Jump to content


  • Posts

  • Joined

  • Last visited

Reputation Activity

  1. Like
    peter12 reacted to Igor in Why copying to eMMC takes so long? 30min instead of 7 min   
    Sure, but implemented solution would help us all.
  2. Like
    peter12 reacted to olivluca in camera for Orange Pi Zero 2Plus   
    I don't know if the CSI connector on the pi zero plus 2 is the same as the pi pc, it seems so but one never knows.
    OTOH the gc2035 driver in armbian has several issues (search the forum for gc2035). I'm using an older version of the driver (which has a different set of issues but it works better here).
  3. Like
    peter12 got a reaction from Larry Bank in TV out lower resolution   
    H there, 
    I am using OPi0 TV out. I know, there are hardcoded PAL and NTSC resolutions only. But I would like to ask, if there is any tutorial how to build it up with my own lower resolution e.g. 320x240? (i know I should recompile driver for it but any help where to start is appreciated)
    Many thanks.
  4. Like
    peter12 reacted to Igor in 5.34 release   
    Due - which was set 4 months ago - is approximately next week. The easiest thing is running buildall.sh script at the due date but nobody would be happy with the outcome

    If you only want to try out, check nightly builds. We plan to rebuild what is stable, while the rest will be put out as automated testing build ... since not ready yet. 
  5. Like
    peter12 got a reaction from chwe in Clone/backup bootable microsd card - make as small as possible image   
    Hi there, this very short tutorial is a solution when you need to backup/clone/save as small *.img file as possible of your whole fully bootable system (e.g. you have 8GB card but you want to make smaller system image for 2GB card). And another reason why I created this tutorial - I need to burn the same image to many microsd cards.
    I am using Windows (yup, hate me know)  and Debian in these steps:
    Put your microsd card to Windows machine and make image of card with Win32diskimager. If your card is e.g. 8GB, you get *.img file with the same size (my name backup.img). Now in linux maxine (in my case Debian virtual machine) we are going to work with backup.img file. Run these commands in terminal (if you are not root use sudo at the start of each line) modprobe loop losetup -f losetup /dev/loop0 backup.img partprobe /dev/loop0  
    Run gparted with this command and move slider of main partition to the left to make partition smaller (leave some space, e.g. I left 400MB free space)
    gparted /dev/loop0 Click on Apply once you are happy with it.
    We can unload loopback device now
    losetup -d /dev/loop0  
    With fdisk find out end of last block
    fdisk -l backup.img   
     In my case last block is 3571711 so I run command 
    truncate --size=$[(3571711+1)*512] backup.img  
    Done! Size of your backup.img file should be now about 1.5GB.
    You can burn this new backup.img file to another (or the same) card/s now. In my case I dramatically reduced time needed for burning data to many many cards (it saves hours/days when you need to burn a lot of microsd cards). Enjoy!
    P.S. this can be done also with just Debian, so no need for Windows, in this case you just need to make first step with backup.img with linux command (e.g. dd). And of course you can set up a script on your newly burned card to expand system partition to the whole microsd size during first boot, if needed. 
  6. Like
    peter12 got a reaction from Igor in stk1160 identified but not as /dev/video0   
    Hi there, I went through Igor's release and it is now identifing my usb syntek as /dev/video0. Thank you for help!
  • Create New...