• Content Count

  • Joined

  • Last visited

Everything posted by matteobp

  1. Hi Can anyone help me? What am I doing wrong? Thanks in advance.
  2. It doesn't work. This is my /boot/armbianEnv.txt fdtfile=sun7i-a20-bananapi-m1-plus.dtb I executed this command dtc -I dtb -O dts sun7i-a20-bananapi-m1-plus.dtb > sun7i-a20-bananapi-m1-plus.dts then I modifed the file sun7i-a20-bananapi-m1-plus.dts changing the line operating-points (the values are in hexadecimal form, I used the line of the previous sun7i-a20-bananapi-m1-plus.dts obtained from my custom kernel installation), and then this command dtc -O dtb -o sun7i-a20-bananapi-m1-plus.dtb -b 0 sun7i-a20-bananapi-m1-plus.dts and reboot. I tried also to compile the /boob/boot.cmd
  3. Yes, I'm editing only the operating points. I found this post in the forum Based on it, my understand is to apply these steps: - install Device Tree compiler # sudo apt-get install device-tree-compiler - navigate to /boot/dtb and execute this command # dtc -I dtb -O dts sun7i-a20.dtb > sun7i-a20.dts (probably, it should be better to use "sun7i-a20-bananapi-m1-plus.dtb") - modify the section "operating-points" - recompile the dtb using this command # dt
  4. Hi. I have a Banana PI M1+, and I'm building my custom kernel on a VirtualBOX VM with Ubuntu Server 16.04 because I want to enable other frequencies (until 1152000) and I want to modify the voltage according to the table found here I'm having this error compiling my own kernel ¦ dpkg-deb: building package 'linux-firmware-image-4.9.10-sunxi' in '../linux-firmware-image-4.9.10-sunxi_5.26_a ¦ ¦ dpkg-deb: building package 'linux-headers-4.9.10-sunxi' in '../linux-headers-4.9.10-sunxi_5.26_armhf.deb'. ¦ ¦ dpkg-deb: building package 'linux-libc-dev'
  5. Hi all. I have a Banana Pi M1+ and I want to use it as a NAS using a SATA HDD (1TB). I read this article and I want to change the scaling_max_freq. I installed the "Armbian_5.20_Bananapi_Debian_jessie_4.7.3" image. But the maximum frequencies available is 960000. I tried to compile the kernel by myself, changing the file sources\linux-vanilla\v4.9.5\arch\arm\boot\dts\sun7i-a20.dtsi as suggested in other posts. cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu";
  6. I have a Banana PI M1+ with a monitor with maximum resolution equal to 1280*1024. No problem with this resolution. To change it you have to connect via ssh, change the /boot/boot.cmd file, and regenerate the /boot/boot.scr.
  7. I have the Banana Pi M1+ too. I was able to change the boot.cmd using a ssh session (with putty). I changed the boot.cmd as follow disp.screen0_output_mode=1280x1024p60 and then I recreate the boot.scr mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr After a reboot I can see the output on my monitor using a hdmi-dvi cable (my monitor doesn't have a hdmi port) at 1280x1024.
  8. Flickering problem is a fake problem: it was needed just a resize of the main windows
  9. I was able to build smplayer and now it works with mpv, although there is a strange flickering on the bottom bar. I have to check better all the options. Thanks for support.
  10. MPV works, but mplayer doesn't. When I run this mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all test.h264.mp4 it works and this is the output Playing: /home/bananapi/Videos/test.h264.mp4 [libav/demuxer] h264: Estimating duration from bitrate, this may be inaccurate [stream] Video (+) --vid=1 (h264) [VDPAU SUNXI] VE version 0x1623 opened. Trying to use hardware decoding. No video PTS! Making something up. VO: [vdpau] 1920x1080 => 1920x1080 vdpau [VDPAU SUNXI] Presentation time not supported V: 00:00:00 / 00:00:00 (0%) No video PTS! Making something up. But when I run this mplayer -f
  11. It seems that the support for MPV in the SMPlayer has been added in the version 15.x, but I wasn't able to find such version for Debian Jessie. The latest version of SMPlayer available for Debian Jessie is the 14.9.0. How can I install the SMPlayer version that support MPV integration on Debian Jessie? Is it possible? Thanks
  12. I have a Debian Jessie with 3.4.109 kernel. How can I install chromium on Banana? It is not available on repository and I searched on Google without success. It is new to me. How can I do it? I'm able to see h264 video using mpv with hardware decoding. Thanks
  13. Hi. I'm having the same problem on Banana Pi M1+. I have a custom build Debian Jessie with kernel 3.4.109 and desktop XFCE, and when I run this command mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all big_buck_bunny_1080p_H264_AAC_25fps_7200K.MP4 I have this error Failed to open VDPAU backend cannot open shared object file: No such file or directory I tried to compile the by myself with git clone make and this is the output root@bananapipro:~/libvdpau-sunxi# make cc -MD -MP -MQ device.o -fpic -f
  14. I don't know what happened, but the change of script.bin didn't resolve the problem. So I decided to build the image again, and now I can hear audio from 3.5 jack playing video with both default script.bin (with PH15) and modified script.bin (with PH26). This means that hardware and audio codec are ok, but I cannot hear audio seeing video on youtube with Iceweasel, and the video stutters. But this is another film. Thanks. P.S. I think there is no need to add another configuration for BPI M1+.
  15. Ok, I'll try. If I'm not mistaken, I have to convert bananapro.bin to fex (script.bin is a link to bananapro.bin), modify it and then convert it again to bin format again. I'm using my own built image following the instruction found here The image is a Debian Jessie with kernel 3.4.109, bananapro as hadware and with XFCE desktop. Is there something I can change in the build process to have this change already built in the created image with script?
  16. I installed Armbian 4.5 Debian Jessie 3.4.109 and added XFCE desktop, but there is no audio on 3.5 jack (I cannot test HDMI audio output). I built my own Debian Jessie 3.4.109 selecting Banana Pro and including XFCE desktop without any other change, and also in this case there is no audio on 3.5 jack. Some useful information to solve the problem. These are equals on both installation. root@bananapipro:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec root@bananapipro:~# cat /proc/asound/devices 2: [ 0- 0]: digital au
  17. Solved building my own Debian Jessie image with XFCE desktop following the instruction found on this link In this case there is an /etc/X11/xorg.conf file, and adding the suggested section in this file solves the problem. In the future I'll try to follow the indications found on this link (tried some without success).
  18. Extracted from /var/log/Xorg.0.log [ 39.625] Before reporting problems, check to make sure that you have the latest version. [ 39.625] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 39.626] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 21:55:52 2015 [ 39.638] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 39.654] (==) No Layout section. Using the first Screen sectio
  19. No, it doen't work neither with bananian, it freeze and cannot wake it up. I did a check in the /var/log/Xorg.0.log root@bananapi:~# cat /var/log/Xorg.0.log | grep xorg [ 34.522] xorg-server 2:1.16.4-1 ( [ 34.554] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 34.618] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.633] (II) Loading /usr/lib/xorg/modules/extensions/ [ 34.726] (II) Loading /usr/lib/xorg/modules/drivers/ [ 34.731] (II) Loading /usr/lib/xorg/modules/drivers/ [ 34
  20. I'll check the log later (I'm not at home). In the meanwhile, yesterday I installed bananian 15.08 (based on Debian Jessie) on another SD and then I installed XFCE using tasksel, as done with Armbian. With Bananian, it doesn't happen.
  21. I used this command find / -iname xorg.conf but no result. The same with find / -iname xorg* I tried also this (found with google in case of missing xorg.conf) service lightdm stop Xorg -configure but I have this error root@bananapi:~# Xorg -configure X.Org X Server 1.16.4 Release Date: 2014-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.16.0-0.bpo.4-armmp-lpae armv7l Debian Current Operating System: Linux bananapi 3.4.109-sun7i #5 SMP PREEMPT Wed Oct 14 20:33:00 CEST 2015 armv7l Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=
  22. The system seems to work without problem. This is the output of lsmod root@bananapi:~# lsmod Module Size Used by cpufreq_userspace 3524 0 spidev 6366 0 a20_tp 3365 0 8021q 18593 0 garp 6072 1 8021q stp 2032 1 garp llc 5365 2 stp,garp sunxi_ir 4037 0 hidp 17640 0 rfcomm 58686 0 hci_uart 25000 0 bluetooth 264185 5 hidp,hci_uart,rfcomm It happens after login in graphical envi
  23. I have a Banana PI M1+ with latest Armbian Jessie with 3.4.109 kernel. The dmesg contains many rows like this ones ... [ 1468.309084] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. ... ... [ 2779.128724] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. ... I tried to search on Google without success. Can someone help me please? Thanks.