Jump to content

nepo

Members
  • Posts

    30
  • Joined

  • Last visited

Everything posted by nepo

  1. hi Unfortunately no solutions for my udev-problem, but a small workaround to implement my external hard disks. Mount with fstab and nofail option fstab In my case UUID=xxxxxxxxxxxx /mnt/mountpoint ext4 nofail,x-systemd.device-timeout=1,rw,auto,users 0 0 To unmount correctly if unplugged I use an udev-rule orangepi@orangepiplus2e:~$ cat /etc/udev/rules.d/90-USB_festplatten.rules ACTION=="remove", KERNEL=="sd?1", ENV{ID_SERIAL_SHORT}=="33Q8K5YEF", RUN+="/bin/umount /mnt/mountpoint" bye
  2. hi I have upgraded my SD-version Armbian_5.65_Orangepiplus2e_Ubuntu_xenial_default_3.4.11 to mainline aka 4.14.70 Armbian 5.60 et voila the system mount my harddisk. It seems not to be a problem with the mainline-kernel. So, Where are the differences ? xenial vs bionic or/and Armbian 5.60 vs Armbian_5.65 bye
  3. hi orangepi 2e+ with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi syslog I want to mount my external hard disks with cat /etc/udev/rules.d/91-intenso.rules KERNEL=="sd?1", SUBSYSTEMS=="usb", ATTRS{serial}=="31700000000000007023", SYMLINK+="Intenso", ACTION=="add", RUN+="/bin/mount /dev/Intenso /mnt/Intenso" Normally no problem, tested with Armbian_5.65_Orangepiplus2e_Ubuntu_xenial_default_3.4.113 and Workstation PC Linux 4.15.0-43-generic #46~16.04.1-Ubuntu. With my current version, I have a problem. The udev-rule is/seem ok LINK 'Intenso' /etc/udev/rules.d/91-intenso.rules:1 RUN '/bin/mount /dev/Intenso /mnt/Intenso' /etc/udev/rules.d/91-intenso.rules:1 But orangepi@orangepiplus2e:~$ ls /mnt/Intenso/ orangepi@orangepiplus2e:~$ But If I mount manually orangepi@orangepiplus2e:~$ sudo mount /dev/Intenso /mnt/Intenso/ orangepi@orangepiplus2e:~$ ls /mnt/Intenso/ Filme FRITZ lost+found Musik recup_dir.86 Serien Where is my fault ? Bye nepo
  4. hi SORRY !!! A stupid accident : At the same time as I configured lirc my external hard drive goes broken (perhaps a correlation). Without hard drive and mount points in fstab the system starts normal. Bye
  5. hi Orangepi plus 2e; Armbian 5,38 with Ubuntu xenial 16.4 Normally my OrangePi works pretty fine, but today I tested lirc. I activated lirc by armbian-config, changed something in /etc/lirc/hardware.conf and now my Orangepi don't started correctly - Stopping with Starting Kernel ... What I can Do ? I can start my system with a SD-card, and mount the hole emmc-content. It is possible to diable lirc only by remove/edit a (config-)file ? Bye nepo
  6. hi I have tested and read a lot of tutorials, but nothing works - I can't used rtcwake for wakeevents! but the rtc-modul ds3231 works Can I use my Orange Pi +2e with DS3231 to wake up ? Anybody has success ? And why I have not a /proc/driver/rtc ? With my Raspberry 3 and rtc-ds3231 it exist. Bye nepo!
  7. Hi Igor Thank you for this tutorial - and it works I want to use rtcwake, but What must I do to use rtcwake ? Bye nepo!
  8. hi zador thanks for reply ! How to activate the driver or it's a mainline issue ?
  9. I know that Or to put it another way: No governor means the cpu run in highest level and can be damaged?
  10. hi orangepi+2e : ARMBIAN 5.32 user-built Debian GNU/Linux 8 (jessie) 4.13.2-sunxi (no changes) armbianmonitor -u Perhaps I've the the same problem: I've tried to load the cpufreq driver orangepi@orangepiplus2e:~$ cat /etc/modules #8189fs arm_big_little arm_big_little_dt But nothing happens. What does it mean ? No risk for my Pi ? ciao nepo
  11. It doesn't work Is the helper-service necessary ? Without rpimonitor runs and hard drive spin down.
  12. hi Services rpimonitor and rpimonitor-helper.service runs but no information in /tmp/disktemp nor /tmp/externaltemp (the files exists), also by editing to the orig. conf-files. sudo hdparm /dev/sda /dev/sda: multcount = 16 (on) readonly = 0 (off) readahead = 256 (on) geometry = 60801/255/63, sectors = 976773168, start = 0 sudo hdparm -I /dev/sda1 /dev/sda1: ATA device, with non-removable media Model Number: TOSHIBA MQ01UBD050 Serial Number: 54R5TCLYT Firmware Revision: AX001U Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6 Standards: Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 976773168 Logical Sector size: 512 bytes Physical Sector size: 4096 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 476940 MBytes device size with M = 1000*1000: 500107 MBytes (500 GB) cache/buffer size = 8192 KBytes Form Factor: 2.5 inch Nominal Media Rotation Rate: 5400 Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 254 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * Idle-Unload when NCQ is active DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Write Same (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 112min for SECURITY ERASE UNIT. 112min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 0000000000000000 NAA : 0 IEEE OUI : 000000 Unique ID : 000000000 Checksum: correct
  13. Hi orange pi +2e with Distribution: Ubuntu 16.04.2 LTS Kernel version: Linux 3.4.113-sun8i armv7l rpimonitor installed with sudo armbianmonitor -r I use Rpimonitor to control temperature, upgradable packages and cpu frequency, nice tool ! Unfortunately it looks that rpimonitor has access to my external external hard drives, so no spin off . I change rpimonitor config files sudo nano /etc/rpimonitor/data.conf #include=/etc/rpimonitor/template/sdcard.conf and sudo nano /etc/rpimonitor/template/Allwinner_H3_Extended_Mainline.conf #dynamic.7.name=externaltemp #dynamic.7.source=/tmp/externaltemp #dynamic.7.regexp=(.*) #dynamic.7.postprocess=sprintf("%.1f", $1/1000) #dynamic.7.rrd=GAUGE #dynamic.8.name=disktemp #dynamic.8.source=/tmp/disktemp #dynamic.8.regexp=(.*) #dynamic.8.postprocess=sprintf("%.1f", $1/1000) #dynamic.8.rrd=GAUGE But no success Only if I stoped rpimonitor service, my hard disks spin off. Can anybody help Bye nepo @edit: With only armbianmonitor -m no problems
  14. hi again new image compile without rc_core. compile media_built and install -> no errors reboot and plugin the stick -> no kernel Panic But: dmesg new high-speed USB device number 3 using ehci-platform [ 2512.085372] usb 4-1: New USB device found, idVendor=15f4, idProduct=0131 [ 2512.085389] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2512.085399] usb 4-1: Product: dvbt2 [ 2512.085410] usb 4-1: Manufacturer: astrometadvbt2 [ 2512.109067] media: exports duplicate symbol __media_device_register (owned by kernel) [ 2512.205549] media: exports duplicate symbol __media_device_register (owned by kernel) dmesg | grep -i dvb only and no adapter in /dev/ 4.520298] usb 4-1: Product: dvbt2 [ 4.520303] usb 4-1: Manufacturer: astrometadvbt2 [ 2512.085399] usb 4-1: Product: dvbt2 [ 2512.085410] usb 4-1: Manufacturer: astrometadvbt2 armbianmonitor lsmod Module Size Used by bluetooth 263753 0 cfg80211 192770 0 rfkill 10928 3 bluetooth,cfg80211 realtek 2818 1 evdev 9979 0 ir_lirc_codec 4502 0 lirc_dev 8387 1 ir_lirc_codec sun4i_codec 28243 3 sun8i_codec_analog 13766 1 sunxi_cir 3825 0 snd_soc_core 115473 2 sun4i_codec,sun8i_codec_analog snd_pcm_dmaengine 4221 1 snd_soc_core snd_pcm 70145 2 snd_pcm_dmaengine,snd_soc_core sun8i_ths 3134 0 uio_pdrv_genirq 3354 0 cpufreq_dt 3522 0 uio 8012 1 uio_pdrv_genirq gpio_keys 8517 0 thermal_sys 43232 2 cpufreq_dt,sun8i_ths 8189fs 826413 0 fuse 70718 1 so I look at this page and try orangepi@orangepiplus2e:~/media_build$ sudo make unload [sudo] password for orangepi: make -C /home/orangepi/media_build/v4l unload make[1]: Entering directory '/home/orangepi/media_build/v4l' scripts/rmmod.pl unload found 575 modules /sbin/rmmod ir_lirc_codec Pulseaudio is running with UUID(s): /sbin/rmmod lirc_dev make[1]: Leaving directory '/home/orangepi/media_build/v4l'orangepi@orangepiplus2e:~/media_build$ sudo modprobe -a rtl2832_sdr videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core mn88473 rtl2832 dvb_usb_rtl28xxu modprobe: ERROR: could not insert 'rtl2832_sdr': Exec format error modprobe: ERROR: could not insert 'videobuf2_v4l2': Exec format error modprobe: ERROR: could not insert 'videobuf2_core': Exec format error modprobe: ERROR: could not insert 'mn88473': Exec format error modprobe: ERROR: could not insert 'rtl2832': Exec format error modprobe: ERROR: could not insert 'dvb_usb_rtl28xxu': Exec format error reboot The same problem. Also I try (found no *.ko.gz files) sudo make reload sudo depmod -a Nothing ! What can i do else
  15. hi I don't want to give up, also next attempt. Fresh image Armbian_5.27_Orangepiplus2e_Debian_jessie_dev_4.10.3 (april 5) with no kernel config Install media-build with git clone git://linuxtv.org/media_build.git cd media_build ./build No errors! reboot and sudo make unload, plug in usb-stick Kernel Panic usb 4-1: new high-speed USB device number 2 using ehci-platform [10756.489835] usb 4-1: New USB device found, idVendor=15f4, idProduct=0131 [10756.489851] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10756.489861] usb 4-1: Product: dvbt2 [10756.489872] usb 4-1: Manufacturer: astrometadvbt2 [10756.523013] Unable to handle kernel NULL pointer dereference at virtual address 00000080 [10756.531707] pgd = ecdf4000 [10756.534598] [00000080] *pgd=00000000 [10756.548898] Internal error: Oops: 805 [#1] SMP THUMB2 [10756.564493] Modules linked in: dvb_usb_rtl28xxu(O+) ir_xmp_decoder(O) cfg80211 bluetooth rfkill evdev realtek sun8i_codec_analog sunxi_cir sun4i_codec snd_soc_core snd_pcm_dmaengine snd_pcm sun8i_ths gpio_keys cpufreq_dt thermal_sys uio_pdrv_genirq uio 8189fs [last unloaded: lirc_dev] [10756.632763] CPU: 0 PID: 5294 Comm: systemd-udevd Tainted: G O 4.10.3-sun8i #7 [10756.662661] Hardware name: Allwinner sun8i Family [10756.678351] task: ed5e3900 task.stack: edece000 [10756.693727] PC is at rtl28xxu_identify_state+0x37/0x68 [dvb_usb_rtl28xxu] [10756.711399] LR is at rtl28xxu_ctrl_msg+0xb6/0xcc [dvb_usb_rtl28xxu] [10756.728414] pc : [<bfa6215c>] lr : [<bfa6210f>] psr: 00070033 sp : edecfcc0 ip : 00000000 fp : ed64be00 [10756.761072] r10: bfa64064 r9 : ed64be00 r8 : bfa64b7c [10756.776655] r7 : ece6d000 r6 : 00000000 r5 : ecc6c000 r4 : 00000000 [10756.793479] r3 : 00000002 r2 : 00000000 r1 : 00000000 r0 : 00000000 [10756.810074] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none [10756.827485] Control: 50c5387d Table: 6cdf406a DAC: 00000051 [10756.843230] Process systemd-udevd (pid: 5294, stack limit = 0xedece210) [10756.859858] Stack: (0xedecfcc0 to 0xeded0000) [10756.874058] fcc0: bfa640b8 06000020 00000000 00000000 bfa640b8 ecc6c000 ece6d070 c05ae8a3 [10756.901816] fce0: eda6ca00 00000000 00000000 00000000 00000001 ece6d070 ece6d0e4 00000004 [10756.929671] fd00: 400e0013 bfa64b7c 00000000 c04d2091 0000000a ed64be20 00000000 ece6d070 [10756.957617] fd20: ece6d000 bfa64b7c ed64be00 bfa64064 ffffffed c05500ab c054ffed ed64be20 [10756.985657] fd40: c0b9bc50 00000000 00000000 bfa64b7c 0000002e ed965a24 00000124 c04cb46b [10757.013735] fd60: 00000000 ed64be20 bfa64b7c ed64be54 c04cb4e1 bfa64c00 ed965a00 c04cb545 [10757.042541] fd80: 00000001 00000000 bfa64b7c c04ca2c5 ee594158 ed8d5ab4 00000000 bfa64b7c [10757.071946] fda0: ecdd6900 00000000 c0b43418 c04cad4b bfa64688 bfa64b7c c0b43418 bfa64b7c [10757.101332] fdc0: c0b43418 c054ffed bfa64b7c c04cbab9 bfa64688 bfa64b48 c0b43418 c054f3bd [10757.130721] fde0: ffffe000 bfa64c00 bfa68001 00000000 00000001 c01016b7 8040003f 014000c0 [10757.160426] fe00: ecc6c018 bfa64c48 00000000 c0b25b2c 8040003e 00000001 ee401e40 edecfe38 [10757.190668] fe20: 00000001 ee401e40 edecfe38 00000001 ee401e40 edecfe50 bfa64c00 bfa64c00 [10757.221303] fe40: bfa64c00 bfa64c00 00000001 ed662500 00000001 c0198fb9 ed965a00 edecff54 [10757.252474] fe60: bfa64c00 edecff54 bfa64c00 00000001 ed965a00 c0173011 bfa64c0c 00007fff [10757.284414] fe80: bfa64c00 c01712b9 00000000 bfa64c00 bfa64c48 edecff54 bfa64c0c f17b3c38 [10757.316720] fea0: bfa64c0c c0702e0c c08946c0 c0894724 c08946cc bfa64dbc 00000000 00006c88 [10757.349271] fec0: 00000000 edecff48 00006c88 00000000 00000000 00000000 00000000 00000000 [10757.382033] fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [10757.414801] ff00: 00000000 00000000 7fffffff 00000000 f17ad000 b6e3d63c 0000017b c0106024 [10757.444261] ff20: edece000 00000000 00000000 c01734c9 7fffffff 00000000 00000003 00000000 [10757.466896] ff40: 00000000 f17ad000 00006c88 00000000 00000000 f17ad000 00006c88 f17b3738 [10757.489527] ff60: f17b35e4 f17b17e8 00002e04 00003894 00000000 00000000 00000000 00001f90 [10757.512156] ff80: 00000020 00000021 00000017 00000000 00000010 00000000 7f68c058 7f680b0c [10757.534782] ffa0: b0411d00 c0105e61 7f68c058 7f680b0c 00000007 b6e3d63c 00000000 b6e3e0a4 [10757.557413] ffc0: 7f68c058 7f680b0c b0411d00 0000017b 00020000 7f680b0c 7f692448 00000000 [10757.580044] ffe0: be9ef8e8 be9ef8d8 b6e378ff b6d89572 800e0030 00000007 ffffffff ffffffff [10757.602723] [<bfa6215c>] (rtl28xxu_identify_state [dvb_usb_rtl28xxu]) from [<c05ae8a3>] (dvb_usbv2_probe+0xb7/0x838) [10757.627812] [<c05ae8a3>] (dvb_usbv2_probe) from [<c05500ab>] (usb_probe_interface+0xbf/0x1bc) [10757.650865] [<c05500ab>] (usb_probe_interface) from [<c04cb46b>] (driver_probe_device+0x16b/0x1e0) [10757.674383] [<c04cb46b>] (driver_probe_device) from [<c04cb545>] (__driver_attach+0x65/0x68) [10757.697392] [<c04cb545>] (__driver_attach) from [<c04ca2c5>] (bus_for_each_dev+0x39/0x58) [10757.720155] [<c04ca2c5>] (bus_for_each_dev) from [<c04cad4b>] (bus_add_driver+0xab/0x164) [10757.742940] [<c04cad4b>] (bus_add_driver) from [<c04cbab9>] (driver_register+0x31/0x84) [10757.765568] [<c04cbab9>] (driver_register) from [<c054f3bd>] (usb_register_driver+0x51/0xdc) [10757.789677] [<c054f3bd>] (usb_register_driver) from [<c01016b7>] (do_one_initcall+0x2f/0xfc) [10757.812826] [<c01016b7>] (do_one_initcall) from [<c0198fb9>] (do_init_module+0x45/0x314) [10757.835625] [<c0198fb9>] (do_init_module) from [<c0173011>] (load_module+0x1461/0x17ac) [10757.858355] [<c0173011>] (load_module) from [<c01734c9>] (SyS_finit_module+0x65/0x70) [10757.880927] [<c01734c9>] (SyS_finit_module) from [<c0105e61>] (ret_fast_syscall+0x1/0x4c) [10757.903873] Code: d004 4604 b958 2302 (f886) 3080 [10757.916134] ---[ end trace 4885c4e9b24281a6 ]--- dmesq dvb and whole dmesg.txt and armhwinfo.log orangepi@orangepiplus2e:~/media_build$ dmesg |grep -i dvb [10756.489861] usb 4-1: Product: dvbt2 [10756.489872] usb 4-1: Manufacturer: astrometadvbt2 [10756.564493] Modules linked in: dvb_usb_rtl28xxu(O+) ir_xmp_decoder(O) cfg80211 bluetooth rfkill evdev realtek sun8i_codec_analog sunxi_cir sun4i_codec snd_soc_core snd_pcm_dmaengine snd_pcm sun8i_ths gpio_keys cpufreq_dt thermal_sys uio_pdrv_genirq uio 8189fs [last unloaded: lirc_dev] [10756.693727] PC is at rtl28xxu_identify_state+0x37/0x68 [dvb_usb_rtl28xxu] [10756.711399] LR is at rtl28xxu_ctrl_msg+0xb6/0xcc [dvb_usb_rtl28xxu] [10757.602723] [<bfa6215c>] (rtl28xxu_identify_state [dvb_usb_rtl28xxu]) from [<c05ae8a3>] (dvb_usbv2_probe+0xb7/0x838) [10757.627812] [<c05ae8a3>] (dvb_usbv2_probe) from [<c05500ab>] (usb_probe_interface+0xbf/0x1bc) No modul for mn88743 and ls /dev/dvb ls: cannot access '/dev/dvb': No such file or directory make reload orangepi@orangepiplus2e:~/media_build$ sudo make reload rmmod: ERROR: Module dvb_usb_rtl28xxu is in use . . insmod: ERROR: could not load module ./dvb_usb_az6027.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_opera.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_digitv.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_dw2102.ko: No such file or directory insmod: ERROR: could not insert module ./cpia2.ko: Cannot allocate memory insmod: ERROR: could not load module ./sony_btf_mpx.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_ttusb2.ko: No such file or directory insmod: ERROR: could not insert module ./saa7115.ko: Cannot allocate memory insmod: ERROR: could not insert module ./cx25840.ko: Cannot allocate memory insmod: ERROR: could not insert module ./tvp5150.ko: Cannot allocate memory insmod: ERROR: could not insert module ./adv7842.ko: Cannot allocate memory insmod: ERROR: could not insert module ./smiapp.ko: Cannot allocate memory insmod: ERROR: could not insert module ./cx2341x.ko: Cannot allocate memory insmod: ERROR: could not insert module ./tvaudio.ko: Cannot allocate memory insmod: ERROR: could not load module ./dvb_usb_technisat_usb2.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_mxl111sf.ko: No such file or directory . . . insmod: ERROR: could not load module ./dvb_usb_a800.ko: No such file or directory insmod: ERROR: could not insert module ./mt9t031.ko: Cannot allocate memory insmod: ERROR: could not insert module ./ov5642.ko: Cannot allocate memory insmod: ERROR: could not load module ./go7007_usb.ko: No such file or directory insmod: ERROR: could not load module ./cx231xx_alsa.ko: No such file or directory insmod: ERROR: could not load module ./dvb_usb_dibusb_mc.ko: No such file or directory insmod: ERROR: could not insert module ./mt9m001.ko: Cannot allocate memory insmod: ERROR: could not load module ./xilinx_tpg.ko: No such file or directory . . What I can do ??? Please help and Ciao nepo
  16. I don't know. I didn't use T230C , because dvb-c support is bad, in 4.10 as well as 4.4 (RPI), so I could not tested really, I read some post about it., with my Astrometa-Dongle and 4.4.5 perfect, recordings (mpeg2) with ProjectX no error ... and with 4.10.3 only problems - live and recordings. I will go every way , but I can't go myself (noob)
  17. Thanks for help, but I understand nothing. At moment, I try another thing. Perhaps (hopefully) I make a mistake by compiling the image. In this post idandavidi used a t230c stick and funnily I have such stick somewhere. So, I'm not sure, idandavidi used kernel 3.4 like me and my orangepi don't recognize the stick t230. I believe, that means i make a mistake by building the image. Perhaps anybody can find the error dmesq_t230c.txt linux-sun8i-default.config Ciao
  18. Bad news If anybody knows, how I can use the orangepi with the stick, please help me. I tested this stick with kernel 4.10.3 (native recognize), but with horrible output link, and so I want to compile another kernel e.g. 4.8 but I'm a noob see . Thanks for help see you
  19. hi thanks for answer! I'm a noob, but my RPI runs with kernel 4.4.50-v7+ and I remember I could compile the v4l driver I will test it again. usb 1-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... usb 1-1.3: DVB: registering adapter 0 frontend 1 (Panasonic MN88473)... I need only dvb-c -> mn88473 It is possible to compile without rtl2832 ? edit: v4l compile with kernel 4.4.50 link
  20. Hi I want to install a tv-server (vdr) on my orangepi with a usb-dvb-stick from astrometa. I read this post and try to reproduce it. I build my own image ARMBIAN 5.27 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i (linux-sun8i-default.config )and install v4l driver with no errors. Unfortunately it don't work. The system don't recognize the stick (see file orangepi_Astrometa.txt and dmesq_media_build.txt ). Useful for comparison my raspberrypi with the stick (raspberry_Astrometa.txt) . Can anybody help? Ciao nepo
  21. Thank You for your help, but I will give up - that beats me Again, thank you for your whole work
  22. I will try it. Change configuration.sh in Right ? And like this post How I can disable patches - in configuration files or during the process of compile (configure kernel)
  23. Thanks for fast answer 4.4.50 is only an example, higher untill 4.8
  24. hello again I tested this image Armbian_5.27_Orangepiplus2e_Debian_jessie_dev_4.10.3, everything ok only the Tv-Output. I have the same problem to fit this description : That build was the first one that used the new 4.9.0 kernel. I noticed a somewhat rare, intermittent video corruption when watching 1080i h.264 TV channels - usually a flash of green artifacts. Those video artifacts appear once in 5-10 minutes (sometimes more frequent). (I use it as tvserver with RPI3 (Raspian Jessie and Kodi) as client. So I want to try another kernel. I read this post and I insert in my compile.sh KERNELTAG="v4.4.58" Of course, nothing happen, still the same kernel 4.10.3. so I read your documentation about patches , kernel configs and ..., but I understand nothing (not at all) . I'm "only" a user - copy and paste try and error. Can I build a kernel e.g. v4.4.50 (like my raspi) and if how I can do that ? Tschau nepo
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines