• Content Count

  • Joined

  • Last visited

Posts posted by ledfreak3d

  1. ok all works great now everthing is stable 

    nand-sata-install script runs fine

    but still no boot from emmc


    boot.cmd seems fine

    but fstab file doet not have any location In it

    dos anybody have an example of that file



    UUID=ed0bb37c-e98d-47fd-96d7-25ffc9ef3a7a / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1
    tmpfs /tmp tmpfs defaults,nosuid 0 0
    /var/swap none swap sw 0 0


    root@orangepipc:~# lsblk
    mmcblk1boot0 179:32   0    4M  1 disk
    mmcblk1boot1 179:48   0    4M  1 disk
    mmcblk0      179:0    0 14.9G  0 disk
    └─mmcblk0p1  179:1    0 14.8G  0 part /
    mmcblk1      179:16   0  7.3G  0 disk
    └─mmcblk1p1  179:17   0  7.2G  0 part



    boot.cmd file


    # default values
    setenv load_addr "0x44000000"
    setenv rootdev "/dev/mmcblk1p1"
    setenv verbosity "1"
    setenv console "both"
    setenv disp_mem_reserves "off"
    setenv disp_mode "1920x1080p60"
    setenv rootfstype "ext4"

    # Print boot source
    itest.b *0x28 == 0x00 && echo "Booting from SD"
    itest.b *0x28 == 0x02 && echo "Booting from eMMC or secondary SD"

    if load mmc 0 ${load_addr} /boot/armbianEnv.txt || load mmc 0 ${load_addr} armb$


  2. As always. And with OPi Zero it will get even worse since the Micro USB port there will encourage users to use the crappiest phone 'Chargers' somewhere lying around just to blame Armbian for their PSU troubles. :(

    yep and the funny thing is that I already knew this to start off with

    so they say assumption is the mother of all fuckups I would say measure before you start don't assume any power adaptor rated for 2 amps is capable of doing so  lol

  3. almost


    Last login: Wed Nov 23 18:44:19 2016 from
    root@orangepipc:~# sudo ln -fs /boot/bin/orangepipcplus.bin  /boot/script.bin
    ln: failed to create symbolic link ' /boot/script.bin': No such file or directory


    ok just copied the file manualy as a work around that seem to have done the trick

    script now runs nope hopefully it will complete without errors


    btw this image seems to work a lot beter then the old one

    but still have random disconnects on wifi and lan when connected with putty

    realy anying when you are running the script and it gets disconnected

  4. the log file with sd card inserted


    U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:38:36)
    DRAM: 1024 MiB
    Trying to boot from MMC1

    U-Boot 2016.09-armbian (Sep 15 2016 - 07:38:36 +0200) Allwinner Technology

    CPU:   Allwinner H3 (SUN8I 1680)
    Model: Xunlong Orange Pi PC Plus
    I2C:   ready
    DRAM:  1 GiB
    *** Warning - bad CRC, using default environment

    In:    serial
    Out:   serial
    Err:   serial
    Net:   phy interface0
    eth0: ethernet@1c30000
    Hit any key to stop autoboot:  2 1 0
    switch to partitions #0, OK
    mmc0 is current device
    Scanning mmc 0:1...
    Found U-Boot script /boot/boot.scr
    2789 bytes read in 157 ms (16.6 KiB/s)
    ## Executing script at 43100000
    gpio: pin PL10 (gpio 298) value is 1
    gpio: pin PG11 (gpio 203) value is 1
    59 bytes read in 118 ms (0 Bytes/s)
    ** File not found /boot/.next **
    ** Unrecognized filesystem type **
    ** File not found .next **
    37596 bytes read in 436 ms (84 KiB/s)
    3114592 bytes read in 321 ms (9.3 MiB/s)
    5025168 bytes read in 468 ms (10.2 MiB/s)
    ## Loading init Ramdisk from Legacy Image at 43300000 ...
       Image Name:   uInitrd
       Image Type:   ARM Linux RAMDisk Image (gzip compressed)
       Data Size:    3114528 Bytes = 3 MiB
       Load Address: 00000000
       Entry Point:  00000000
       Verifying Checksum ... OK
    Using machid 0x1029 from environment

    Starting kernel ...

    [sun8i_fixup]: From boot, get meminfo:

     Start: 0x40000000

     Size: 1024MB

    ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1

    ion_reserve_select: ion chipid  [0x2004620!

    ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!

  5. humz ok that did not work for me

    but it seems there is also a new kernel and the file located in


    usr/lib/linux-u-boot-orangepipcplus_5.23_armhf  is 5.23 instead of 5.20


    dd if=/usr/lib/linux-u-boot-orangepipcplus_5.23_armhf/u-boot-sunxi-with-spl.bin of=/dev/mmcblk2 bs=1024 seek=8

    the copy was succesfull but still no boot from emmc

    maybe eter to do it before anything is updated ;)

  6. Hi guys


    I am having some issues with booting from emmc


    created a  sdcard with th latest armbian version for the orange pi pc plus

    can boot it without problems


    updated and upgraded everything.

    then ran nand-sata-install all seems to be going ok but after that it wont boot from emmc without sd card inserted


    I am pretty sure I am missing something obvious  lol


    any help with be greatly appreciated