffff800011cebde0
• [   46.792363] x25: 0000000000000001 x24: 0000000000000000
• [   46.792837] x23: 00000000a0000085 x22: ffff800010126f5c
• [   46.793310] x21: ffff800011c0bb80 x20: ffff800011c0ba30
• [   46.793783] x19: ffff8000118b9948 x18: 0000000000000000
• [   46.794257] x17: 0000000000000000 x16: 0000000000000000
• [   46.794730] x15: 0000052528725e34 x14: 0000000000000040
• [   46.795203] x13: 0000000000000156 x12: 0000000000000001
• [   46.795677] x11: 0000000000000040 x10: ffff000040004368
• [   46.796150] x9 : ffff000040004360 x8 : ffff0000404004b8
• [   46.796623] x7 : 0000000000000000 x6 : ffff800011c0b9f8
• [   46.797096] x5 : 00000000d5300000 x4 : ffff8000118c6270
• [   46.797570] x3 : 0000000000010002 x2 : 0000000000010001
• [   46.798043] x1 : ffff000040310e80 x0 : 00000000a0000085
• [   46.798518] Call trace:
• [   46.798740]  do_undefinstr+0x2ec/0x318
• [   46.799079]  el1_undef+0x30/0x50
• [   46.799368]  el1_sync_handler+0x88/0xe8
• [   46.799711]  el1_sync+0x7c/0x100
• [   46.800002]  __rcu_read_unlock+0x34/0x158
• [   46.800359]  irq_find_mapping+0x70/0xf0
• [   46.800701]  __handle_domain_irq+0xe4/0x108
• [   46.801076]  gic_handle_irq+0xc0/0x140
• [   46.801410]  el1_irq+0xc0/0x180
• [   46.801693]  arch_cpu_idle+0x18/0x28
• [   46.802012]  default_idle_call+0x44/0x1bc
• [   46.802369]  do_idle+0x204/0x278
• [   46.802658]  cpu_startup_entry+0x24/0x60
• [   46.803011]  secondary_start_kernel+0x170/0x180
• [   46.803417] Code: f9401bf7 17ffff7d a9025bf5 f9001bf7 (d4210000)
• [   46.803964] ---[ end trace 127c975f587b5800 ]---
• [   46.804374] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt
• [   46.805025] SMP: stopping secondary CPUs
• [   46.805382] Kernel Offset: disabled
• [   46.805694] CPU features: 0x0240022,6100200c
• [   46.806070] Memory Limit: none
• [   46.806354] Rebooting in 90 seconds..

 

[Kernel panic in 5.10.12-rockchip64 21.02.1]

and again on the reboot

 

Quote

|_| |_|\___|_|_|\___/|___/\___/   |_|

Welcome to Armbian 21.02.1 Buster with Linux 5.10.12-rockchip64

No end-user support: work in progress

System load:   24%              Up time:       1 min
Memory usage:  4% of 3.71G      IP:            195.198.8.121
CPU temp:      54°C             Usage of /:    6% of 29G

[ General system configuration (beta): armbian-config ]

helios@helios64:~$ apt-get update
Reading package lists... Done
E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
W: Problem unlinking the file /var/cache/apt/pkgcache.bin - RemoveCaches (13: Permission denied)
W: Problem unlinking the file /var/cache/apt/srcpkgcache.bin - RemoveCaches (13: Permission denied)
helios@helios64:~$ exit
logout

Armbian 21.02.1 Buster ttyS2

helios64 login: root
Password:
Last login: Fri Feb 19 16:23:53 GMT 2021 on ttyS2
 _   _      _ _            __   _  _
| | | | ___| (_) ___  ___ / /_ | || |
| |_| |/ _ \ | |/ _ \/ __| '_ \| || |_
|  _  |  __/ | | (_) \__ \ (_) |__   _|
|_| |_|\___|_|_|\___/|___/\___/   |_|

Welcome to Armbian 21.02.1 Buster with Linux 5.10.12-rockchip64

No end-user support: work in progress

System load:   18%              Up time:       2 min
Memory usage:  4% of 3.71G      IP:            195.198.8.121
CPU temp:      52°C             Usage of /:    6% of 29G

root@helios64:~# apt-get update
Get:1 http://security.debian.org buster/updates InRelease [65.4 kB]
Get:2 http://deb.debian.org/debian buster InRelease [122 kB]
Get:4 http://deb.debian.org/debian buster-updates InRelease [51.9 kB]
Get:5 http://deb.debian.org/debian buster-backports InRelease [46.7 kB]
Get:6 http://security.debian.org buster/updates/main arm64 Packages [329 kB]
Get:7 http://security.debian.org buster/updates/main armhf Packages [328 kB]
Get:8 http://deb.debian.org/debian buster/main armhf Packages [10.5 MB]
Get:3 https://mirrors.dotsrc.org/armbian-apt buster InRelease [18.3 kB]
Get:9 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 Packages [928 kB]
Get:10 https://mirrors.dotsrc.org/armbian-apt buster/main armhf Packages [778 kB]
Get:11 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 Contents (deb) [13.4 MB]
Get:12 https://mirrors.dotsrc.org/armbian-apt buster/main armhf Contents (deb) [20.7 MB]
Get:13 http://deb.debian.org/debian buster-updates/main armhf Packages.diff/Index [5,656 B]
Get:14 http://deb.debian.org/debian buster-updates/main arm64 Packages.diff/Index [5,656 B]
Get:15 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb).diff/Index [5,164 B]
Get:16 http://deb.debian.org/debian buster-updates/main armhf Contents (deb).diff/Index [5,164 B]
Get:17 http://deb.debian.org/debian buster-backports/main armhf Packages.diff/Index [27.8 kB]
Get:18 http://deb.debian.org/debian buster-backports/main arm64 Packages.diff/Index [27.8 kB]
Get:19 http://deb.debian.org/debian buster-backports/main armhf Contents (deb).diff/Index [27.9 kB]
Get:20 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb).diff/Index [27.9 kB]
Get:21 http://deb.debian.org/debian buster-backports/contrib armhf Packages.diff/Index [24.8 kB]
Get:22 http://deb.debian.org/debian buster-backports/contrib arm64 Packages.diff/Index [24.8 kB]
Get:23 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb).diff/Index [20.9 kB]
Get:24 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb).diff/Index [19.4 kB]
Get:25 http://deb.debian.org/debian buster-updates/main armhf Packages 2021-02-07-1359.56.pdiff [2,328 B]
Get:26 http://deb.debian.org/debian buster-updates/main arm64 Packages 2021-02-07-1359.56.pdiff [2,291 B]
Get:27 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb) 2021-02-07-1359.56.pdiff [11.8 kB]
Get:28 http://deb.debian.org/debian buster-updates/main armhf Contents (deb) 2021-02-07-1359.56.pdiff [11.9 kB]
Get:25 http://deb.debian.org/debian buster-updates/main armhf Packages 2021-02-07-1359.56.pdiff [2,328 B]
Get:29 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-04-1402.43.pdiff [476 B]
Get:27 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb) 2021-02-07-1359.56.pdiff [11.8 kB]
Get:26 http://deb.debian.org/debian buster-updates/main arm64 Packages 2021-02-07-1359.56.pdiff [2,291 B]
Get:30 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-04-2001.58.pdiff [594 B]
Get:28 http://deb.debian.org/debian buster-updates/main armhf Contents (deb) 2021-02-07-1359.56.pdiff [11.9 kB]
Get:31 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-0200.10.pdiff [1,741 B]
Get:32 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-0800.01.pdiff [1,040 B]
Get:33 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-1405.08.pdiff [473 B]
Get:34 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-2000.51.pdiff [687 B]
Get:35 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-06-1404.54.pdiff [204 B]
Get:36 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-06-1959.41.pdiff [191 B]
Get:37 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-0159.49.pdiff [803 B]
Get:38 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-0759.53.pdiff [256 B]
Get:39 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-1359.56.pdiff [180 B]
Get:40 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-2004.03.pdiff [1,066 B]
Get:41 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-0201.53.pdiff [187 B]
Get:42 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-0800.00.pdiff [274 B]
Get:43 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-1400.04.pdiff [299 B]
Get:44 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-1959.50.pdiff [711 B]
Get:45 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-0159.52.pdiff [327 B]
Get:46 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-1359.56.pdiff [1,260 B]
Get:47 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-2000.45.pdiff [2,100 B]
Get:48 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-0159.55.pdiff [1,118 B]
Get:49 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-0759.42.pdiff [597 B]
Get:50 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-1359.42.pdiff [824 B]
Get:51 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-1959.58.pdiff [2,225 B]
Get:52 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-0159.46.pdiff [2,278 B]
Get:53 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-0759.49.pdiff [294 B]
Get:54 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-1400.04.pdiff [6,439 B]
Get:55 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-1959.46.pdiff [13.1 kB]
Get:56 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-12-0159.45.pdiff [1,800 B]
Get:57 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-12-0801.37.pdiff [188 B]
Get:58 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-13-0159.59.pdiff [4,182 B]
Get:59 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-13-1359.55.pdiff [932 B]
Get:60 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-14-1359.48.pdiff [206 B]
Get:61 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-14-2000.12.pdiff [199 B]
Get:62 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-15-0200.05.pdiff [191 B]
Get:63 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-16-1400.52.pdiff [2,043 B]
Get:64 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-16-2000.50.pdiff [2,562 B]
Get:65 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-0159.56.pdiff [2,647 B]
Get:66 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-0759.56.pdiff [1,412 B]
Get:67 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-2000.05.pdiff [786 B]
Get:67 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-2000.05.pdiff [786 B]
Get:68 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-04-1402.43.pdiff [476 B]
Get:69 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-04-2001.58.pdiff [595 B]
Get:70 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-0200.10.pdiff [1,745 B]
Get:71 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-0800.01.pdiff [1,040 B]
Get:72 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-1405.08.pdiff [472 B]
Get:73 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-2000.51.pdiff [690 B]
Get:74 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-06-1404.54.pdiff [205 B]
Get:75 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-06-1959.41.pdiff [190 B]
Get:76 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-0159.49.pdiff [799 B]
Get:77 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-0759.53.pdiff [256 B]
Get:78 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-1359.56.pdiff [196 B]
Get:79 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-2004.03.pdiff [1,069 B]
Get:80 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-0201.53.pdiff [189 B]
Get:81 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-0800.00.pdiff [275 B]
Get:82 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-1400.04.pdiff [408 B]
Get:83 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-1959.50.pdiff [715 B]
Get:84 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-0159.52.pdiff [331 B]
Get:85 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-1359.56.pdiff [1,262 B]
Get:86 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-2000.45.pdiff [2,143 B]
Get:87 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-0159.55.pdiff [1,121 B]
Get:88 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-0759.42.pdiff [597 B]
Get:89 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-1359.42.pdiff [823 B]
Get:90 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-1959.58.pdiff [2,090 B]
Get:91 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-0159.46.pdiff [2,518 B]
Get:92 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-0759.49.pdiff [295 B]
Get:93 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-1400.04.pdiff [6,600 B]
Get:94 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-1959.46.pdiff [14.1 kB]
Get:95 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-12-0159.45.pdiff [910 B]
Get:96 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-12-0801.37.pdiff [188 B]
Get:97 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-13-1359.55.pdiff [928 B]
Get:98 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-14-1359.48.pdiff [206 B]
Get:99 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-14-2000.12.pdiff [203 B]
Get:100 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-15-0200.05.pdiff [193 B]
Get:101 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-16-1400.52.pdiff [2,044 B]
Get:102 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-16-2000.50.pdiff [2,557 B]
Get:103 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-0159.56.pdiff [2,613 B]
Get:104 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-0759.56.pdiff [1,416 B]
Get:105 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-2000.05.pdiff [785 B]
Get:105 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-2000.05.pdiff [785 B]
Get:106 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-04-1402.43.pdiff [208 B]
Get:107 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-0200.10.pdiff [289 B]
Get:108 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-0800.01.pdiff [546 B]
Get:109 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-1405.08.pdiff [197 B]
Get:110 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-2000.51.pdiff [88 B]
Get:111 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-06-1404.54.pdiff [8,655 B]
Get:112 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-07-0759.53.pdiff [520 B]
Get:113 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-07-2004.03.pdiff [221 B]
Get:114 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-08-0800.00.pdiff [5,192 B]
Get:115 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-08-1959.50.pdiff [353 B]
Get:116 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-0159.52.pdiff [373 B]
Get:117 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-1359.56.pdiff [292 B]
Get:118 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-2000.45.pdiff [424 B]
Get:119 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-0159.55.pdiff [948 B]
Get:120 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-0759.42.pdiff [262 B]
Get:121 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-1359.42.pdiff [1,933 B]
Get:122 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-1959.58.pdiff [525 B]
Get:123 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-0159.46.pdiff [2,215 B]
Get:124 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-1400.04.pdiff [384 kB]
Get:125 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-1959.46.pdiff [113 kB]
Get:126 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-12-0159.45.pdiff [4,533 B]
Get:127 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-12-0801.37.pdiff [193 kB]
Get:128 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-13-0159.59.pdiff [271 kB]
Get:129 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-13-1359.55.pdiff [501 B]
Get:130 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-14-1359.48.pdiff [32 B]
Get:131 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-14-2000.12.pdiff [166 B]
Get:132 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-15-0200.05.pdiff [68 B]
Get:133 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-16-1400.52.pdiff [10.4 kB]
Get:134 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-16-2000.50.pdiff [3,168 B]
Get:135 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-0159.56.pdiff [270 B]
Get:136 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-0759.56.pdiff [305 B]
Get:137 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-2000.05.pdiff [139 B]
Get:137 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-2000.05.pdiff [139 B]
Get:138 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-04-1402.43.pdiff [207 B]
Get:139 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-0200.10.pdiff [291 B]
Get:140 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-0800.01.pdiff [548 B]
Get:141 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-1405.08.pdiff [195 B]
Get:142 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-2000.51.pdiff [86 B]
Get:143 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-06-1404.54.pdiff [8,638 B]
Get:144 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-07-0759.53.pdiff [522 B]
Get:145 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-07-2004.03.pdiff [222 B]
Get:146 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-08-0800.00.pdiff [5,269 B]
Get:147 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-08-1959.50.pdiff [353 B]
Get:148 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-0159.52.pdiff [374 B]
Get:149 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-1359.56.pdiff [293 B]
Get:150 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-2000.45.pdiff [422 B]
Get:151 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-0159.55.pdiff [947 B]
Get:152 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-0759.42.pdiff [260 B]
Get:153 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-1359.42.pdiff [2,005 B]
Get:154 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-1959.58.pdiff [530 B]
Get:155 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-0159.46.pdiff [2,267 B]
Get:156 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-1400.04.pdiff [384 kB]
Get:157 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-1959.46.pdiff [116 kB]
Get:158 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-12-0159.45.pdiff [740 B]
Get:159 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-12-0801.37.pdiff [193 kB]
Get:160 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-13-1359.55.pdiff [497 B]
Get:161 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-14-1359.48.pdiff [32 B]
Get:162 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-14-2000.12.pdiff [163 B]
Get:163 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-15-0200.05.pdiff [68 B]
Get:164 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-16-1400.52.pdiff [10.4 kB]
Get:165 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-16-2000.50.pdiff [3,257 B]
Get:166 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-0159.56.pdiff [271 B]
Get:167 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-0759.56.pdiff [304 B]
Get:168 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-2000.05.pdiff [138 B]
Get:168 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-2000.05.pdiff [138 B]
Get:169 http://deb.debian.org/debian buster-backports/contrib armhf Packages 2021-02-11-1400.04.pdiff [558 B]
Get:169 http://deb.debian.org/debian buster-backports/contrib armhf Packages 2021-02-11-1400.04.pdiff [558 B]
Get:170 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-05-1405.08.pdiff [836 B]
Get:171 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-11-1400.04.pdiff [558 B]
Get:171 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-11-1400.04.pdiff [558 B]
Get:172 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-05-1405.08.pdiff [252 B]
Get:173 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-11-1400.04.pdiff [1,901 B]
Get:173 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-11-1400.04.pdiff [1,901 B]
Get:174 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb) 2021-02-11-1400.04.pdiff [1,927 B]
Get:174 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb) 2021-02-11-1400.04.pdiff [1,927 B]
Get:175 http://deb.debian.org/debian buster/main arm64 Packages [10.5 MB]
Get:176 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils armhf Packages [7,475 B]
Get:177 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils arm64 Packages [10.7 kB]
Get:178 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils arm64 Contents (deb) [47.0 kB]
Get:179 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils armhf Contents (deb) [8,999 B]
Get:180 https://mirrors.dotsrc.org/armbian-apt buster/buster-desktop arm64 Packages [26.5 kB]
Get:181 http://deb.debian.org/debian buster/main arm64 Contents (deb) [36.5 MB]
Get:182 http://deb.debian.org/debian buster/main armhf Contents (deb) [36.5 MB]
Get:183 http://deb.debian.org/debian buster/non-free arm64 Packages [64.3 kB]
Get:184 http://deb.debian.org/debian buster/non-free armhf Packages [74.5 kB]
Get:185 http://deb.debian.org/debian buster/non-free armhf Contents (deb) [779 kB]
Fetched 134 MB in 1min 19s (1,689 kB/s)

Reading package lists... Done
N: Repository 'http://deb.debian.org/debian buster InRelease' changed its 'Version' value from '10.7' to '10.8'
root@helios64:~#
root@helios64:~#
root@helios64:~# apt -y install tuned
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  gawk python3-configobj python3-decorator python3-pyudev python3-six
  virt-what
Suggested packages:
  gawk-doc python-configobj-doc
Recommended packages:
  linux-cpupower
The following NEW packages will be installed:
  gawk python3-configobj python3-decorator python3-pyudev python3-six tuned
  virt-what
0 upgraded, 7 newly installed, 0 to remove and 37 not upgraded.
Need to get 845 kB of archives.
After this operation, 3,465 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian buster/main arm64 gawk arm64 1:4.2.1+dfsg-1 [628 kB]
Get:2 http://deb.debian.org/debian buster/main arm64 python3-six all 1.12.0-1 [15.7 kB]
Get:3 http://deb.debian.org/debian buster/main arm64 python3-configobj all 5.0.6-3 [35.7 kB]
Get:4 http://deb.debian.org/debian buster/main arm64 python3-decorator all 4.3.0-1.1 [14.5 kB]
Get:5 http://deb.debian.org/debian buster/main arm64 python3-pyudev all 0.21.0-1 [40.2 kB]
Get:6 http://deb.debian.org/debian buster/main arm64 virt-what arm64 1.19-1 [15.5 kB]
Get:7 http://deb.debian.org/debian buster/main arm64 tuned all 2.10.0-1 [96.1 kB]
Fetched 845 kB in 2s (478 kB/s)
Selecting previously unselected package gawk.
(Reading database ... 39228 files and directories currently installed.)
Preparing to unpack .../0-gawk_1%3a4.2.1+dfsg-1_arm64.deb ...
Unpacking gawk (1:4.2.1+dfsg-1) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../1-python3-six_1.12.0-1_all.deb ...
Unpacking python3-six (1.12.0-1) ...
Selecting previously unselected package python3-configobj.
Preparing to unpack .../2-python3-configobj_5.0.6-3_all.deb ...
Unpacking python3-configobj (5.0.6-3) ...
Selecting previously unselected package python3-decorator.
Preparing to unpack .../3-python3-decorator_4.3.0-1.1_all.deb ...
Unpacking python3-decorator (4.3.0-1.1) ...
Selecting previously unselected package python3-pyudev.
Preparing to unpack .../4-python3-pyudev_0.21.0-1_all.deb ...
Unpacking python3-pyudev (0.21.0-1) ...
Selecting previously unselected package virt-what.
Preparing to unpack .../5-virt-what_1.19-1_arm64.deb ...
Unpacking virt-what (1.19-1) ...
Selecting previously unselected package tuned.
Preparing to unpack .../6-tuned_2.10.0-1_all.deb ...
Unpacking tuned (2.10.0-1) ...
Setting up virt-what (1.19-1) ...
Setting up gawk (1:4.2.1+dfsg-1) ...
Setting up python3-six (1.12.0-1) ...
Setting up python3-decorator (4.3.0-1.1) ...
Setting up python3-configobj (5.0.6-3) ...
Setting up python3-pyudev (0.21.0-1) ...
Setting up tuned (2.10.0-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/tuned.service → /lib/systemd/system/tuned.service.
Processing triggers for dbus (1.12.20-0+deb10u1) ...
Processing triggers for man-db (2.8.5-2) ...
root@helios64:~# tuned-adm profile server-powersave
root@helios64:~# systemctl restart tuned
root@helios64:~# cd /boot
root@helios64:/boot# ls
armbianEnv.txt                  dtb-5.10.12-rockchip64
armbian_first_run.txt.template  Image
boot.bmp                        initrd.img-5.10.12-rockchip64
boot.cmd                        System.map-5.10.12-rockchip64
boot.scr                        uInitrd
config-5.10.12-rockchip64       uInitrd-5.10.12-rockchip64
dtb                             vmlinuz-5.10.12-rockchip64
root@helios64:/boot# nano armbianEnv.txt
  GNU nano 3.2                     armbianEnv.txt

verbosity=7
bootlogo=false
console=serial
extraargs=earlyprintk ignore_loglevel
overlay_prefix=rockchip
rootdev=UUID=e4e3bcd6-3f03-4362-bbe0-f1654138c5d8
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

root@helios64:/boot# nano armbianEnv.txt
  GNU nano 3.2                     armbianEnv.txt

verbosity=7
bootlogo=false
console=serial
extraargs=earlyprintk ignore_loglevel fsck.repair=yes
overlay_prefix=rockchip
rootdev=UUID=e4e3bcd6-3f03-4362-bbe0-f1654138c5d8
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

root@helios64:/boot# ls
armbianEnv.txt                  dtb-5.10.12-rockchip64
armbian_first_run.txt.template  Image
boot.bmp                        initrd.img-5.10.12-rockchip64
boot.cmd                        System.map-5.10.12-rockchip64
boot.scr                        uInitrd
config-5.10.12-rockchip64       uInitrd-5.10.12-rockchip64
dtb                             vmlinuz-5.10.12-rockchip64
root@helios64:/boot# more boot.scr
'V▒▒A▒`▒
▒▒More--(0%)
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

setenv load_addr "0x9000000"
setenv overlay_error "false"
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv rootfstype "ext4"
setenv docker_optimizations "on"
setenv earlycon "off"

echo "Boot script loaded from ${devtype} ${devnum}"

if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
        load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
        env import -t ${load_addr} ${filesize}
fi

if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv cons
oleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv conso
leargs "console=ttyS2,1500000 ${consoleargs}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}";
 fi
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=boo
tsplash.armbian ${consoleargs}"; fi

# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs
} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=
${usbstoragequirks} ${extraargs} ${extraboardargs}"

if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgro
up_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image

load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-${overlay_file}.dtbo; then
                echo "Applying kernel provided DT overlay ${overlay_prefix}-${ov
erlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
for overlay_file in ${user_overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overla
y_file}.dtbo; then
                echo "Applying user provided DT overlay ${overlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
if test "${overlay_error}" = "true"; then
        echo "Error applying DT overlays, restoring original DT"
        load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-fixup.scr; then
                echo "Applying kernel provided DT fixup script (${overlay_prefix
}-fixup.scr)"
                source ${load_addr}
        fi
        if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
                load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
                echo "Applying user provided fixup script (fixup.scr)"
                source ${load_addr}
        fi
fi
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
root@helios64:/boot# mkimage -C none -A arm -T scrit -d /boot/boot.cmd /boot/boot.scr

Invalid image type, supported are:
        Unknown image type  Unknown image type
        aisimage         Davinci AIS image
        atmelimage       ATMEL ROM-Boot Image
        filesystem       Filesystem Image
        firmware         Firmware
        firmware_ivt     Firmware with HABv4 IVT
        flat_dt          Flat Device Tree
        fpga             FPGA Image
        gpimage          TI Keystone SPL Image
        imx8image        NXP i.MX8 Boot Image
        imx8mimage       NXP i.MX8M Boot Image
        imximage         Freescale i.MX Boot Image
        invalid          Invalid Image
        kernel           Kernel Image
        kernel_noload    Kernel Image (no loading done)
        kwbimage         Kirkwood Boot Image
        lpc32xximage     LPC32XX Boot Image
        mtk_image        MediaTek BootROM loadable Image
        multi            Multi-File Image
        mxsimage         Freescale MXS Boot Image
        omapimage        TI OMAP SPL With GP CH
        pblimage         Freescale PBL Boot Image
        pmmc             TI Power Management Micro-Controller Firmware
        ramdisk          RAMDisk Image
        rkimage          Rockchip Boot Image
        rksd             Rockchip SD Boot Image
        rkspi            Rockchip SPI Boot Image
        script           Script
        socfpgaimage     Altera SoCFPGA CV/AV preloader
        socfpgaimage_v1  Altera SoCFPGA A10 preloader
        standalone       Standalone Program
        stm32image       STMicroelectronics STM32 Image
        tee              Trusted Execution Environment Image
        ublimage         Davinci UBL image
        vybridimage      Vybrid Boot Image
        x86_setup        x86 setup.bin
        zynqimage        Xilinx Zynq Boot Image
        zynqmpbif        Xilinx ZynqMP Boot Image (bif)
        zynqmpimage      Xilinx ZynqMP Boot Image

Error: Invalid image type
Usage: mkimage -l image
          -l ==> list image header information
       mkimage [-x] -A arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...] image
          -A ==> set architecture to 'arch'
          -O ==> set operating system to 'os'
          -T ==> set image type to 'type'
          -C ==> set compression type 'comp'
          -a ==> set load address to 'addr' (hex)
          -e ==> set entry point to 'ep' (hex)
          -n ==> set image name to 'name'
          -d ==> use image data from 'datafile'
          -x ==> set XIP (execute in place)
       mkimage [-D dtc_options] [-f fit-image.its|-f auto|-F] [-b <dtb> [-b <dtb>]] [-i <ramdisk.cpio.gz>] fit-image
           <dtb> file is used with -f auto, it may occur multiple times.
          -D => set all options for device tree compiler
          -f => input filename for FIT source
          -i => input filename for ramdisk file
Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)
       mkimage -V ==> print version information and exit
Use '-T list' to see a list of available image types
root@helios64:/boot# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
Image Name:
Created:      Fri Feb 19 16:30:44 2021
Image Type:   ARM Linux Script (uncompressed)
Data Size:    3121 Bytes = 3.05 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 3113 Bytes = 3.04 KiB = 0.00 MiB
root@helios64:/boot# more boot.scr
'VQ>W4`/▒
▒▒More--(0%)
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

setenv load_addr "0x9000000"
setenv overlay_error "false"
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv rootfstype "ext4"
setenv docker_optimizations "on"
setenv earlycon "off"

echo "Boot script loaded from ${devtype} ${devnum}"

if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
        load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
        env import -t ${load_addr} ${filesize}
fi

if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv cons
oleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv conso
leargs "console=ttyS2,1500000 ${consoleargs}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}";
 fi
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=boo
tsplash.armbian ${consoleargs}"; fi

# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs
} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=
${usbstoragequirks} ${extraargs} ${extraboardargs}"

if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgro
up_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image

load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-${overlay_file}.dtbo; then
                echo "Applying kernel provided DT overlay ${overlay_prefix}-${ov
erlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
for overlay_file in ${user_overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overla
y_file}.dtbo; then
                echo "Applying user provided DT overlay ${overlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
if test "${overlay_error}" = "true"; then
        echo "Error applying DT overlays, restoring original DT"
        load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-fixup.scr; then
                echo "Applying kernel provided DT fixup script (${overlay_prefix
}-fixup.scr)"
                source ${load_addr}
        fi
        if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
                load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
                echo "Applying user provided fixup script (fixup.scr)"
                source ${load_addr}
        fi
fi
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
root@helios64:/boot# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
Image Name:
Created:      Fri Feb 19 16:31:00 2021
Image Type:   ARM Linux Script (uncompressed)
Data Size:    3121 Bytes = 3.05 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 3113 Bytes = 3.04 KiB = 0.00 MiB
root@helios64:/boot# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  armbian-config armbian-firmware armbian-zsh base-files bind9-host
  device-tree-compiler dnsutils file iproute2 libbind9-161 libdns-export1104
  libdns1104 libgnutls30 libirs161 libisc-export1100 libisc1100 libisccc161
  libisccfg163 liblwres161 libmagic-mgc libmagic1 libnss-myhostname
  libpam-systemd libssl-dev libssl1.1 libsystemd0 libudev1 libzstd1
  linux-buster-root-current-helios64 linux-dtb-current-rockchip64
  linux-image-current-rockchip64 openssl systemd systemd-sysv udev unzip
  wireguard-tools
37 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 66.4 MB of archives.
After this operation, 7,168 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:2 http://security.debian.org buster/updates/main arm64 libzstd1 arm64 1.3.8+dfsg-3+deb10u1 [216 kB]
Get:3 http://deb.debian.org/debian buster/main arm64 base-files arm64 10.3+deb10u8 [69.9 kB]
Get:9 http://deb.debian.org/debian buster/main arm64 libsystemd0 arm64 241-7~deb10u6 [314 kB]
Get:10 http://security.debian.org buster/updates/main arm64 libssl-dev arm64 1.1.1d-0+deb10u5 [1,686 kB]
Get:11 http://deb.debian.org/debian buster/main arm64 libnss-myhostname arm64 241-7~deb10u6 [122 kB]
Get:12 http://deb.debian.org/debian buster/main arm64 libpam-systemd arm64 241-7~deb10u6 [201 kB]
Get:6 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 linux-buster-root-current-helios64 arm64 21.02.2 [416 kB]
Get:13 http://deb.debian.org/debian buster/main arm64 systemd arm64 241-7~deb10u6 [3,258 kB]
Get:4 https://imola.armbian.com/apt buster/main arm64 armbian-firmware all 21.02.2 [6,922 kB]
Get:1 https://mirrors.netix.net/armbian/apt buster/main arm64 armbian-config all 21.02.2 [44.8 kB]
Get:5 https://mirrors.netix.net/armbian/apt buster/main arm64 armbian-zsh all 21.02.2 [1,700 kB]
Get:14 http://security.debian.org buster/updates/main arm64 libssl1.1 arm64 1.1.1d-0+deb10u5 [1,382 kB]
Get:15 http://deb.debian.org/debian buster/main arm64 udev arm64 241-7~deb10u6 [1,245 kB]
Get:16 http://security.debian.org buster/updates/main arm64 dnsutils arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [361 kB]
Get:17 http://security.debian.org buster/updates/main arm64 bind9-host arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [270 kB]
Get:18 http://security.debian.org buster/updates/main arm64 libbind9-161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [245 kB]
Get:19 http://deb.debian.org/debian buster/main arm64 libudev1 arm64 241-7~deb10u6 [146 kB]
Get:20 http://deb.debian.org/debian buster/main arm64 systemd-sysv arm64 241-7~deb10u6 [100 kB]
Get:8 https://mirrors.netix.net/armbian/apt buster/main arm64 linux-image-current-rockchip64 arm64 21.02.2 [39.9 MB]
Get:21 http://deb.debian.org/debian buster/main arm64 libgnutls30 arm64 3.6.7-4+deb10u6 [1,062 kB]
Get:22 http://security.debian.org buster/updates/main arm64 libisccfg163 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [265 kB]
Get:23 http://security.debian.org buster/updates/main arm64 libisccc161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [236 kB]
Get:24 http://security.debian.org buster/updates/main arm64 libirs161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [236 kB]
Get:25 http://security.debian.org buster/updates/main arm64 libdns1104 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [1,130 kB]
Get:26 http://deb.debian.org/debian buster/main arm64 iproute2 arm64 4.20.0-2+deb10u1 [805 kB]
Get:27 http://deb.debian.org/debian buster/main arm64 file arm64 1:5.35-4+deb10u2 [66.5 kB]
Get:28 http://deb.debian.org/debian buster/main arm64 libmagic1 arm64 1:5.35-4+deb10u2 [115 kB]
Get:29 http://security.debian.org buster/updates/main arm64 libisc1100 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [436 kB]
Get:30 http://deb.debian.org/debian buster/main arm64 libmagic-mgc arm64 1:5.35-4+deb10u2 [242 kB]
Get:31 http://security.debian.org buster/updates/main arm64 liblwres161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [249 kB]
Get:32 http://deb.debian.org/debian buster/main arm64 unzip arm64 6.0-23+deb10u2 [166 kB]
Get:33 http://security.debian.org buster/updates/main arm64 libisc-export1100 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [369 kB]
Get:34 http://deb.debian.org/debian buster/main arm64 device-tree-compiler arm64 1.4.7-4 [251 kB]
Get:35 http://deb.debian.org/debian buster-backports/main arm64 wireguard-tools arm64 1.0.20200827-1~bpo10+1 [90.5 kB]
Get:36 http://security.debian.org buster/updates/main arm64 libdns-export1104 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [901 kB]
Get:37 http://security.debian.org buster/updates/main arm64 openssl arm64 1.1.1d-0+deb10u5 [823 kB]
Get:7 https://imola.armbian.com/apt buster/main arm64 linux-dtb-current-rockchip64 arm64 21.02.2 [311 kB]
Fetched 66.4 MB in 40s (1,670 kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../base-files_10.3+deb10u8_arm64.deb ...
Unpacking base-files (10.3+deb10u8) over (10.3+deb10u7) ...
Setting up base-files (10.3+deb10u8) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../libsystemd0_241-7~deb10u6_arm64.deb ...
Unpacking libsystemd0:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Setting up libsystemd0:arm64 (241-7~deb10u6) ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../libnss-myhostname_241-7~deb10u6_arm64.deb ...
Unpacking libnss-myhostname:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Preparing to unpack .../libpam-systemd_241-7~deb10u6_arm64.deb ...
Unpacking libpam-systemd:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Preparing to unpack .../systemd_241-7~deb10u6_arm64.deb ...
Unpacking systemd (241-7~deb10u6) over (241-7~deb10u5) ...
[  608.261405] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  608.261904] Modules linked in: rfkill governor_performance snd_soc_hdmi_codec r8152 snd_soc_rockchip_i2s hantro_vpu(C) rockchip_vdec(C) rockchip_rga snd_soc_core rockchipdrm v4l2_h264 snd_pcm_dmaengine videobuf2_dma_contig snd_pcm dw_mipi_dsi v4l2_mem2mem videobuf2_dma_sg videobuf2_vmalloc dw_hdmi snd_timer videobuf2_memops analogix_dp videobuf2_v4l2 leds_pwm gpio_charger panfrost drm_kms_helper videobuf2_common pwm_fan snd cec gpu_sched fusb302 videodev soundcore rc_core tcpm sg drm typec mc drm_panel_orientation_quirks gpio_beeper cpufreq_dt zram ledtrig_netdev lm75 ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys
[  608.268027] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G         C        5.10.12-rockchip64 #21.02.1
[  608.268811] Hardware name: Helios64 (DT)
[  608.269166] pstate: 000003c5 (nzcv DAIF -PAN -UAO -TCO BTYPE=--)
[  608.269707] pc : do_undefinstr+0x2ec/0x318
[  608.270075] lr : do_undefinstr+0x1e4/0x318
[  608.270441] sp : ffff800011c13840
[  608.270738] x29: ffff800011c13840 x28: ffff000040311d00
[  608.271217] x27: ffff000040004300 x26: ffff800011cf3de0
[  608.271694] x25: 0000000000000001 x24: 0000000000000000
[  608.272172] x23: 00000000800003c5 x22: ffff800010e66f24
[  608.272649] x21: ffff800011c13a20 x20: ffff800011c138d0
[  608.273126] x19: ffff8000118b9948 x18: 0000000000000000
[  608.273603] x17: 0000000000000000 x16: 0000000000000000
[  608.274080] x15: 0000007325c21884 x14: 00000000000003b8
[  608.274557] x13: 0000000000000155 x12: 0000000000000001
[  608.275034] x11: 0000000000000040 x10: ffff80001194eea8
[  608.275511] x9 : ffff80001194eea0 x8 : ffff000040400270
[  608.275989] x7 : 0000000000000000 x6 : ffff800011c13898
[  608.276466] x5 : 00000000d5300000 x4 : ffff8000118c6270
[  608.276943] x3 : 0000000000010002 x2 : 0000000000010001
[  608.277421] x1 : ffff000040311d00 x0 : 00000000800003c5
[  608.277898] Call trace:
[  608.278123]  do_undefinstr+0x2ec/0x318
[  608.278464]  el1_undef+0x30/0x50
[  608.278757]  el1_sync_handler+0x88/0xe8
[  608.279103]  el1_sync+0x7c/0x100
[  608.279396]  enter_from_kernel_mode.isra.5+0x14/0x40
[  608.279839]  el1_undef+0x1c/0x50
[  608.280131]  el1_sync_handler+0x88/0xe8
[  608.280476]  el1_sync+0x7c/0x100
[  608.280770]  check_preemption_disabled+0x38/0x110
[  608.281190]  rcu_nmi_enter+0x28/0x150
[  608.281520]  rcu_irq_enter+0x10/0x70
[  608.281843]  enter_from_kernel_mode.isra.5+0x28/0x40
[  608.282285]  el1_abort+0x28/0x70
[  608.282577]  el1_sync_handler+0x64/0xe8
[  608.282922]  el1_sync+0x7c/0x100
[  608.283214]  enter_from_kernel_mode.isra.5+0x10/0x40
[  608.283657]  el1_undef+0x1c/0x50
[  608.283949]  el1_sync_handler+0x88/0xe8
[  608.284293]  el1_sync+0x7c/0x100
[  608.284588]  __radix_tree_lookup+0x68/0xb0
[  608.284958]  generic_handle_irq+0x1c/0x48
[  608.285318]  __handle_domain_irq+0x94/0x108
[  608.285697]  gic_handle_irq+0xc0/0x140
[  608.286033]  el1_irq+0xc0/0x180
[  608.286319]  arch_cpu_idle+0x18/0x28
[  608.286640]  default_idle_call+0x44/0x1bc
[  608.287002]  do_idle+0x204/0x278
[  608.287293]  cpu_startup_entry+0x24/0x60
[  608.287648]  secondary_start_kernel+0x170/0x180
[  608.288057] Code: f9401bf7 17ffff7d a9025bf5 f9001bf7 (d4210000)
[  608.288608] ---[ end trace cb8b19b43b3c01cd ]---
[  608.289021] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt
[  608.289678] SMP: stopping secondary CPUs
[  608.290036] Kernel Offset: disabled
[  608.290351] CPU features: 0x0240022,6100200c
[  608.290732] Memory Limit: none
[  608.291021] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---
DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80561
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5af4
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Feb 03 2021 - 22:43:46 +0100)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
235 bytes read in 4 ms (56.6 KiB/s)
13857311 bytes read in 597 ms (22.1 MiB/s)
28582400 bytes read in 1214 ms (22.5 MiB/s)
81843 bytes read in 14 ms (5.6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3de0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    13857247 Bytes = 13.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f51b8000, end f5eef1df ... OK
   Loading Device Tree to 00000000f513b000, end 00000000f51b7fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.12-rockchip64 (root@beast) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #21.02.1 SMP PREEMPT Wed Feb 3 20:55:02 CET 2021
[    0.000000] Machine model: Helios64
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 128 MiB at 0x00000000ed000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77d9100-0xf77dafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 4088 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261632 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 11776 pages used for memmap
[    0.000000]   DMA32 zone: 753664 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 32 pages/cpu s94040 r8192 d28840 u131072
[    0.000000] pcpu-alloc: s94040 r8192 d28840 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=e4e3bcd6-3f03-4362-bbe0-f1654138c5d8 rootwait rootfstype=ext4 console=ttyS2,1500000  consoleblank=0 loglevel=7 ubootpart=aaedb48e-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel fsck.repair=yes  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB)
[    0.000000] Memory: 3741216K/4061184K available (14848K kernel code, 2632K rwdata, 5968K rodata, 4352K init, 580K bss, 188896K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @40100000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000400d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000400e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x698/0x850 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001441] Console: colour dummy device 80x25
[    0.001588] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001612] pid_max: default: 32768 minimum: 301
[    0.001783] LSM: Security Framework initializing
[    0.001830] Yama: becoming mindful.
[    0.001979] AppArmor: AppArmor initialized
[    0.002086] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002123] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005830] rcu: Hierarchical SRCU implementation.
[    0.007020] Platform MSI: interrupt-controller@fee20000 domain created
[    0.007667] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.010035] EFI services will not be available.
[    0.010763] smp: Bringing up secondary CPUs ...
[    0.011941] Detected VIPT I-cache on CPU1
[    0.011993] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012012] GICv3: CPU1: using allocated LPI pending table @0x00000000400f0000
[    0.012091] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013512] Detected VIPT I-cache on CPU2
[    0.013562] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013581] GICv3: CPU2: using allocated LPI pending table @0x0000000040180000
[    0.013658] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.015101] Detected VIPT I-cache on CPU3
[    0.015150] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.015170] GICv3: CPU3: using allocated LPI pending table @0x0000000040190000
[    0.015246] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.016741] CPU features: detected: Spectre-v2
[    0.016748] CPU features: detected: Spectre-v4
[    0.016753] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.016762] Detected PIPT I-cache on CPU4
[    0.016799] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.016814] GICv3: CPU4: using allocated LPI pending table @0x00000000401a0000
[    0.016863] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.018107] Detected PIPT I-cache on CPU5
[    0.018147] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.018162] GICv3: CPU5: using allocated LPI pending table @0x00000000401b0000
[    0.018213] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.018395] smp: Brought up 1 node, 6 CPUs
[    0.018502] SMP: Total of 6 processors activated.
[    0.018517] CPU features: detected: 32-bit EL0 Support
[    0.018531] CPU features: detected: CRC32 instructions
[    0.018545] CPU features: detected: 32-bit EL1 Support
[    0.045280] CPU: All CPU(s) started at EL2
[    0.045362] alternatives: patching kernel code
[    0.049159] devtmpfs: initialized
[    0.068121] Registered cp15_barrier emulation handler
[    0.068150] Registered setend emulation handler
[    0.068382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.068459] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.071466] pinctrl core: initialized pinctrl subsystem
[
  [    2.843453] hub 3-0:1.0: USB hub found
[    2.843827] hub 3-0:1.0: 1 port detected
[    2.844527] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.845031] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    2.845714] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    2.846365] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.847237] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.847967] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.848603] usb usb4: Product: xHCI Host Controller
[    2.849037] usb usb4: Manufacturer: Linux 5.10.12-rockchip64 xhci-hcd
[    2.849606] usb usb4: SerialNumber: xhci-hcd.0.auto
[    2.850568] hub 4-0:1.0: USB hub found
[    2.850978] hub 4-0:1.0: 1 port detected
[    2.851837] usbcore: registered new interface driver usb-storage
[    2.855033] mousedev: PS/2 mouse device common for all mice
[    2.856948] i2c /dev entries driver
[    2.861315] pca953x 2-0020: using no AI
[    2.871771] rk808 0-001b: chip id: 0x0
[    2.876004] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.876577] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    2.878234] vdd_center: supplied by vcc5v0_sys
[    2.879335] vdd_cpu_l: supplied by vcc5v0_sys
[    2.880089] vcc_ddr_s3: supplied by vcc5v0_sys
[    2.881155] vcc1v8_sys_s3: supplied by vcc5v0_sys
[    2.882232] vcc1v8_dvp: supplied by vcc5v0_sys
[    2.883151] vcc3v0_touch: supplied by vcc5v0_sys
[    2.884894] vcc1v8_s3: supplied by vcc5v0_sys
[    2.885564] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
[    2.887272] vcc_sdio_s0: supplied by vcc5v0_sys
[    2.888206] vcca3v0_codec: supplied by vcc5v0_sys
[    2.889816] vcc1v5_s3: supplied by vcc5v0_sys
[    2.890722] vcca1v8_codec: supplied by vcc5v0_sys
[    2.892462] vcc3v0_s3: supplied by vcc5v0_sys
[    2.893010] vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER
[    2.893639] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3
[    2.894629] vcc3v3_s0: supplied by vcc3v3_sys_s3
[    2.898814] rk808-rtc rk808-rtc: registered as rtc0
[    2.899836] rk808-rtc rk808-rtc: setting system clock to 2021-02-19T16:36:53 UTC (1613752613)
[    2.903743] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    2.905607] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3
[    2.906145] avdd_0v9_s0: supplied by vcc1v8_sys_s3
[    2.906672] vdd_cpu_b: supplied by vcc5v0_sys
[    2.910154] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    2.912043] vdd_gpu: supplied by vcc5v0_sys
[    2.920082] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    2.922456] sdhci: Secure Digital Host Controller Interface driver
[    2.923099] sdhci: Copyright(c) Pierre Ossman
[    2.923518] Synopsys Designware Multimedia Card Interface Driver
[    2.925366] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.926230] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    2.926940] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    2.927537] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    2.928129] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo
[    2.928979] mmc2: CQHCI version 5.10
[    2.929805] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    2.930675] ledtrig-cpu: registered to indicate activity on CPUs
[    2.932489] hid: raw HID events driver (C) Jiri Kosina
[    2.933082] usbcore: registered new interface driver usbhid
[    2.933576] usbhid: USB HID core driver
[    2.939686] drop_monitor: Initializing network drop monitor service
[    2.941055] NET: Registered protocol family 10
[    2.943492] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.955081] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADM
  [    3.099436] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    3.100102] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    3.100857] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    3.160280] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[    3.160874] pci_bus 0000:00: root bus resource [bus 00-1f]
[    3.161363] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[    3.161973] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[    3.162861] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[    3.163599] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    3.164544] pci 0000:00:00.0: supports D1
[    3.164981] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    3.167616] dwmmc_rockchip fe320000.mmc: All phases bad!
[    3.168094] mmc1: tuning execution failed: -5
[    3.172571] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.173527] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
[    3.174121] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    3.174746] pci 0000:01:00.0: reg 0x10: [io  size 0x0080]
[    3.175270] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[    3.175893] pci 0000:01:00.0: reg 0x14: [io  size 0x0080]
[    3.176400] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    3.177021] pci 0000:01:00.0: reg 0x18: [io  size 0x0080]
[    3.177527] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[    3.178149] pci 0000:01:00.0: reg 0x1c: [io  size 0x0080]
[    3.178655] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    3.179331] pci 0000:01:00.0: reg 0x20: [io  size 0x0080]
[    3.179840] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
[    3.180422] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    3.181065] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
[    3.182036] pci 0000:01:00.0: PME# supported from D3hot
[    3.182790] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    3.182915] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.189438] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[    3.190047] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[    3.190662] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
[    3.191316] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
[    3.191929] pci 0000:01:00.0: BAR 0: no space for [io  size 0x0080]
[    3.192484] pci 0000:01:00.0: BAR 0: failed to assign [io  size 0x0080]
[    3.193068] pci 0000:01:00.0: BAR 1: no space for [io  size 0x0080]
[    3.193623] pci 0000:01:00.0: BAR 1: failed to assign [io  size 0x0080]
[    3.194206] pci 0000:01:00.0: BAR 2: no space for [io  size 0x0080]
[    3.194760] pci 0000:01:00.0: BAR 2: failed to assign [io  size 0x0080]
[    3.195433] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.196307] pci 0000:01:00.0: BAR 3: no space for [io  size 0x0080]
[    3.196860] pci 0000:01:00.0: BAR 3: failed to assign [io  size 0x0080]
[    3.197444] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0080]
[    3.197998] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0080]
[    3.198586] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.199047] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[    3.199886] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    3.200772] pcieport 0000:00:00.0: PME: Signaling with IRQ 90
[    3.201620] pcieport 0000:00:00.0: AER: enabled with IRQ 90
[    3.202444] ahci 0000:01:00.0: version 3.0
[    3.202829] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[    3.203932] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.204610] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
[    3.205334] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
[    3.209889] scsi host0: ahci
[    3.210974] scsi host1: ahci
[    3.211951] scsi host2: ahci
[    3.212902] scsi host3: ahci
[    3.213801] scsi host4: ahci
[    3.214287] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 91
[    3.214967] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 92
[    3.215622] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 93
[    3.216275] ata4: SATA max UDMA/133
                                       [    3.485411] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.603611] usb 4-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04
[    3.604336] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.604967] usb 4-1: Product: USB3.0 Hub
[    3.605415] usb 4-1: Manufacturer: VIA Labs, Inc.
[    3.630678] hub 4-1:1.0: USB hub found
[    3.631259] hub 4-1:1.0: 4 ports detected
[    4.278993] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.299983] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[    4.300722] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    4.301366] usb 4-1.4: Product: USB 10/100/1G/2.5G LAN
[    4.301823] usb 4-1.4: Manufacturer: Realtek
[    4.302204] usb 4-1.4: SerialNumber: 000000001
[   13.166948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.241353] ata1.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   13.241960] ata1.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   13.252813] ata1.00: configured for UDMA/133
[   13.253810] scsi 0:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   13.256008] sd 0:0:0:0: [sda] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   13.256711] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   13.257251] sd 0:0:0:0: [sda] Write Protect is off
[   13.257689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.258269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.315020]  sda: sda1 sda9
[   13.318311] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.326920] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   17.400162] ata2.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   17.400779] ata2.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   17.411604] ata2.00: configured for UDMA/133
[   17.412536] scsi 1:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   17.414551] sd 1:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   17.415301] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   17.415835] sd 1:0:0:0: [sdb] Write Protect is off
[   17.416273] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   17.416837] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.471573]  sdb: sdb1 sdb9
[   17.474864] sd 1:0:0:0: [sdb] Attached SCSI disk
[   18.010916] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.022704] ata3.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   18.023329] ata3.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.034052] ata3.00: configured for UDMA/133
[   18.035136] scsi 2:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   18.037252] sd 2:0:0:0: [sdc] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   18.037956] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   18.038488] sd 2:0:0:0: [sdc] Write Protect is off
[   18.038954] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   18.039521] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.097888]  sdc: sdc1 sdc9
[   18.101269] sd 2:0:0:0: [sdc] Attached SCSI disk
[   18.630939] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.653175] ata4.00: ATA-11: WDC  WUH721818ALE6L4, PCGNW120, max UDMA/133
[   18.653782] ata4.00: 35156656128 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.664486] ata4.00: configured for UDMA/133
[   18.665274] scsi 3:0:0:0: Direct-Access     ATA      WDC  WUH721818AL W120 PQ: 0 ANSI: 5
[   18.667208] sd 3:0:0:0: [sdd] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[   18.667911] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   18.668443] sd 3:0:0:0: [sdd] Write Protect is off
[   18.668880] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   18.669444] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.727505]  sdd: sdd1 sdd9
[   18.730837] sd 3:0:0:0: [sdd] Attached SCSI disk
[   18.981538] ata5: SATA link down (SStatus 0 SControl 300)
[   18.984939] Freeing unused kernel memory: 4352K
[   18.985519] Run /init as init process
[   18.985850]   with arguments:
[   18.986118]     /init
[   18.986327]     earlyprintk
[   18.986580]   with environment:
[   18.986863]     HOME=/
[   18.987105]     TERM=linux
[   18.987350]     ubootpart=aaedb48e-01
[   18.987678]     cgroup_enable=memory
[   18.987998]     cgroup_memory=1
Loading, please wait...
Starting version 241
[   19.625711] input: adc-keys as /devices/platform/adc-keys/input/input1
[   19.723699] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   19.724296] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   19.725000] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   19.725789] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   19.726420] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   19.726949] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[   19.727462] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   19.728085] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   19.728700] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   19.734258] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   19.736262] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   19.736926] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[   19.737402] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   19.738066] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   19.738728] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   19.739242] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   19.739874] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   19.740633] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   19.741463] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   19.741987] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   19.904242] libphy: stmmac: probed
[   19.904593] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   19.905704] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Begin: Loading essential drivers ... [   20.133666] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[   20.415030] random: crng init done
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -y -C0 /dev/mmcblk1p1
e2fsck 1.44.5 (15-Dec-2018)
/dev/mmcblk1p1: recovering journal
Clearing orphaned inode 8812 (uid=0, gid=0, mode=0100644, size=278984)
Clearing orphaned inode 6804 (uid=0, gid=0, mode=0100644, size=75800)
Clearing orphaned inode 6863 (uid=0, gid=0, mode=0100644, size=639624)
Clearing orphaned inode 44201 (uid=0, gid=0, mode=0100644, size=421690)
Clearing orphaned inode 9812 (uid=0, gid=0, mode=0100644, size=3031632)
Setting free inodes count to 1835064 (was 1835828)
Setting free blocks count to 7186984 (was 7217325)
/dev/mmcblk1p1: clean, 45384/1880448 files, 522744/7709728 blocks
done.
[   21.667188] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... /scripts/local-bottom/mdadm: 2: /scripts/local-bottom/mdadm: rm: not found
done.
Begin: Running /scripts/init-bottom ... done.
[   22.665872] systemd[1]: Inserted module 'autofs4'
[   22.743601] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   22.746941] systemd[1]: Detected architecture arm64.

