Jump to content

Andre B

Members
  • Posts

    14
  • Joined

  • Last visited

Posts posted by Andre B

  1. Hello, does anyone know the shortpin for this board ? its a fake r98mini

    tried to search in on internet but nobody discusing this board

     

    emmc is SanDisk SD1N7DU2-16G

     

    i'm trying to install archlinux for rock64 following this tutorial, now i cannot boot multitool, and usb doesn't detect the board

     

    0oMYdaPXA6fR.jpg?o=1tLDW0zAOzWMA.jpg?o=1

     

    in case the image is not show up, here's the original url 
    https://pasteboard.co/tLDW0zAOzWMA.jpg
    https://pasteboard.co/0oMYdaPXA6fR.jpg

  2. Quote
    On 9/7/2022 at 5:35 PM, Krotosz6 said:

    the Multitool then does not see the internal memory

     

    On 9/7/2022 at 5:35 PM, Krotosz6 said:

    In the system after the

    lsblk

    command it does not find the internal memory.

     

    On 9/8/2022 at 6:01 PM, Krotosz6 said:

    I disconnected the pins, but tried after turning on and booting from the card to connect the pins again and it showed eMMC. I cleaned it with the help of Multitool.

     

    Hi @Krotosz6 , i have the exact same problem, the multitool doesn't detect internal memory (i guess you mean the emmc ?), i tried your way without succeess, would you mind write a step by step instruction ?

    i can run armbian from sdcard but still the emmc isn't detected, i was assuming my emmc is dead, but reading your post gives me a new hope 🤣

     

    i have different box, its h96max rk3318 with black pcb but the short pin looks similar, here's the pic :

    xxxxxxxxxxxxxxx.thumb.jpg.14037f7120cce81ef49bf83011c81cf3.jpg

    (the green line is the short pin i usually used, yellow line is your short pin from what i understand)

     

  3. @jock i think that too, but then i see this page http://www.hotmcu.com/wiki/Flashing_Firmware_Image_Files_Using_The_Rockchip_Tool#Preparing_IDB_failed which redirect me to this page http://www.hotmcu.com/wiki/Unbrick,_fix_NAND_on_the_marsboard

     

    my flashing error note is same as in that page (Prepare IDB Failed), and since i brick it while messing around with openwrt, perhaps it does corruot the bootloader.

     

    i tried to boot latest armbian from sdcard and it did boot, is there any way to fix the bootloader from the armbian without external linux host / desktop pc ?

     

    also that page noted about update.img with dead link, which i dont know what it is and since i dont have it, do you have it and care to share ?

  4. Hi, does anyone ever facing "IDB fail' while flashing ?

    my h96 max is currently bricked, previously i installed openwrt (with armbian uboot and kernel) on internal formatted as btrfs.

     

    Tried "Factory tool", "AndroidTool", "RKBatchTool", none worked, tried to boot openwrt again from sdcard (which previously done to install it on emmc) no longer booting, but multitool does boot, but doesn't detect emmc.

     

    is there any bash command that can i execute to fix that "IDB" problem @jock ?

     

    or is there any modified/improved version of multitool which include more functionality including btrfs filesystem management ?

  5. hi @jock, about rk3318-config , i'm using H96 Max rk3318 4/64 (Black PCB)

    1. should i choose emmc DDR Mode or emmc HS200 Mode ? currently i don't choose any of these options since i'm not sure which one suits my device

    2. there are LED Presets, but not H96Max, is one of them support my board ? currently i choose the last option (generic/unlisted)

     

    kindly let me know if you need a photo of my device board to help me choose the right options

     

    Thanks !

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines