-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Community Map
Posts posted by Keno
-
-
The installation tutorial works. The camera for orangepi still is not detected though. it is SCI and not USB. (I am not paying 20$ for each one of the 10 camera systems I already have.
-
Looks like something changed and this is broken again I'll try and get it up and working this week
-
sudo wget https://github.com/k...armhf-2.1.0.deb dpkg -i download/v2.1.0/rpi3-machinery-kerberosio-armhf-2.1.0.deb
looks like it should be;
sudo wget https://github.com/k...armhf-2.1.0.deb dpkg -i rpi3-machinery-kerberosio-armhf-2.1.0.deb
we didnt change directories, please also use <> for code, as it will not shorten addresses.
I also made it even easier to get those files that are required by kerbereros
sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/raw/master/libavformat.so.56 sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libcontainers.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libmmal.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libmmal_components.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libmmal_core.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libmmal_util.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libmmal_vc_client.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libswscale.so.3 sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libvchiq_arm.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libvcos.so sudo wget https://github.com/Tom-Neverwinter/kerberosiolibs/blob/master/libvcsm.so mv libavformat.so.56 /etc/opt/kerberosio/config mv libcontainers.so /etc/opt/kerberosio/config mv libmmal.so /etc/opt/kerberosio/config mv libmmal_components.so /etc/opt/kerberosio/config mv libmmal_core.so /etc/opt/kerberosio/config mv libmmal_util.so /etc/opt/kerberosio/config mv libmmal_vc_client.so /etc/opt/kerberosio/config mv libswscale.so.3 /etc/opt/kerberosio/config mv libvchiq_arm.so /etc/opt/kerberosio/config mv libvcos.so /etc/opt/kerberosio/config mv libvcsm.so /etc/opt/kerberosio/config
Yes this code is ugly ^^^ (but I want to make 8+ of these things)
if I commit the config and camera.xml files and this will be even easier
Two small changes to setting up the board for ease of use and later on when it should record timestamps;
dpkg-reconfigure tzdata nmtui-connect SSID
finally installation just in case;
nand-sata-install
I attempted to;
sudo modprobe gc2035
sudo modprobe vfe_v4l2
to get the orangepi onboard camera to show up but it hangs so
lsusb only shows;
Bus 008 Device 002: ID 06a3:8021 Saitek PLC Eclipse II KeyboardBus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 006 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical MouseBus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubafter the first attempt I could no get the ngix server to even start and it seems it does need some of those files.attempt #2
THIS IS BROKEN, DEPRECIATED SCRIPT!;
curl -sL https://deb.nodesource.com/setup | sudo bash - sudo apt-get install git nginx php5-cli php5-fpm php5-gd php5-mcrypt php5-curl nodejs
The ability to reboot is also lost somewhere in here or I am running a different version causing conflicts.
If you could post a working image that would be much more useful. use win32 diskimager to clone the card
-
can you also show how to use this with the orangepi camera if possible?
-
There have been several disjointed tutorials on making a raspberrypi or orangepi into a surveillance camera. So I threw this together to maybe help someone out there with any issues.
I used the orangepipc+ but any orangepi board should work as long as it has the basics, internet connectivity, storage, and a camera. (I highly suggest heatsinks as well)
any feedback or enhancements to this tutorial are greatly appreciated.
------------------------------------------------------------------
ORANGEPI IPCAMERA
------------------------------------------------------------------
su root apt-get update apt-get upgrade apt-get install wget https://github.com/ccrisan/motioneye/wiki/precompiled/ffmpeg_3.1.1-1_armhf.deb dpkg -i ffmpeg_3.1.1-1_armhf.deb apt-get remove libavcodec-extra-56 libavformat56 libavresample2 libavutil54 apt-get install python-pip python-dev curl libssl-dev libcurl4-openssl-dev libjpeg-dev libx264-142 libavcodec56 libavformat56 libmysqlclient18 libswscale3 libpq5 wget https://github.com/Motion-Project/motion/releases/download/release-4.0.1/pi_jessie_motion_4.0.1-1_armhf.deb dpkg -i pi_jessie_motion_4.0.1-1_armhf.deb pip install motioneye mkdir -p /etc/motioneye cp /usr/local/share/motioneye/extra/motioneye.conf.sample /etc/motioneye/motioneye.conf mkdir -p /var/lib/motioneye cp /usr/local/share/motioneye/extra/motioneye.systemd-unit-local /etc/systemd/system/motioneye.service systemctl daemon-reload systemctl enable motioneye systemctl start motioneye sudo modprobe gc2035 sudo modprobe vfe_v4l2 systemctl restart motioneye
Accessing The Frontend
After having successfully followed the installation instructions, the motionEye server should be running on your system and listening on port 8765. Fire up your favorite web browser and visit the following URL (replacing [your_ip] with... well, your system's IP address):
http://[your_ip]:8765/
Use admin with empty password when prompted for credentials. For further details on how to configure motionEye, see Configuration.
------------------------------------------------------------------
FOR UPDATES;
------------------------------------------------------------------
pip install motioneye --upgrade
systemctl restart motioneye
sudo nano /etc/motioneye/motioneye.conf
ctrl+x then y (nano)
Modifiy the motion.config file to turnoff localhost;
stream_localhost off
change the port to 80 from 8765 if desired by;
systemctl enable motion
systemctl start motion
Tutorial sources;
https://github.com/ccrisan/motioneye/wiki/Install-On-Raspbian
http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=941
http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=1988 (some resources for motion)
http://www.cnx-software.com/2015/09/26/how-to-use-orange-pi-camera-in-linux-with-motion/(VERY OLD)
WIP tutorial, I want to add a version with facial recognition using openface and a version using ALPR (automatic license plate recognition, as the orangepi systems can have 2GB of ram)
Update 1 09/30/16;
seems there is a issue with motioneye and being unable to find the csi camera. I'm trying to find a work around, any help is appreciated.
Update 2 11/05/2016
Updated motioneye installation
added information on motion and basic setup (incomplete)
the editor seems to be breaking my wget addresses
I forgot to add the login information and frontend... *DOH*
-
You are correct. seems my 2A supply was dying, and outputting less amperage. changed it to a new one. The OPIPC+ I attempted to install to emmc fails to boot completely though.
-
I was testing the orangepi PC+ armbian build 5.20 (Armbian_5.20_Orangepipcplus_Debian_jessie_3.4.112_desktop)
when messing with it it seemed to have random reboots. I thought initially it was because it was lacking a heatsink or fan. So I added both and the issue persisted. Thinking maybe if I flashed to emmc it might resolve the issue it froze in emmc install and is effectively softbricked from what I can tell sadly. I also tested a second OPIPC+ but was unable to get it to boot. I tested with multiple new power cables as well.
[559] - GPIO Support for H2/H3 boards with a unified WiringPI library in a neat little package
in Advanced users - Development
Posted
How would I load a python library to communicate over spi with ws2812 leds?