Welcome to Debian GNU/Linux 10 (buster)!

[   22.788002] systemd[1]: Set hostname to <helios64>.
[   23.298166] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[   23.387324] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[   23.399307] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[   23.411050] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[   23.412251] systemd[1]: Reached target Local Encrypted Volumes.
[  OK  ] Reached target Local Encrypted Volumes.
[   23.423776] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[   23.435025] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on Journal Socket.
         Starting Create list of re…odes for the current kernel...
         Mounting POSIX Message Queue File System...
         Starting Remount Root and Kernel File Systems...
         Mounting Kernel Debug File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[   23.593587] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
         Starting Load Kernel Modules...
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Starting Set the console keyboard layout...
         Starting Nameserver information manager...
[  OK  ] Listening on Syslog Socket.
[   23.664580] lm75 2-004c: supply vs not found, using dummy regulator
[   23.665885] lm75 2-004c: hwmon2: sensor 'lm75'
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
         Mounting Huge Pages File System...
[  OK  ] Reached target Paths.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Mounted Huge Pages File System.
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
         Mounting FUSE Control File System...
         Starting Create System Users...
         Starting Load/Save Random Seed...
[  OK  ] Started Nameserver information manager.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /tmp.
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Armbian ZRAM config...
[  OK  ] Started Set console font and keymap.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started udev Coldplug all Devices.
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Started Helper to synchronize boot up for ifupdown.
         Starting Raise network interfaces...
[   24.675339] zram: Added device: zram0
[   24.676673] zram: Added device: zram1
[   24.677991] zram: Added device: zram2
[   24.772021] input: beeper as /devices/platform/beeper/input/input2
[  OK  ] Found device /dev/ttyS2.
[   24.874214] mc: Linux media interface: v0.10
[   24.927945] videodev: Linux video capture interface: v2.00
[   24.979410] zram0: detected capacity change from 0 to 1991770112
[   24.981951] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.982688] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   24.983416] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   24.984082] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   25.005308] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[   25.011029] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[   25.013167] rockchip-vop ff900000.vop: Adding to iommu group 3
[   25.016966] panfrost ff9a0000.gpu: clock rate = 500000000
[   25.018155] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[   25.023227] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   25.024151] [drm] unsupported AFBC format[3231564e]
[   25.032181] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   25.032698] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5
[   25.033504] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000010002010010
[   25.034114] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   25.034364] xhci-hcd xhci-hcd.3.auto: irq 75, io mem 0xfe800000
[   25.035636] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   25.036361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   25.036990] usb usb5: Product: xHCI Host Controller
[   25.037417] usb usb5: Manufacturer: Linux 5.10.12-rockchip64 xhci-hcd
[   25.037979] usb usb5: SerialNumber: xhci-hcd.3.auto
[   25.038736] hub 5-0:1.0: USB hub found
[   25.039126] hub 5-0:1.0: 1 port detected
[   25.039655] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   25.040149] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 6
[   25.040826] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[   25.041433] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   25.042416] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   25.043143] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   25.043773] usb usb6: Product: xHCI Host Controller
[   25.044200] usb usb6: Manufacturer: Linux 5.10.12-rockchip64 xhci-hcd
[   25.044763] usb usb6: SerialNumber: xhci-hcd.3.auto
[   25.045392] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   25.046355] hub 6-0:1.0: USB hub found
[   25.046701] hub 6-0:1.0: 1 port detected
[   25.048200] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[   25.056487] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   25.057660] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   25.058935] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   25.060618] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[   25.065379] rockchip-rga ff680000.rga: HW Version: 0x03.02
[   25.066754] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   25.069888] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   25.072076] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[   25.077909] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[   25.119026] Adding 1945084k swap on /dev/zram0.  Priority:5 extents:1 across:1945084k SSFS
[   25.134837] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[   25.153702] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[   25.160687] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[   25.163219] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video1
[   25.164990] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video2
[   25.175452] rkvdec ff660000.video-codec: Adding to iommu group 1
[  OK  ] Started Raise network interfaces.
[   25.285824] zram1: detected capacity change from 0 to 52428800
[   25.346696] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   25.406998] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[  OK  ] Started Armbian ZRAM config.
[   25.543627] r8152 4-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256
[   25.559204] r8152 4-1.4:1.0 eth1: v2.14.0 (2020/09/24)
[   25.559689] r8152 4-1.4:1.0 eth1: This product is covered by one or more of the following patents:
[   25.559689]          US6,570,884, US6,115,776, and US6,327,625.
[   25.559689]
[   25.561365] usbcore: registered new interface driver r8152
[   25.592939] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
         Starting Armbian memory supported logging...
[   25.867075] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[   25.867762] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[   26.079031] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[   26.489072] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   28.015007] systemd[1]: Started Armbian memory supported logging.
[  OK  ] Started Armbian memory supported logging.
[   28.032134] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[   28.205216] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   28.269979] systemd-journald[719]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[   28.289757] Unable to handle kernel paging request at virtual address ffff800011c14110
[   28.290455] Mem abort info:
[   28.290704]   ESR = 0x96000047
[   28.290978]   EC = 0x25: DABT (current EL), IL = 32 bits
[   28.291445]   SET = 0, FnV = 0
[   28.291717]   EA = 0, S1PTW = 0
[   28.291995] Data abort info:
[   28.292252]   ISV = 0, ISS = 0x00000047
[   28.292592]   CM = 0, WnR = 1
[   28.292857] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000003668000
[   28.293445] [ffff800011c14110] pgd=00000000f7fff003, p4d=00000000f7fff003, pud=00000000f7ffe003, pmd=00000000400a8003, pte=0000000000000000
[   28.294555] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[   28.295047] Modules linked in: r8152 snd_soc_hdmi_codec snd_soc_rockchip_i2s rockchip_vdec(C) hantro_vpu(C) snd_soc_core leds_pwm v4l2_h264 snd_pcm_dmaengine videobuf2_dma_contig rockchip_rga snd_pcm v4l2_mem2mem snd_timer videobuf2_vmalloc gpio_charger videobuf2_dma_sg snd pwm_fan videobuf2_memops panfrost videobuf2_v4l2 rockchipdrm fusb302 soundcore sg videobuf2_common tcpm gpu_sched dw_mipi_dsi typec videodev dw_hdmi mc analogix_dp drm_kms_helper cec rc_core gpio_beeper drm cpufreq_dt drm_panel_orientation_quirks zram ledtrig_netdev lm75 ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys
[   28.300901] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G         C        5.10.12-rockchip64 #21.02.1
[   28.301675] Hardware name: Helios64 (DT)
[   28.302025] pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--)
[   28.302566] pc : update_load_avg+0x4a0/0x590
[   28.302946] lr : enqueue_entity+0x68/0x2a8
[   28.303308] sp : ffff800011c13d00
[   28.303601] x29: ffff800011c13d00 x28: ffff000040311d00
[   28.304076] x27: ffff000040004300 x26: ffff800011cf3de0
[   28.304549] x25: 0000000000000001 x24: ffff000040b03ac0
[   28.305022] x23: ffff0000f77c7d00 x22: 0000000000000005
[   28.305495] x21: 0000000695e813be x20: ffff000040b03ac0
[   28.305968] x19: ffff0000f77c7d80 x18: 0000000000000000
[   28.306440] x17: 0000000000000000 x16: 0000000000000000
[   28.306913] x15: 0000000000000000 x14: 000000000000019e
[   28.307386] x13: 0000000000000006 x12: 0000000000000001
[   28.307859] x11: 0000000000000040 x10: ffff80001194eea8
[   28.308331] x9 : ffff80001194eea0 x8 : ffff000040400270
[   28.308804] x7 : 0000000000000000 x6 : 000000001b6d6fce
[   28.309277] x5 : 00ffffffffffffff x4 : 0000000098240015
[   28.309751] x3 : 0000000000000000 x2 : 0000000000000005
[   28.310223] x1 : 0000000000000000 x0 : 0000000695e69800
[   28.310696] Call trace:
[   28.310918]  update_load_avg+0x4a0/0x590
[   28.311268]  enqueue_entity+0x68/0x2a8
[   28.311602]  enqueue_task_fair+0x8c/0x4b8
[   28.311960]  ttwu_do_activate+0x88/0x150
[   28.312309]  sched_ttwu_pending+0xbc/0x160
[   28.312676]  flush_smp_call_function_queue+0x114/0x250
[   28.313131]  generic_smp_call_function_single_interrupt+0x14/0x20
[   28.313670]  ipi_handler+0x7c/0x370
[   28.313984]  handle_percpu_devid_fasteoi_ipi+0x9c/0x1f0
[   28.314446]  generic_handle_irq+0x30/0x48
[   28.314802]  __handle_domain_irq+0x94/0x108
[   28.315176]  gic_handle_irq+0xc0/0x140
[   28.315510]  el1_irq+0xc0/0x180
[   28.315794]  arch_cpu_idle+0x18/0x28
[   28.316112]  default_idle_call+0x44/0x1bc
[   28.316468]  do_idle+0x204/0x278
[   28.316756]  cpu_startup_entry+0x24/0x60
[   28.317107]  secondary_start_kernel+0x170/0x180
[   28.317512] Code: 17ffff56 d2800004 52800002 17ffff42 (aa1403e2)
[   28.318058] ---[ end trace 6d00b0a42bf90e7c ]---
[   28.318467] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[   28.319073] SMP: stopping secondary CPUs
[   28.319428] Kernel Offset: disabled
[   28.319740] CPU features: 0x0240022,6100200c
[   28.320116] Memory Limit: none
[   28.320401] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

 

[Kernel panic in 5.10.12-rockchip64 21.02.1]

Thought I'd download the latest image in the hope that it might be more stable ... kernel panic on reboot, booted second time and then whlst trying to update kernel panic again. This board seems to be so unstable it's bascially unuseable

 

Quote

|_| |_|\___|_|_|\___/|___/\___/   |_|

Welcome to Armbian 21.02.1 Buster with Linux 5.10.12-rockchip64

No end-user support: work in progress

System load:   24%              Up time:       1 min
Memory usage:  4% of 3.71G      IP:            195.198.8.121
CPU temp:      54°C             Usage of /:    6% of 29G

[ General system configuration (beta): armbian-config ]

helios@helios64:~$ apt-get update
Reading package lists... Done
E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied)
E: Unable to lock directory /var/lib/apt/lists/
W: Problem unlinking the file /var/cache/apt/pkgcache.bin - RemoveCaches (13: Permission denied)
W: Problem unlinking the file /var/cache/apt/srcpkgcache.bin - RemoveCaches (13: Permission denied)
helios@helios64:~$ exit
logout

Armbian 21.02.1 Buster ttyS2

helios64 login: root
Password:
Last login: Fri Feb 19 16:23:53 GMT 2021 on ttyS2
 _   _      _ _            __   _  _
| | | | ___| (_) ___  ___ / /_ | || |
| |_| |/ _ \ | |/ _ \/ __| '_ \| || |_
|  _  |  __/ | | (_) \__ \ (_) |__   _|
|_| |_|\___|_|_|\___/|___/\___/   |_|

Welcome to Armbian 21.02.1 Buster with Linux 5.10.12-rockchip64

No end-user support: work in progress

System load:   18%              Up time:       2 min
Memory usage:  4% of 3.71G      IP:            195.198.8.121
CPU temp:      52°C             Usage of /:    6% of 29G

root@helios64:~# apt-get update
Get:1 http://security.debian.org buster/updates InRelease [65.4 kB]
Get:2 http://deb.debian.org/debian buster InRelease [122 kB]
Get:4 http://deb.debian.org/debian buster-updates InRelease [51.9 kB]
Get:5 http://deb.debian.org/debian buster-backports InRelease [46.7 kB]
Get:6 http://security.debian.org buster/updates/main arm64 Packages [329 kB]
Get:7 http://security.debian.org buster/updates/main armhf Packages [328 kB]
Get:8 http://deb.debian.org/debian buster/main armhf Packages [10.5 MB]
Get:3 https://mirrors.dotsrc.org/armbian-apt buster InRelease [18.3 kB]
Get:9 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 Packages [928 kB]
Get:10 https://mirrors.dotsrc.org/armbian-apt buster/main armhf Packages [778 kB]
Get:11 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 Contents (deb) [13.4 MB]
Get:12 https://mirrors.dotsrc.org/armbian-apt buster/main armhf Contents (deb) [20.7 MB]
Get:13 http://deb.debian.org/debian buster-updates/main armhf Packages.diff/Index [5,656 B]
Get:14 http://deb.debian.org/debian buster-updates/main arm64 Packages.diff/Index [5,656 B]
Get:15 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb).diff/Index [5,164 B]
Get:16 http://deb.debian.org/debian buster-updates/main armhf Contents (deb).diff/Index [5,164 B]
Get:17 http://deb.debian.org/debian buster-backports/main armhf Packages.diff/Index [27.8 kB]
Get:18 http://deb.debian.org/debian buster-backports/main arm64 Packages.diff/Index [27.8 kB]
Get:19 http://deb.debian.org/debian buster-backports/main armhf Contents (deb).diff/Index [27.9 kB]
Get:20 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb).diff/Index [27.9 kB]
Get:21 http://deb.debian.org/debian buster-backports/contrib armhf Packages.diff/Index [24.8 kB]
Get:22 http://deb.debian.org/debian buster-backports/contrib arm64 Packages.diff/Index [24.8 kB]
Get:23 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb).diff/Index [20.9 kB]
Get:24 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb).diff/Index [19.4 kB]
Get:25 http://deb.debian.org/debian buster-updates/main armhf Packages 2021-02-07-1359.56.pdiff [2,328 B]
Get:26 http://deb.debian.org/debian buster-updates/main arm64 Packages 2021-02-07-1359.56.pdiff [2,291 B]
Get:27 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb) 2021-02-07-1359.56.pdiff [11.8 kB]
Get:28 http://deb.debian.org/debian buster-updates/main armhf Contents (deb) 2021-02-07-1359.56.pdiff [11.9 kB]
Get:25 http://deb.debian.org/debian buster-updates/main armhf Packages 2021-02-07-1359.56.pdiff [2,328 B]
Get:29 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-04-1402.43.pdiff [476 B]
Get:27 http://deb.debian.org/debian buster-updates/main arm64 Contents (deb) 2021-02-07-1359.56.pdiff [11.8 kB]
Get:26 http://deb.debian.org/debian buster-updates/main arm64 Packages 2021-02-07-1359.56.pdiff [2,291 B]
Get:30 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-04-2001.58.pdiff [594 B]
Get:28 http://deb.debian.org/debian buster-updates/main armhf Contents (deb) 2021-02-07-1359.56.pdiff [11.9 kB]
Get:31 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-0200.10.pdiff [1,741 B]
Get:32 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-0800.01.pdiff [1,040 B]
Get:33 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-1405.08.pdiff [473 B]
Get:34 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-05-2000.51.pdiff [687 B]
Get:35 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-06-1404.54.pdiff [204 B]
Get:36 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-06-1959.41.pdiff [191 B]
Get:37 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-0159.49.pdiff [803 B]
Get:38 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-0759.53.pdiff [256 B]
Get:39 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-1359.56.pdiff [180 B]
Get:40 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-07-2004.03.pdiff [1,066 B]
Get:41 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-0201.53.pdiff [187 B]
Get:42 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-0800.00.pdiff [274 B]
Get:43 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-1400.04.pdiff [299 B]
Get:44 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-08-1959.50.pdiff [711 B]
Get:45 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-0159.52.pdiff [327 B]
Get:46 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-1359.56.pdiff [1,260 B]
Get:47 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-09-2000.45.pdiff [2,100 B]
Get:48 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-0159.55.pdiff [1,118 B]
Get:49 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-0759.42.pdiff [597 B]
Get:50 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-1359.42.pdiff [824 B]
Get:51 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-10-1959.58.pdiff [2,225 B]
Get:52 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-0159.46.pdiff [2,278 B]
Get:53 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-0759.49.pdiff [294 B]
Get:54 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-1400.04.pdiff [6,439 B]
Get:55 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-11-1959.46.pdiff [13.1 kB]
Get:56 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-12-0159.45.pdiff [1,800 B]
Get:57 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-12-0801.37.pdiff [188 B]
Get:58 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-13-0159.59.pdiff [4,182 B]
Get:59 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-13-1359.55.pdiff [932 B]
Get:60 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-14-1359.48.pdiff [206 B]
Get:61 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-14-2000.12.pdiff [199 B]
Get:62 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-15-0200.05.pdiff [191 B]
Get:63 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-16-1400.52.pdiff [2,043 B]
Get:64 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-16-2000.50.pdiff [2,562 B]
Get:65 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-0159.56.pdiff [2,647 B]
Get:66 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-0759.56.pdiff [1,412 B]
Get:67 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-2000.05.pdiff [786 B]
Get:67 http://deb.debian.org/debian buster-backports/main armhf Packages 2021-02-17-2000.05.pdiff [786 B]
Get:68 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-04-1402.43.pdiff [476 B]
Get:69 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-04-2001.58.pdiff [595 B]
Get:70 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-0200.10.pdiff [1,745 B]
Get:71 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-0800.01.pdiff [1,040 B]
Get:72 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-1405.08.pdiff [472 B]
Get:73 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-05-2000.51.pdiff [690 B]
Get:74 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-06-1404.54.pdiff [205 B]
Get:75 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-06-1959.41.pdiff [190 B]
Get:76 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-0159.49.pdiff [799 B]
Get:77 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-0759.53.pdiff [256 B]
Get:78 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-1359.56.pdiff [196 B]
Get:79 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-07-2004.03.pdiff [1,069 B]
Get:80 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-0201.53.pdiff [189 B]
Get:81 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-0800.00.pdiff [275 B]
Get:82 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-1400.04.pdiff [408 B]
Get:83 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-08-1959.50.pdiff [715 B]
Get:84 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-0159.52.pdiff [331 B]
Get:85 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-1359.56.pdiff [1,262 B]
Get:86 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-09-2000.45.pdiff [2,143 B]
Get:87 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-0159.55.pdiff [1,121 B]
Get:88 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-0759.42.pdiff [597 B]
Get:89 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-1359.42.pdiff [823 B]
Get:90 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-10-1959.58.pdiff [2,090 B]
Get:91 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-0159.46.pdiff [2,518 B]
Get:92 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-0759.49.pdiff [295 B]
Get:93 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-1400.04.pdiff [6,600 B]
Get:94 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-11-1959.46.pdiff [14.1 kB]
Get:95 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-12-0159.45.pdiff [910 B]
Get:96 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-12-0801.37.pdiff [188 B]
Get:97 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-13-1359.55.pdiff [928 B]
Get:98 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-14-1359.48.pdiff [206 B]
Get:99 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-14-2000.12.pdiff [203 B]
Get:100 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-15-0200.05.pdiff [193 B]
Get:101 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-16-1400.52.pdiff [2,044 B]
Get:102 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-16-2000.50.pdiff [2,557 B]
Get:103 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-0159.56.pdiff [2,613 B]
Get:104 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-0759.56.pdiff [1,416 B]
Get:105 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-2000.05.pdiff [785 B]
Get:105 http://deb.debian.org/debian buster-backports/main arm64 Packages 2021-02-17-2000.05.pdiff [785 B]
Get:106 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-04-1402.43.pdiff [208 B]
Get:107 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-0200.10.pdiff [289 B]
Get:108 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-0800.01.pdiff [546 B]
Get:109 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-1405.08.pdiff [197 B]
Get:110 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-05-2000.51.pdiff [88 B]
Get:111 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-06-1404.54.pdiff [8,655 B]
Get:112 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-07-0759.53.pdiff [520 B]
Get:113 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-07-2004.03.pdiff [221 B]
Get:114 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-08-0800.00.pdiff [5,192 B]
Get:115 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-08-1959.50.pdiff [353 B]
Get:116 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-0159.52.pdiff [373 B]
Get:117 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-1359.56.pdiff [292 B]
Get:118 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-09-2000.45.pdiff [424 B]
Get:119 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-0159.55.pdiff [948 B]
Get:120 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-0759.42.pdiff [262 B]
Get:121 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-1359.42.pdiff [1,933 B]
Get:122 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-10-1959.58.pdiff [525 B]
Get:123 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-0159.46.pdiff [2,215 B]
Get:124 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-1400.04.pdiff [384 kB]
Get:125 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-11-1959.46.pdiff [113 kB]
Get:126 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-12-0159.45.pdiff [4,533 B]
Get:127 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-12-0801.37.pdiff [193 kB]
Get:128 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-13-0159.59.pdiff [271 kB]
Get:129 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-13-1359.55.pdiff [501 B]
Get:130 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-14-1359.48.pdiff [32 B]
Get:131 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-14-2000.12.pdiff [166 B]
Get:132 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-15-0200.05.pdiff [68 B]
Get:133 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-16-1400.52.pdiff [10.4 kB]
Get:134 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-16-2000.50.pdiff [3,168 B]
Get:135 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-0159.56.pdiff [270 B]
Get:136 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-0759.56.pdiff [305 B]
Get:137 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-2000.05.pdiff [139 B]
Get:137 http://deb.debian.org/debian buster-backports/main armhf Contents (deb) 2021-02-17-2000.05.pdiff [139 B]
Get:138 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-04-1402.43.pdiff [207 B]
Get:139 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-0200.10.pdiff [291 B]
Get:140 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-0800.01.pdiff [548 B]
Get:141 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-1405.08.pdiff [195 B]
Get:142 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-05-2000.51.pdiff [86 B]
Get:143 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-06-1404.54.pdiff [8,638 B]
Get:144 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-07-0759.53.pdiff [522 B]
Get:145 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-07-2004.03.pdiff [222 B]
Get:146 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-08-0800.00.pdiff [5,269 B]
Get:147 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-08-1959.50.pdiff [353 B]
Get:148 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-0159.52.pdiff [374 B]
Get:149 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-1359.56.pdiff [293 B]
Get:150 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-09-2000.45.pdiff [422 B]
Get:151 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-0159.55.pdiff [947 B]
Get:152 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-0759.42.pdiff [260 B]
Get:153 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-1359.42.pdiff [2,005 B]
Get:154 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-10-1959.58.pdiff [530 B]
Get:155 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-0159.46.pdiff [2,267 B]
Get:156 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-1400.04.pdiff [384 kB]
Get:157 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-11-1959.46.pdiff [116 kB]
Get:158 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-12-0159.45.pdiff [740 B]
Get:159 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-12-0801.37.pdiff [193 kB]
Get:160 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-13-1359.55.pdiff [497 B]
Get:161 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-14-1359.48.pdiff [32 B]
Get:162 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-14-2000.12.pdiff [163 B]
Get:163 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-15-0200.05.pdiff [68 B]
Get:164 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-16-1400.52.pdiff [10.4 kB]
Get:165 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-16-2000.50.pdiff [3,257 B]
Get:166 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-0159.56.pdiff [271 B]
Get:167 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-0759.56.pdiff [304 B]
Get:168 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-2000.05.pdiff [138 B]
Get:168 http://deb.debian.org/debian buster-backports/main arm64 Contents (deb) 2021-02-17-2000.05.pdiff [138 B]
Get:169 http://deb.debian.org/debian buster-backports/contrib armhf Packages 2021-02-11-1400.04.pdiff [558 B]
Get:169 http://deb.debian.org/debian buster-backports/contrib armhf Packages 2021-02-11-1400.04.pdiff [558 B]
Get:170 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-05-1405.08.pdiff [836 B]
Get:171 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-11-1400.04.pdiff [558 B]
Get:171 http://deb.debian.org/debian buster-backports/contrib arm64 Packages 2021-02-11-1400.04.pdiff [558 B]
Get:172 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-05-1405.08.pdiff [252 B]
Get:173 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-11-1400.04.pdiff [1,901 B]
Get:173 http://deb.debian.org/debian buster-backports/contrib arm64 Contents (deb) 2021-02-11-1400.04.pdiff [1,901 B]
Get:174 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb) 2021-02-11-1400.04.pdiff [1,927 B]
Get:174 http://deb.debian.org/debian buster-backports/contrib armhf Contents (deb) 2021-02-11-1400.04.pdiff [1,927 B]
Get:175 http://deb.debian.org/debian buster/main arm64 Packages [10.5 MB]
Get:176 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils armhf Packages [7,475 B]
Get:177 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils arm64 Packages [10.7 kB]
Get:178 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils arm64 Contents (deb) [47.0 kB]
Get:179 https://mirrors.dotsrc.org/armbian-apt buster/buster-utils armhf Contents (deb) [8,999 B]
Get:180 https://mirrors.dotsrc.org/armbian-apt buster/buster-desktop arm64 Packages [26.5 kB]
Get:181 http://deb.debian.org/debian buster/main arm64 Contents (deb) [36.5 MB]
Get:182 http://deb.debian.org/debian buster/main armhf Contents (deb) [36.5 MB]
Get:183 http://deb.debian.org/debian buster/non-free arm64 Packages [64.3 kB]
Get:184 http://deb.debian.org/debian buster/non-free armhf Packages [74.5 kB]
Get:185 http://deb.debian.org/debian buster/non-free armhf Contents (deb) [779 kB]
Fetched 134 MB in 1min 19s (1,689 kB/s)

Reading package lists... Done
N: Repository 'http://deb.debian.org/debian buster InRelease' changed its 'Version' value from '10.7' to '10.8'
root@helios64:~#
root@helios64:~#
root@helios64:~# apt -y install tuned
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  gawk python3-configobj python3-decorator python3-pyudev python3-six
  virt-what
Suggested packages:
  gawk-doc python-configobj-doc
Recommended packages:
  linux-cpupower
The following NEW packages will be installed:
  gawk python3-configobj python3-decorator python3-pyudev python3-six tuned
  virt-what
0 upgraded, 7 newly installed, 0 to remove and 37 not upgraded.
Need to get 845 kB of archives.
After this operation, 3,465 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian buster/main arm64 gawk arm64 1:4.2.1+dfsg-1 [628 kB]
Get:2 http://deb.debian.org/debian buster/main arm64 python3-six all 1.12.0-1 [15.7 kB]
Get:3 http://deb.debian.org/debian buster/main arm64 python3-configobj all 5.0.6-3 [35.7 kB]
Get:4 http://deb.debian.org/debian buster/main arm64 python3-decorator all 4.3.0-1.1 [14.5 kB]
Get:5 http://deb.debian.org/debian buster/main arm64 python3-pyudev all 0.21.0-1 [40.2 kB]
Get:6 http://deb.debian.org/debian buster/main arm64 virt-what arm64 1.19-1 [15.5 kB]
Get:7 http://deb.debian.org/debian buster/main arm64 tuned all 2.10.0-1 [96.1 kB]
Fetched 845 kB in 2s (478 kB/s)
Selecting previously unselected package gawk.
(Reading database ... 39228 files and directories currently installed.)
Preparing to unpack .../0-gawk_1%3a4.2.1+dfsg-1_arm64.deb ...
Unpacking gawk (1:4.2.1+dfsg-1) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../1-python3-six_1.12.0-1_all.deb ...
Unpacking python3-six (1.12.0-1) ...
Selecting previously unselected package python3-configobj.
Preparing to unpack .../2-python3-configobj_5.0.6-3_all.deb ...
Unpacking python3-configobj (5.0.6-3) ...
Selecting previously unselected package python3-decorator.
Preparing to unpack .../3-python3-decorator_4.3.0-1.1_all.deb ...
Unpacking python3-decorator (4.3.0-1.1) ...
Selecting previously unselected package python3-pyudev.
Preparing to unpack .../4-python3-pyudev_0.21.0-1_all.deb ...
Unpacking python3-pyudev (0.21.0-1) ...
Selecting previously unselected package virt-what.
Preparing to unpack .../5-virt-what_1.19-1_arm64.deb ...
Unpacking virt-what (1.19-1) ...
Selecting previously unselected package tuned.
Preparing to unpack .../6-tuned_2.10.0-1_all.deb ...
Unpacking tuned (2.10.0-1) ...
Setting up virt-what (1.19-1) ...
Setting up gawk (1:4.2.1+dfsg-1) ...
Setting up python3-six (1.12.0-1) ...
Setting up python3-decorator (4.3.0-1.1) ...
Setting up python3-configobj (5.0.6-3) ...
Setting up python3-pyudev (0.21.0-1) ...
Setting up tuned (2.10.0-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/tuned.service → /lib/systemd/system/tuned.service.
Processing triggers for dbus (1.12.20-0+deb10u1) ...
Processing triggers for man-db (2.8.5-2) ...
root@helios64:~# tuned-adm profile server-powersave
root@helios64:~# systemctl restart tuned
root@helios64:~# cd /boot
root@helios64:/boot# ls
armbianEnv.txt                  dtb-5.10.12-rockchip64
armbian_first_run.txt.template  Image
boot.bmp                        initrd.img-5.10.12-rockchip64
boot.cmd                        System.map-5.10.12-rockchip64
boot.scr                        uInitrd
config-5.10.12-rockchip64       uInitrd-5.10.12-rockchip64
dtb                             vmlinuz-5.10.12-rockchip64
root@helios64:/boot# nano armbianEnv.txt
  GNU nano 3.2                     armbianEnv.txt

verbosity=7
bootlogo=false
console=serial
extraargs=earlyprintk ignore_loglevel
overlay_prefix=rockchip
rootdev=UUID=e4e3bcd6-3f03-4362-bbe0-f1654138c5d8
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

root@helios64:/boot# nano armbianEnv.txt
  GNU nano 3.2                     armbianEnv.txt

verbosity=7
bootlogo=false
console=serial
extraargs=earlyprintk ignore_loglevel fsck.repair=yes
overlay_prefix=rockchip
rootdev=UUID=e4e3bcd6-3f03-4362-bbe0-f1654138c5d8
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

root@helios64:/boot# ls
armbianEnv.txt                  dtb-5.10.12-rockchip64
armbian_first_run.txt.template  Image
boot.bmp                        initrd.img-5.10.12-rockchip64
boot.cmd                        System.map-5.10.12-rockchip64
boot.scr                        uInitrd
config-5.10.12-rockchip64       uInitrd-5.10.12-rockchip64
dtb                             vmlinuz-5.10.12-rockchip64
root@helios64:/boot# more boot.scr
'V▒▒A▒`▒
▒▒More--(0%)
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

setenv load_addr "0x9000000"
setenv overlay_error "false"
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv rootfstype "ext4"
setenv docker_optimizations "on"
setenv earlycon "off"

echo "Boot script loaded from ${devtype} ${devnum}"

if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
        load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
        env import -t ${load_addr} ${filesize}
fi

if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv cons
oleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv conso
leargs "console=ttyS2,1500000 ${consoleargs}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}";
 fi
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=boo
tsplash.armbian ${consoleargs}"; fi

# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs
} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=
${usbstoragequirks} ${extraargs} ${extraboardargs}"

if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgro
up_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image

load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-${overlay_file}.dtbo; then
                echo "Applying kernel provided DT overlay ${overlay_prefix}-${ov
erlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
for overlay_file in ${user_overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overla
y_file}.dtbo; then
                echo "Applying user provided DT overlay ${overlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
if test "${overlay_error}" = "true"; then
        echo "Error applying DT overlays, restoring original DT"
        load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-fixup.scr; then
                echo "Applying kernel provided DT fixup script (${overlay_prefix
}-fixup.scr)"
                source ${load_addr}
        fi
        if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
                load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
                echo "Applying user provided fixup script (fixup.scr)"
                source ${load_addr}
        fi
fi
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
root@helios64:/boot# mkimage -C none -A arm -T scrit -d /boot/boot.cmd /boot/boot.scr

Invalid image type, supported are:
        Unknown image type  Unknown image type
        aisimage         Davinci AIS image
        atmelimage       ATMEL ROM-Boot Image
        filesystem       Filesystem Image
        firmware         Firmware
        firmware_ivt     Firmware with HABv4 IVT
        flat_dt          Flat Device Tree
        fpga             FPGA Image
        gpimage          TI Keystone SPL Image
        imx8image        NXP i.MX8 Boot Image
        imx8mimage       NXP i.MX8M Boot Image
        imximage         Freescale i.MX Boot Image
        invalid          Invalid Image
        kernel           Kernel Image
        kernel_noload    Kernel Image (no loading done)
        kwbimage         Kirkwood Boot Image
        lpc32xximage     LPC32XX Boot Image
        mtk_image        MediaTek BootROM loadable Image
        multi            Multi-File Image
        mxsimage         Freescale MXS Boot Image
        omapimage        TI OMAP SPL With GP CH
        pblimage         Freescale PBL Boot Image
        pmmc             TI Power Management Micro-Controller Firmware
        ramdisk          RAMDisk Image
        rkimage          Rockchip Boot Image
        rksd             Rockchip SD Boot Image
        rkspi            Rockchip SPI Boot Image
        script           Script
        socfpgaimage     Altera SoCFPGA CV/AV preloader
        socfpgaimage_v1  Altera SoCFPGA A10 preloader
        standalone       Standalone Program
        stm32image       STMicroelectronics STM32 Image
        tee              Trusted Execution Environment Image
        ublimage         Davinci UBL image
        vybridimage      Vybrid Boot Image
        x86_setup        x86 setup.bin
        zynqimage        Xilinx Zynq Boot Image
        zynqmpbif        Xilinx ZynqMP Boot Image (bif)
        zynqmpimage      Xilinx ZynqMP Boot Image

Error: Invalid image type
Usage: mkimage -l image
          -l ==> list image header information
       mkimage [-x] -A arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...] image
          -A ==> set architecture to 'arch'
          -O ==> set operating system to 'os'
          -T ==> set image type to 'type'
          -C ==> set compression type 'comp'
          -a ==> set load address to 'addr' (hex)
          -e ==> set entry point to 'ep' (hex)
          -n ==> set image name to 'name'
          -d ==> use image data from 'datafile'
          -x ==> set XIP (execute in place)
       mkimage [-D dtc_options] [-f fit-image.its|-f auto|-F] [-b <dtb> [-b <dtb>]] [-i <ramdisk.cpio.gz>] fit-image
           <dtb> file is used with -f auto, it may occur multiple times.
          -D => set all options for device tree compiler
          -f => input filename for FIT source
          -i => input filename for ramdisk file
Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)
       mkimage -V ==> print version information and exit
Use '-T list' to see a list of available image types
root@helios64:/boot# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
Image Name:
Created:      Fri Feb 19 16:30:44 2021
Image Type:   ARM Linux Script (uncompressed)
Data Size:    3121 Bytes = 3.05 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 3113 Bytes = 3.04 KiB = 0.00 MiB
root@helios64:/boot# more boot.scr
'VQ>W4`/▒
▒▒More--(0%)
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

setenv load_addr "0x9000000"
setenv overlay_error "false"
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv rootfstype "ext4"
setenv docker_optimizations "on"
setenv earlycon "off"

echo "Boot script loaded from ${devtype} ${devnum}"

if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
        load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
        env import -t ${load_addr} ${filesize}
fi

if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv cons
oleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv conso
leargs "console=ttyS2,1500000 ${consoleargs}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}";
 fi
if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=boo
tsplash.armbian ${consoleargs}"; fi

# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs
} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=
${usbstoragequirks} ${extraargs} ${extraboardargs}"

if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgro
up_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image

load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-${overlay_file}.dtbo; then
                echo "Applying kernel provided DT overlay ${overlay_prefix}-${ov
erlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
for overlay_file in ${user_overlays}; do
        if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overla
y_file}.dtbo; then
                echo "Applying user provided DT overlay ${overlay_file}.dtbo"
                fdt apply ${load_addr} || setenv overlay_error "true"
        fi
done
if test "${overlay_error}" = "true"; then
        echo "Error applying DT overlays, restoring original DT"
        load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
        if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/rockchip/overlay/
${overlay_prefix}-fixup.scr; then
                echo "Applying kernel provided DT fixup script (${overlay_prefix
}-fixup.scr)"
                source ${load_addr}
        fi
        if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
                load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
                echo "Applying user provided fixup script (fixup.scr)"
                source ${load_addr}
        fi
fi
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
root@helios64:/boot# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
Image Name:
Created:      Fri Feb 19 16:31:00 2021
Image Type:   ARM Linux Script (uncompressed)
Data Size:    3121 Bytes = 3.05 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 3113 Bytes = 3.04 KiB = 0.00 MiB
root@helios64:/boot# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  armbian-config armbian-firmware armbian-zsh base-files bind9-host
  device-tree-compiler dnsutils file iproute2 libbind9-161 libdns-export1104
  libdns1104 libgnutls30 libirs161 libisc-export1100 libisc1100 libisccc161
  libisccfg163 liblwres161 libmagic-mgc libmagic1 libnss-myhostname
  libpam-systemd libssl-dev libssl1.1 libsystemd0 libudev1 libzstd1
  linux-buster-root-current-helios64 linux-dtb-current-rockchip64
  linux-image-current-rockchip64 openssl systemd systemd-sysv udev unzip
  wireguard-tools
37 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 66.4 MB of archives.
After this operation, 7,168 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:2 http://security.debian.org buster/updates/main arm64 libzstd1 arm64 1.3.8+dfsg-3+deb10u1 [216 kB]
Get:3 http://deb.debian.org/debian buster/main arm64 base-files arm64 10.3+deb10u8 [69.9 kB]
Get:9 http://deb.debian.org/debian buster/main arm64 libsystemd0 arm64 241-7~deb10u6 [314 kB]
Get:10 http://security.debian.org buster/updates/main arm64 libssl-dev arm64 1.1.1d-0+deb10u5 [1,686 kB]
Get:11 http://deb.debian.org/debian buster/main arm64 libnss-myhostname arm64 241-7~deb10u6 [122 kB]
Get:12 http://deb.debian.org/debian buster/main arm64 libpam-systemd arm64 241-7~deb10u6 [201 kB]
Get:6 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 linux-buster-root-current-helios64 arm64 21.02.2 [416 kB]
Get:13 http://deb.debian.org/debian buster/main arm64 systemd arm64 241-7~deb10u6 [3,258 kB]
Get:4 https://imola.armbian.com/apt buster/main arm64 armbian-firmware all 21.02.2 [6,922 kB]
Get:1 https://mirrors.netix.net/armbian/apt buster/main arm64 armbian-config all 21.02.2 [44.8 kB]
Get:5 https://mirrors.netix.net/armbian/apt buster/main arm64 armbian-zsh all 21.02.2 [1,700 kB]
Get:14 http://security.debian.org buster/updates/main arm64 libssl1.1 arm64 1.1.1d-0+deb10u5 [1,382 kB]
Get:15 http://deb.debian.org/debian buster/main arm64 udev arm64 241-7~deb10u6 [1,245 kB]
Get:16 http://security.debian.org buster/updates/main arm64 dnsutils arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [361 kB]
Get:17 http://security.debian.org buster/updates/main arm64 bind9-host arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [270 kB]
Get:18 http://security.debian.org buster/updates/main arm64 libbind9-161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [245 kB]
Get:19 http://deb.debian.org/debian buster/main arm64 libudev1 arm64 241-7~deb10u6 [146 kB]
Get:20 http://deb.debian.org/debian buster/main arm64 systemd-sysv arm64 241-7~deb10u6 [100 kB]
Get:8 https://mirrors.netix.net/armbian/apt buster/main arm64 linux-image-current-rockchip64 arm64 21.02.2 [39.9 MB]
Get:21 http://deb.debian.org/debian buster/main arm64 libgnutls30 arm64 3.6.7-4+deb10u6 [1,062 kB]
Get:22 http://security.debian.org buster/updates/main arm64 libisccfg163 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [265 kB]
Get:23 http://security.debian.org buster/updates/main arm64 libisccc161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [236 kB]
Get:24 http://security.debian.org buster/updates/main arm64 libirs161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [236 kB]
Get:25 http://security.debian.org buster/updates/main arm64 libdns1104 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [1,130 kB]
Get:26 http://deb.debian.org/debian buster/main arm64 iproute2 arm64 4.20.0-2+deb10u1 [805 kB]
Get:27 http://deb.debian.org/debian buster/main arm64 file arm64 1:5.35-4+deb10u2 [66.5 kB]
Get:28 http://deb.debian.org/debian buster/main arm64 libmagic1 arm64 1:5.35-4+deb10u2 [115 kB]
Get:29 http://security.debian.org buster/updates/main arm64 libisc1100 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [436 kB]
Get:30 http://deb.debian.org/debian buster/main arm64 libmagic-mgc arm64 1:5.35-4+deb10u2 [242 kB]
Get:31 http://security.debian.org buster/updates/main arm64 liblwres161 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [249 kB]
Get:32 http://deb.debian.org/debian buster/main arm64 unzip arm64 6.0-23+deb10u2 [166 kB]
Get:33 http://security.debian.org buster/updates/main arm64 libisc-export1100 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [369 kB]
Get:34 http://deb.debian.org/debian buster/main arm64 device-tree-compiler arm64 1.4.7-4 [251 kB]
Get:35 http://deb.debian.org/debian buster-backports/main arm64 wireguard-tools arm64 1.0.20200827-1~bpo10+1 [90.5 kB]
Get:36 http://security.debian.org buster/updates/main arm64 libdns-export1104 arm64 1:9.11.5.P4+dfsg-5.1+deb10u3 [901 kB]
Get:37 http://security.debian.org buster/updates/main arm64 openssl arm64 1.1.1d-0+deb10u5 [823 kB]
Get:7 https://imola.armbian.com/apt buster/main arm64 linux-dtb-current-rockchip64 arm64 21.02.2 [311 kB]
Fetched 66.4 MB in 40s (1,670 kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../base-files_10.3+deb10u8_arm64.deb ...
Unpacking base-files (10.3+deb10u8) over (10.3+deb10u7) ...
Setting up base-files (10.3+deb10u8) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../libsystemd0_241-7~deb10u6_arm64.deb ...
Unpacking libsystemd0:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Setting up libsystemd0:arm64 (241-7~deb10u6) ...
(Reading database ... 39691 files and directories currently installed.)
Preparing to unpack .../libnss-myhostname_241-7~deb10u6_arm64.deb ...
Unpacking libnss-myhostname:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Preparing to unpack .../libpam-systemd_241-7~deb10u6_arm64.deb ...
Unpacking libpam-systemd:arm64 (241-7~deb10u6) over (241-7~deb10u5) ...
Preparing to unpack .../systemd_241-7~deb10u6_arm64.deb ...
Unpacking systemd (241-7~deb10u6) over (241-7~deb10u5) ...
[  608.261405] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  608.261904] Modules linked in: rfkill governor_performance snd_soc_hdmi_codec r8152 snd_soc_rockchip_i2s hantro_vpu(C) rockchip_vdec(C) rockchip_rga snd_soc_core rockchipdrm v4l2_h264 snd_pcm_dmaengine videobuf2_dma_contig snd_pcm dw_mipi_dsi v4l2_mem2mem videobuf2_dma_sg videobuf2_vmalloc dw_hdmi snd_timer videobuf2_memops analogix_dp videobuf2_v4l2 leds_pwm gpio_charger panfrost drm_kms_helper videobuf2_common pwm_fan snd cec gpu_sched fusb302 videodev soundcore rc_core tcpm sg drm typec mc drm_panel_orientation_quirks gpio_beeper cpufreq_dt zram ledtrig_netdev lm75 ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys
[  608.268027] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G         C        5.10.12-rockchip64 #21.02.1
[  608.268811] Hardware name: Helios64 (DT)
[  608.269166] pstate: 000003c5 (nzcv DAIF -PAN -UAO -TCO BTYPE=--)
[  608.269707] pc : do_undefinstr+0x2ec/0x318
[  608.270075] lr : do_undefinstr+0x1e4/0x318
[  608.270441] sp : ffff800011c13840
[  608.270738] x29: ffff800011c13840 x28: ffff000040311d00
[  608.271217] x27: ffff000040004300 x26: ffff800011cf3de0
[  608.271694] x25: 0000000000000001 x24: 0000000000000000
[  608.272172] x23: 00000000800003c5 x22: ffff800010e66f24
[  608.272649] x21: ffff800011c13a20 x20: ffff800011c138d0
[  608.273126] x19: ffff8000118b9948 x18: 0000000000000000
[  608.273603] x17: 0000000000000000 x16: 0000000000000000
[  608.274080] x15: 0000007325c21884 x14: 00000000000003b8
[  608.274557] x13: 0000000000000155 x12: 0000000000000001
[  608.275034] x11: 0000000000000040 x10: ffff80001194eea8
[  608.275511] x9 : ffff80001194eea0 x8 : ffff000040400270
[  608.275989] x7 : 0000000000000000 x6 : ffff800011c13898
[  608.276466] x5 : 00000000d5300000 x4 : ffff8000118c6270
[  608.276943] x3 : 0000000000010002 x2 : 0000000000010001
[  608.277421] x1 : ffff000040311d00 x0 : 00000000800003c5
[  608.277898] Call trace:
[  608.278123]  do_undefinstr+0x2ec/0x318
[  608.278464]  el1_undef+0x30/0x50
[  608.278757]  el1_sync_handler+0x88/0xe8
[  608.279103]  el1_sync+0x7c/0x100
[  608.279396]  enter_from_kernel_mode.isra.5+0x14/0x40
[  608.279839]  el1_undef+0x1c/0x50
[  608.280131]  el1_sync_handler+0x88/0xe8
[  608.280476]  el1_sync+0x7c/0x100
[  608.280770]  check_preemption_disabled+0x38/0x110
[  608.281190]  rcu_nmi_enter+0x28/0x150
[  608.281520]  rcu_irq_enter+0x10/0x70
[  608.281843]  enter_from_kernel_mode.isra.5+0x28/0x40
[  608.282285]  el1_abort+0x28/0x70
[  608.282577]  el1_sync_handler+0x64/0xe8
[  608.282922]  el1_sync+0x7c/0x100
[  608.283214]  enter_from_kernel_mode.isra.5+0x10/0x40
[  608.283657]  el1_undef+0x1c/0x50
[  608.283949]  el1_sync_handler+0x88/0xe8
[  608.284293]  el1_sync+0x7c/0x100
[  608.284588]  __radix_tree_lookup+0x68/0xb0
[  608.284958]  generic_handle_irq+0x1c/0x48
[  608.285318]  __handle_domain_irq+0x94/0x108
[  608.285697]  gic_handle_irq+0xc0/0x140
[  608.286033]  el1_irq+0xc0/0x180
[  608.286319]  arch_cpu_idle+0x18/0x28
[  608.286640]  default_idle_call+0x44/0x1bc
[  608.287002]  do_idle+0x204/0x278
[  608.287293]  cpu_startup_entry+0x24/0x60
[  608.287648]  secondary_start_kernel+0x170/0x180
[  608.288057] Code: f9401bf7 17ffff7d a9025bf5 f9001bf7 (d4210000)
[  608.288608] ---[ end trace cb8b19b43b3c01cd ]---
[  608.289021] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt
[  608.289678] SMP: stopping secondary CPUs
[  608.290036] Kernel Offset: disabled
[  608.290351] CPU features: 0x0240022,6100200c
[  608.290732] Memory Limit: none
[  608.291021] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---

 

[Kernel panic in 5.9.14 20.11.10]

Quote

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x82
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79784
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5674
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3279 bytes read in 5 ms (639.6 KiB/s)
## Executing script at 00500000
dev: vdd_log @ vdd-log
dev: vdd_center @ DCDC_REG1
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
16181568 bytes read in 696 ms (22.2 MiB/s)
27507200 bytes read in 1168 ms (22.5 MiB/s)
81968 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16181504 Bytes = 15.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4f81000, end f5eef900 ... OK
   Loading Device Tree to 00000000f4f04000, end 00000000f4f80fff ... OK

Starting kernel ...

[   24.738473] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: sched_ttwu_pending+0x160/0x160
[   24.739419] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.9.14-rockchip64 #20.11.4
[   24.740194] Hardware name: Helios64 (DT)
[   24.740546] Call trace:
[   24.740772]  dump_backtrace+0x0/0x200
[   24.741103]  show_stack+0x18/0x28
[   24.741406]  dump_stack+0xc0/0x11c
[   24.741714]  panic+0x164/0x364
[   24.741992]  __stack_chk_fail+0x3c/0x40
[   24.742336]  send_call_function_single_ipi+0x0/0x20
[   24.742775]  flush_smp_call_function_queue+0x114/0x250
[   24.743234]  generic_smp_call_function_single_interrupt+0x14/0x20
[   24.743779]  handle_IPI+0x10c/0x3c8
[   24.744096]  gic_handle_irq+0x168/0x170
[   24.744440]  el1_irq+0xb8/0x180
[   24.744724]  arch_cpu_idle+0x14/0x20
[   24.745046]  do_idle+0x1fc/0x270
[   24.745337]  cpu_startup_entry+0x24/0x60
[   24.745690]  secondary_start_kernel+0x16c/0x180
[   24.746099] SMP: stopping secondary CPUs
[   24.746456] Kernel Offset: disabled
[   24.746770] CPU features: 0x0240022,2000200c
[   24.747149] Memory Limit: none
[   24.747435] Rebooting in 90 seconds..
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x82
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 322
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80909
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5674
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)

SoC: Rockchip rk3399
Reset cause: RST
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3279 bytes read in 5 ms (639.6 KiB/s)
## Executing script at 00500000
dev: vdd_log @ vdd-log
dev: vdd_center @ DCDC_REG1
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
16181568 bytes read in 691 ms (22.3 MiB/s)
27507200 bytes read in 1168 ms (22.5 MiB/s)
81968 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16181504 Bytes = 15.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4f81000, end f5eef900 ... OK
   Loading Device Tree to 00000000f4f04000, end 00000000f4f80fff ... OK

Starting kernel ...

[   40.035068] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: sched_ttwu_pending+0x160/0x160
[   40.036021] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.9.14-rockchip64 #20.11.4
[   40.036797] Hardware name: Helios64 (DT)
[   40.037148] Call trace:
[   40.037375]  dump_backtrace+0x0/0x200
[   40.037705]  show_stack+0x18/0x28
[   40.038006]  dump_stack+0xc0/0x11c
[   40.038314]  panic+0x164/0x364
[   40.038591]  __stack_chk_fail+0x3c/0x40
[   40.038935]  send_call_function_single_ipi+0x0/0x20
[   40.039372]  flush_smp_call_function_queue+0x114/0x250
[   40.039832]  generic_smp_call_function_single_interrupt+0x14/0x20
[   40.040377]  handle_IPI+0x10c/0x3c8
[   40.040695]  gic_handle_irq+0x168/0x170
[   40.041039]  el1_irq+0xb8/0x180
[   40.041324]  arch_cpu_idle+0x14/0x20
[   40.041646]  do_idle+0x1fc/0x270
[   40.041937]  cpu_startup_entry+0x24/0x60
[   40.042288]  secondary_start_kernel+0x16c/0x180
[   40.042698] SMP: stopping secondary CPUs
[   40.043054] Kernel Offset: disabled
[   40.043365] CPU features: 0x0240022,2000200c
[   40.043746] Memory Limit: none
[   40.044033] Rebooting in 90 seconds..
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 324
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 80419
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5674
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)

SoC: Rockchip rk3399
Reset cause: RST
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3279 bytes read in 6 ms (533.2 KiB/s)
## Executing script at 00500000
dev: vdd_log @ vdd-log
dev: vdd_center @ DCDC_REG1
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
16181568 bytes read in 697 ms (22.1 MiB/s)
27507200 bytes read in 1174 ms (22.3 MiB/s)
81968 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16181504 Bytes = 15.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4f81000, end f5eef900 ... OK
   Loading Device Tree to 00000000f4f04000, end 00000000f4f80fff ... OK

Starting kernel ...

[   38.759473] Internal error: Oops: 9600004e [#1] PREEMPT SMP
[   38.759976] Modules linked in: snd_soc_hdmi_codec r8152 fusb302 pwm_fan hantro_vpu(C) leds_pwm rockchip_vdec(C) snd_soc_rockchip_i2s gpio_charger v4l2_h264 panfrost tcpm snd_soc_core rockchip_rga videobuf2_dma_contig snd_pcm_dmaengine typec v4l2_mem2mem gpu_sched snd_pcm videobuf2_dma_sg videobuf2_vmalloc videobuf2_memops snd_timer videobuf2_v4l2 snd videobuf2_common soundcore videodev sg mc rockchipdrm dw_mipi_dsi dw_hdmi analogix_dp drm_kms_helper cec rc_core drm drm_panel_orientation_quirks gpio_beeper cpufreq_dt zfs(POE) zunicode(POE) zzstd(OE) nfsd zlua(OE) auth_rpcgss zcommon(POE) nfs_acl znvpair(POE) zavl(POE) lockd icp(POE) grace spl(OE) ledtrig_netdev lm75 sunrpc ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   38.766762] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.9.14-rockchip64 #20.11.4
[   38.767536] Hardware name: Helios64 (DT)
[   38.767890] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
[   38.768392] pc : __update_load_avg_se+0x44/0x310
[   38.768808] lr : update_load_avg+0x4e4/0x5f0
[   38.769186] sp : ffff800011b03d40
[   38.769483] x29: ffff800011b03d40 x28: ffff0000f6eae580
[   38.769956] x27: 0000000000000001 x26: ffff800011522db0
[   38.770428] x25: 0000000000000005 x24: ffff0000f6fa00c0
[   38.770900] x23: ffff0000f77c7c40 x22: 0000000000000005
[   38.771372] x21: 0000000903da1aad x20: ffff0000f6fa00c0
[   38.771844] x19: ffff0000f77c7cc0 x18: 0000000000000004
[   38.772315] x17: 0000000000000001 x16: 0000000000000019
[   38.772786] x15: ffff80001185a098 x14: ffffffffffffffff
[   38.773257] x13: 000000000000021e x12: 000000000000010f
[   38.773729] x11: 0000000000000001 x10: 0000000000000a30
[   38.774200] x9 : 0000000000000000 x8 : 0000000000000000
[   38.774672] x7 : 0000000000000000 x6 : ffff0000f6fa0180
[   38.775143] x5 : 0000000000000060 x4 : 0000000903d89800
[   38.775614] x3 : 00000000000182ad x2 : ffff0000f6fa00c0
[   38.776085] x1 : ffff0000f77c7cc0 x0 : 0000000903da1aad
[   38.776557] Call trace:
[   38.776781]  __update_load_avg_se+0x44/0x310
[   38.777163]  update_load_avg+0x4e4/0x5f0
[   38.777515]  enqueue_entity+0x68/0x228
[   38.777851]  enqueue_task_fair+0x94/0x450
[   38.778210]  ttwu_do_activate+0x88/0x150
[   38.778561]  sched_ttwu_pending+0xbc/0x160
[   38.778931]  flush_smp_call_function_queue+0x114/0x250
[   38.779390]  generic_smp_call_function_single_interrupt+0x14/0x20
[   38.779932]  handle_IPI+0x10c/0x3c8
[   38.780248]  gic_handle_irq+0x168/0x170
[   38.780592]  el1_irq+0xb8/0x180
[   38.780876]  arch_cpu_idle+0x14/0x20
[   38.781198]  do_idle+0x1fc/0x270
[   38.781488]  cpu_startup_entry+0x24/0x60
[   38.781841]  secondary_start_kernel+0x16c/0x180
[   38.782251] Code: eb040003 540008e4 d34afc65 b40007e5 (a90153f3)
[   38.782801] ---[ end trace 750eb2db6f8efac2 ]---
[   38.783213] Kernel panic - not syncing: Fatal exception in interrupt
[   38.783776] SMP: stopping secondary CPUs
[   38.784134] Kernel Offset: disabled
[   38.784447] CPU features: 0x0240022,2000200c
[   38.784826] Memory Limit: none
[   38.785113] Rebooting in 90 seconds..

 

[Kernel panic in 5.9.14 20.11.10]

Quote

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x82
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79784
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5674
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3279 bytes read in 5 ms (639.6 KiB/s)
## Executing script at 00500000
dev: vdd_log @ vdd-log
dev: vdd_center @ DCDC_REG1
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
16181568 bytes read in 696 ms (22.2 MiB/s)
27507200 bytes read in 1168 ms (22.5 MiB/s)
81968 bytes read in 13 ms (6 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16181504 Bytes = 15.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4f81000, end f5eef900 ... OK
   Loading Device Tree to 00000000f4f04000, end 00000000f4f80fff ... OK

Starting kernel ...

[   24.738473] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: sched_ttwu_pending+0x160/0x160
[   24.739419] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.9.14-rockchip64 #20.11.4
[   24.740194] Hardware name: Helios64 (DT)
[   24.740546] Call trace:
[   24.740772]  dump_backtrace+0x0/0x200
[   24.741103]  show_stack+0x18/0x28
[   24.741406]  dump_stack+0xc0/0x11c
[   24.741714]  panic+0x164/0x364
[   24.741992]  __stack_chk_fail+0x3c/0x40
[   24.742336]  send_call_function_single_ipi+0x0/0x20
[   24.742775]  flush_smp_call_function_queue+0x114/0x250
[   24.743234]  generic_smp_call_function_single_interrupt+0x14/0x20
[   24.743779]  handle_IPI+0x10c/0x3c8
[   24.744096]  gic_handle_irq+0x168/0x170
[   24.744440]  el1_irq+0xb8/0x180
[   24.744724]  arch_cpu_idle+0x14/0x20
[   24.745046]  do_idle+0x1fc/0x270
[   24.745337]  cpu_startup_entry+0x24/0x60
[   24.745690]  secondary_start_kernel+0x16c/0x180
[   24.746099] SMP: stopping secondary CPUs
[   24.746456] Kernel Offset: disabled
[   24.746770] CPU features: 0x0240022,2000200c
[   24.747149] Memory Limit: none
[   24.747435] Rebooting in 90 seconds..

 

[Kernel panic in 5.9.14 20.11.10]

I've tried the sysfs.conf changes as suggest and rebooted - immediate kernel panic

[Kernel panic in 5.9.14 20.11.10]

17 hours ago, gprovost said:

@SymbiosisSystems Have you tried each tweak individually ?

Hi Gauthier, no I did them both together. If you think I'll have more success with one rather than both which would you suggest ? This new build seems to be unstable again which is a step backwards. CPU running at 1.2GHz is at 48c without any NAS transfers occuring.

[Kernel panic in 5.9.14 20.11.10]

I thought I'd rebuild the NAS with the latest image in the hope that it would be more stable. Unfortunately my hopes were in vain. I was in the middle of doing an rsync and it crashed with a kernel panic. Had a look on the forum and implemented the two suggestions of limiting the cpu to 1200MHz and tweaking the voltages. CPU @ 50c as reported in the login header. Anyway after updating the setting I reboot it and it crashed immediately ! The same SMP issue that seems to have been plaguing this board since release

 

Quote

[  231.154881] reboot: Restarting system
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 323
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 82367
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xe5674
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.10-armbian (Jan 05 2021 - 00:07:57 +0100)

SoC: Rockchip rk3399
Reset cause: RST
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 4!?
4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3279 bytes read in 5 ms (639.6 KiB/s)
## Executing script at 00500000
dev: vdd_log @ vdd-log
dev: vdd_center @ DCDC_REG1
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
16185666 bytes read in 695 ms (22.2 MiB/s)
27507200 bytes read in 1172 ms (22.4 MiB/s)
81968 bytes read in 12 ms (6.5 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16185602 Bytes = 15.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4f80000, end f5eef902 ... OK
   Loading Device Tree to 00000000f4f03000, end 00000000f4f7ffff ... OK

Starting kernel ...

[   23.337713] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[   23.338213] Modules linked in: r8152 snd_soc_hdmi_codec snd_soc_rockchip_i2s snd_soc_core snd_pcm_dmaengine leds_pwm snd_pcm pwm_fan gpio_charger snd_timer snd rockchip_vdec(C) panfrost hantro_vpu(C) soundcore rockchip_rga gpu_sched rockchipdrm v4l2_h264 fusb302 videobuf2_dma_contig videobuf2_dma_sg dw_mipi_dsi v4l2_mem2mem videobuf2_vmalloc tcpm dw_hdmi videobuf2_memops analogix_dp typec drm_kms_helper videobuf2_v4l2 videobuf2_common cec videodev rc_core mc drm sg drm_panel_orientation_quirks gpio_beeper cpufreq_dt zfs(POE) zunicode(POE) zzstd(OE) zlua(OE) nfsd auth_rpcgss nfs_acl zcommon(POE) lockd znvpair(POE) zavl(POE) grace icp(POE) spl(OE) ledtrig_netdev sunrpc lm75 ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   23.345003] CPU: 4 PID: 0 Comm: swapper/4 Tainted: P         C OE     5.9.14-rockchip64 #20.11.4
[   23.345778] Hardware name: Helios64 (DT)
[   23.346130] pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)
[   23.346650] pc : flush_smp_call_function_queue+0x40/0x250
[   23.346658] lr : flush_smp_call_function_queue+0x28/0x250
[   23.347617] sp : ffff800011afbf20
[   23.347620] x29: ffff800011afbf20 x28: ffff0000f6ead700
[   23.348397] x27: 0000000000000001 x26: ffff800011522db0
[   23.348402] x25: 0000000000000004 x24: 0000000000000000
[   23.349350] x23: ffff800011bc3df0 x22: 0000000000000001
[   23.349358] x21: ffff8000e6283000 x20: ffff800011525a40
[   23.350300] x19: ffff800011522db0 x18: 0000000000000000
[   23.350306] x17: 0000000000000000 x16: 0000000000000000
[   23.351246] x15: 0000000000000000 x14: 00000000000000ef
[   23.351251] x13: 00000000000001b5 x12: 0000000000000002
[   23.351255] x11: 0000000000000001 x10: 0000000000000a30
[   23.352666] x9 : ffff800011bc3e80 x8 : ffff0000f6eae190
[   23.352672] x7 : 00000000ffffffff x6 : 000000003d5e8871
[   23.353615] x5 : 00ffffffffffffff x4 : ffff8000e6283000
[   23.353622] x3 : ca72b5330aec0004 x2 : ffff800011839988
[   23.354564] x1 : 0000000000000000 x0 : 0000000000000004
[   23.354571] Call trace:
[   23.355269]  flush_smp_call_function_queue+0x40/0x250
[   23.355277]  generic_smp_call_function_single_interrupt+0x14/0x20
[   23.356265]  handle_IPI+0x10c/0x3c8
[   23.356274]  gic_handle_irq+0x168/0x170
[   23.356927]  el1_irq+0xb8/0x180
[   23.356933]  arch_cpu_idle+0x14/0x20
[   23.356939]  do_idle+0x1fc/0x270
[   23.356946]  cpu_startup_entry+0x28/0x60
[   23.358179]  secondary_start_kernel+0x16c/0x180
[   23.358189] Code: d2800001 f8605855 8b150283 f9800071 (c85f7c60)
[   23.359142] ---[ end trace d7f9c88f93daf07b ]---
[   23.359147] Kernel panic - not syncing: Fatal exception in interrupt
[   23.360124] SMP: stopping secondary CPUs
[   23.360484] Kernel Offset: disabled
[   23.360489] CPU features: 0x0240022,2000200c
[   23.360491] Memory Limit: none
[   23.361461] Rebooting in 90 seconds..

 

[Kernel panic in 5.8.17 20.08.21]

@gprovost Gauthier, it's much better . With the 5.8.x kernel more often than not it would reboot to a kernel panic then a boot loop and would need to be physically re-powered to recover. With the 5.9.x kernel however I haven't experienced any such problems so far and have much more confidence in rebooting it.

[Kernel panic in 5.8.17 20.08.21]

Many thanks for your help there ShadowDance that's fixed it and I've now got ZFS running under OMV with the 5.9.10 kernel.

[Kernel panic in 5.8.17 20.08.21]

Thanks ShadowDance, yes I've pulled the zfs 0.8.5 branch from github and built the modules. Even with the dummy 0.8.4 package installed , installing zfsutils-linux uninstalls the zfs-dkms 0.8.5 package though

[Kernel panic in 5.8.17 20.08.21]

So good news / bad news. The good news is that the 5.9.x kernel does indeed seem to have resolved the bootime kernel panics I was experiencing and I now seem to be able to reboot the board consistently without being stuck in any of the previous kernel panic / retry boot loops. The bad news is that I can't get zfs working as 0.8.4 in the backports repo doesn't support kernels after 5.6 and 0.8.5 isn't compatible with the zfsutils-linux package!

[Kernel panic in 5.8.17 20.08.21]

SIGSEV , Gauthier ,

 

Thank you for the suggestion. I've had to power off the Helios64 for the moment but should be able to try the 5.9 kernel at the weekend. I'm using it with ZFS and OMV and I hope it will be more stable than all the builds of 5.8 that I've tried so far !

[Kernel panic in 5.8.17 20.08.21]

Additional crash

 

Spoiler

Starting kernel ...

[   24.230268] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   24.230776] Modules linked in: snd_soc_hdmi_codec r8152 snd_soc_rockchip_i2s snd_soc_core rockchip_vdec(C) hantro_vpu(C) snd_pcm_dmaengine pwm_fan leds_pwm gpio_charger rockchip_rga snd_pcm v4l2_h264 videobuf2_dma_contig rockchipdrm snd_timer v4l2_mem2mem videobuf2_dma_sg videobuf2_vmalloc snd panfrost dw_mipi_dsi videobuf2_memops videobuf2_v4l2 dw_hdmi soundcore gpu_sched videobuf2_common analogix_dp videodev drm_kms_helper fusb30x(C) cec mc rc_core sg drm drm_panel_orientation_quirks zfs(POE) gpio_beeper cpufreq_dt zunicode(POE) zavl(POE) icp(POE) zlua(POE) nfsd auth_rpcgss zcommon(POE) nfs_acl znvpair(POE) lockd grace spl(OE) lm75 sunrpc ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear md_mod realtek dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   24.237322] CPU: 5 PID: 0 Comm: swapper/5 Tainted: P         C OE     5.8.17-rockchip64 #20.08.21
[   24.238105] Hardware name: Helios64 (DT)
[   24.238459] pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)
[   24.238963] pc : sched_clock+0x3c/0x90
[   24.239301] lr : sched_clock_cpu+0x14/0x28
[   24.239664] sp : ffff800011ae3e60
[   24.239961] x29: 0000000000000100 x28: 0000000000000001
[   24.240434] x27: ffff0000f6ea6580 x26: ffff800011ae4000
[   24.240907] x25: ffff800011501d20 x24: 0000000000000168
[   24.241378] x23: ffff800011836f08 x22: 0000000000000004
[   24.241850] x21: ffff815c18a74108 x20: ffff800011836f00
[   24.242322] x19: ffff015c2a2ab010 x18: 0000000000000000
[   24.242793] x17: 00022f77f6ad6250 x16: ffff0000e0453fa8
[   24.243265] x15: 0000000000000006 x14: 00001401d89ead14
[   24.243736] x13: 0000000000000339 x12: 000000000000033f
[   24.244207] x11: 0000000000000001 x10: 0000000000000a20
[   24.244679] x9 : ffff800011babe70 x8 : ffff0000f6ea7000
[   24.245150] x7 : 00000000ffffffff x6 : 00000000388e7b38
[   24.245622] x5 : 00ffffffffffffff x4 : 003305860a2eef00
[   24.246093] x3 : 0000000000000000 x2 : 0000000000000080
[   24.246565] x1 : 0000000000000004 x0 : 0000000000000005
[   24.247036] Call trace:
[   24.247259]  sched_clock+0x3c/0x90
[   24.247570] Code: d50339bf 120002d5 9bb87eb5 8b1502f3 (f9400e60)
[   24.248120] ---[ end trace af056133bccc9297 ]---
[   24.248531] Kernel panic - not syncing: Fatal exception in interrupt
[   24.249096] SMP: stopping secondary CPUs
[   25.416116] SMP: failed to stop secondary CPUs 0-1,5
[   25.416556] Kernel Offset: disabled
[   25.416869] CPU features: 0x240022,2000600c
[   25.417241] Memory Limit: none
[   25.417527] Rebooting in 90 seconds..