wildcat_paris
-
Posts
498 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by wildcat_paris
-
-
I guess I'll keep my r1 to this kernel version (5.20), and as soon as I can I'll buy a real router.
Quite expensive : Turris Omnia for gigabits/s fiber internet.
for ADSL line, Lamobo-R1 is fine.
-
Can you please elaborate on this - bootable parts on eMMC are write-protected or hidden even if you put it into a card reader via adapter?
All I can find is this: http://odroid.com/dokuwiki/doku.php?id=en:emmc_recovery_xu3
write protected? yes and no, that is the purpose of the sd_fusing.sh script to allow boot0 to be rewritten.
1/ the eMMC2SD converter Hardkernel provides cannot see boot0/1/etc. internal partitions.
2/ Only a XU4 booted from SD card can do that & use sd_fusing.sh script
3/ if you don't overwrite boot0 of eMMC, you have a creepy uboot 2012.07 which will probably fail with single partion/vanilla kernel.
you cannot rely on Hardkernel for software, only Samsung Opensource Group does a great job.
-
Who said that? Any u-boot that supports reading from ext4 can be "convinced" to use single partition scheme, we just need to get enough logs and feedback to properly implement this.
Me.
I haven't seen uboot 2012.07 working with a single partition. I can be wrong, of course.
And anyway, without overwriting boot0 partition on eMMC with a proper uboot & blobs, I have tested, you are not gonna make it working.
In the best case, SD could work.
my next step would have been to test more fully how uboot 2016.09 & legacy kernel works (HDMI stuff & so on) but...
read your words. A project is to attract people, not repeal them.
-
Getting output from serial console would be ideal. And testing this image on SD to check if image is broken for both storage types or not.
There were some changes to board configurations, all newer images should have a single ext4 partition, so lack of FAT boot partition is normal.
@zador.blood.stain @mrneilypops
XU4 : uboot 2012.07 needs a dual boot partition. So uboot 2016.09 is needed as https://github.com/igorpecovnik/lib/pull/520
or a switch back to dual partitions for legacy kernel
(with uboot 2016.09, a writing/booting to a SD card is needed, then somewhere in the SD card there is sd_fusing.sh to write the boot loader in "boot0" partition)
@zador.blood.stain: better switch back to dual partition for legacy kernel on XU4 for the moment.
-
Please try rebuilding the kernel with updated config. Since kernel doesn't pick command line both from legacy and mainline u-boot, it must be a kernel issue.
@zador.blood.stain
You did good about the missing kernel options. it is running.
(Still need the update to rename or use xu4.dtb instead of xu3) but ok!!!!
the diff http://pastebin.com/zyanC78b
probably we need to unify boot.cmd now both legacy/vanilla can boot with single partition uboot 2016.09
edit:uboot 2016.09 & legacy kernel, the fan doesn't seem to workedit2:
so both legacy/vanilla boots with uboot 2016.09 with the diff (on SD, eMMC to be confirmed)
-
@zador.blood.stain
So it does boot fine? We can always switch DTB file name by checking /boot/.next, like in sunxi boot script.
yes it "kind of" boots, but the system cannot go any further with root=<null>
Sure the dtb file renaming is a "detail" I can handle.
-
Ideally I would like to see no more than something like this:
Board Branch Boot Network HDMI Install Date Performed by link
-----------------------------------------------------------------------------------------------------------------------------------------------------
Lamobo R1 Legacy ? ? ? ? ? ?
Lamobo R1 Vanilla ? ? ? ? ? ?
Odroid XU4 Legacy No - - SD 20161027 wildcat_paris http://pastebin.com/LA1sUa49
Odroid XU4 Vanilla Yes Yes console only SD 20161026 wildcat_paris ?
comments:
- I cannot find a proper/easy way to write a result table on the forum + impossible to use "tab" key to separate elements (only spaces)
=> is there an extension of the forum to add tables ???
I would propose to create a new "sticky" post:
- first message is the summary of all reports for a beta version (I would propose I do the updates here) from...
- testers can put their latest results in this thread and I would update the messages in the first post (as a summary)
- maybe you may reinstall wildcat_paris with proper rights to manage the "testing thread" (& available to help more in forum as previously)
-
-
@zador.blood.stain
I have tried uboot 2012.07 & boot.ini, uboot 2016.09 & boot.cmd (with and without UUID, removing ArmbianEnv.txt as well, putting /dev/mmcblk0p1 for root)
but I end always with
[ 7.905375] [c6] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 7.912127] [c6] Please append a correct "root=" boot option; here are the available partitions: [ 7.920918] [c6] b300 31276032 mmcblk0 driver: mmcblk [ 7.926612] [c6] b301 1214464 mmcblk0p1 65a81a70-01 [ 7.932308] [c6] 0800 488386576 sda driver: sd [ 7.937370] [c6] 0801 488383488 sda1 e72d222d-01 [ 7.942651] [c6] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
U-Boot 2016.09-armbian (Oct 27 2016 - 02:14:05 +0200) for ODROID-XU3 CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 1725 bytes read in 30 ms (55.7 KiB/s) ## Executing script at 50000000 ** File not found /boot/armbianEnv.txt ** ** File not found armbianEnv.txt ** 3436974 bytes read in 278 ms (11.8 MiB/s) 5124322 bytes read in 376 ms (13 MiB/s) 52006 bytes read in 39 ms (1.3 MiB/s) Kernel image @ 0x40800000 [ 0x000000 - 0x33a688 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5124258 Bytes = 4.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Ramdisk to 4fb1c000, end 4ffff0a2 ... OK Loading Device Tree to 4fb0c000, end 4fb1bb25 ... OK Starting kernel ... [ 0.000000] [c0] Booting Linux on physical CPU 0x100 [ 0.000000] [c0] Initializing cgroup subsys cpuset [ 0.000000] [c0] Initializing cgroup subsys cpu [ 0.000000] [c0] Initializing cgroup subsys cpuacct [ 0.000000] [c0] Linux version 3.10.104-odroidxu4 (root@server1604) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #3 SMP PREEMPT Thu Oct 27 02:15:34 CEST 2016 [ 0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422 [ 0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh [ 0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd [ 0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video [ 0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma [ 0.000000] [c0] cma: CMA: reserved 104 MiB at b9800000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b9400000 [ 0.000000] [c0] cma: CMA: reserved 8 MiB at b8c00000 [ 0.000000] [c0] cma: CMA: reserved 96 MiB at b2c00000 [ 0.000000] [c0] cma: CMA: reserved 16 MiB at b1c00000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1800000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1400000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1000000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b0c00000 [ 0.000000] [c0] cma: CMA: reserved 256 MiB at 4f000000 [ 0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] [c0] create_mapping_memory: section: 40000000 ~ 5f000000 [ 0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001) [ 0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1e98000 s14848 r8192 d13824 u36864 [ 0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523296 [ 0.000000] [c0] Kernel command line: console=ttySAC2,115200 vmalloc=512M [ 0.000000] [c0] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] [c0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] [c0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] [c0] allocated 4194304 bytes of page_cgroup [ 0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] [c0] Memory: 2048MB = 2048MB total [ 0.000000] [c0] Memory: 1548492k/1548492k available, 548660k reserved, 1339392K highmem [ 0.000000] [c0] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc090dfe4 (9240 kB) [ 0.000000] .init : 0xc090e000 - 0xc0978a00 ( 427 kB) [ 0.000000] .data : 0xc097a000 - 0xc09efd18 ( 472 kB) [ 0.000000] .bss : 0xc09efd18 - 0xc0e598e4 (4519 kB) [ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] [c0] Preemptible hierarchical RCU implementation. [ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] [c0] apll 800000000 [ 0.000000] [c0] bpll 825000000 [ 0.000000] [c0] cpll 666000000 [ 0.000000] [c0] dpll 600000000 [ 0.000000] [c0] epll 180633609 [ 0.000000] [c0] rpll 66000000 [ 0.000000] [c0] ipll 432000000 [ 0.000000] [c0] spll 800000000 [ 0.000000] [c0] dout_spll_ctrl_div2 400000000 [ 0.000000] [c0] vpll 400000000 [ 0.000000] [c0] mpll 532000000 [ 0.000000] [c0] Clock enables : TOP, MIF [ 0.000000] [c0] mmc0: dout_mmc0 666000000 [ 0.000000] [c0] mmc1: dout_mmc1 800000000 [ 0.000000] [c0] mmc2: dout_mmc2 666000000 [ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000 [ 0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000 [ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000 [ 0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000 [ 0.000000] [c0] mfc: aclk_333 400000000 [ 0.000000] [c0] Exynos5422: clock setup completed [ 0.000000] [c0] Exynos: pwm: clock setup completed [ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] [c0] Switching to timer-based delay loop [ 0.000000] [c0] EXYNOS5422 PMU Initialize [ 0.000000] [c0] Console: colour dummy device 80x30 [ 0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] [c0] ... MAX_LOCK_DEPTH: 48 [ 0.000000] [c0] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] [c0] ... CLASSHASH_SIZE: 4096 [ 0.000000] [c0] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] [c0] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] [c0] ... CHAINHASH_SIZE: 16384 [ 0.000000] [c0] memory used by lock dependency info: 3679 kB [ 0.000000] [c0] per task-struct memory footprint: 1152 bytes [ 0.000809] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.000836] [c0] pid_max: default: 32768 minimum: 301 [ 0.001278] [c0] Mount-cache hash table entries: 512 [ 0.036639] [c0] Initializing cgroup subsys memory [ 0.036732] [c0] Initializing cgroup subsys devices [ 0.036763] [c0] Initializing cgroup subsys freezer [ 0.036793] [c0] Initializing cgroup subsys blkio [ 0.036812] [c0] Initializing cgroup subsys perf_event [ 0.037033] [c0] CPU: Testing write buffer coherency: ok [ 0.037097] [c0] ftrace: allocating 23323 entries in 69 pages [ 0.086501] [c0] /cpus/cpu@0 missing clock-frequency property [ 0.086533] [c0] /cpus/cpu@1 missing clock-frequency property [ 0.086555] [c0] /cpus/cpu@2 missing clock-frequency property [ 0.086576] [c0] /cpus/cpu@3 missing clock-frequency property [ 0.086596] [c0] /cpus/cpu@4 missing clock-frequency property [ 0.086615] [c0] /cpus/cpu@5 missing clock-frequency property [ 0.086634] [c0] /cpus/cpu@6 missing clock-frequency property [ 0.086654] [c0] /cpus/cpu@7 missing clock-frequency property [ 0.086729] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.086909] [c0] Running under secure firmware. [ 0.086957] [c0] Setting up static identity map for 0xc0679848 - 0xc06798a0 [ 0.086985] [c0] Exynos-SnapShot: exynos_ss_init failed [ 0.107411] [c0] ftrace: Allocated trace_printk buffers [ 0.129374] [c1] CPU1: Booted secondary processor [ 0.129403] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.139311] [c2] CPU2: Booted secondary processor [ 0.139337] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.149303] [c3] CPU3: Booted secondary processor [ 0.149330] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.158295] [c4] CPU4: Booted secondary processor [ 0.159067] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.168307] [c5] CPU5: Booted secondary processor [ 0.169063] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.178329] [c6] CPU6: Booted secondary processor [ 0.179093] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.188309] [c7] CPU7: Booted secondary processor [ 0.189063] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.189327] [c0] Brought up 8 CPUs [ 0.189391] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.189406] [c0] CPU: All CPU(s) started in HYP mode. [ 0.189420] [c0] CPU: Virtualization extensions available. [ 0.191848] [c0] devtmpfs: initialized [ 0.229274] [c6] sched: registering cpufreq notifiers for scale-invariant loads [ 0.232026] [c6] pinctrl core: initialized pinctrl subsystem [ 0.233044] [c6] regulator-dummy: no parameters [ 0.242706] [c6] NET: Registered protocol family 16 [ 0.242933] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.281499] [c4] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered [ 0.281961] [c4] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered [ 0.289712] [c4] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.289730] [c4] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.291656] [c4] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.295920] [c4] PM DOMAIN: pd-cam has a new child pd-isp. [ 0.296785] [c4] PM DOMAIN: pd-gscl has a new child pd-cam. [ 0.296814] [c4] EXYNOS5: PM Domain Initialize [ 0.297104] [c4] pd-gscl - on [ 0.297278] [c4] pd-isp - on [ 0.297455] [c4] pd-mfc - on [ 0.297474] [c4] pd-g3d - on, always [ 0.297493] [c4] pd-disp1 - on, always [ 0.297670] [c4] pd-maudio - on [ 0.297688] [c4] pd-g2d - on, always [ 0.297864] [c4] pd-mscl - on [ 0.297885] [c4] pd-fsys - on, always [ 0.297905] [c4] pd-psgen - on, always [ 0.297924] [c4] pd-peric - on, always [ 0.297942] [c4] pd-wcore - on, always [ 0.298120] [c4] pd-cam - on [ 0.298146] [c4] EXYNOS: Initializing architecture [ 0.299685] [c4] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d [ 0.299707] [c4] exynos-sysmmu 10a60000.sysmmu: [OK] [ 0.300033] [c4] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d [ 0.300054] [c4] exynos-sysmmu 10a70000.sysmmu: [OK] [ 0.300386] [c4] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer [ 0.300407] [c4] exynos-sysmmu 14650000.sysmmu: [OK] [ 0.300714] [c4] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc [ 0.300735] [c4] exynos-sysmmu 13e80000.sysmmu: [OK] [ 0.301041] [c4] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc [ 0.301061] [c4] exynos-sysmmu 13e90000.sysmmu: [OK] [ 0.301376] [c4] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler [ 0.301396] [c4] exynos-sysmmu 12880000.sysmmu: [OK] [ 0.301720] [c4] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler [ 0.301740] [c4] exynos-sysmmu 12890000.sysmmu: [OK] [ 0.302060] [c4] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler [ 0.302080] [c4] exynos-sysmmu 128a0000.sysmmu: [OK] [ 0.302396] [c4] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler [ 0.302417] [c4] exynos-sysmmu 128c0000.sysmmu: [OK] [ 0.302731] [c4] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler [ 0.302751] [c4] exynos-sysmmu 128d0000.sysmmu: [OK] [ 0.303066] [c4] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler [ 0.303087] [c4] exynos-sysmmu 128e0000.sysmmu: [OK] [ 0.303394] [c4] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg [ 0.303414] [c4] exynos-sysmmu 11f10000.sysmmu: [OK] [ 0.303732] [c4] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg [ 0.303752] [c4] exynos-sysmmu 11f20000.sysmmu: [OK] [ 0.304051] [c4] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc [ 0.304071] [c4] exynos-sysmmu 11200000.sysmmu: [OK] [ 0.304399] [c4] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc [ 0.304420] [c4] exynos-sysmmu 11210000.sysmmu: [OK] [ 0.304766] [c4] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd [ 0.304786] [c4] exynos-sysmmu 14640000.sysmmu: [OK] [ 0.305124] [c4] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd [ 0.305144] [c4] exynos-sysmmu 14680000.sysmmu: [OK] [ 0.305573] [c4] CPU Info : Samsung Exynos5422 Soc is BIN1 [ 0.305589] [c4] Exynos5422 ASV : Use Fusing Speed Group 2 [ 0.305602] [c4] Exynos5422 ASV : invalid IDS value [ 0.305616] [c4] EXYNOS5422 ASV : IDS : 0 HPM : 0 [ 0.305660] [c4] VDD_ARM ASV group is 2 [ 0.305679] [c4] VDD_KFC ASV group is 2 [ 0.305695] [c4] VDD_INT ASV group is 2 [ 0.305712] [c4] VDD_MIF ASV group is 2 [ 0.305728] [c4] VDD_G3D ASV group is 2 [ 0.305743] [c4] VDD_ISP ASV group is 2 [ 0.318943] [c4] bio: create slab <bio-0> at 0 [ 0.320946] [c4] VUSB_BOOST_5V: 5000 mV [ 0.321505] [c4] MAIN_DC: no parameters [ 0.321965] [c4] hdmi-en: no parameters [ 0.323140] [c4] SCSI subsystem initialized [ 0.323536] [c4] usbcore: registered new interface driver usbfs [ 0.323643] [c4] usbcore: registered new interface driver hub [ 0.323870] [c4] usbcore: registered new device driver usb [ 0.329957] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV [ 0.331208] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV [ 0.332457] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV [ 0.333701] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV [ 0.335054] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV [ 0.336853] [c4] vddf_2v85: 3300 mV [ 0.338259] [c4] vdd_adc: 1800 mV [ 0.339705] [c4] vdd_pll: 1800 mV [ 0.341101] [c4] vdd_ldo6: 1000 mV [ 0.342499] [c4] vdd_ldo7: 1800 mV [ 0.343899] [c4] vdd_ldo8: 1800 mV [ 0.345401] [c4] vdd_ldo9: 3300 mV [ 0.346796] [c4] vdd_ldo10: 1800 mV [ 0.348197] [c4] vdd_ldo11: 1000 mV [ 0.349284] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV [ 0.350690] [c4] vdd_ldo15: 3300 mV [ 0.352105] [c4] vdd_eth: 3300 mV [ 0.353632] [c4] vdd_ldo18: 1850 mV [ 0.354723] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV [ 0.355879] [c4] vdd_mifs: 800 <--> 1100 mV at 1100 mV [ 0.357276] [c4] vdd_ldo26: 3000 mV [ 0.358379] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV [ 0.359780] [c4] vdd_ldo28: 3300 mV [ 0.361306] [c4] vdd_ldo30: 3300 mV [ 0.365096] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL) [ 0.365710] [c4] s3c-i2c 12c60000.i2c: slave address 0x00 [ 0.368370] [c5] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter [ 0.368631] [c5] s3c-i2c 12c70000.i2c: slave address 0x00 [ 0.368902] [c5] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter [ 0.369398] [c5] media: Linux media interface: v0.10 [ 0.369495] [c5] Linux video capture interface: v2.00 [ 0.371482] [c5] IOVMMU: Created debugfs entry at debugfs/iovmm [ 0.372064] [c5] Advanced Linux Sound Architecture Driver Initialized. [ 0.372686] [c5] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered [ 0.372724] [c5] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics [ 0.374756] [c5] Loading modules backported from Linux version next-20150222-0-g53e418f1 [ 0.374773] [c5] Backport integrated by backports.git backports-20150222-0-g2745ccd [ 0.376219] [c5] Switching to clocksource mct-frc [ 0.461604] [c5] NET: Registered protocol family 2 [ 0.463345] [c5] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.463722] [c5] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.464723] [c5] TCP: Hash tables configured (established 4096 bind 4096) [ 0.464831] [c5] TCP: reno registered [ 0.464858] [c5] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.465009] [c5] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.465934] [c5] NET: Registered protocol family 1 [ 0.479111] [c5] bounce pool size: 64 pages [ 0.487454] [c5] VFS: Disk quotas dquot_6.5.2 [ 0.487803] [c5] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.490948] [c5] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.491851] [c5] msgmni has been set to 920 [ 0.496130] [c5] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.496173] [c5] io scheduler noop registered [ 0.496190] [c5] io scheduler deadline registered [ 0.496457] [c5] io scheduler cfq registered (default) [ 0.507862] [c5] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.507884] [c5] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.513691] [c5] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.513713] [c5] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.519486] [c5] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.519507] [c5] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.522605] [c5] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.522626] [c5] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.662765] [c5] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.665514] [c5] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10 [ 0.666314] [c5] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10 [ 0.667095] [c5] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10 [ 2.182019] [c5] console [ttySAC2] enabled [ 2.186760] [c5] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10 [ 2.197262] [c5] [drm] Initialized drm 1.1.0 20060810 [ 2.208294] [c5] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.213940] [c5] [drm] No driver support for vblank timestamp query. [ 2.220256] [c5] exynos-mixer 14450000.mixer: probe start [ 2.225876] [c5] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.233822] [c5] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.241272] [c5] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.248074] [c5] mali 11800000.mali: Continuing without Mali clock control [ 2.257894] [c5] hrtimer: interrupt took 111500 ns [ 2.261624] [c5] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0 [ 2.272048] mali 11800000.mali: Probed as mali0 [ 2.282716] [c5] loop: module loaded [ 2.285954] [c5] tun: Universal TUN/TAP device driver, 1.6 [ 2.290335] [c5] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.705510] [c5] dwc3 12400000.dwc3: dwc3_otg address space is not supported [ 2.712184] [c5] dwc3 12400000.dwc3: Binding gadget dwc3-gadget [ 2.717795] [c6] dwc3 12400000.dwc3: Turn on host [ 2.922815] [c6] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.928347] [c6] ehci-s5p: EHCI s5p driver [ 2.932993] [c6] s5p-ehci 12110000.usb: EHCI Host Controller [ 2.938205] [c6] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.946073] [c6] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000 [ 2.961452] [c6] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.967645] [c6] hub 1-0:1.0: USB hub found [ 2.970385] [c6] hub 1-0:1.0: 3 ports detected [ 2.976182] [c6] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.981836] [c6] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller [ 2.987964] [c6] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.996052] [c6] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000 [ 3.061670] [c6] hub 2-0:1.0: USB hub found [ 3.064404] [c6] hub 2-0:1.0: 3 ports detected [ 3.070376] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.075097] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 3.083199] [c6] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000 [ 3.090595] [c6] hub 3-0:1.0: USB hub found [ 3.093579] [c6] hub 3-0:1.0: 1 port detected [ 3.098418] [c6] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.103789] [c6] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 3.113050] [c6] hub 4-0:1.0: USB hub found [ 3.115978] [c6] hub 4-0:1.0: 1 port detected [ 3.121000] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 3.126276] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5 [ 3.134554] [c6] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000 [ 3.141934] [c6] hub 5-0:1.0: USB hub found [ 3.144872] [c6] hub 5-0:1.0: 1 port detected [ 3.149785] [c6] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 3.155154] [c6] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6 [ 3.164406] [c6] hub 6-0:1.0: USB hub found [ 3.167516] [c6] hub 6-0:1.0: 1 port detected [ 3.172614] [c6] usbcore: registered new interface driver usb-storage [ 3.178367] [c6] usbcore: registered new interface driver usbserial [ 3.184451] [c6] usbcore: registered new interface driver usbserial_generic [ 3.191426] [c6] usbserial: USB Serial support registered for generic [ 3.198610] [c6] exynos-usb-switch usb-switch.10: host detect gpio is not available [ 3.205387] [c6] exynos-usb-switch usb-switch.10: device detect gpio is not available [ 3.213192] [c6] exynos-usb-switch usb-switch.10: vbus control gpio is not available [ 3.221044] [c6] exynos-usb-switch usb-switch.10: failed to configure pins [ 3.227942] [c6] exynos-usb-switch usb-switch.10: udc device is not available [ 3.234866] [c6] exynos-usb-switch usb-switch.10: Disable device detect IRQ [ 3.266465] [c6] usb cable = 1 [ 3.269005] [c6] mousedev: PS/2 mouse device common for all mice [ 3.277682] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR [ 3.282728] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL [ 3.289046] [c6] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7) [ 3.297944] [c6] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0 [ 3.303905] [c6] i2c /dev entries driver [ 3.308970] [c6] IR NEC protocol handler initialized [ 3.312510] [c6] IR RC5(x) protocol handler initialized [ 3.317764] [c6] IR RC6 protocol handler initialized [ 3.322664] [c6] IR JVC protocol handler initialized [ 3.327598] [c6] IR Sony protocol handler initialized [ 3.332634] [c6] IR RC5 (streamzap) protocol handler initialized [ 3.338618] [c6] IR SANYO protocol handler initialized [ 3.343736] [c6] IR MCE Keyboard/mouse protocol handler initialized [ 3.350549] [c6] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered [ 3.356351] [c6] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted! [ 3.363905] [c6] s5p-mfc 11000000.mfc: decoder registered as /dev/video6 [ 3.370103] [c6] s5p-mfc 11000000.mfc: encoder registered as /dev/video7 [ 3.376821] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000. [ 3.385064] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000. [ 3.393643] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000. [ 3.402238] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000. [ 3.410827] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000. [ 3.419410] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000. [ 3.428961] [c6] ion_cma ion_mfc_nfw: Alread isolated! [ 3.433440] [c6] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics [ 3.440814] [c6] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec [ 3.447134] s5p-tvout-cec 101b0000.cec: probe successful [ 3.453854] [c6] TRIMINFO[0] = 0x80672d [ 3.456219] [c6] TMU_CONTROL[0] = 0x10609803 [ 3.460603] [c6] CURRENT_TEMP[0] = 0x35 [ 3.464325] [c6] THRESHOLD_TEMP_RISE[0] = 0x827d7873 [ 3.469273] [c6] THRESHOLD_TEMP_FALL[0] = 0x807b7671 [ 3.474217] [c6] INTEN[0] = 0x11111111 [ 3.477948] [c6] INTCLEAR[0] = 0x0 [ 3.481326] [c6] TRIMINFO[1] = 0x806830 [ 3.485151] [c6] TMU_CONTROL[1] = 0x10609803 [ 3.489401] [c6] CURRENT_TEMP[1] = 0x36 [ 3.493214] [c6] THRESHOLD_TEMP_RISE[1] = 0x85807b76 [ 3.498164] [c6] THRESHOLD_TEMP_FALL[1] = 0x837e7974 [ 3.503136] [c6] INTEN[1] = 0x11111111 [ 3.506842] [c6] INTCLEAR[1] = 0x0 [ 3.510218] [c6] TRIMINFO[2] = 0x806d35 [ 3.514044] [c6] TMU_CONTROL[2] = 0x10609803 [ 3.518295] [c6] CURRENT_TEMP[2] = 0x3b [ 3.522108] [c6] THRESHOLD_TEMP_RISE[2] = 0x85807b76 [ 3.527059] [c6] THRESHOLD_TEMP_FALL[2] = 0x837e7974 [ 3.532004] [c6] INTEN[2] = 0x11111111 [ 3.535696] [c6] INTCLEAR[2] = 0x0 [ 3.539150] [c6] TRIMINFO[3] = 0x806a30 [ 3.542936] [c6] TMU_CONTROL[3] = 0x10609803 [ 3.547188] [c6] CURRENT_TEMP[3] = 0x3b [ 3.550967] [c6] THRESHOLD_TEMP_RISE[3] = 0x89847f7a [ 3.555946] [c6] THRESHOLD_TEMP_FALL[3] = 0x87827d78 [ 3.560897] [c6] INTEN[3] = 0x11111111 [ 3.564627] [c6] INTCLEAR[3] = 0x0 [ 3.568042] [c6] TRIMINFO[4] = 0x806e34 [ 3.571831] [c6] TMU_CONTROL[4] = 0x10609803 [ 3.576043] [c6] CURRENT_TEMP[4] = 0x39 [ 3.579899] [c6] THRESHOLD_TEMP_RISE[4] = 0x8a85807b [ 3.584844] [c6] THRESHOLD_TEMP_FALL[4] = 0x88837e79 [ 3.589790] [c6] INTEN[4] = 0x11111111 [ 3.593521] [c6] INTCLEAR[4] = 0x0 [ 3.598143] [c6] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 3.606703] [c6] cpuidle: using governor ladder [ 3.611944] [c6] cpuidle: using governor menu [ 3.614885] [c6] Synopsys Designware Multimedia Card Interface Driver [ 3.622391] [c6] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4 [ 3.631320] [c6] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered. [ 3.641169] [c6] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller. [ 3.648195] [c6] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030 [ 3.654346] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a [ 3.660402] [c6] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo [ 3.661558] [c7] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 3.696463] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 3.716678] [c6] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized [ 3.722023] [c6] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3 [ 3.731535] [c6] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller. [ 3.738436] [c6] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030 [ 3.744589] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a [ 3.750647] [c6] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo [ 3.756501] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35) [ 3.770756] [c6] mmc1: vmmc regulator found [ 3.774666] [c6] mmc1: vqmmc regulator found [ 3.790478] [c7] hub 3-1:1.0: USB hub found [ 3.796468] [c6] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 3.803473] [c7] hub 3-1:1.0: 2 ports detected [ 3.811460] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53) [ 3.821618] [c6] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized [ 3.827502] [c6] leds-gpio leds.15: pins are not configured from the driver [ 3.834724] [c6] ledtrig-cpu: registered to indicate activity on CPUs [ 3.839784] [c6] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics [ 3.847054] [c6] ACE: ecb-aes-s5p-ace [ 3.850134] [c6] ACE: cbc-aes-s5p-ace [ 3.853820] [c6] ACE: ctr-aes-s5p-ace [ 3.857446] [c6] ACE: xts-aes-s5p-ace [ 3.861062] [c6] ACE: sha1-s5p-ace [ 3.864488] [c6] ACE: sha256-s5p-ace [ 3.867756] [c6] ACE driver is initialized [ 3.872123] [c6] hidraw: raw HID events driver (C) Jiri Kosina [ 3.878061] [c6] usbcore: registered new interface driver usbhid [ 3.881476] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105) [ 3.893531] [c6] usbhid: USB HID core driver [ 3.898649] [c6] exynos-adc 12d10000.adc: operating without regulator vdd[-19] [ 3.905591] [c6] exynos-adc 12d10000.adc: Probed successfully driver. [ 3.912960] [c6] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API [ 3.919324] [c6] pwm-samsung: tin parent at 66600000 [ 3.928352] [c6] lpass_register_subip: i2s(cdb3c010) registered [ 3.981806] [c7] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.002962] [c7] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 4.012317] [c5] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209) [ 4.021066] [c5] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0) [ 4.025278] [c7] hub 4-1:1.0: USB hub found [ 4.025684] [c7] hub 4-1:1.0: 2 ports detected [ 4.251522] [c4] usb 2-1: new full-speed USB device number 2 using exynos-ohci [ 4.291419] [c6] dwmmc_exynos 12220000.dwmmc2: data timeout error [ 4.296125] [c5] mmc_host mmc1: Tuning error: cmd.error:-110, data.error:-110 [ 4.303231] [c5] dwmmc_exynos 12220000.dwmmc2: divratio: 3 map: 0x 00007fff [ 4.310139] [c5] dwmmc_exynos 12220000.dwmmc2: sample_good: 0x 7fff best_sample: 0x 06 [ 4.318066] [c5] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 4.325973] [c5] mmcblk0: mmc1:59b4 29.8 GiB [ 4.332693] [c5] mmcblk0: p1 [ 4.351452] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 4.411473] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35) [ 4.473618] [c4] input: Logitech USB Receiver as /devices/12120000.usb/usb2/2-1/2-1:1.0/input/input0 [ 4.476551] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53) [ 4.492475] [c4] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-12120000.usb-1/input0 [ 4.511462] [c4] input: Logitech USB Receiver as /devices/12120000.usb/usb2/2-1/2-1:1.1/input/input1 [ 4.521200] [c4] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-12120000.usb-1/input1 [ 4.541486] [c5] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105) [ 4.602076] [c4] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd [ 4.648500] [c4] hub 3-1.1:1.0: USB hub found [ 4.651700] [c4] hub 3-1.1:1.0: 4 ports detected [ 4.771758] [c4] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.791932] [c4] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 4.882955] [c4] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd [ 4.931435] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0) [ 4.931435] : CTL 0x00000089 [ 4.931435] : FIFO_CTL 0x00200203 [ 4.931435] : TRAILING_CTL 0x0000000f [ 4.931435] : CLK_CTL 0x00000000 [ 4.931435] : CLK_SLOT 0x00000000 [ 4.931435] : INT_EN 0x00000000 [ 4.931435] : INT_STAT 0x00000000 [ 4.931435] : ERR_STAT 0x00000000 [ 4.931435] : FIFO_STAT 0x01000002 [ 4.931435] : TXDATA 0xdeadbeaf [ 4.931435] : RXDATA 0x00000000 [ 4.931435] : CONF 0xb00300ff [ 4.931435] : AUTO_CONF 0x00020002 [ 4.931435] : TIMEOUT 0x000000ff [ 4.931435] : MANUAL_CMD 0x00000000 [ 4.931435] : TRANS_STAT 0x00000000 [ 4.931435] : TIMING_HS1 0x4b4b4b00 [ 4.931435] : TIMING_HS2 0x25004b4b [ 4.931435] : TIMING_HS3 0x00000096 [ 4.931435] : TIMING_FS1 0x4b4b4b00 [ 4.931435] : TIMING_FS2 0x25004b4b [ 4.931435] : TIMING_FS3 0x00000096 [ 4.931435] : TIMING_SLA 0x00000025 [ 5.020837] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout [ 5.133110] [c4] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 5.144564] [c4] hub 4-1.1:1.0: USB hub found [ 5.147688] [c4] hub 4-1.1:1.0: 4 ports detected [ 5.222979] [c4] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd [ 5.242787] [c4] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 5.254867] [c4] usb-storage 4-1.2:1.0: USB Mass Storage device detected [ 5.260789] [c5] scsi0 : usb-storage 4-1.2:1.0 [ 5.346694] [c5] usb 3-1.1.1: new full-speed USB device number 4 using xhci-hcd [ 6.021432] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0) [ 6.021432] : CTL 0x00000089 [ 6.021432] : FIFO_CTL 0x00200203 [ 6.021432] : TRAILING_CTL 0x0000000f [ 6.021432] : CLK_CTL 0x00000000 [ 6.021432] : CLK_SLOT 0x00000000 [ 6.021432] : INT_EN 0x00000000 [ 6.021432] : INT_STAT 0x00000000 [ 6.021432] : ERR_STAT 0x00000000 [ 6.021432] : FIFO_STAT 0x01000002 [ 6.021432] : TXDATA 0xdeadbeaf [ 6.021432] : RXDATA 0x00000000 [ 6.021432] : CONF 0xb00300ff [ 6.021432] : AUTO_CONF 0x00020002 [ 6.021432] : TIMEOUT 0x000000ff [ 6.021432] : MANUAL_CMD 0x00000000 [ 6.021432] : TRANS_STAT 0x00000000 [ 6.021432] : TIMING_HS1 0x4b4b4b00 [ 6.021432] : TIMING_HS2 0x25004b4b [ 6.021432] : TIMING_HS3 0x00000096 [ 6.021432] : TIMING_FS1 0x4b4b4b00 [ 6.021432] : TIMING_FS2 0x25004b4b [ 6.021432] : TIMING_FS3 0x00000096 [ 6.021432] : TIMING_SLA 0x00000025 [ 6.110858] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout [ 6.116294] [c6] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed [ 6.122377] [c6] max98090 1-0010: Failed to reset codec: -5 [ 6.127908] [c6] max98090 1-0010: Failed to device reset : -5 [ 6.133632] [c6] max98090 1-0010: ASoC: failed to probe CODEC -5 [ 6.139841] [c6] odroid-audio sound.13: ASoC: failed to instantiate card -5 [ 6.146894] [c6] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5 [ 6.155259] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.162407] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.170535] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.178627] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.186755] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.194822] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.203771] [c6] odroid-audio sound.13: dummy-aif1 <-> samsung-i2s-sec mapping ok [ 6.211575] [c6] odroid-audio sound.13: dummy-aif2 <-> 3830000.i2s mapping ok [ 6.220930] [c6] Netfilter messages via NETLINK v0.30. [ 6.225361] [c6] arp_tables: (C) 2002 David S. Miller [ 6.229855] [c6] TCP: cubic registered [ 6.233408] [c6] Initializing XFRM netlink socket [ 6.238859] [c6] NET: Registered protocol family 10 [ 6.244634] [c6] mip6: Mobile IPv6 [ 6.246616] [c6] sit: IPv6 over IPv4 tunneling driver [ 6.253434] [c6] NET: Registered protocol family 17 [ 6.256949] [c6] NET: Registered protocol family 15 [ 6.261782] [c6] NET: Registered protocol family 35 [ 6.263033] [c5] scsi 0:0:0:0: Direct-Access ST950032 5AS 1003 PQ: 0 ANSI: 6 [ 6.265551] [c5] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.266007] [c4] sd 0:0:0:0: [sda] 976773152 512-byte logical blocks: (500 GB/465 GiB) [ 6.267681] [c4] sd 0:0:0:0: [sda] Write Protect is off [ 6.269383] [c4] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 6.303064] [c6] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 6.306709] [c4] sda: sda1 [ 6.311349] [c4] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.318810] [c6] Registering SWP/SWPB emulation handler [ 6.323956] [c6] SRAM ASV group [2] : MIF(950000), G3D(975000) [ 6.336038] [c6] registered taskstats version 1 [ 6.339340] [c6] hdmi-en: disabling [ 6.342636] [c6] MAIN_DC: disabling [ 6.346039] [c6] regulator-dummy: disabling [ 6.351895] [c6] input: gpio_keys.7 as /devices/gpio_keys.7/input/input2 [ 6.357825] [c6] CPUFREQ of CA7 L0 : 1300000 uV [ 6.361818] [c6] CPUFREQ of CA7 L0 : ABB 8 [ 6.365885] [c6] CPUFREQ of CA7 L1 : 1300000 uV [ 6.370556] [c6] CPUFREQ of CA7 L1 : ABB 2 [ 6.374708] [c6] CPUFREQ of CA7 L2 : 1250000 uV [ 6.379319] [c6] CPUFREQ of CA7 L2 : ABB 2 [ 6.383474] [c6] CPUFREQ of CA7 L3 : 1200000 uV [ 6.388070] [c6] CPUFREQ of CA7 L3 : ABB 2 [ 6.392235] [c6] CPUFREQ of CA7 L4 : 1150000 uV [ 6.396835] [c6] CPUFREQ of CA7 L4 : ABB 2 [ 6.400939] [c6] CPUFREQ of CA7 L5 : 1112500 uV [ 6.405598] [c6] CPUFREQ of CA7 L5 : ABB 2 [ 6.409763] [c6] CPUFREQ of CA7 L6 : 1075000 uV [ 6.414362] [c6] CPUFREQ of CA7 L6 : ABB 2 [ 6.418526] [c6] CPUFREQ of CA7 L7 : 1037500 uV [ 6.423126] [c6] CPUFREQ of CA7 L7 : ABB 2 [ 6.427289] [c6] CPUFREQ of CA7 L8 : 1000000 uV [ 6.431888] [c6] CPUFREQ of CA7 L8 : ABB 255 [ 6.436166] [c6] CPUFREQ of CA7 L9 : 962500 uV [ 6.440738] [c6] CPUFREQ of CA7 L9 : ABB 255 [ 6.445076] [c6] CPUFREQ of CA7 L10 : 925000 uV [ 6.449676] [c6] CPUFREQ of CA7 L10 : ABB 255 [ 6.454101] [c6] CPUFREQ of CA7 L11 : 900000 uV [ 6.458754] [c6] CPUFREQ of CA7 L11 : ABB 255 [ 6.463127] [c6] CPUFREQ of CA7 L12 : 900000 uV [ 6.467723] [c6] CPUFREQ of CA7 L12 : ABB 255 [ 6.472148] [c6] CPUFREQ of CA7 L13 : 900000 uV [ 6.476748] [c6] CPUFREQ of CA7 L13 : ABB 255 [ 6.481111] [c6] CPUFREQ of CA7 L14 : 900000 uV [ 6.485771] [c6] CPUFREQ of CA7 L14 : ABB 255 [ 6.490496] [c6] kfc clock[800000], mx_mspll clock[666000] [ 6.495674] [c6] [SET_EMA_TEST] volt : 887500 value : 0x44 [ 6.501216] [c6] [SET_EMA_TEST] volt : 937500 value : 0x44 [ 6.506770] [c6] [SET_EMA_TEST] volt : 1032500 value : 0x33 [ 6.512408] [c6] [SET_EMA_TEST] volt : 1142500 value : 0x11 [ 6.518049] [c6] [SET_EMA_TEST] volt : 1167500 value : 0x11 [ 6.523688] [c6] CPUFREQ of CA15 L0 : 1362500 uV [ 6.528286] [c6] CPUFREQ of CA15 L0 : ABB 8 [ 6.532538] [c6] CPUFREQ of CA15 L1 : 1362500 uV [ 6.537137] [c6] CPUFREQ of CA15 L1 : ABB 8 [ 6.541327] [c6] CPUFREQ of CA15 L2 : 1362500 uV [ 6.545986] [c6] CPUFREQ of CA15 L2 : ABB 8 [ 6.550247] [c6] CPUFREQ of CA15 L3 : 1350000 uV [ 6.554837] [c6] CPUFREQ of CA15 L3 : ABB 255 [ 6.559262] [c6] CPUFREQ of CA15 L4 : 1300000 uV [ 6.563860] [c6] CPUFREQ of CA15 L4 : ABB 255 [ 6.568285] [c6] CPUFREQ of CA15 L5 : 1225000 uV [ 6.572881] [c6] CPUFREQ of CA15 L5 : ABB 255 [ 6.577309] [c6] CPUFREQ of CA15 L6 : 1175000 uV [ 6.581908] [c6] CPUFREQ of CA15 L6 : ABB 255 [ 6.586273] [c6] CPUFREQ of CA15 L7 : 1137500 uV [ 6.590932] [c6] CPUFREQ of CA15 L7 : ABB 255 [ 6.595356] [c6] CPUFREQ of CA15 L8 : 1100000 uV [ 6.599955] [c6] CPUFREQ of CA15 L8 : ABB 255 [ 6.604380] [c6] CPUFREQ of CA15 L9 : 1062500 uV [ 6.608978] [c6] CPUFREQ of CA15 L9 : ABB 255 [ 6.613405] [c6] CPUFREQ of CA15 L10 : 1037500 uV [ 6.618098] [c6] CPUFREQ of CA15 L10 : ABB 255 [ 6.622602] [c6] CPUFREQ of CA15 L11 : 1025000 uV [ 6.627292] [c6] CPUFREQ of CA15 L11 : ABB 255 [ 6.631799] [c6] CPUFREQ of CA15 L12 : 1000000 uV [ 6.636485] [c6] CPUFREQ of CA15 L12 : ABB 255 [ 6.640936] [c6] CPUFREQ of CA15 L13 : 975000 uV [ 6.645595] [c6] CPUFREQ of CA15 L13 : ABB 255 [ 6.650106] [c6] CPUFREQ of CA15 L14 : 950000 uV [ 6.654706] [c6] CPUFREQ of CA15 L14 : ABB 255 [ 6.659217] [c6] CPUFREQ of CA15 L15 : 925000 uV [ 6.663816] [c6] CPUFREQ of CA15 L15 : ABB 255 [ 6.668327] [c6] CPUFREQ of CA15 L16 : 900000 uV [ 6.672922] [c6] CPUFREQ of CA15 L16 : ABB 255 [ 6.677439] [c6] CPUFREQ of CA15 L17 : 900000 uV [ 6.682036] [c6] CPUFREQ of CA15 L17 : ABB 255 [ 6.686548] [c6] CPUFREQ of CA15 L18 : 900000 uV [ 6.691087] [c6] CPUFREQ of CA15 L18 : ABB 255 [ 6.695659] [c6] CPUFREQ of CA15 L19 : 900000 uV [ 6.700257] [c6] CPUFREQ of CA15 L19 : ABB 255 [ 6.704769] [c6] CPUFREQ of CA15 L20 : 900000 uV [ 6.709368] [c6] CPUFREQ of CA15 L20 : ABB 255 [ 6.713880] [c6] CPUFREQ of CA15 L21 : 900000 uV [ 6.718479] [c6] CPUFREQ of CA15 L21 : ABB 255 [ 6.722991] [c6] CPUFREQ of CA15 L22 : 900000 uV [ 6.727589] [c6] CPUFREQ of CA15 L22 : ABB 255 [ 6.732442] [c6] eagle clock[800000], mpll clock[800000] [ 6.741742] [c6] Exynos: Kernel Thermal management registered [ 6.746515] [c6] ### dt-test ### No testcase data in device tree; not running tests [ 6.789811] [c6] MIF 825000Khz ASV is 975000uV [ 6.792876] [c6] DEVFREQ(MIF) : 825000Khz, ABB 14 [ 6.797495] [c6] MIF 728000Khz ASV is 937500uV [ 6.801920] [c6] DEVFREQ(MIF) : 728000Khz, ABB 14 [ 6.806603] [c6] MIF 633000Khz ASV is 900000uV [ 6.810997] [c6] DEVFREQ(MIF) : 633000Khz, ABB 14 [ 6.815714] [c6] MIF 543000Khz ASV is 875000uV [ 6.820140] [c6] DEVFREQ(MIF) : 543000Khz, ABB 14 [ 6.824823] [c6] MIF 413000Khz ASV is 812500uV [ 6.829251] [c6] DEVFREQ(MIF) : 413000Khz, ABB 14 [ 6.833934] [c6] MIF 275000Khz ASV is 787500uV [ 6.838361] [c6] DEVFREQ(MIF) : 275000Khz, ABB 14 [ 6.843044] [c6] MIF 206000Khz ASV is 787500uV [ 6.847473] [c6] DEVFREQ(MIF) : 206000Khz, ABB 14 [ 6.852156] [c6] MIF 165000Khz ASV is 787500uV [ 6.856582] [c6] DEVFREQ(MIF) : 165000Khz, ABB 14 [ 6.861233] [c6] MIF 138000Khz ASV is 787500uV [ 6.865692] [c6] DEVFREQ(MIF) : 138000Khz, ABB 14 [ 6.871701] [c6] MIF: set ASV freq 825000, voltage 975000 [ 6.876282] [c6] INT 600000Khz ASV is 962500uV [ 6.880196] [c6] DEVFREQ(INT) : 600000Khz, ABB 255 [ 7.886388] [c6] PM DOMAIN: Power off unused power domains. [ 7.890953] [c6] ALSA device list: [ 7.893906] [c6] pd-gscl: Power-off latency exceeded, new value 2973792 ns [ 7.900754] [c6] #0: odroid-audio [ 7.905375] [c6] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 7.912127] [c6] Please append a correct "root=" boot option; here are the available partitions: [ 7.920918] [c6] b300 31276032 mmcblk0 driver: mmcblk [ 7.926612] [c6] b301 1214464 mmcblk0p1 65a81a70-01 [ 7.932308] [c6] 0800 488386576 sda driver: sd [ 7.937370] [c6] 0801 488383488 sda1 e72d222d-01 [ 7.942651] [c6] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 7.951306] [c6] CPU: 6 PID: 1 Comm: swapper/0 Not tainted 3.10.104-odroidxu4 #3
-
@zador.blood.stain
logs for legacy XU4
U-Boot 2012.07 (Oct 27 2016 - 00:04:13) for Exynos5422 CPU: Exynos5422 Rev0.1 [Samsung SOC on SMP Platform Base on ARM CortexA7] APLL = 800MHz, KPLL = 800MHz MPLL = 532MHz, BPLL = 825MHz Board: HardKernel ODROID DRAM: 2 GiB WARNING: Caches not enabled TrustZone Enabled BSP BL1 version: â/âââ VDD_KFC: 0x44 LDO19: 0xf2 Checking Boot Mode ... SDMMC MMC: S5P_MSHC2: 0, S5P_MSHC0: 1 MMC Device 0: 29.8 GiB MMC Device 1: [ERROR] response error : 00000006 cmd 8 [ERROR] response error : 00000006 cmd 55 [ERROR] response error : 00000006 cmd 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 there are pending interrupts 0x00000001 ** Unable to use mmc 0:1 for fatload ** Loading file "/boot/boot.ini" from mmc device 0:1 xxa1 9509 bytes read Loading boot.ini from ext4 0:1 Find boot.ini file from FAT/Ext4 Area!! boot.ini command = setenv rootdev "/dev/mmcblk0p1" boot.ini command = setenv initrd_high "0xffffffff" boot.ini command = setenv fdt_high "0xffffffff" boot.ini command = setenv macaddr "00:1e:06:61:7a:55 boot.ini command = setenv bootrootfs "console=tty1 loglevel=1 root=${rootdev} rootwait ro fsck.repair=yes" boot.ini command = setenv vout "hdmi" boot.ini command = setenv cecenable "false" # false or true boot.ini command = setenv governor "performance" boot.ini command = setenv HPD "true" boot.ini command = setenv hdmi_tx_amp_lvl "31" boot.ini command = setenv hdmi_tx_lvl_ch0 "3" boot.ini command = setenv hdmi_tx_lvl_ch1 "3" boot.ini command = setenv hdmi_tx_lvl_ch2 "3" boot.ini command = setenv hdmi_tx_emp_lvl "6" boot.ini command = setenv hdmi_clk_amp_lvl "31" boot.ini command = setenv hdmi_tx_res "0" boot.ini command = setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}" boot.ini command = ext4load mmc 0:1 0x40008000 /boot/zImage || fatload mmc 0:1 0x40008000 zImage || ext4load mmc 0:1 0x40008000 zImage Loading file "/boot/zImage" from mmc device 0:1 xxa1 3436918 bytes read boot.ini command = ext4load mmc 0:1 0x42000000 /boot/uInitrd || fatload mmc 0:1 0x42000000 uInitrd || ext4load mmc 0:1 0x42000000 uInitrd Loading file "/boot/uInitrd" from mmc device 0:1 xxa1 5124289 bytes read boot.ini command = ext4load mmc 0:1 0x44000000 /boot/dtb/exynos5422-odroidxu3.dtb || fatload mmc 0:1 0x44000000 dtb/exynos5422-odroidxu3.dtb || ext4load mmc 0:1 0x44000000 dtb/exynos5422-odroidxu3.dtb Loading file "/boot/dtb/exynos5422-odroidxu3.dtb" from mmc device 0:1 xxa1 52006 bytes read boot.ini command = fdt addr 0x44000000 boot.ini command = if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi boot.ini command = setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} ${extraargs}" boot.ini command = bootz 0x40008000 0x42000000 0x44000000 ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5124225 Bytes = 4.9 MiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Using Device Tree in place at 44000000, end 4400fb25 Starting kernel ... [ 0.000000] [c0] Booting Linux on physical CPU 0x100 [ 0.000000] [c0] Initializing cgroup subsys cpuset [ 0.000000] [c0] Initializing cgroup subsys cpu [ 0.000000] [c0] Initializing cgroup subsys cpuacct [ 0.000000] [c0] Linux version 3.10.104-odroidxu4 (root@server1604) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #2 SMP PREEMPT Thu Oct 27 00:05:44 CEST 2016 [ 0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422 [ 0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh [ 0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd [ 0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video [ 0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma [ 0.000000] [c0] cma: CMA: reserved 104 MiB at b9800000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b9400000 [ 0.000000] [c0] cma: CMA: reserved 8 MiB at b8c00000 [ 0.000000] [c0] cma: CMA: reserved 96 MiB at b2c00000 [ 0.000000] [c0] cma: CMA: reserved 16 MiB at b1c00000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1800000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1400000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b1000000 [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b0c00000 [ 0.000000] [c0] cma: CMA: reserved 256 MiB at 4f000000 [ 0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] [c0] create_mapping_memory: section: 40000000 ~ 5f000000 [ 0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001) [ 0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1e98000 s14848 r8192 d13824 u36864 [ 0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523296 [ 0.000000] [c0] Kernel command line: console=ttySAC2,115200 vmalloc=512M [ 0.000000] [c0] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] [c0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] [c0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] [c0] allocated 4194304 bytes of page_cgroup [ 0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] [c0] Memory: 2048MB = 2048MB total [ 0.000000] [c0] Memory: 1548492k/1548492k available, 548660k reserved, 1339392K highmem [ 0.000000] [c0] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc090dfe4 (9240 kB) [ 0.000000] .init : 0xc090e000 - 0xc0978a00 ( 427 kB) [ 0.000000] .data : 0xc097a000 - 0xc09efd18 ( 472 kB) [ 0.000000] .bss : 0xc09efd18 - 0xc0e598e4 (4519 kB) [ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] [c0] Preemptible hierarchical RCU implementation. [ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] [c0] apll 800000000 [ 0.000000] [c0] bpll 825000000 [ 0.000000] [c0] cpll 666000000 [ 0.000000] [c0] dpll 600000000 [ 0.000000] [c0] epll 180633609 [ 0.000000] [c0] rpll 66000000 [ 0.000000] [c0] ipll 432000000 [ 0.000000] [c0] spll 800000000 [ 0.000000] [c0] dout_spll_ctrl_div2 400000000 [ 0.000000] [c0] vpll 400000000 [ 0.000000] [c0] mpll 532000000 [ 0.000000] [c0] Clock enables : TOP, MIF [ 0.000000] [c0] mmc0: dout_mmc0 666000000 [ 0.000000] [c0] mmc1: dout_mmc1 800000000 [ 0.000000] [c0] mmc2: dout_mmc2 666000000 [ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000 [ 0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000 [ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000 [ 0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000 [ 0.000000] [c0] mfc: aclk_333 400000000 [ 0.000000] [c0] Exynos5422: clock setup completed [ 0.000000] [c0] Exynos: pwm: clock setup completed [ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] [c0] Switching to timer-based delay loop [ 0.000000] [c0] EXYNOS5422 PMU Initialize [ 0.000000] [c0] Console: colour dummy device 80x30 [ 0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] [c0] ... MAX_LOCK_DEPTH: 48 [ 0.000000] [c0] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] [c0] ... CLASSHASH_SIZE: 4096 [ 0.000000] [c0] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] [c0] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] [c0] ... CHAINHASH_SIZE: 16384 [ 0.000000] [c0] memory used by lock dependency info: 3679 kB [ 0.000000] [c0] per task-struct memory footprint: 1152 bytes [ 0.000814] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 0.000840] [c0] pid_max: default: 32768 minimum: 301 [ 0.001282] [c0] Mount-cache hash table entries: 512 [ 0.036633] [c0] Initializing cgroup subsys memory [ 0.036726] [c0] Initializing cgroup subsys devices [ 0.036757] [c0] Initializing cgroup subsys freezer [ 0.036786] [c0] Initializing cgroup subsys blkio [ 0.036805] [c0] Initializing cgroup subsys perf_event [ 0.037022] [c0] CPU: Testing write buffer coherency: ok [ 0.037085] [c0] ftrace: allocating 23323 entries in 69 pages [ 0.086469] [c0] /cpus/cpu@0 missing clock-frequency property [ 0.086501] [c0] /cpus/cpu@1 missing clock-frequency property [ 0.086522] [c0] /cpus/cpu@2 missing clock-frequency property [ 0.086544] [c0] /cpus/cpu@3 missing clock-frequency property [ 0.086563] [c0] /cpus/cpu@4 missing clock-frequency property [ 0.086582] [c0] /cpus/cpu@5 missing clock-frequency property [ 0.086601] [c0] /cpus/cpu@6 missing clock-frequency property [ 0.086620] [c0] /cpus/cpu@7 missing clock-frequency property [ 0.086697] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.086877] [c0] Running under secure firmware. [ 0.086925] [c0] Setting up static identity map for 0xc0679848 - 0xc06798a0 [ 0.086954] [c0] Exynos-SnapShot: exynos_ss_init failed [ 0.107381] [c0] ftrace: Allocated trace_printk buffers [ 0.129337] [c1] CPU1: Booted secondary processor [ 0.129366] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.139273] [c2] CPU2: Booted secondary processor [ 0.139299] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.149268] [c3] CPU3: Booted secondary processor [ 0.149295] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.158266] [c4] CPU4: Booted secondary processor [ 0.159036] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.168255] [c5] CPU5: Booted secondary processor [ 0.169030] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.178289] [c6] CPU6: Booted secondary processor [ 0.179063] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.188260] [c7] CPU7: Booted secondary processor [ 0.189035] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.189301] [c0] Brought up 8 CPUs [ 0.189366] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.189381] [c0] CPU: All CPU(s) started in HYP mode. [ 0.189394] [c0] CPU: Virtualization extensions available. [ 0.191817] [c0] devtmpfs: initialized [ 0.229236] [c6] sched: registering cpufreq notifiers for scale-invariant loads [ 0.231988] [c6] pinctrl core: initialized pinctrl subsystem [ 0.233010] [c6] regulator-dummy: no parameters [ 0.242662] [c6] NET: Registered protocol family 16 [ 0.242889] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.281472] [c4] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered [ 0.281934] [c4] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered [ 0.289704] [c4] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.289722] [c4] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.291626] [c4] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.295850] [c4] PM DOMAIN: pd-cam has a new child pd-isp. [ 0.296710] [c4] PM DOMAIN: pd-gscl has a new child pd-cam. [ 0.296739] [c4] EXYNOS5: PM Domain Initialize [ 0.297028] [c4] pd-gscl - on [ 0.297201] [c4] pd-isp - on [ 0.297373] [c4] pd-mfc - on [ 0.297392] [c4] pd-g3d - on, always [ 0.297411] [c4] pd-disp1 - on, always [ 0.297587] [c4] pd-maudio - on [ 0.297605] [c4] pd-g2d - on, always [ 0.297780] [c4] pd-mscl - on [ 0.297800] [c4] pd-fsys - on, always [ 0.297819] [c4] pd-psgen - on, always [ 0.297838] [c4] pd-peric - on, always [ 0.297856] [c4] pd-wcore - on, always [ 0.298032] [c4] pd-cam - on [ 0.298059] [c4] EXYNOS: Initializing architecture [ 0.299591] [c4] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d [ 0.299613] [c4] exynos-sysmmu 10a60000.sysmmu: [OK] [ 0.299942] [c4] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d [ 0.299964] [c4] exynos-sysmmu 10a70000.sysmmu: [OK] [ 0.300296] [c4] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer [ 0.300317] [c4] exynos-sysmmu 14650000.sysmmu: [OK] [ 0.300624] [c4] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc [ 0.300645] [c4] exynos-sysmmu 13e80000.sysmmu: [OK] [ 0.300951] [c4] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc [ 0.300972] [c4] exynos-sysmmu 13e90000.sysmmu: [OK] [ 0.301287] [c4] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler [ 0.301308] [c4] exynos-sysmmu 12880000.sysmmu: [OK] [ 0.301631] [c4] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler [ 0.301651] [c4] exynos-sysmmu 12890000.sysmmu: [OK] [ 0.301971] [c4] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler [ 0.301991] [c4] exynos-sysmmu 128a0000.sysmmu: [OK] [ 0.302308] [c4] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler [ 0.302328] [c4] exynos-sysmmu 128c0000.sysmmu: [OK] [ 0.302643] [c4] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler [ 0.302663] [c4] exynos-sysmmu 128d0000.sysmmu: [OK] [ 0.302979] [c4] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler [ 0.302999] [c4] exynos-sysmmu 128e0000.sysmmu: [OK] [ 0.303307] [c4] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg [ 0.303327] [c4] exynos-sysmmu 11f10000.sysmmu: [OK] [ 0.303648] [c4] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg [ 0.303668] [c4] exynos-sysmmu 11f20000.sysmmu: [OK] [ 0.303966] [c4] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc [ 0.303986] [c4] exynos-sysmmu 11200000.sysmmu: [OK] [ 0.304309] [c4] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc [ 0.304330] [c4] exynos-sysmmu 11210000.sysmmu: [OK] [ 0.304677] [c4] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd [ 0.304697] [c4] exynos-sysmmu 14640000.sysmmu: [OK] [ 0.305035] [c4] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd [ 0.305055] [c4] exynos-sysmmu 14680000.sysmmu: [OK] [ 0.305482] [c4] CPU Info : Samsung Exynos5422 Soc is BIN1 [ 0.305498] [c4] Exynos5422 ASV : Use Fusing Speed Group 2 [ 0.305512] [c4] Exynos5422 ASV : invalid IDS value [ 0.305526] [c4] EXYNOS5422 ASV : IDS : 0 HPM : 0 [ 0.305571] [c4] VDD_ARM ASV group is 2 [ 0.305589] [c4] VDD_KFC ASV group is 2 [ 0.305606] [c4] VDD_INT ASV group is 2 [ 0.305623] [c4] VDD_MIF ASV group is 2 [ 0.305638] [c4] VDD_G3D ASV group is 2 [ 0.305654] [c4] VDD_ISP ASV group is 2 [ 0.318844] [c4] bio: create slab <bio-0> at 0 [ 0.320861] [c4] VUSB_BOOST_5V: 5000 mV [ 0.321418] [c4] MAIN_DC: no parameters [ 0.321875] [c4] hdmi-en: no parameters [ 0.323048] [c4] SCSI subsystem initialized [ 0.323444] [c4] usbcore: registered new interface driver usbfs [ 0.323550] [c4] usbcore: registered new interface driver hub [ 0.323779] [c4] usbcore: registered new device driver usb [ 0.329815] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV [ 0.331066] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV [ 0.332313] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV [ 0.333553] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV [ 0.334898] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV [ 0.336699] [c4] vddf_2v85: 3300 mV [ 0.338103] [c4] vdd_adc: 1800 mV [ 0.339517] [c4] vdd_pll: 1800 mV [ 0.340913] [c4] vdd_ldo6: 1000 mV [ 0.342310] [c4] vdd_ldo7: 1800 mV [ 0.343708] [c4] vdd_ldo8: 1800 mV [ 0.345204] [c4] vdd_ldo9: 3300 mV [ 0.346599] [c4] vdd_ldo10: 1800 mV [ 0.347996] [c4] vdd_ldo11: 1000 mV [ 0.349079] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV [ 0.350509] [c4] vdd_ldo15: 3300 mV [ 0.351921] [c4] vdd_eth: 3300 mV [ 0.353440] [c4] vdd_ldo18: 1850 mV [ 0.354531] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV [ 0.355683] [c4] vdd_mifs: 800 <--> 1100 mV at 1100 mV [ 0.357077] [c4] vdd_ldo26: 3000 mV [ 0.358175] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV [ 0.359595] [c4] vdd_ldo28: 3300 mV [ 0.361121] [c4] vdd_ldo30: 3300 mV [ 0.364912] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL) [ 0.365521] [c4] s3c-i2c 12c60000.i2c: slave address 0x00 [ 0.368170] [c5] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter [ 0.368433] [c5] s3c-i2c 12c70000.i2c: slave address 0x00 [ 0.368705] [c5] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter [ 0.369203] [c5] media: Linux media interface: v0.10 [ 0.369299] [c5] Linux video capture interface: v2.00 [ 0.371293] [c5] IOVMMU: Created debugfs entry at debugfs/iovmm [ 0.371872] [c5] Advanced Linux Sound Architecture Driver Initialized. [ 0.372490] [c5] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered [ 0.372528] [c5] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics [ 0.374561] [c5] Loading modules backported from Linux version next-20150222-0-g53e418f1 [ 0.374577] [c5] Backport integrated by backports.git backports-20150222-0-g2745ccd [ 0.376015] [c5] Switching to clocksource mct-frc [ 0.461235] [c5] NET: Registered protocol family 2 [ 0.462986] [c5] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.463363] [c5] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.464364] [c5] TCP: Hash tables configured (established 4096 bind 4096) [ 0.464471] [c5] TCP: reno registered [ 0.464499] [c5] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.464661] [c5] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.465582] [c5] NET: Registered protocol family 1 [ 0.478673] [c5] bounce pool size: 64 pages [ 0.487024] [c5] VFS: Disk quotas dquot_6.5.2 [ 0.487373] [c5] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.490517] [c5] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.491420] [c5] msgmni has been set to 920 [ 0.495632] [c5] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.495675] [c5] io scheduler noop registered [ 0.495692] [c5] io scheduler deadline registered [ 0.495908] [c5] io scheduler cfq registered (default) [ 0.508578] [c5] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.508601] [c5] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.514409] [c5] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.514431] [c5] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.520218] [c5] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.520239] [c5] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.523333] [c5] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.523353] [c5] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.663018] [c5] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.665763] [c5] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10 [ 0.666608] [c5] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10 [ 0.667341] [c5] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10 [ 2.182271] [c5] console [ttySAC2] enabled [ 2.187007] [c5] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10 [ 2.197502] [c5] [drm] Initialized drm 1.1.0 20060810 [ 2.208607] [c5] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.214252] [c5] [drm] No driver support for vblank timestamp query. [ 2.220569] [c5] exynos-mixer 14450000.mixer: probe start [ 2.226229] [c5] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.234133] [c5] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.241592] [c5] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.248384] [c5] mali 11800000.mali: Continuing without Mali clock control [ 2.258249] [c5] hrtimer: interrupt took 113625 ns [ 2.261860] [c7] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0 [ 2.271531] mali 11800000.mali: Probed as mali0 [ 2.282176] [c7] loop: module loaded [ 2.285421] [c7] tun: Universal TUN/TAP device driver, 1.6 [ 2.289789] [c7] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.704960] [c7] dwc3 12400000.dwc3: dwc3_otg address space is not supported [ 2.711637] [c7] dwc3 12400000.dwc3: Binding gadget dwc3-gadget [ 2.717243] [c7] dwc3 12400000.dwc3: Turn on host [ 2.922228] [c7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.927757] [c7] ehci-s5p: EHCI s5p driver [ 2.932406] [c7] s5p-ehci 12110000.usb: EHCI Host Controller [ 2.937603] [c7] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.945481] [c7] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000 [ 2.961245] [c7] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.967427] [c7] hub 1-0:1.0: USB hub found [ 2.970160] [c7] hub 1-0:1.0: 3 ports detected [ 2.975961] [c7] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.981587] [c7] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller [ 2.987739] [c7] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.995830] [c7] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000 [ 3.061517] [c7] hub 2-0:1.0: USB hub found [ 3.064256] [c7] hub 2-0:1.0: 3 ports detected [ 3.070224] [c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.074942] [c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 3.083035] [c7] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000 [ 3.090429] [c7] hub 3-0:1.0: USB hub found [ 3.093424] [c7] hub 3-0:1.0: 1 port detected [ 3.098254] [c7] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.103643] [c7] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 3.112889] [c7] hub 4-0:1.0: USB hub found [ 3.115822] [c7] hub 4-0:1.0: 1 port detected [ 3.120836] [c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 3.126114] [c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5 [ 3.134392] [c7] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000 [ 3.141778] [c7] hub 5-0:1.0: USB hub found [ 3.144716] [c7] hub 5-0:1.0: 1 port detected [ 3.149630] [c7] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 3.154999] [c7] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6 [ 3.164255] [c7] hub 6-0:1.0: USB hub found [ 3.167361] [c7] hub 6-0:1.0: 1 port detected [ 3.172470] [c7] usbcore: registered new interface driver usb-storage [ 3.178198] [c7] usbcore: registered new interface driver usbserial [ 3.184294] [c7] usbcore: registered new interface driver usbserial_generic [ 3.191268] [c7] usbserial: USB Serial support registered for generic [ 3.198484] [c4] exynos-usb-switch usb-switch.10: host detect gpio is not available [ 3.205233] [c4] exynos-usb-switch usb-switch.10: device detect gpio is not available [ 3.213038] [c4] exynos-usb-switch usb-switch.10: vbus control gpio is not available [ 3.220762] [c4] exynos-usb-switch usb-switch.10: failed to configure pins [ 3.227785] [c4] exynos-usb-switch usb-switch.10: udc device is not available [ 3.234736] [c4] exynos-usb-switch usb-switch.10: Disable device detect IRQ [ 3.266261] [c4] usb cable = 1 [ 3.268885] [c4] mousedev: PS/2 mouse device common for all mice [ 3.277414] [c4] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR [ 3.282462] [c4] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL [ 3.288777] [c4] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7) [ 3.297713] [c4] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0 [ 3.303664] [c4] i2c /dev entries driver [ 3.308721] [c4] IR NEC protocol handler initialized [ 3.312260] [c4] IR RC5(x) protocol handler initialized [ 3.317455] [c4] IR RC6 protocol handler initialized [ 3.322405] [c4] IR JVC protocol handler initialized [ 3.327344] [c4] IR Sony protocol handler initialized [ 3.332382] [c4] IR RC5 (streamzap) protocol handler initialized [ 3.338367] [c4] IR SANYO protocol handler initialized [ 3.343484] [c4] IR MCE Keyboard/mouse protocol handler initialized [ 3.350245] [c4] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered [ 3.356094] [c4] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted! [ 3.363655] [c4] s5p-mfc 11000000.mfc: decoder registered as /dev/video6 [ 3.369844] [c4] s5p-mfc 11000000.mfc: encoder registered as /dev/video7 [ 3.376585] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000. [ 3.384814] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000. [ 3.393392] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000. [ 3.401987] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000. [ 3.410575] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000. [ 3.419160] [c4] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000. [ 3.428727] [c4] ion_cma ion_mfc_nfw: Alread isolated! [ 3.433184] [c4] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics [ 3.440554] [c4] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec [ 3.446883] s5p-tvout-cec 101b0000.cec: probe successful [ 3.453645] [c4] TRIMINFO[0] = 0x80672d [ 3.456011] [c4] TMU_CONTROL[0] = 0x10609803 [ 3.460306] [c4] CURRENT_TEMP[0] = 0x31 [ 3.464114] [c4] THRESHOLD_TEMP_RISE[0] = 0x827d7873 [ 3.469063] [c4] THRESHOLD_TEMP_FALL[0] = 0x807b7671 [ 3.474009] [c4] INTEN[0] = 0x11111111 [ 3.477739] [c4] INTCLEAR[0] = 0x0 [ 3.481118] [c4] TRIMINFO[1] = 0x806830 [ 3.484942] [c4] TMU_CONTROL[1] = 0x10609803 [ 3.489244] [c4] CURRENT_TEMP[1] = 0x32 [ 3.493036] [c4] THRESHOLD_TEMP_RISE[1] = 0x85807b76 [ 3.497958] [c4] THRESHOLD_TEMP_FALL[1] = 0x837e7974 [ 3.502902] [c4] INTEN[1] = 0x11111111 [ 3.506633] [c4] INTCLEAR[1] = 0x0 [ 3.510012] [c4] TRIMINFO[2] = 0x806d35 [ 3.513835] [c4] TMU_CONTROL[2] = 0x10609803 [ 3.518086] [c4] CURRENT_TEMP[2] = 0x35 [ 3.521899] [c4] THRESHOLD_TEMP_RISE[2] = 0x85807b76 [ 3.526849] [c4] THRESHOLD_TEMP_FALL[2] = 0x837e7974 [ 3.531795] [c4] INTEN[2] = 0x11111111 [ 3.535489] [c4] INTCLEAR[2] = 0x0 [ 3.538942] [c4] TRIMINFO[3] = 0x806a30 [ 3.542728] [c4] TMU_CONTROL[3] = 0x10609803 [ 3.546979] [c4] CURRENT_TEMP[3] = 0x36 [ 3.550760] [c4] THRESHOLD_TEMP_RISE[3] = 0x89847f7a [ 3.555740] [c4] THRESHOLD_TEMP_FALL[3] = 0x87827d78 [ 3.560689] [c4] INTEN[3] = 0x11111111 [ 3.564419] [c4] INTCLEAR[3] = 0x0 [ 3.567834] [c4] TRIMINFO[4] = 0x806e34 [ 3.571622] [c4] TMU_CONTROL[4] = 0x10609803 [ 3.575835] [c4] CURRENT_TEMP[4] = 0x35 [ 3.579690] [c4] THRESHOLD_TEMP_RISE[4] = 0x8a85807b [ 3.584636] [c4] THRESHOLD_TEMP_FALL[4] = 0x88837e79 [ 3.589581] [c4] INTEN[4] = 0x11111111 [ 3.593314] [c4] INTCLEAR[4] = 0x0 [ 3.597933] [c4] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 3.606507] [c4] cpuidle: using governor ladder [ 3.611740] [c4] cpuidle: using governor menu [ 3.614676] [c4] Synopsys Designware Multimedia Card Interface Driver [ 3.622175] [c4] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4 [ 3.631112] [c4] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered. [ 3.640968] [c4] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller. [ 3.647987] [c4] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030 [ 3.654139] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a [ 3.660180] [c4] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo [ 3.661354] [c7] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 3.696258] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 3.716415] [c4] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized [ 3.721742] [c5] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3 [ 3.731330] [c5] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller. [ 3.738169] [c5] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030 [ 3.744322] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a [ 3.750404] [c6] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo [ 3.760592] [c6] mmc1: vmmc regulator found [ 3.764514] [c6] mmc1: vqmmc regulator found [ 3.771283] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35) [ 3.786283] [c6] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 3.790992] [c7] hub 3-1:1.0: USB hub found [ 3.803711] [c7] hub 3-1:1.0: 2 ports detected [ 3.811428] [c6] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized [ 3.817345] [c6] leds-gpio leds.15: pins are not configured from the driver [ 3.824554] [c6] ledtrig-cpu: registered to indicate activity on CPUs [ 3.829607] [c6] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics [ 3.836879] [c6] ACE: ecb-aes-s5p-ace [ 3.839946] [c6] ACE: cbc-aes-s5p-ace [ 3.841292] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53) [ 3.853543] [c6] ACE: ctr-aes-s5p-ace [ 3.857166] [c6] ACE: xts-aes-s5p-ace [ 3.860782] [c6] ACE: sha1-s5p-ace [ 3.864198] [c6] ACE: sha256-s5p-ace [ 3.867494] [c6] ACE driver is initialized [ 3.871843] [c6] hidraw: raw HID events driver (C) Jiri Kosina [ 3.877816] [c6] usbcore: registered new interface driver usbhid [ 3.883348] [c6] usbhid: USB HID core driver [ 3.888515] [c6] exynos-adc 12d10000.adc: operating without regulator vdd[-19] [ 3.895392] [c6] exynos-adc 12d10000.adc: Probed successfully driver. [ 3.902112] [c6] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API [ 3.906311] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105) [ 3.918914] [c6] pwm-samsung: tin parent at 66600000 [ 3.927738] [c6] lpass_register_subip: i2s(cdb3c010) registered [ 3.981676] [c4] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.002774] [c4] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 4.024735] [c4] hub 4-1:1.0: USB hub found [ 4.027908] [c4] hub 4-1:1.0: 2 ports detected [ 4.037113] [c7] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209) [ 4.045809] [c7] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0) [ 4.059831] [c7] mmc_host mmc1: Tuning error: cmd.error:-5, data.error:-115 [ 4.065375] [c7] dwmmc_exynos 12220000.dwmmc2: divratio: 3 map: 0x 00007fff [ 4.072391] [c7] dwmmc_exynos 12220000.dwmmc2: sample_good: 0x 7fff best_sample: 0x 06 [ 4.080275] [c7] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 4.088248] [c7] mmcblk0: mmc1:59b4 29.8 GiB [ 4.094562] [c7] mmcblk0: p1 [ 4.116278] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27) [ 4.176270] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35) [ 4.241269] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53) [ 4.256317] [c5] usb 2-1: new full-speed USB device number 2 using exynos-ohci [ 4.311269] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105) [ 4.478428] [c5] input: Logitech USB Receiver as /devices/12120000.usb/usb2/2-1/2-1:1.0/input/input0 [ 4.487436] [c5] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-12120000.usb-1/input0 [ 4.506336] [c5] input: Logitech USB Receiver as /devices/12120000.usb/usb2/2-1/2-1:1.1/input/input1 [ 4.515993] [c5] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-12120000.usb-1/input1 [ 4.597051] [c5] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd [ 4.648367] [c5] hub 3-1.1:1.0: USB hub found [ 4.651583] [c5] hub 3-1.1:1.0: 4 ports detected [ 4.771487] [c5] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.791757] [c5] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 4.882781] [c5] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd [ 4.931229] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0) [ 4.931229] : CTL 0x00000089 [ 4.931229] : FIFO_CTL 0x00200203 [ 4.931229] : TRAILING_CTL 0x0000000f [ 4.931229] : CLK_CTL 0x00000000 [ 4.931229] : CLK_SLOT 0x00000000 [ 4.931229] : INT_EN 0x00000000 [ 4.931229] : INT_STAT 0x00000000 [ 4.931229] : ERR_STAT 0x00000000 [ 4.931229] : FIFO_STAT 0x01000002 [ 4.931229] : TXDATA 0xdeadbeaf [ 4.931229] : RXDATA 0x00000000 [ 4.931229] : CONF 0xb00300ff [ 4.931229] : AUTO_CONF 0x00020002 [ 4.931229] : TIMEOUT 0x000000ff [ 4.931229] : MANUAL_CMD 0x00000000 [ 4.931229] : TRANS_STAT 0x00000000 [ 4.931229] : TIMING_HS1 0x4b4b4b00 [ 4.931229] : TIMING_HS2 0x25004b4b [ 4.931229] : TIMING_HS3 0x00000096 [ 4.931229] : TIMING_FS1 0x4b4b4b00 [ 4.931229] : TIMING_FS2 0x25004b4b [ 4.931229] : TIMING_FS3 0x00000096 [ 4.931229] : TIMING_SLA 0x00000025 [ 5.020631] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout [ 5.132912] [c5] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 5.144356] [c5] hub 4-1.1:1.0: USB hub found [ 5.147494] [c5] hub 4-1.1:1.0: 4 ports detected [ 5.222684] [c5] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd [ 5.242572] [c5] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 5.254611] [c5] usb-storage 4-1.2:1.0: USB Mass Storage device detected [ 5.260546] [c5] scsi0 : usb-storage 4-1.2:1.0 [ 5.346478] [c5] usb 3-1.1.1: new full-speed USB device number 4 using xhci-hcd [ 6.021226] [c6] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0) [ 6.021226] : CTL 0x00000089 [ 6.021226] : FIFO_CTL 0x00200203 [ 6.021226] : TRAILING_CTL 0x0000000f [ 6.021226] : CLK_CTL 0x00000000 [ 6.021226] : CLK_SLOT 0x00000000 [ 6.021226] : INT_EN 0x00000000 [ 6.021226] : INT_STAT 0x00000000 [ 6.021226] : ERR_STAT 0x00000000 [ 6.021226] : FIFO_STAT 0x01000002 [ 6.021226] : TXDATA 0xdeadbeaf [ 6.021226] : RXDATA 0x00000000 [ 6.021226] : CONF 0xb00300ff [ 6.021226] : AUTO_CONF 0x00020002 [ 6.021226] : TIMEOUT 0x000000ff [ 6.021226] : MANUAL_CMD 0x00000000 [ 6.021226] : TRANS_STAT 0x00000000 [ 6.021226] : TIMING_HS1 0x4b4b4b00 [ 6.021226] : TIMING_HS2 0x25004b4b [ 6.021226] : TIMING_HS3 0x00000096 [ 6.021226] : TIMING_FS1 0x4b4b4b00 [ 6.021226] : TIMING_FS2 0x25004b4b [ 6.021226] : TIMING_FS3 0x00000096 [ 6.021226] : TIMING_SLA 0x00000025 [ 6.110627] [c6] exynos5-hsi2c 12cb0000.hsi2c: tx timeout [ 6.116087] [c6] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed [ 6.122169] [c6] max98090 1-0010: Failed to reset codec: -5 [ 6.127725] [c6] max98090 1-0010: Failed to device reset : -5 [ 6.133426] [c6] max98090 1-0010: ASoC: failed to probe CODEC -5 [ 6.139633] [c6] odroid-audio sound.13: ASoC: failed to instantiate card -5 [ 6.146685] [c6] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5 [ 6.155059] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.162202] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.170328] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.178418] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.186546] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file [ 6.194615] [c6] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file [ 6.203546] [c6] odroid-audio sound.13: dummy-aif1 <-> samsung-i2s-sec mapping ok [ 6.211380] [c6] odroid-audio sound.13: dummy-aif2 <-> 3830000.i2s mapping ok [ 6.220702] [c6] Netfilter messages via NETLINK v0.30. [ 6.225133] [c6] arp_tables: (C) 2002 David S. Miller [ 6.229633] [c6] TCP: cubic registered [ 6.233184] [c6] Initializing XFRM netlink socket [ 6.238634] [c6] NET: Registered protocol family 10 [ 6.244382] [c6] mip6: Mobile IPv6 [ 6.246375] [c6] sit: IPv6 over IPv4 tunneling driver [ 6.253172] [c6] NET: Registered protocol family 17 [ 6.256675] [c6] NET: Registered protocol family 15 [ 6.261522] [c6] NET: Registered protocol family 35 [ 6.262820] [c5] scsi 0:0:0:0: Direct-Access ST950032 5AS 1003 PQ: 0 ANSI: 6 [ 6.265349] [c5] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.265446] [c7] sd 0:0:0:0: [sda] 976773152 512-byte logical blocks: (500 GB/465 GiB) [ 6.266598] [c7] sd 0:0:0:0: [sda] Write Protect is off [ 6.267729] [c7] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 6.302800] [c6] VFP support v0.3: [ 6.305738] sda: sda1 [c6] implementor 41 architecture 4 part 30 variant f rev 0 [ 6.310909] [c7] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.318557] [c6] Registering SWP/SWPB emulation handler [ 6.323701] [c6] SRAM ASV group [2] : MIF(950000), G3D(975000) [ 6.335735] [c6] registered taskstats version 1 [ 6.339039] [c6] hdmi-en: disabling [ 6.342354] [c6] MAIN_DC: disabling [ 6.345735] [c6] regulator-dummy: disabling [ 6.351597] [c6] input: gpio_keys.7 as /devices/gpio_keys.7/input/input2 [ 6.357532] [c6] CPUFREQ of CA7 L0 : 1300000 uV [ 6.361488] [c6] CPUFREQ of CA7 L0 : ABB 8 [ 6.365582] [c6] CPUFREQ of CA7 L1 : 1300000 uV [ 6.370243] [c6] CPUFREQ of CA7 L1 : ABB 2 [ 6.374402] [c6] CPUFREQ of CA7 L2 : 1250000 uV [ 6.379004] [c6] CPUFREQ of CA7 L2 : ABB 2 [ 6.383169] [c6] CPUFREQ of CA7 L3 : 1200000 uV [ 6.387772] [c6] CPUFREQ of CA7 L3 : ABB 2 [ 6.391933] [c6] CPUFREQ of CA7 L4 : 1150000 uV [ 6.396530] [c6] CPUFREQ of CA7 L4 : ABB 2 [ 6.400636] [c6] CPUFREQ of CA7 L5 : 1112500 uV [ 6.405294] [c6] CPUFREQ of CA7 L5 : ABB 2 [ 6.409459] [c6] CPUFREQ of CA7 L6 : 1075000 uV [ 6.414057] [c6] CPUFREQ of CA7 L6 : ABB 2 [ 6.418222] [c6] CPUFREQ of CA7 L7 : 1037500 uV [ 6.422820] [c6] CPUFREQ of CA7 L7 : ABB 2 [ 6.426986] [c6] CPUFREQ of CA7 L8 : 1000000 uV [ 6.431585] [c6] CPUFREQ of CA7 L8 : ABB 255 [ 6.435863] [c6] CPUFREQ of CA7 L9 : 962500 uV [ 6.440436] [c6] CPUFREQ of CA7 L9 : ABB 255 [ 6.444772] [c6] CPUFREQ of CA7 L10 : 925000 uV [ 6.449372] [c6] CPUFREQ of CA7 L10 : ABB 255 [ 6.453797] [c6] CPUFREQ of CA7 L11 : 900000 uV [ 6.458453] [c6] CPUFREQ of CA7 L11 : ABB 255 [ 6.462825] [c6] CPUFREQ of CA7 L12 : 900000 uV [ 6.467420] [c6] CPUFREQ of CA7 L12 : ABB 255 [ 6.471844] [c6] CPUFREQ of CA7 L13 : 900000 uV [ 6.476444] [c6] CPUFREQ of CA7 L13 : ABB 255 [ 6.480809] [c6] CPUFREQ of CA7 L14 : 900000 uV [ 6.485467] [c6] CPUFREQ of CA7 L14 : ABB 255 [ 6.490189] [c6] kfc clock[800000], mx_mspll clock[666000] [ 6.495374] [c6] [SET_EMA_TEST] volt : 887500 value : 0x44 [ 6.500913] [c6] [SET_EMA_TEST] volt : 937500 value : 0x44 [ 6.506466] [c6] [SET_EMA_TEST] volt : 1032500 value : 0x33 [ 6.512105] [c6] [SET_EMA_TEST] volt : 1142500 value : 0x11 [ 6.517745] [c6] [SET_EMA_TEST] volt : 1167500 value : 0x11 [ 6.523385] [c6] CPUFREQ of CA15 L0 : 1362500 uV [ 6.527983] [c6] CPUFREQ of CA15 L0 : ABB 8 [ 6.532234] [c6] CPUFREQ of CA15 L1 : 1362500 uV [ 6.536842] [c6] CPUFREQ of CA15 L1 : ABB 8 [ 6.541025] [c6] CPUFREQ of CA15 L2 : 1362500 uV [ 6.545683] [c6] CPUFREQ of CA15 L2 : ABB 8 [ 6.549934] [c6] CPUFREQ of CA15 L3 : 1350000 uV [ 6.554534] [c6] CPUFREQ of CA15 L3 : ABB 255 [ 6.558958] [c6] CPUFREQ of CA15 L4 : 1300000 uV [ 6.563558] [c6] CPUFREQ of CA15 L4 : ABB 255 [ 6.567982] [c6] CPUFREQ of CA15 L5 : 1225000 uV [ 6.572578] [c6] CPUFREQ of CA15 L5 : ABB 255 [ 6.577006] [c6] CPUFREQ of CA15 L6 : 1175000 uV [ 6.581604] [c6] CPUFREQ of CA15 L6 : ABB 255 [ 6.585970] [c6] CPUFREQ of CA15 L7 : 1137500 uV [ 6.590629] [c6] CPUFREQ of CA15 L7 : ABB 255 [ 6.595054] [c6] CPUFREQ of CA15 L8 : 1100000 uV [ 6.599652] [c6] CPUFREQ of CA15 L8 : ABB 255 [ 6.604078] [c6] CPUFREQ of CA15 L9 : 1062500 uV [ 6.608683] [c6] CPUFREQ of CA15 L9 : ABB 255 [ 6.613102] [c6] CPUFREQ of CA15 L10 : 1037500 uV [ 6.617789] [c6] CPUFREQ of CA15 L10 : ABB 255 [ 6.622298] [c6] CPUFREQ of CA15 L11 : 1025000 uV [ 6.626984] [c6] CPUFREQ of CA15 L11 : ABB 255 [ 6.631495] [c6] CPUFREQ of CA15 L12 : 1000000 uV [ 6.636121] [c6] CPUFREQ of CA15 L12 : ABB 255 [ 6.640693] [c6] CPUFREQ of CA15 L13 : 975000 uV [ 6.645292] [c6] CPUFREQ of CA15 L13 : ABB 255 [ 6.649808] [c6] CPUFREQ of CA15 L14 : 950000 uV [ 6.654404] [c6] CPUFREQ of CA15 L14 : ABB 255 [ 6.658915] [c6] CPUFREQ of CA15 L15 : 925000 uV [ 6.663513] [c6] CPUFREQ of CA15 L15 : ABB 255 [ 6.668024] [c6] CPUFREQ of CA15 L16 : 900000 uV [ 6.672620] [c6] CPUFREQ of CA15 L16 : ABB 255 [ 6.677136] [c6] CPUFREQ of CA15 L17 : 900000 uV [ 6.681734] [c6] CPUFREQ of CA15 L17 : ABB 255 [ 6.686246] [c6] CPUFREQ of CA15 L18 : 900000 uV [ 6.690784] [c6] CPUFREQ of CA15 L18 : ABB 255 [ 6.695356] [c6] CPUFREQ of CA15 L19 : 900000 uV [ 6.699956] [c6] CPUFREQ of CA15 L19 : ABB 255 [ 6.704467] [c6] CPUFREQ of CA15 L20 : 900000 uV [ 6.709065] [c6] CPUFREQ of CA15 L20 : ABB 255 [ 6.713577] [c6] CPUFREQ of CA15 L21 : 900000 uV [ 6.718176] [c6] CPUFREQ of CA15 L21 : ABB 255 [ 6.722687] [c6] CPUFREQ of CA15 L22 : 900000 uV [ 6.727286] [c6] CPUFREQ of CA15 L22 : ABB 255 [ 6.732137] [c6] eagle clock[800000], mpll clock[800000] [ 6.741438] [c6] Exynos: Kernel Thermal management registered [ 6.746242] [c6] ### dt-test ### No testcase data in device tree; not running tests [ 6.789591] [c6] MIF 825000Khz ASV is 975000uV [ 6.792663] [c6] DEVFREQ(MIF) : 825000Khz, ABB 14 [ 6.797279] [c6] MIF 728000Khz ASV is 937500uV [ 6.801708] [c6] DEVFREQ(MIF) : 728000Khz, ABB 14 [ 6.806387] [c6] MIF 633000Khz ASV is 900000uV [ 6.810781] [c6] DEVFREQ(MIF) : 633000Khz, ABB 14 [ 6.815497] [c6] MIF 543000Khz ASV is 875000uV [ 6.819924] [c6] DEVFREQ(MIF) : 543000Khz, ABB 14 [ 6.824607] [c6] MIF 413000Khz ASV is 812500uV [ 6.829035] [c6] DEVFREQ(MIF) : 413000Khz, ABB 14 [ 6.833718] [c6] MIF 275000Khz ASV is 787500uV [ 6.838145] [c6] DEVFREQ(MIF) : 275000Khz, ABB 14 [ 6.842828] [c6] MIF 206000Khz ASV is 787500uV [ 6.847257] [c6] DEVFREQ(MIF) : 206000Khz, ABB 14 [ 6.851940] [c6] MIF 165000Khz ASV is 787500uV [ 6.856366] [c6] DEVFREQ(MIF) : 165000Khz, ABB 14 [ 6.861016] [c6] MIF 138000Khz ASV is 787500uV [ 6.865477] [c6] DEVFREQ(MIF) : 138000Khz, ABB 14 [ 6.871484] [c6] MIF: set ASV freq 825000, voltage 975000 [ 6.876068] [c6] INT 600000Khz ASV is 962500uV [ 6.879978] [c6] DEVFREQ(INT) : 600000Khz, ABB 255 [ 7.886187] [c6] PM DOMAIN: Power off unused power domains. [ 7.890746] [c6] ALSA device list: [ 7.893707] [c6] pd-gscl: Power-off latency exceeded, new value 2982666 ns [ 7.900555] [c6] #0: odroid-audio [ 7.905185] [c6] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 7.911928] [c6] Please append a correct "root=" boot option; here are the available partitions: [ 7.920718] [c6] b300 31276032 mmcblk0 driver: mmcblk [ 7.926411] [c6] b301 1214464 mmcblk0p1 01380d35-01 [ 7.932109] [c6] 0800 488386576 sda driver: sd [ 7.937171] [c6] 0801 488383488 sda1 e72d222d-01 [ 7.942452] [c6] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 7.951107] [c6] CPU: 6 PID: 1 Comm: swapper/0 Not tainted 3.10.104-odroidxu4 #2 [ 7.958480] [c6] Backtrace: [ 7.961353] [c6] [<c0012d00>] (dump_backtrace+0x0/0x114) from [<c0012f70>] (show_stack+0x20/0x24)short:
[ 7.905185] [c6] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 7.911928] [c6] Please append a correct "root=" boot option; here are the available partitions: [ 7.920718] [c6] b300 31276032 mmcblk0 driver: mmcblk [ 7.926411] [c6] b301 1214464 mmcblk0p1 01380d35-01 [ 7.932109] [c6] 0800 488386576 sda driver: sd [ 7.937171] [c6] 0801 488383488 sda1 e72d222d-01 [ 7.942452] [c6] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
-
just an idea:
would we create a subforum of Development for testing reports like Debian/Ubuntuwith sticky stuffOr anything to have an overview for reports/status?
just an idea.
-
I upgraded my r1 to 5.23 version but I have not yet restarted.
In case of problems how do I go back to version 5.20?
Thank you
in case it can help, I have copied the kernels I compile for my L-R1 + a package with older swconfig and/or zip with binary
-
I updated the boot script, though I am not sure why kernel didn't pick up command line from u-boot and whether it is fixed now.
@zador.b.s
your latest updates for XU4/next (uboot 2016.09) are working fine on SD, I will check when possible for legacy
U-Boot 2016.09-armbian (Oct 26 2016 - 01:55:55 +0200) for ODROID-XU3 CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 1725 bytes read in 30 ms (55.7 KiB/s) ## Executing script at 50000000 91 bytes read in 24 ms (2.9 KiB/s) 4524640 bytes read in 337 ms (12.8 MiB/s) 3162080 bytes read in 239 ms (12.6 MiB/s) 54607 bytes read in 52 ms (1 MiB/s) Kernel image @ 0x40800000 [ 0x000000 - 0x450a60 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3162016 Bytes = 3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Ramdisk to 4fcfc000, end 4fffffa0 ... OK Loading Device Tree to 4fceb000, end 4fcfb54e ... OK Starting kernel ... Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.25.2 [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1 /dev/mmcblk1p1: clean, 52734/76960 files, 215874/307712 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. root@odroidxu4:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.8.4-odroidxu4 (root@server1604) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #6 SMP PREEMPT Wed Oct 26 01:56:59 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Hardkernel Odroid XU4 [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xbd200000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xb9000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] On node 0 totalpages: 512512 [ 0.000000] free_area_init_node: node 0, pgdat c0b3a440, node_mem_map eee52000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 315904 pages, LIFO batch:31 [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 14 pages/cpu @eeda9000 s26380 r8192 d22772 u57344 [ 0.000000] pcpu-alloc: s26380 r8192 d22772 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510784 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=30195d3b-da0f-4229-9c70-2956f4974f14 rootfstype=ext4 rootwait earlyprintk panic=10 consoleblank=0 enforcing=0 loglevel=1
edit: for eMMC, the sd_fusing.sh script is needed to wipe out uboot 2012.07 from "boot0" with 2016.09. if not wiped, booting is weird/KO.
-
my TODO list:
1/(from zador.b.s) can you please test default branch on XU4 and report here?Last time command line didn't pass from u-boot to the kernel for some reason.2/looking why u-boot 2016.09 was not compiling.3/checking if 2016.05 can boot legacy kernel4/
adding some documentation
5/ L-R1
https://github.com/igorpecovnik/lib/issues/511#issuecomment-256111716
-
Please provide your /etc/fstab file.
Are you sure the network connexion is properly established when the automounting is started.
-
@zador.blood.stain
1/
ok, pulled 3 files changes. Your UUID architecture is like a charm.
On the 3rd testing, the SDcard was booting & system running (Jessie).
I guess eMMC will be working as well because it was working with root=LABEL=rootfs (to be confirmed yet)
2/ initrd was already implemented and working for XU4 next, so no changes here.
3/ I will be looking when possible about why u-boot 2016.09 was not compiling.Still uboot 2016.05 can be used for both SD/eMMC (huge move from 2012.07)4/ I will check if 2016.05 can boot legacy kernel4/ I will be looking to add some lines of documentationboot details:
U-Boot 2016.05-armbian (Oct 25 2016 - 03:01:42 +0200) for ODROID-XU3 CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Autoboot in 0 seconds, press <ESC> to stop Card did not respond to voltage select! switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 1134 bytes read in 27 ms (41 KiB/s) ## Executing script at 50000000 129 bytes read in 23 ms (4.9 KiB/s) 4524640 bytes read in 335 ms (12.9 MiB/s) 3162130 bytes read in 236 ms (12.8 MiB/s) 54607 bytes read in 54 ms (987.3 KiB/s) Kernel image @ 0x40800000 [ 0x000000 - 0x450a60 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3162066 Bytes = 3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Ramdisk to 4fcfc000, end 4fffffd2 ... OK Loading Device Tree to 4fceb000, end 4fcfb54e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.8.4-odroidxu4 (root@server1604) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #4 SMP PREEMPT Tue Oct 25 03:02:31 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Hardkernel Odroid XU4 [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xbd200000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xb9000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 14 pages/cpu @eeda9000 s26380 r8192 d22772 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510784 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=71796f22-c468-4000-8690-399f030aa396 rootfstype=ext4 rootwait rw earlyprintk
-
This is part of a extra credit assignment for a graduate class I'm taking. I need to build a wheezy image for an arm board and modify the kernel to do something extra, for myself I'm trying to modify the kernel for the XU4 to allow for the use of all 8 cores of the processor. The other reason I would like to have wheezy is when I am done with the assignment I will install open media vault on it to have a fast but small footprint NAS, from what I have read on the OMV page there is no support for Jessie when installing OMV 2.x on top as it only is for testing/ proof of concept.
just a crazy idea
A downgrade from jessie to wheezy
-
please don't be so hard.
Currently the small Armbian team is doing a lot, so much that I just cannot follow. There is a lot of progress and so far quite properly architectured.
The only big issue, the team is too small and barely can communicate properly.
That has led to a huge misunderstanding with zador.blood.stain & I (that I am sorry)
What are your questions?
-
As Igor writes, last time I have tested jessie (& a little bit xenial).
Wheezy/XU4 has been removed from the distro list for a while.
[ o.k. ] Writing U-boot bootloader [ /dev/loop0 ] [ o.k. ] Signing and compressing [ Please wait! ] [ o.k. ] Done building [ /home/gr/gro_armbian/output/images/Armbian_5.21-GRO_Odroidxu4_Debian_jessie_4.8.4.7z [194M] ] [ o.k. ] Runtime [ 39 min ]
-
please, is it useful if I would test MBR/PARTUUID for XU4 (as Zador is thinking of)? (instead of the former LABEL testing I did for SD/eMMC for next)
in case I am on the proper path as of
-
Hello TK,
Understood. Thought about situation with OS X (mounting ext4 with FUSE) and dropped the idea since way too unreliable. On the H3 itself it looks like this (I booted the OPi Plus 2E with an 8GB SD card inserted):
# blkid /dev/mmcblk0p1: UUID="95adb0a1-57d1-41b5-ae03-f9b14605bbdd" TYPE="ext4" PARTUUID="1db0e6fb-01" /dev/mmcblk1p1: UUID="83289bfb-5e48-4ae3-8c20-8557131a06ec" TYPE="ext4" PARTUUID="f88eb67b-01" /dev/mmcblk0: PTUUID="1db0e6fb" PTTYPE="dos" /dev/mmcblk1: PTUUID="f88eb67b" PTTYPE="dos"
Hmm... UUIDs are there but not an easy way to check when flashing is finished to do necessary adjustments before user powers device off. By reading through http://linux-sunxi.org/Bootable_eMMC I thought that it might be the best way to use these special eMMC boot partitions once we know how they work. Then we could do some first boot magic from there I would assume... (same with SPI in case we really get the next batch of Xunlong boards with populated bootable SPI flash)
were the SD & eMMC using GPT or MBR? I am a little lost about PARTUUID which is/was originally dedicated to GPT
OR is there now an option (clean "trick") to identify datas (partition) in the MBR as a PARTUUID?
Zador wasn't clear about this point. Only mentioning about shorter version of PARTUUID
(edit) is it http://www.gossamer-threads.com/lists/linux/kernel/1583540 ?
When reading eMMC spec
- boot0/1 are SLC NAND memory (Odroid size = 4MB)
- rpmb is a security feature mimicking a partition (4MB)
- the remaining of the eMMC is MLC NAND for Samsung (if not TLC or TLC3D for other brands)
the eMMC provided by Odroid was sold with uboot 12.07 on the boot0 partition. boot1 is empty.
uboot 12.07 was switching to mmcblk0 to fetch the initrd / kernel
edit:
uboot 12.07 can be replaced by uboot 16.05 (on boot0) and the XU4 is working fine with a single partition.
eMMC is a standard so I guess the cards will load uboot from boot0 and fetch the kernel on the mmcblk0/1 partition
so:
SD card install: can only use MBR (to keep space for uboot)
eMMC: can use either MBR or GPT as uboot/blobs are on boot0 partion
edit 2:
Since kernel 3.8 and newer it is possible to use MBR 32-bit UUID, so it's possible to use a MBR partition table as well.
In this case PARTUUID refer to an MBR partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-filled hex representation of the 32-bit "NT disk signature", and PP is a zero-filled hex representation of the 1-based partition number.
-
Hello Igor,
We are talking about direct eMMC flash from your PC.
I am not sure it is even possible in general.
At least, the XU4 eMMC, the PC-SD2eMMC converter only displays the /dev/mmcblk0 (& not the other partitions boot0 boot1 rpmb)
And what I have tested so far, you need a kernel with eMMC magement to access all the partitions.
-
The writing process was much slower, at 1MB/s, however this time etcher finished successfully.
Sdcards are very unreliable, however they can sometimes fix themselves, just like old HDD drives could sometimes decide to come back to life.@nz1
Armbian crew advises to buy legitimate Samsung EVO sdcard as reliable (32GB / 8 USD at gearbest)
your story shows the card (or writer) is very low quality but still working when writing @ 1MB/s (which is lesser than "class 2")
-
used win32diskimager, sha256 is correct, sdcard boots, i left it alone for for now to do its work
thank you for your work and if you need anything tested on a cb2just ask, i'm handy with both hw/sw@gTs2
So it is working.
please, just put the main idea in bold if you write a long message (people often wrote me : "make you message quicker, simpler & clearer, it is not a novel")
Just say hello to everbody XU4-beginner
in Odroid XU4
Posted
What do you need to do with the XU4 "gleam ASAP"?