Jump to content

kris777

Members
  • Posts

    36
  • Joined

  • Last visited

Everything posted by kris777

  1. After a week of checking, the server on HC1 works perfect 🙂 the nand-sata-install install option helped ! thank you for this option on Armbian!
  2. I did it with a tool built into the Armbian system ... the system has been moved to the sda1 partition, so far it works OK. nand-sata-install There is also a possibility that something is wrong with the hardware, maybe HC1 / power supply, etc., I have to look for.
  3. Is it possible to transfer the entire Armbian system from SD card to HDD? ... it is known that the SD card has a lower endurance than such a HDD dist (write, read etc.) I tried to transfer the system in such a way that I first upgraded the kernel to the newest one on the SD card and then moved the system files to a partition on the HDD: mount /dev/sda1 /mnt time tar --one-file-system -cpf - / | (cd /mnt && tar -xpf -) then knowing the sda1 partition information and ID lsblk -f then knowing the sda1 partition information and ID I changed the UUID / HDD number in two locations nano /boot/boot.ini and nano /etc/fstab after rebooting the system ... surprisingly it works OK, but actually the samba / ftp network (server vsftpd). The update also seems to work OK, i.e. apt update / apt upgrade ... However, there are programs that cause the Armbian system to stop working completely, eg transmission when downloading files to the HDD? ... restarting the system helps, but is it the fault of the transmission program itself copied from the SD card or maybe the Armbian system cannot work properly on the HDD? ... or maybe something else needs to be done to correctly transfer the system from the SD card to the HDD? if I restore the settings and boot from the SD card, Armbian / transmission / download works OK? I haven't checked the option of uninstalling transmission from the system to HDD yet and setting everything up again ... but will it help?
  4. In the Armbian system, I made such commands and the size of the image file saved on the miniSD was matched to the original size of the card :-) sudo systemctl enable resize2fs sudo update-rc.d resize2fs defaults  sudo reboot or poweroff /etc/init.d/resize2fs start
  5. with me the program has reduced the image from 30GB to 2.1GB ... great Theoretically, I can now burn the image onto a 3GB / ... 8GB e.t.c mini SDHC ! but the program Pishrink creates a minimal image .img ... that is, as much as there is data on it without a record what if we will install many programs in the future, etc. does not include free space for writing ...exceeding eg 2GB can not we determine the size of the created image ourselves ?
  6. On a Linux system, you can backup this way ... and then reduce the image and burn to a different SD card .... I'm sorry but howto in Polish : clone SD
  7. it probably does not work https://forum.odroid.com/viewtopic.php?f=97&t=29069&p=211534#p211534 but the fix script works
  8. thanks @tkaiser for the hint and link ... I will definitely check ! But it's finally a new odroid HC1 . Not my six-year-old laptop ... in which I exchanged thermal grease :-) but thanks for the info ... Ps. but if the above equipment works nonstop eg Seedbox / FTP / Samba ...this temperature can be the norm ? How much will the SD card withstand if I use it in this way? :-) I will have to install the system on HDD / SATA ... if it can be done? .... for now, I have changed the processor speed to max 1400 / update JMS578 firmware ! regards .... thanks a lot !
  9. I also thought about additional cooling ...but for me the temperature is in the range 59 C - 69 C and finally I gave up and it's OK for now . But maybe I can find a solution on the internet additional aluminum / copper radiotor or fan? :-) a little high this temperature ? regards!
  10. Thanks for the review .... Armbian installed on Odroid HC1 and it works OK :-) Regards
  11. Orange Pi Zero Plus (H5 / 1000M ethernet ) Is a working Armbian system ? ..... It's probably new :-)
  12. I have two Orange Pi lite .... which work 24 hours non stop I switched off and switched on the wifi network several times in the router option Always re-connected to the WiFi network to Orange Pilite automatically I restarted the router several times with similar effect
  13. Maybe this way for raspberry pi will be helpful .....(raspbian) How do I reset a USB device using a script? https://gist.github.com/x2q/5124616
  14. So, the direct connection of the LCD with GPIO also requires a level shifter ... (Logic Level Converter 3.3 / 5V) ...? e.g : http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=1389
  15. I also had this result until we changed the order of the cables : SDA / SCL i2cdetect -y 0 i2cdetect -y 1 Look here: i2c--smbus-and-armbian-linux i2c interface on orange pi lite Orange Pi I2C orange pi / I2C / LCD 2x16 / internetradio Lcdproc also works .... but it requires compiling under the driver: hd44780 hd44780.so-Armbian-5.25-Ubuntu-xenial-3.4.11 Or your own compilation according to this howto https://bbs.nextthing.co/t/lcdproc-with-20-character-by-4-line-lcd/8789
  16. You make strange conclusions.... Some believe that all Orange Pi is just cheap gadgets So for the cheap gadget I plug in another cheap gadget :-) I repeat my fix works and rather refers to the software......Armbian ? Ps. I connected this sound card under another system linux /laptop samsung R780 / HTPC - Mobo AT5IONT-I And disabled / restarted the system 7 times.... Has always been detected correctly .... ( LinuxMint 18 Sarah / LibreElec ) Linux kris-samsung 4.4.0-64-generic #85-Ubuntu SMP Mon Feb 20 11:50:30 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Linux LibreELEC 4.4.13 #1 SMP Sat Dec 17 17:25:59 CET 2016 x86_64 GNU/Linux Oh..... these cheap gadgets ... OrangePi ? ... Armbian ? .. :-) ......
  17. Weird but i used a 3 port hub without power lsusb Bus 003 Device 002: ID 14cd:8601 Super Top And I no longer see the problem? .... only the direct connection of this sound card gives this effect :-)
  18. Read carefully my posts above ..... This issue is only added to this model of this version : 0d8c:013c C-Media Electronics, Inc. CM108 I have two new Orange Pi Lite + two different power supplies + Two new usb sound cards This fix works for me :-) Maybe this is an mpd /mpc/pulseaudio / alsa .... configuration error ? If the card is not detected ....Just by ssh, issue the command: lsusb -v .... The card works OK again ? ... regards!
  19. I have no idea why that is so But i knew a small fix that works for me The lsusb -v command is helpful :-) .... ??? Just a script with content: usb-card.sh #! /bin/sh sleep 30 lsusb -v The script starts with a file: rc.local /bin/sh /root/usb-card.sh &
  20. This is probably the only fault of this model : 0d8c:013c C-Media Electronics, Inc. CM108 I have another company but the sound is strangely cracking sound ? .... but on this problem does not exist is always detected lsusb:Bus 007 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter I got rid of this card :-) The other one is always properly detected but the sound is not good for me ??? Bus 007 Device 018: ID 0c76: 1607 JMTek, LLC. Audio controller Ps. The Orange Pi Lite is also connected to a 16x2 LCD ( internetradio )
  21. It's rather impossible ..... Because I have two power supplies One standard from the manufacturer (aliexpress) Second brand: Sunny INPUT:100-240V 1.0A OUTPUT:5V --- 4.0A OUTPUT POWER: 20W MAX http://sprunge.us/TbNh
  22. I have an external audio card connected to usb lsusb Bus 007 Device 014: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller I have a problem that after rebooting the system ... Once it is detected and another time it is not :-( dmesg|tail [ 40.820066] usb 7-1: device descriptor read/64, error -62 [ 41.110045] usb 7-1: device descriptor read/64, error -62 [ 41.400108] usb 7-1: new full-speed USB device number 11 using sunxi-ohci [ 41.580056] usb 7-1: device descriptor read/64, error -62 [ 41.870068] usb 7-1: device descriptor read/64, error -62 [ 42.150067] usb 7-1: new full-speed USB device number 12 using sunxi-ohci [ 42.570119] usb 7-1: device not accepting address 12, error -62 [ 42.750064] usb 7-1: new full-speed USB device number 13 using sunxi-ohci [ 43.170071] usb 7-1: device not accepting address 13, error -62 [ 43.176856] hub 7-0:1.0: unable to enumerate USB device on port 1 I observed that after some time itself connected ....About 5 - 30 min ? :-) dmesg The situation is repeated for two identical sound cards on two Same Armbian system : and Orange Pi Lite ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i Linux orangepilite 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l armv7l armv7l GNU/Linux Is not that a kernel bug ?
  23. See here ... (Attention ...Is differen on RPI) https://linux-sunxi.org/Orange_Pi_Lite
  24. I have Orange Pi lite / ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i And after the lsmod command: Module Size Used by mali_drm 2732 1 drm 178255 2 mali_drm pcf8591 3363 0 bmp085 3487 0 mali 123146 0 ump 29379 3 mali ir_lirc_codec 3650 3 lirc_dev 7834 1 ir_lirc_codec ir_mce_kbd_decoder 2885 0 snd_usb_audio 80352 2 ir_sanyo_decoder 1480 0 snd_hwdep 5562 1 snd_usb_audio ir_sony_decoder 1422 0 snd_usbmidi_lib 17545 1 snd_usb_audio snd_seq_midi 4215 0 snd_seq_midi_event 5340 1 snd_seq_midi ir_jvc_decoder 1452 0 ir_rc6_decoder 1941 0 snd_rawmidi 17134 2 snd_usbmidi_lib,snd_seq_midi ir_rc5_decoder 1412 0 ir_nec_decoder 1556 0 g_serial 27617 2 sunxi_cir 1601 0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines