Jump to content

damien78

Members
  • Posts

    33
  • Joined

  • Last visited

Everything posted by damien78

  1. Hi, I'm porting trusty on imx53 ConnectCore board and I wonder what I should change in order to use lib with this card. I have an ubuntu that works. note : kernel is too old : 2.6.35 but i have source code. edit : I dropped!
  2. Hi, I have the same problem as you. Have you advance or abandoned? I think for this to work you must change script.bin in order to setup an output pin. to configure the module it is possible to add this line in modules.conf lirc_gpio gpio_out_pin=1 This'll load modules automatically at boot and select the output pin. I'm currently trying the modules with LEDs on the board before using an infrared LED because it allows me not to add hardware.
  3. hi, I plan to turn my cubietruck IR gateway, and home theater controller. The first thing to do is to be able to decode any remote control can be used with lircmd. But when I use irrecord IRW returns do anything with some remote and works with the other. While in leaving the base configuration (infrared keyboard) there is always something to send. The sunxi ir-limited driver there are thee? The second point is to emit infrared to control my devices and there is little information that is partt LIRC_GPIO seems you abandoned. I watch the IR driver in the mainline kernel and I find that it is very different. I wonder if it would not be helpful to bnackport in legacy kernel and have a more rigorous fonctionment. That the sunxi driver.
  4. Hi, U-boot cannot boot kernell zImage (compressed image) but only uImage. I dont know do with other file boot.cmd boot.scr I change path in uEnv.txt but y have only a black screenand nothing else. Regards.
  5. HI, On my cubietruck I can boot form sd card my filesysteme on SATA. But y can't boot form nand. I must use kernel 3.4.108 because alsa spdif pass trought do not work on 3.4.109. I can't use nand install script because it formating sata drive. here /boot : drwxr-xr-x 4 root root 16384 Jan 1 1970 ./drwxr-xr-x 23 root root 4096 Sep 6 09:46 ../drwxr-xr-x 2 root root 2048 Nov 11 15:33 bin/-rwxr-xr-x 1 root root 118912 Nov 18 2014 boot.axf*-rwxr-xr-x 1 root root 1745 Nov 11 15:30 boot.cmd*-rwxr-xr-x 1 root root 106 Nov 18 2014 boot.ini*-rwxr-xr-x 1 root root 1817 Nov 11 15:30 boot.scr*-rwxr-xr-x 1 root root 97046 Oct 14 20:33 config-3.4.109-sun7i*-rwxr-xr-x 1 root root 3110638 Nov 11 14:40 initrd.img-3.4.108-cubietruck*-rwxr-xr-x 1 root root 3115996 Nov 11 15:33 initrd.img-3.4.109-sun7i*drwxr-xr-x 2 root root 2048 Nov 18 2014 linux/-rwxr-xr-x 1 root root 512 Jan 1 1980 magic.bin*-rwxr-xr-x 1 root root 46360 Nov 11 15:33 script.bin*-rwxr-xr-x 1 root root 2004410 Oct 14 20:33 System.map-3.4.109-sun7i*-rwxr-xr-x 1 root root 256 Nov 11 15:33 uEnv.txt*-rwxr-xr-x 1 root root 64 Nov 11 15:33 uImage*-rwxr-xr-x 1 root root 14056 Nov 11 15:32 upgrade.log* thanks
  6. thanks! but i have compiled may modules on my x86 and copy it to may cubieboard. sorry for my bad english!
  7. Hi, I try to compil module from http://github.com/matzrh/sunxi-lirc. I updated my cubietruck to trusty with 3.4.109 kernel but y not find kernel header. Where is? Thanks!
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines