Jump to content

Andre B

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by Andre B

  1. found it ! in case someone has the same board, this is the short pin
  2. doesn't seem to work, if i just break the emmc, will it boot from sdcard ?
  3. Hello, does anyone know the shortpin for this board ? its a fake r98mini tried to search in on internet but nobody discusing this board emmc is SanDisk SD1N7DU2-16G i'm trying to install archlinux for rock64 following this tutorial, now i cannot boot multitool, and usb doesn't detect the board in case the image is not show up, here's the original url https://pasteboard.co/tLDW0zAOzWMA.jpg https://pasteboard.co/0oMYdaPXA6fR.jpg
  4. Hi @Krotosz6 , i have the exact same problem, the multitool doesn't detect internal memory (i guess you mean the emmc ?), i tried your way without succeess, would you mind write a step by step instruction ? i can run armbian from sdcard but still the emmc isn't detected, i was assuming my emmc is dead, but reading your post gives me a new hope 🤣 i have different box, its h96max rk3318 with black pcb but the short pin looks similar, here's the pic : (the green line is the short pin i usually used, yellow line is your short pin from what i understand)
  5. @kruzer recently i did update to kernel 5.19.12 and everything just works, i mean turning on/off wifi led, usb led, lan led,etc . now i'm retrying with kernel 5.19.11 the only work is just the clock, what i miss ?
  6. Hi @kruzer would you mind assisting me to make the openvfd work ? i have the same chip, mine is black pcb but has same FD6551 chip.
  7. hi @jock, i noticed that i can only boot newer armbian images, older images with old method following bellow tutorial doesn't work anymore, i guess it because my broken device related to "idb", is there any other thing to "dd" to the sdcard to run older armbian from sdcard (especially with undetected emmc) ? perhaps idbloader ?
  8. @jock i think that too, but then i see this page http://www.hotmcu.com/wiki/Flashing_Firmware_Image_Files_Using_The_Rockchip_Tool#Preparing_IDB_failed which redirect me to this page http://www.hotmcu.com/wiki/Unbrick,_fix_NAND_on_the_marsboard my flashing error note is same as in that page (Prepare IDB Failed), and since i brick it while messing around with openwrt, perhaps it does corruot the bootloader. i tried to boot latest armbian from sdcard and it did boot, is there any way to fix the bootloader from the armbian without external linux host / desktop pc ? also that page noted about update.img with dead link, which i dont know what it is and since i dont have it, do you have it and care to share ?
  9. Hi, does anyone ever facing "IDB fail' while flashing ? my h96 max is currently bricked, previously i installed openwrt (with armbian uboot and kernel) on internal formatted as btrfs. Tried "Factory tool", "AndroidTool", "RKBatchTool", none worked, tried to boot openwrt again from sdcard (which previously done to install it on emmc) no longer booting, but multitool does boot, but doesn't detect emmc. is there any bash command that can i execute to fix that "IDB" problem @jock ? or is there any modified/improved version of multitool which include more functionality including btrfs filesystem management ?
  10. hi @lucky62, how do you get the values of these : dd if=uboot-rk3318.img of=/dev/<yoursdcard> seek=16384 dd if=trust.img of=/dev/<yoursdcard> seek=24576 i'm trying to boot other disk image and the partition size of BOOT and ROOTFS is different than your disk image
  11. does anyone using H96max rk 3318 ? want to know if there's an easy way to make the led (digital clock) turn on
  12. and also, is it ok to re-run rk3318-config and change some options/parameters after some days usage ? will it cause any problem/conflicts with system ?
  13. hi @jock, about rk3318-config , i'm using H96 Max rk3318 4/64 (Black PCB) 1. should i choose emmc DDR Mode or emmc HS200 Mode ? currently i don't choose any of these options since i'm not sure which one suits my device 2. there are LED Presets, but not H96Max, is one of them support my board ? currently i choose the last option (generic/unlisted) kindly let me know if you need a photo of my device board to help me choose the right options Thanks !
  14. hi @jock, i was hoping if you build an ubuntu focal image rather than ubuntu jammy, tested your ubuntu jammy it works including bluetooth and wifi but feels heavy in my H96 Max (black PCB), also tested balbes150's ubuntu focal it works smooth (feels lighter) but wifi and bluetooth doesn't work.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines