Yes I did, and now I think it has nothing to do with the SSD. I installed the latest Armbian image from today. Apparently my Rockpi is trying to load files from my Fritzbox via TFTP.
I canceled the serial console and restarted via reset, and now the rockpi starts again without problems.
Armbian 20.11.6 Focal ttyS2
rockpi-4a login: [ 36.932811] watchdog: watchdog0: watchdog did not stop!
[ 37.227029] reboot: Restarting system
U-Boot TPL 2020.10-armbian (Jan 05 2021 - 03:54:57)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.10-armbian (Jan 05 2021 - 03:54:57 +0100)
Trying to boot from SPI
NOTICE: BL31: v1.3(debug):42583b6
NOTICE: BL31: Built : 07:55:13, Oct 15 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: If lpddr4 need support multi frequency,
INFO: please update loader!
INFO: Current ctl index[0] freq=400MHz
INFO: Current ctl index[1] freq=800MHz
INFO: plat_rockchip_pmu_init(1190): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.10-armbian (Jan 05 2021 - 03:54:57 +0100)
SoC: Rockchip rk3399
Reset cause: RST
Model: Radxa ROCK Pi 4B
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... SF: Detected XT25F32B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Radxa ROCK Pi 4B
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
Card did not respond to voltage select!
PCIe link training gen1 timeout!
Device 0: unknown device
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3c0000: USB EHCI 1.00
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
failed to find ep-gpios property
ethernet@fe300000 Waiting for PHY auto negotiation to complete........ done
Speed: 1000, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.11 (4 ms)
*** Warning: no boot file name; using 'C0A8010B.img'
Using ethernet@fe300000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.11
Filename 'C0A8010B.img'.
Load address: 0x800800
Loading: *T T T T T T T T T T
Retry count exceeded; starting again
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-5e-35-1a-eb-5a-8d
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.11
Filename 'pxelinux.cfg/01-5e-35-1a-eb-5a-8d'.
Load address: 0x600000
Loading: *T T T T T T T T T T
Retry count exceeded; starting again
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8010B
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.11
Filename 'pxelinux.cfg/C0A8010B'.
Load address: 0x600000
Loading: *T T T T T T T
Another reboot hangs on the kernel loading:
Last login: Mon Jan 25 23:33:11168.1.105 on pts/0
rock@rockpi-4a:~$ reboot
rock@rockpi-4a:~$ [ 148.654202] watchdog: watchdog0: watchdog did not stop!
[ 148.932579] reboot: Restarting system
U-Boot TPL 2020.10-armbian (Jan 05 2021 - 03:54:57)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.10-armbian (Jan 05 2021 - 03:54:57 +0100)
Trying to boot from SPI
NOTICE: BL31: v1.3(debug):42583b6
NOTICE: BL31: Built : 07:55:13, Oct 15 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: If lpddr4 need support multi frequency,
INFO: please update loader!
INFO: Current ctl index[0] freq=400MHz
INFO: Current ctl index[1] freq=800MHz
INFO: plat_rockchip_pmu_init(1190): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.10-armbian (Jan 05 2021 - 03:54:57 +0100)
SoC: Rockchip rk3399
Reset cause: RST
Model: Radxa ROCK Pi 4B
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... SF: Detected XT25F32B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Radxa ROCK Pi 4B
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
Card did not respond to voltage select!
Device 0: Vendor: 0x15b7 Rev: 211070WD Prod: 20427P462511
Type: Hard Disk
Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 2 ms (1.5 MiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
261 bytes read in 2 ms (127 KiB/s)
15790152 bytes read in 37 ms (407 MiB/s)
27507200 bytes read in 55 ms (477 MiB/s)
74439 bytes read in 3 ms (23.7 MiB/s)
267 bytes read in 2 ms (129.9 KiB/s)
Applying kernel provided DT overlay rockchip-pcie-gen2.dtbo
1314 bytes read in 2 ms (641.6 KiB/s)
Applying kernel provided DT overlay rockchip-spi-jedec-nor.dtbo
2698 bytes read in 2 ms (1.3 MiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Moving Image from 0x2080000 to 0x2200000, end=3cd0000
## Loading init Ramdisk from Legacy Image at 06000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 15790088 Bytes = 15.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f100d000, end f1f1c008 ... OK
Loading Device Tree to 00000000f0f92000, end 00000000f100cfff ... OK
Starting kernel ...
