Jump to content

Superkoning

Members
  • Posts

    75
  • Joined

  • Last visited

Everything posted by Superkoning

  1. With "apt update", I get: N: Skipping acquire of configured file 'main/binary-riscv64/Packages' as repository 'http://cli.github.com/packages stable InRelease' doesn't support architecture 'riscv64' N: Skipping acquire of configured file 'main/binary-riscv64/Packages' as repository 'http://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium InRelease' doesn't support architecture 'riscv64' ... is it safe to disable these two repo's? root@nezha:~# apt update Hit:2 http://ports.ubuntu.com jammy InRelease Hit:3 http://ports.ubuntu.com jammy-security InRelease Hit:4 http://ports.ubuntu.com jammy-updates InRelease Hit:5 http://ports.ubuntu.com jammy-backports InRelease Hit:6 http://ppa.launchpadcontent.net/oibaf/graphics-drivers/ubuntu jammy InRelease Hit:1 https://cli.github.com/packages stable InRelease Hit:7 https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. N: Skipping acquire of configured file 'main/binary-riscv64/Packages' as repository 'http://cli.github.com/packages stable InRelease' doesn't support architecture 'riscv64' N: Skipping acquire of configured file 'main/binary-riscv64/Packages' as repository 'http://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium InRelease' doesn't support architecture 'riscv64'
  2. Oh, wow, it just works! I downloaded Armbian_22.08.0-trunk_Nezha_jammy_current_5.19.0_xfce_desktop.img.xz, burned it to a SD-card with balena-Etcher, put it into my Lichee Dock D1, booted it ... and it worked. Amazing! I connected a 10+ year old USB-to-ethernet adapter, and ethernet was working. Really impressive. Thank you! root@nezha:~# uname -a Linux nezha 5.19.0-rc1-d1 #trunk Fri Jun 17 14:51:17 MSK 2022 riscv64 riscv64 riscv64 GNU/Linux and root@nezha:~# lsusb Bus 004 Device 008: ID 0fe6:9700 ICS Advent DM9601 Fast Ethernet Adapter Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  3. FWIW: I'm an Armbian user, and, yes, I've done a few donations in the past.
  4. Now that affordable RISC-V SBC's are appearing, are there plans to investigate and possibly support them from Armbian? BeagleV: Beta version has been delivered to developers. Now runs Fedora. Price: 150 USD. Nezha RISC-V SBC: Seems available, see https://www.cnx-software.com/2021/05/20/nezha-risc-v-linux-sbc/ . 99 USD. OS: "Tina, a fork of OpenWrt, officially supported by Allwinner, " ... D1 Linux RISC-V SBC: promised for May, but we have to wait and see. https://www.cnx-software.com/2021/04/13/allwinner-d1-linux-risc-v-sbc-processor/ If it helps, I'm willing to do a small donation.
  5. @usual user Thank you for all your work and time and explanation! You have provided me with a working Armbian Ubuntu on my Cubox, so I'm happy. Thank you
  6. I swapped the two blocks in extlinux.conf, rebooted, did not press a key, after 10 seconds it boots through (10 seconds, not 100) and ... that booted to X / DE too. So both options seem to boot (assuming now the other boot options was choosen as default). Is that good news, or not? sander@cubox-i:~$ dmesg | grep Kernel [ 0.000000] Kernel command line: root=UUID=d0456b88-9549-4375-b5ce-5fdaa9d79e04 rootfstype=ext4 rootwait console=tty1 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080m60,if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u dmesg.two-boot-options---blocks-swapped.txt
  7. Results: On the first boot, I was too late pressing "2" (fetching my phone to make pictures), and the Cubox nicely booted through to X / DE. So there is a time-out and default option? On the second boot, I pressed 2 but nothing happened ... the keyboard is not working. Pressing Numlock does not light the LED on the keyboard. After the full boot, the keyboard is working again. So, is the USB port of the cubox not powered in the initial phase of booting ... ? (Only the keyboard is connected to USB, so no USB power problem I would say) Should I swap the two blocks in extlinux.conf so that the other option becomes default? sander@cubox-i:~$ dmesg | grep Kernel [ 0.000000] Kernel command line: loglevel=1 coherent_pool=2M cma=256M console=ttymxc0,115200n8 console=tty1 rootwait rootfstype=ext4 root=PARTUUID=4461ca21-01 fbcon=nodefer rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect cubox-dmesg.2-boot-options----unaltered.txt
  8. Yes, 15 minutes and a whole night, during the first tries. I also ping-ed to see if the cubox was network-reachable (to check if it was just a display problem) but no ping respons. Today a few minutes. Please note: your Ubuntu-plus-extlinux.conf was black for only 15 seconds or so. What do you advice to do? I don't see "boot.scr" in the extlinux.conf. (This is also proof that I really don't know the magic you've done ...) EDIT: we can also leave it this way as: - it works for me, - the few other Cubox i1 single-core Armbian users in the rest of the world (if any) can use the same workaround.
  9. Oh ... I now realize I post the dmesg as code (my usual method), not as an attachment (as you requested). Do you want me to change that for the existing posts?
  10. Summary: with your extlinux.conf added, I can boot Armbian Ubuntu deskop on my Cubox! Steps taken: Base / Recheck: Download the standard Armbian Ubuntu image Armbian_20.02.7_Cubox-i_bionic_current_5.4.28_desktop.7z, unpack, write to SD card, do NOT add the extlinux.conf, boot it... same behaviour: only the first splash screen, then nothing. So that confirms earlier behavior & my original post. SD card back into my (Ubuntu) laptop, and copy the file: sander@witte2004:~$ cd /media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04 sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04$ ll total 100 drwxr-xr-x 22 root root 4096 mrt 28 18:02 ./ drwxr-x---+ 3 root root 4096 apr 7 14:08 ../ drwxr-xr-x 2 root root 4096 mrt 9 20:17 bin/ drwxr-xr-x 3 root root 4096 mrt 28 18:19 boot/ drwxr-xr-x 2 root root 4096 mrt 28 18:02 dev/ drwxr-xr-x 118 root root 4096 mrt 28 18:15 etc/ drwxr-xr-x 2 root root 4096 apr 24 2018 home/ drwxr-xr-x 17 root root 4096 mrt 28 18:02 lib/ drwx------ 2 root root 16384 mrt 28 18:15 lost+found/ drwxr-xr-x 2 root root 4096 mrt 9 19:54 media/ drwxr-xr-x 2 root root 4096 mrt 9 19:54 mnt/ drwxr-xr-x 2 root root 4096 mrt 9 19:54 opt/ drwxr-xr-x 2 root root 4096 apr 24 2018 proc/ drwx------ 2 root root 4096 mrt 28 18:13 root/ drwxr-xr-x 3 root root 4096 mrt 28 18:18 run/ drwxr-xr-x 2 root root 4096 mrt 28 18:14 sbin/ drwxrwxr-x 2 root root 4096 mrt 28 18:02 selinux/ drwxr-xr-x 2 root root 4096 mrt 9 19:54 srv/ drwxr-xr-x 2 root root 4096 apr 24 2018 sys/ drwxrwxrwt 2 root root 4096 mrt 28 18:14 tmp/ drwxr-xr-x 10 root root 4096 mrt 9 19:55 usr/ drwxr-xr-x 11 root root 4096 mrt 9 19:55 var/ sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04$ cd boot/ sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot$ mkdir extlinux mkdir: cannot create directory ‘extlinux’: Permission denied sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot$ sudo mkdir extlinux [sudo] password for sander: sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot$ cd extlinux/ sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot/extlinux$ ll ~/Downloads/extlinux.conf -rw-r--r-- 1 sander sander 810 apr 7 14:08 /home/sander/Downloads/extlinux.conf sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot/extlinux$ cp ~/Downloads/extlinux.conf . cp: cannot create regular file './extlinux.conf': Permission denied sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot/extlinux$ sudo cp ~/Downloads/extlinux.conf . sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot/extlinux$ ll total 12 drwxr-xr-x 2 root root 4096 apr 7 14:09 ./ drwxr-xr-x 4 root root 4096 apr 7 14:09 ../ -rw-r--r-- 1 root root 810 apr 7 14:09 extlinux.conf sander@witte2004:/media/sander/d0456b88-9549-4375-b5ce-5fdaa9d79e04/boot/extlinux$ Afther that: SD card back into the Cubox, turn on Cubox, splash screen with some extra lines .... black screen ... no signal ... wait ... hey ... more text and a login prompt!!! Login with root/1234, change password, add user, ... X screen! Remote ssh session ... works too! sander@192.168.1.2's password: ____ _ _ ____ __ __ ___ _ _ / ___| _| |__ _____ __ (_)___ \ ___\ \/ / / (_) || | | | | | | | '_ \ / _ \ \/ / | | __) / _ \\ / / /| | || |_ | |__| |_| | |_) | (_) > < | |/ __/ __// \ / / | |__ _| \____\__,_|_.__/ \___/_/\_\ |_|_____\___/_/\_\/_/ |_| |_| Welcome to Armbian Bionic with Linux 5.4.28-imx6 System load: 2.40 1.46 0.65 Up time: 5 min Memory usage: 41 % of 490MB IP: 192.168.1.2 CPU temp: 52°C Usage of /: 65% of 3.4G sander@cubox-i:~$ In case you need the dmesg: sander@cubox-i:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.28-imx6 (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #20.02.7 SMP Sat Mar 28 16:20:25 CET 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Solo/DualLite [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x20000000 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 19 pages/cpu s45772 r8192 d23860 u77824 [ 0.000000] pcpu-alloc: s45772 r8192 d23860 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: loglevel=7 coherent_pool=2M cma=256M console=ttymxc0,115200n8 console=tty1 rootwait rootfstype=ext4 root=PARTUUID=4461ca21-01 fbcon=nodefer rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 218856K/524288K available (8563K kernel code, 1394K rwdata, 4792K rodata, 2048K init, 513K bss, 43288K reserved, 262144K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x418 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 41219 entries in 81 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000030] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003245] Console: colour dummy device 80x30 [ 0.003716] printk: console [tty1] enabled [ 0.003799] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.003836] pid_max: default: 32768 minimum: 301 [ 0.004215] LSM: Security Framework initializing [ 0.004368] Yama: becoming mindful. [ 0.004440] SELinux: Initializing. [ 0.004590] *** VALIDATE SELinux *** [ 0.004708] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004745] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004904] *** VALIDATE tmpfs *** [ 0.005866] *** VALIDATE proc *** [ 0.006311] *** VALIDATE cgroup1 *** [ 0.006343] *** VALIDATE cgroup2 *** [ 0.006452] CPU: Testing write buffer coherency: ok [ 0.006511] CPU0: Spectre v2: using BPIALL workaround [ 0.007011] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008249] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.010341] rcu: Hierarchical SRCU implementation. [ 0.015915] EFI services will not be available. [ 0.016593] smp: Bringing up secondary CPUs ... [ 0.017654] smp: Brought up 1 node, 1 CPU [ 0.017683] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.017704] CPU: All CPU(s) started in SVC mode. [ 0.018631] devtmpfs: initialized [ 0.031519] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.032326] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.032377] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.045871] pinctrl core: initialized pinctrl subsystem [ 0.048210] DMI not present or invalid. [ 0.049028] NET: Registered protocol family 16 [ 0.058510] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.059319] audit: initializing netlink subsys (disabled) [ 0.061551] cpuidle: using governor menu [ 0.062269] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.063172] audit: type=2000 audit(0.057:1): state=initialized audit_enabled=0 res=1 [ 0.090067] No ATAGs? [ 0.090177] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.090223] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.093275] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.095717] Serial: AMBA PL011 UART driver [ 2.004951] cryptd: max_cpu_qlen set to 1000 [ 2.024482] alg: No test for 842 (842-generic) [ 2.025070] alg: No test for 842 (842-scomp) [ 2.079204] v_usb2: supplied by v_5v0 [ 2.079573] vcc_3v3: supplied by v_5v0 [ 2.079951] v_usb1: supplied by v_5v0 [ 2.083474] iommu: Default domain type: Translated [ 2.084864] vgaarb: loaded [ 2.086064] SCSI subsystem initialized [ 2.086511] libata version 3.00 loaded. [ 2.086879] usbcore: registered new interface driver usbfs [ 2.086990] usbcore: registered new interface driver hub [ 2.087224] usbcore: registered new device driver usb [ 2.088147] pps_core: LinuxPPS API ver. 1 registered [ 2.088177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.088227] PTP clock support registered [ 2.088652] EDAC MC: Ver: 3.0.0 [ 2.091680] NetLabel: Initializing [ 2.091709] NetLabel: domain hash size = 128 [ 2.091726] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.091831] NetLabel: unlabeled traffic allowed by default [ 2.092704] clocksource: Switched to clocksource mxc_timer1 [ 2.225878] *** VALIDATE bpf *** [ 2.226332] VFS: Disk quotas dquot_6.6.0 [ 2.226467] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.226606] *** VALIDATE ramfs *** [ 2.242003] thermal_sys: Registered thermal governor 'fair_share' [ 2.242009] thermal_sys: Registered thermal governor 'step_wise' [ 2.242046] thermal_sys: Registered thermal governor 'user_space' [ 2.242809] NET: Registered protocol family 2 [ 2.243912] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.243990] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.244066] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.244154] TCP: Hash tables configured (established 4096 bind 4096) [ 2.244338] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.244391] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.244887] NET: Registered protocol family 1 [ 2.244944] NET: Registered protocol family 44 [ 2.244972] PCI: CLS 0 bytes, default 64 [ 2.245641] Trying to unpack rootfs image as initramfs... [ 4.080205] Freeing initrd memory: 19156K [ 4.081069] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 4.081291] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.187301] Initialise system trusted keyrings [ 4.187395] Key type blacklist registered [ 4.187862] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 4.200021] zbud: loaded [ 4.252338] NET: Registered protocol family 38 [ 4.252382] Key type asymmetric registered [ 4.252400] Asymmetric key parser 'x509' registered [ 4.252493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 4.252903] io scheduler mq-deadline registered [ 4.252933] io scheduler kyber registered [ 4.253209] io scheduler bfq registered [ 4.253578] atomic64_test: passed [ 4.277929] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.294439] Serial: AMBA driver [ 4.295516] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 5.057146] printk: console [ttymxc0] enabled [ 5.062936] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 66, base_baud = 5000000) is a IMX [ 5.073314] msm_serial: driver initialized [ 5.077484] STMicroelectronics ASC driver initialized [ 5.084012] STM32 USART driver initialized [ 5.093933] libphy: Fixed MDIO Bus: probed [ 5.098884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.105502] ehci-pci: EHCI PCI platform driver [ 5.110079] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.116509] usbcore: registered new interface driver usb-storage [ 5.122744] usbcore: registered new interface driver usbserial_generic [ 5.129368] usbserial: USB Serial support registered for generic [ 5.135780] mousedev: PS/2 mouse device common for all mice [ 5.146600] device-mapper: uevent: version 1.0.3 [ 5.151899] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 5.163054] ledtrig-cpu: registered to indicate activity on CPUs [ 5.170198] hidraw: raw HID events driver (C) Jiri Kosina [ 5.176024] usbcore: registered new interface driver usbhid [ 5.181664] usbhid: USB HID core driver [ 5.187616] drop_monitor: Initializing network drop monitor service [ 5.194294] Initializing XFRM netlink socket [ 5.199599] NET: Registered protocol family 10 [ 5.256648] Segment Routing with IPv6 [ 5.260578] mip6: Mobile IPv6 [ 5.263659] NET: Registered protocol family 17 [ 5.269854] ThumbEE CPU extension supported. [ 5.274247] Registering SWP/SWPB emulation handler [ 5.452948] registered taskstats version 1 [ 5.457227] Loading compiled-in X.509 certificates [ 5.911619] Loaded X.509 cert 'Build time autogenerated kernel key: 5a35c1f2ad25163b6eb99db1323c21e281faec0a' [ 5.921882] zswap: loaded using pool lzo/zbud [ 5.927257] Key type ._fscrypt registered [ 5.931377] Key type .fscrypt registered [ 5.966207] Key type big_key registered [ 5.994958] Key type encrypted registered [ 5.999154] ima: No TPM chip found, activating TPM-bypass! [ 6.004838] ima: Allocated hash algorithm: sha256 [ 6.009779] ima: No architecture policies found [ 6.054832] hctosys: unable to open rtc device (rtc0) [ 6.078059] Freeing unused kernel memory: 2048K [ 6.087219] ------------[ cut here ]------------ [ 6.091936] WARNING: CPU: 0 PID: 1 at arch/arm/mm/dump.c:249 note_page+0x158/0x324 [ 6.099577] arm/mm: Found insecure W+X mapping at address 0xe0839000 [ 6.105981] Modules linked in: [ 6.109093] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.28-imx6 #20.02.7 [ 6.115994] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 6.122572] [<c03112ac>] (unwind_backtrace) from [<c030b784>] (show_stack+0x18/0x1c) [ 6.130355] [<c030b784>] (show_stack) from [<c0b428a8>] (dump_stack+0xb4/0xd4) [ 6.137614] [<c0b428a8>] (dump_stack) from [<c034d798>] (__warn+0xd4/0xf0) [ 6.144522] [<c034d798>] (__warn) from [<c034db48>] (warn_slowpath_fmt+0x70/0x84) [ 6.152039] [<c034db48>] (warn_slowpath_fmt) from [<c031986c>] (note_page+0x158/0x324) [ 6.159990] [<c031986c>] (note_page) from [<c0319b04>] (walk_pgd+0xcc/0xe0) [ 6.166977] [<c0319b04>] (walk_pgd) from [<c0319bdc>] (ptdump_check_wx+0x58/0xac) [ 6.174491] [<c0319bdc>] (ptdump_check_wx) from [<c0b56a1c>] (kernel_init+0x34/0x130) [ 6.182351] [<c0b56a1c>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 6.189945] Exception stack(0xcf519fb0 to 0xcf519ff8) [ 6.195019] 9fa0: 00000000 00000000 00000000 00000000 [ 6.203225] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 6.211427] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 6.218102] ---[ end trace 25f2666269521972 ]--- [ 6.223009] Checked W+X mappings: FAILED, 1 W+X pages found [ 6.228647] rodata_test: all tests were successful [ 6.233492] Run /init as init process [ 8.338584] vdd1p1: supplied by regulator-dummy [ 8.390060] vdd3p0: supplied by regulator-dummy [ 8.422041] vdd2p5: supplied by regulator-dummy [ 8.456994] vddarm: supplied by regulator-dummy [ 8.471900] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 8.495998] vddpu: supplied by regulator-dummy [ 8.531023] vddsoc: supplied by regulator-dummy [ 8.759877] sdhci: Secure Digital Host Controller Interface driver [ 8.766188] sdhci: Copyright(c) Pierre Ossman [ 8.771863] pps pps0: new PPS source ptp0 [ 8.780233] i2c i2c-1: IMX I2C adapter registered [ 8.841028] i2c i2c-2: IMX I2C adapter registered [ 8.886496] libphy: fec_enet_mii_bus: probed [ 8.940158] fec 2188000.ethernet eth0: registered PHC device 0 [ 9.003503] sdhci-pltfm: SDHCI platform and OF driver helper [ 9.011765] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 9.119318] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 9.138524] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq [ 9.234072] imx_usb 2184000.usb: No over current polarity defined [ 9.278959] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 9.300895] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 9.340839] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 9.358378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 9.366778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.374075] usb usb1: Product: EHCI Host Controller [ 9.379010] usb usb1: Manufacturer: Linux 5.4.28-imx6 ehci_hcd [ 9.384901] usb usb1: SerialNumber: ci_hdrc.0 [ 9.458890] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 9.490680] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 9.522499] hub 1-0:1.0: USB hub found [ 9.544919] hub 1-0:1.0: 1 port detected [ 9.549069] rtc-pcf8523 2-0068: failed to set xtal load capacitance: -6 [ 9.566202] imx_usb 2184200.usb: No over current polarity defined [ 9.581050] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 9.596273] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 9.616607] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 9.630759] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 9.636738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 9.645078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.652362] usb usb2: Product: EHCI Host Controller [ 9.657299] usb usb2: Manufacturer: Linux 5.4.28-imx6 ehci_hcd [ 9.663186] usb usb2: SerialNumber: ci_hdrc.1 [ 9.671899] hub 2-0:1.0: USB hub found [ 9.675947] hub 2-0:1.0: 1 port detected [ 9.680121] mmc1: host does not support reading read-only switch, assuming write-enable [ 9.708815] mmc1: new high speed SDHC card at address aaaa [ 9.777497] mmcblk1: mmc1:aaaa SU04G 3.69 GiB [ 9.807299] mmcblk1: p1 [ 9.884773] usb 1-1: new low-speed USB device number 2 using ci_hdrc [ 9.898777] random: fast init done [ 10.016804] usb 2-1: new low-speed USB device number 2 using ci_hdrc [ 10.033330] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 10.041636] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.048860] usb 1-1: Product: USB Keyboard [ 10.053016] usb 1-1: Manufacturer: Logitech [ 10.103436] input: Logitech USB Keyboard as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input0 [ 10.188394] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-ci_hdrc.0-1/input0 [ 10.207497] usb 2-1: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00 [ 10.215807] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.223025] usb 2-1: Product: HP X500 USB Optical Mouse [ 10.228312] usb 2-1: Manufacturer: PixArt [ 10.248660] raid6: using algorithm neonx8 gen() 0 MB/s [ 10.253992] raid6: .... xor() 0 MB/s, rmw enabled [ 10.258774] raid6: using neon recovery algorithm [ 10.272961] input: Logitech USB Keyboard Consumer Control as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input1 [ 10.333844] input: PixArt HP X500 USB Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1:1.0/0003:03F0:0941.0003/input/input3 [ 10.377368] input: Logitech USB Keyboard System Control as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input2 [ 10.393611] hid-generic 0003:03F0:0941.0003: input,hidraw1: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-ci_hdrc.1-1/input0 [ 10.407776] xor: measuring software checksum speed [ 10.421704] arm4regs : 1188.000 MB/sec [ 10.435707] 8regs : 908.000 MB/sec [ 10.449701] 32regs : 956.000 MB/sec [ 10.463701] neon : 884.000 MB/sec [ 10.467931] xor: using function: arm4regs (1188.000 MB/sec) [ 10.490929] hid-generic 0003:046D:C31C.0002: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-ci_hdrc.0-1/input1 [ 10.728907] Btrfs loaded, crc32c=crc32c-generic [ 11.211838] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null) [ 12.138132] systemd[1]: System time before build time, advancing clock. [ 12.273542] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 12.295878] systemd[1]: Detected architecture arm. [ 12.325425] systemd[1]: Set hostname to <cubox-i>. [ 13.393983] random: systemd: uninitialized urandom read (16 bytes read) [ 13.400922] systemd[1]: Reached target System Time Synchronized. [ 13.409030] random: systemd: uninitialized urandom read (16 bytes read) [ 13.416943] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.427155] random: systemd: uninitialized urandom read (16 bytes read) [ 13.433988] systemd[1]: Reached target Swap. [ 13.439006] systemd[1]: Reached target Remote File Systems. [ 13.445260] systemd[1]: Reached target User and Group Name Lookups. [ 13.452879] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 13.463162] systemd[1]: Created slice User and Session Slice. [ 14.075820] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro [ 17.693134] zram: Added device: zram0 [ 17.696169] zram: Added device: zram1 [ 17.699201] zram: Added device: zram2 [ 17.969096] zram1: detected capacity change from 0 to 257130496 [ 18.229176] systemd[1]: Started Raise network interfaces. [ 19.101028] Adding 251100k swap on /dev/zram1. Priority:5 extents:1 across:251100k SSFS [ 19.692136] zram0: detected capacity change from 0 to 52428800 [ 20.152880] Registered IR keymap rc-empty [ 20.153024] rc rc0: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0 [ 20.153887] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 20.154096] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0/input4 [ 20.182135] input: gpio-keys as /devices/soc0/gpio-keys/input/input5 [ 20.650145] mc: Linux media interface: v0.10 [ 20.898327] systemd[1]: Found device /dev/ttymxc0. [ 20.933168] videodev: Linux video capture interface: v2.00 [ 20.965962] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 20.970156] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 20.970174] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 20.972039] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 20.979935] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 21.128184] imx-ipuv3 2400000.ipu: IPUv3H probed [ 21.269016] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 21.269023] [drm] No driver support for vblank timestamp query. [ 21.269244] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm]) [ 21.269408] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm]) [ 21.269620] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 21.288790] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 21.291117] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 21.323248] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 21.855817] systemd[1]: Started Armbian ZRAM config. [ 21.861185] Console: switching to colour frame buffer device 240x67 [ 21.885853] imx-drm display-subsystem: fb0: imx-drmdrmfb frame buffer device [ 21.893960] systemd[1]: Starting Armbian memory supported logging... [ 21.998463] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 22.018118] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6d.bin [ 22.021245] coda 2040000.vpu: Firmware code revision: 46063 [ 22.021255] coda 2040000.vpu: Initialized CODA960. [ 22.021261] coda 2040000.vpu: Firmware version: 3.1.1 [ 22.025303] coda 2040000.vpu: encoder registered as video0 [ 22.025512] coda 2040000.vpu: decoder registered as video1 [ 22.211338] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 22.211377] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 22.736078] imx-sdma 20ec000.sdma: loaded firmware 1.1 [ 22.773648] caam 2100000.caam: Entropy delay = 3200 [ 22.834441] caam 2100000.caam: Instantiated RNG4 SH0 [ 22.895202] caam 2100000.caam: Instantiated RNG4 SH1 [ 22.895213] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 22.895220] caam 2100000.caam: job rings = 2, qi = 0 [ 25.280075] systemd[1]: Started Armbian memory supported logging. [ 25.300176] systemd[1]: Starting Journal Service... [ 25.695517] systemd[1]: Started Journal Service. [ 25.709417] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 25.837806] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 25.837825] imx-spdif sound-spdif: ASoC: no DMI vendor name! [ 25.856032] systemd-journald[619]: Received request to flush runtime journal from PID 1 [ 31.710805] Registered IR keymap rc-cec [ 31.711042] rc rc1: dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1 [ 31.711250] input: dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1/input6 [ 36.322842] brcm_reg: disabling [ 36.915785] rc rc0: two consecutive events of type space [ 37.069209] random: crng init done [ 37.069219] random: 7 urandom warning(s) missed due to ratelimiting [ 38.558936] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam) [ 38.567342] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam) [ 38.574361] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam) [ 38.581306] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam) [ 39.416914] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam) [ 39.434905] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam) [ 39.451846] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam) [ 40.286961] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam) [ 40.304945] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam) [ 40.323824] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam) [ 40.474535] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam) [ 40.608866] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam) [ 40.749095] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam) [ 40.758025] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam) [ 40.765138] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam) [ 40.901355] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam) [ 41.033822] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam) [ 41.171433] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam) [ 41.178443] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam) [ 41.185441] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam) [ 41.199179] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam) [ 41.206255] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam) [ 41.213271] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam) [ 41.227111] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam) [ 41.234023] caam algorithms registered in /proc/crypto [ 45.612517] caam_jr 2101000.jr0: registering rng-caam [ 45.741487] EXT4-fs (mmcblk1p1): resizing filesystem from 713728 to 915840 blocks [ 49.548259] EXT4-fs (mmcblk1p1): resized filesystem to 915840 [ 57.711086] Atheros 8035 ethernet 2188000.ethernet-1:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL) [ 59.811578] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 59.811650] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 248.222355] fuse: init (API version 7.31) [ 248.222621] *** VALIDATE fuse *** [ 248.222640] *** VALIDATE fuse *** sander@cubox-i:~$
  11. (Again: still on Fedora, which works) Hmmm, is this interesting? [ 3.494048] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.500678] [<c031127c>] (unwind_backtrace) from [<c030b744>] (show_stack+0x18/0x1c) [ 3.508524] [<c030b744>] (show_stack) from [<c0b85974>] (dump_stack+0xa8/0xc4) [ 3.515842] [<c0b85974>] (dump_stack) from [<c034d59c>] (__warn+0xdc/0xf8) [ 3.522807] [<c034d59c>] (__warn) from [<c034d94c>] (warn_slowpath_fmt+0x70/0x84) [ 3.530384] [<c034d94c>] (warn_slowpath_fmt) from [<c03197a8>] (note_page+0x160/0x324) [ 3.538399] [<c03197a8>] (note_page) from [<c0319a34>] (walk_pgd+0xc8/0xe0) [ 3.545448] [<c0319a34>] (walk_pgd) from [<c0319b10>] (ptdump_check_wx+0x58/0xac) [ 3.553030] [<c0319b10>] (ptdump_check_wx) from [<c0b99bd0>] (kernel_init+0x34/0x11c) [ 3.560960] [<c0b99bd0>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 3.568618] Exception stack(0xcf513fb0 to 0xcf513ff8) [ 3.573733] 3fa0: 00000000 00000000 00000000 00000000 [ 3.582006] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.590278] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.597065] ---[ end trace 8433cd0617ef4a53 ]--- So dmesg says "Device Tree", and then a backtrace / traceback ... ?
  12. I would prefer Ubuntu, so https://dl.armbian.com/cubox-i/Bionic_current_desktop which links to https://dl.armbian.com/cubox-i/archive/Armbian_20.02.7_Cubox-i_bionic_current_5.4.28_desktop.7z $ ll Bionic_current_desktop -rw-rw-r-- 1 sander sander 661128023 Mär 28 18:21 Bionic_current_desktop $ file Bionic_current_desktop Bionic_current_desktop: 7-zip archive data, version 0.4 $ ll Bionic_current_desktop -rw-rw-r-- 1 sander sander 661128023 Mär 28 18:21 Bionic_current_desktop $ sha256sum Bionic_current_desktop 0b00ac659cda20516158180ba3d375850afe9b6c2b14bc83bcd9e174b2ca2e6e Bionic_current_desktop
  13. dmesg from Fedora: [lxqt@trial ~]$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.0-0.rc3.git0.1.fc31.armv7hl (root@micro-011) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Fri Oct 18 20:33:34 CEST 2019 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Cubox-i Solo/DualLite [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x20000000 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 19 pages/cpu s46028 r8192 d23604 u77824 [ 0.000000] pcpu-alloc: s46028 r8192 d23604 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: selinux=0 audit=0 loglevel=5 coherent_pool=2M cma=256M console=ttymxc0,115200n8 console=tty1 ahci_imx.hotplug=1 raid=noautodetect rootwait rootfstype=ext4 root=PARTUUID=679e3844-03 fbcon=nodefer [ 0.000000] audit: disabled (until reboot) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 238036K/524288K available (8831K kernel code, 1384K rwdata, 4936K rodata, 2048K init, 503K bss, 24108K reserved, 262144K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x418 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 42351 entries in 83 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003149] Console: colour dummy device 80x30 [ 0.003166] printk: console [tty1] enabled [ 0.003209] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) [ 0.003222] pid_max: default: 32768 minimum: 301 [ 0.003554] LSM: Security Framework initializing [ 0.003583] Yama: becoming mindful. [ 0.003729] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003743] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003872] *** VALIDATE tmpfs *** [ 0.004763] *** VALIDATE proc *** [ 0.005104] *** VALIDATE cgroup1 *** [ 0.005159] *** VALIDATE cgroup2 *** [ 0.005249] CPU: Testing write buffer coherency: ok [ 0.005292] CPU0: Spectre v2: using BPIALL workaround [ 0.005726] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006821] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008857] rcu: Hierarchical SRCU implementation. [ 0.014477] EFI services will not be available. [ 0.015086] smp: Bringing up secondary CPUs ... [ 0.016187] smp: Brought up 1 node, 1 CPU [ 0.016197] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.016205] CPU: All CPU(s) started in SVC mode. [ 0.016927] devtmpfs: initialized [ 0.028312] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.028971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.028994] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.042937] pinctrl core: initialized pinctrl subsystem [ 0.045005] DMI not present or invalid. [ 0.045795] NET: Registered protocol family 16 [ 0.054732] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.057091] cpuidle: using governor menu [ 0.057747] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.068896] vdd1p1: supplied by regulator-dummy [ 0.069638] vdd3p0: supplied by regulator-dummy [ 0.070421] vdd2p5: supplied by regulator-dummy [ 0.071168] vddarm: supplied by regulator-dummy [ 0.071909] vddpu: supplied by regulator-dummy [ 0.072659] vddsoc: supplied by regulator-dummy [ 0.087305] No ATAGs? [ 0.087377] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.087385] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.090365] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.092739] Serial: AMBA PL011 UART driver [ 2.110043] cryptd: max_cpu_qlen set to 1000 [ 2.128627] alg: No test for 842 (842-generic) [ 2.129300] alg: No test for 842 (842-scomp) [ 2.180349] v_usb2: supplied by v_5v0 [ 2.180636] vcc_3v3: supplied by v_5v0 [ 2.180984] v_usb1: supplied by v_5v0 [ 2.184452] iommu: Default domain type: Translated [ 2.185771] vgaarb: loaded [ 2.186901] SCSI subsystem initialized [ 2.187305] libata version 3.00 loaded. [ 2.187663] usbcore: registered new interface driver usbfs [ 2.187732] usbcore: registered new interface driver hub [ 2.187884] usbcore: registered new device driver usb [ 2.189231] i2c i2c-1: IMX I2C adapter registered [ 2.190061] i2c i2c-2: IMX I2C adapter registered [ 2.190818] pps_core: LinuxPPS API ver. 1 registered [ 2.190826] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.190851] PTP clock support registered [ 2.191280] EDAC MC: Ver: 3.0.0 [ 2.194027] NetLabel: Initializing [ 2.194036] NetLabel: domain hash size = 128 [ 2.194041] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.194205] NetLabel: unlabeled traffic allowed by default [ 2.195007] clocksource: Switched to clocksource mxc_timer1 [ 2.309304] *** VALIDATE bpf *** [ 2.309703] VFS: Disk quotas dquot_6.6.0 [ 2.309796] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.309900] *** VALIDATE ramfs *** [ 2.323078] thermal_sys: Registered thermal governor 'fair_share' [ 2.323084] thermal_sys: Registered thermal governor 'step_wise' [ 2.323093] thermal_sys: Registered thermal governor 'user_space' [ 2.323740] NET: Registered protocol family 2 [ 2.324761] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.324806] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.324856] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.324929] TCP: Hash tables configured (established 4096 bind 4096) [ 2.325200] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.325231] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.325513] NET: Registered protocol family 1 [ 2.325557] NET: Registered protocol family 44 [ 2.325574] PCI: CLS 0 bytes, default 64 [ 2.326907] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.327189] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 2.352431] Initialise system trusted keyrings [ 2.352490] Key type blacklist registered [ 2.352808] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.362290] zbud: loaded [ 2.408111] NET: Registered protocol family 38 [ 2.408129] Key type asymmetric registered [ 2.408135] Asymmetric key parser 'x509' registered [ 2.408202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 2.408476] io scheduler mq-deadline registered [ 2.408484] io scheduler kyber registered [ 2.408714] io scheduler bfq registered [ 2.409182] atomic64_test: passed [ 2.433613] Serial: AMBA driver [ 2.434689] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.441973] printk: console [ttymxc0] enabled [ 2.443271] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 66, base_baud = 5000000) is a IMX [ 2.444850] msm_serial: driver initialized [ 2.444857] STMicroelectronics ASC driver initialized [ 2.446245] STM32 USART driver initialized [ 2.452863] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.452870] [drm] No driver support for vblank timestamp query. [ 2.453141] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.453305] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.453544] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.455426] rc_core: Couldn't load IR keymap rc-cec [ 2.460423] Registered IR keymap rc-empty [ 2.460603] rc rc0: dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc0 [ 2.460798] input: dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc0/input0 [ 2.461217] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.461787] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 2.495877] random: fast init done [ 2.583945] Console: switching to colour frame buffer device 240x67 [ 2.616144] imx-drm display-subsystem: fb0: imx-drmdrmfb frame buffer device [ 2.616209] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.620192] libphy: Fixed MDIO Bus: probed [ 2.620855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.620876] ehci-pci: EHCI PCI platform driver [ 2.620955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.621195] usbcore: registered new interface driver usbserial_generic [ 2.621253] usbserial: USB Serial support registered for generic [ 2.621505] mousedev: PS/2 mouse device common for all mice [ 2.623114] rtc-pcf8523 2-0068: failed to set xtal load capacitance: -6 [ 2.635783] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.636245] device-mapper: uevent: version 1.0.3 [ 2.636703] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 2.639587] sdhci: Secure Digital Host Controller Interface driver [ 2.639593] sdhci: Copyright(c) Pierre Ossman [ 2.639598] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.640854] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq [ 2.882747] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.884912] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 2.919384] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.920816] ledtrig-cpu: registered to indicate activity on CPUs [ 2.923277] hidraw: raw HID events driver (C) Jiri Kosina [ 2.923605] usbcore: registered new interface driver usbhid [ 2.923610] usbhid: USB HID core driver [ 2.928170] drop_monitor: Initializing network drop monitor service [ 2.928578] Initializing XFRM netlink socket [ 2.929778] NET: Registered protocol family 10 [ 2.941793] Segment Routing with IPv6 [ 2.941915] mip6: Mobile IPv6 [ 2.941927] NET: Registered protocol family 17 [ 2.945309] ThumbEE CPU extension supported. [ 2.945329] Registering SWP/SWPB emulation handler [ 2.965223] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.973664] registered taskstats version 1 [ 2.973711] Loading compiled-in X.509 certificates [ 2.994159] mmc1: new high speed SDHC card at address aaaa [ 2.999621] mmcblk1: mmc1:aaaa SL32G 29.7 GiB [ 3.007091] mmcblk1: p1 p2 p3 [ 3.362719] Loaded X.509 cert 'Fedora kernel signing key: c92d03ad4041dcd40428aa975833ae99f7e7a880' [ 3.362843] zswap: loaded using pool lzo/zbud [ 3.363434] Key type ._fscrypt registered [ 3.363441] Key type .fscrypt registered [ 3.371230] Key type big_key registered [ 3.375793] Key type encrypted registered [ 3.375832] ima: No TPM chip found, activating TPM-bypass! [ 3.375866] ima: Allocated hash algorithm: sha256 [ 3.375914] ima: No architecture policies found [ 3.407031] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.409194] hctosys: unable to open rtc device (rtc0) [ 3.410826] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.436449] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.436583] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.446855] devtmpfs: mounted [ 3.459090] Freeing unused kernel memory: 2048K [ 3.463718] ------------[ cut here ]------------ [ 3.468523] WARNING: CPU: 0 PID: 1 at arch/arm/mm/dump.c:248 note_page+0x160/0x324 [ 3.476251] arm/mm: Found insecure W+X mapping at address 0xe0839000 [ 3.482712] Modules linked in: [ 3.485859] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-0.rc3.git0.1.fc31.armv7hl #1 [ 3.494048] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.500678] [<c031127c>] (unwind_backtrace) from [<c030b744>] (show_stack+0x18/0x1c) [ 3.508524] [<c030b744>] (show_stack) from [<c0b85974>] (dump_stack+0xa8/0xc4) [ 3.515842] [<c0b85974>] (dump_stack) from [<c034d59c>] (__warn+0xdc/0xf8) [ 3.522807] [<c034d59c>] (__warn) from [<c034d94c>] (warn_slowpath_fmt+0x70/0x84) [ 3.530384] [<c034d94c>] (warn_slowpath_fmt) from [<c03197a8>] (note_page+0x160/0x324) [ 3.538399] [<c03197a8>] (note_page) from [<c0319a34>] (walk_pgd+0xc8/0xe0) [ 3.545448] [<c0319a34>] (walk_pgd) from [<c0319b10>] (ptdump_check_wx+0x58/0xac) [ 3.553030] [<c0319b10>] (ptdump_check_wx) from [<c0b99bd0>] (kernel_init+0x34/0x11c) [ 3.560960] [<c0b99bd0>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 3.568618] Exception stack(0xcf513fb0 to 0xcf513ff8) [ 3.573733] 3fa0: 00000000 00000000 00000000 00000000 [ 3.582006] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.590278] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.597065] ---[ end trace 8433cd0617ef4a53 ]--- [ 3.602058] Checked W+X mappings: FAILED, 1 W+X pages found [ 3.607737] rodata_test: all tests were successful [ 3.607745] Run /sbin/init as init process [ 4.480765] systemd[1]: System time before build time, advancing clock. [ 4.706941] systemd[1]: systemd v243-4.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.708526] systemd[1]: Detected architecture arm. [ 4.710591] systemd[1]: Set hostname to <trial>. [ 5.601548] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 6.368267] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 6.633893] systemd[1]: /usr/lib/systemd/system/sssd-kcm.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/.heim_org.h5l.kcm-socket → /run/.heim_org.h5l.kcm-socket; please update the unit file accordingly. [ 6.671438] random: systemd: uninitialized urandom read (16 bytes read) [ 6.676906] systemd[1]: Created slice system-getty.slice. [ 6.677856] random: systemd: uninitialized urandom read (16 bytes read) [ 6.679891] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.680141] random: systemd: uninitialized urandom read (16 bytes read) [ 6.682352] systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ 6.684395] systemd[1]: Created slice User and Session Slice. [ 6.684979] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.577194] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 7.739432] zram: Added device: zram0 [ 8.182268] zram0: detected capacity change from 0 to 245002240 [ 8.635854] systemd-journald[275]: Received client request to flush runtime journal. [ 9.350086] random: crng init done [ 9.350097] random: 6 urandom warning(s) missed due to ratelimiting [ 9.364574] Adding 239256k swap on /dev/zram0. Priority:1000 extents:1 across:239256k SSFS [ 11.733504] Registered IR keymap rc-empty [ 11.733634] rc rc1: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc1 [ 11.733811] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc1/input1 [ 11.743944] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 11.744496] rc rc1: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter [ 11.799375] mc: Linux media interface: v0.10 [ 12.413404] videodev: Linux video capture interface: v2.00 [ 12.429249] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 12.437195] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 12.437213] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 12.441725] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 12.453163] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 13.527120] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 13.892912] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 13.980815] coda 2040000.vpu: Firmware code revision: 570363 [ 13.980829] coda 2040000.vpu: Initialized CODA960. [ 13.980835] coda 2040000.vpu: Firmware version: 3.1.1 [ 13.983173] coda 2040000.vpu: encoder registered as video0 [ 13.983421] coda 2040000.vpu: decoder registered as video1 [ 14.053410] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 14.442395] imx-sdma 20ec000.sdma: loaded firmware 3.5 [ 14.830136] caam 2100000.caam: Entropy delay = 3200 [ 14.830173] caam 2100000.caam: Instantiated RNG4 SH0 [ 14.890938] caam 2100000.caam: Instantiated RNG4 SH1 [ 14.890950] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 14.890957] caam 2100000.caam: job rings = 2, qi = 0 [ 15.127974] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.202700] pps pps0: new PPS source ptp0 [ 15.269553] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.282585] libphy: fec_enet_mii_bus: probed [ 15.283836] fec 2188000.ethernet eth0: registered PHC device 0 [ 15.288984] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.641241] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.674431] imx_usb 2184000.usb: No over current polarity defined [ 15.708213] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 15.733302] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 15.776328] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 15.776672] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 15.787104] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 15.787487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 15.787497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.787504] usb usb1: Product: EHCI Host Controller [ 15.787511] usb usb1: Manufacturer: Linux 5.4.0-0.rc3.git0.1.fc31.armv7hl ehci_hcd [ 15.787517] usb usb1: SerialNumber: ci_hdrc.0 [ 15.794403] hub 1-0:1.0: USB hub found [ 15.802298] hub 1-0:1.0: 1 port detected [ 15.806153] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.824568] imx_usb 2184200.usb: No over current polarity defined [ 15.834093] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.918185] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video2 [ 15.922178] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video3 [ 15.922521] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video4 [ 15.922562] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 15.922571] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 15.922578] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 15.922584] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 15.922590] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 15.922597] imx-media: subdev ipu1_csi0 bound [ 15.923619] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 15.941248] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 15.941265] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 15.941272] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 15.941283] imx-media: subdev ipu1_csi1 bound [ 15.941313] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 15.941372] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 15.953108] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 15.953441] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 16.008118] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 16.010745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 16.010757] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.010765] usb usb2: Product: EHCI Host Controller [ 16.010771] usb usb2: Manufacturer: Linux 5.4.0-0.rc3.git0.1.fc31.armv7hl ehci_hcd [ 16.010777] usb usb2: SerialNumber: ci_hdrc.1 [ 16.014865] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video6 [ 16.015948] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.027307] hub 2-0:1.0: USB hub found [ 16.030106] hub 2-0:1.0: 1 port detected [ 16.040067] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.074193] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.124110] usb 1-1: new low-speed USB device number 2 using ci_hdrc [ 16.137283] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 16.203534] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 16.210154] Mounted ext4 file system at /mnt/boot supports timestamps until 2038 (0x7fffffff) [ 16.262592] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 16.262607] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.262615] usb 1-1: Product: USB Keyboard [ 16.262621] usb 1-1: Manufacturer: Logitech [ 16.276682] input: Logitech USB Keyboard as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input3 [ 16.287342] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.297291] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 16.329316] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-ci_hdrc.0-1/input0 [ 16.330573] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.347291] input: Logitech USB Keyboard Consumer Control as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input4 [ 16.364105] usb 2-1: new low-speed USB device number 2 using ci_hdrc [ 16.399543] input: Logitech USB Keyboard System Control as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input5 [ 16.399952] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-ci_hdrc.0-1/input1 [ 16.402968] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.503671] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 16.522053] usb 2-1: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00 [ 16.522067] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.522074] usb 2-1: Product: HP X500 USB Optical Mouse [ 16.522080] usb 2-1: Manufacturer: PixArt [ 16.546688] input: PixArt HP X500 USB Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1:1.0/0003:03F0:0941.0003/input/input6 [ 16.548518] hid-generic 0003:03F0:0941.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-ci_hdrc.1-1/input0 [ 16.553971] imx-spdif sound-spdif: ASoC: failed to init link S/PDIF PCM: -517 [ 17.011120] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 17.011140] imx-spdif sound-spdif: ASoC: no DMI vendor name! [ 32.324109] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam) [ 32.370271] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam) [ 32.416619] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam) [ 32.465664] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam) [ 33.363069] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam) [ 33.408804] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam) [ 33.461809] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam) [ 33.762764] brcm_reg: disabling [ 34.348742] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam) [ 34.386712] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam) [ 34.421735] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam) [ 34.615145] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam) [ 34.825045] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam) [ 35.025706] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam) [ 35.059659] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam) [ 35.096287] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam) [ 35.278316] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam) [ 35.465661] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam) [ 35.669643] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam) [ 35.717774] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam) [ 35.762953] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam) [ 35.861684] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam) [ 35.914720] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam) [ 35.962914] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam) [ 36.054889] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam) [ 36.099664] caam algorithms registered in /proc/crypto [ 41.579331] caam_jr 2101000.jr0: registering rng-caam [ 42.154351] Atheros 8035 ethernet 2188000.ethernet-1:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL) [ 44.192396] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 44.192436] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 55.266004] rc rc1: two consecutive events of type space [lxqt@trial ~]$
  14. OK, unpacked, wrote to SD-card, boot from it ... bingo ... login-prompt ... root/trial, and I'm in. Typing is strange: no QWERTY but ... QWERTZ ... German? Anyway: your image works! So ... next step ... ? PS: non-related: when I login as kodi ... a nice KODI GUI starts up. Nice PS2: with a remote login a lxqt from my Ubuntu laptop, I have a normal QWERTY setup.
  15. Thanks for your offer. I indeed would prefer to have Armbian Ubuntu (instead of Solidrun Debian) running on the Cubox i1-300-D, and I can spend an hour or so on Fedora. Please note: trying all kinds of random parameters is not my thing.
  16. OK, then I'll stick to the Solidrun Debian on the Cubox i1. A pity, but at least Armbian Ubuntu is still running on my Nanopi NEO2. Thank you.
  17. Thank you for replying. So ... as the solidrun Debian images is running well, that is some kind of paradox, as Armbian (not booting through) uses Solidrun as a basis? Or is there still hope? Can I pick some setting from the running Solidrun Debian and copy it to Armbian Ubuntu? I'm just a Linux user, and I know nothing about DT / dtb. sander@cubox-debian:~$ ls -al /boot/ total 21840 drwxr-xr-x 3 root root 4096 Apr 3 11:06 . drwxr-xr-x 18 root root 4096 Feb 14 2019 .. -rw-r--r-- 1 root root 2881153 Sep 3 2019 System.map-4.9.150-imx6-sr -rw-r--r-- 1 root root 3642 Apr 3 11:06 boot.scr -rw-r--r-- 1 root root 2925 Oct 20 10:30 boot.scr.bak -rw-r--r-- 1 root root 170320 Sep 3 2019 config-4.9.150-imx6-sr lrwxrwxrwx 1 root root 41 Apr 3 11:05 dtb -> dtbs/4.9.150-imx6-sr/./imx6dl-cubox-i.dtb lrwxrwxrwx 1 root root 41 Apr 3 11:05 dtb-4.9.150-imx6-sr -> dtbs/4.9.150-imx6-sr/./imx6dl-cubox-i.dtb lrwxrwxrwx 1 root root 36 Oct 20 10:19 dtb-dir -> /usr/lib/linux-image-4.9.150-imx6-sr drwxr-xr-x 3 root root 4096 Oct 20 10:28 dtbs lrwxrwxrwx 1 root root 26 Oct 20 10:19 initrd -> initrd.img-4.9.150-imx6-sr -rw-r--r-- 1 root root 12133931 Apr 3 11:05 initrd.img-4.9.150-imx6-sr lrwxrwxrwx 1 root root 23 Oct 20 10:19 vmlinuz -> vmlinuz-4.9.150-imx6-sr -rwxr-xr-x 1 root root 7149960 Sep 3 2019 vmlinuz-4.9.150-imx6-sr lrwxrwxrwx 1 root root 23 Sep 3 2019 zImage-4.9.150-imx6-sr -> vmlinuz-4.9.150-imx6-sr
  18. Hi, My Solidrun Cubox I1-300-D has been running Armbian for quite some time (Samsung EVO SD card). However, I tried to update/upgrade, and my version was non-supported anymore (19.04?), so time for a fresh new image. I've tried three times (download image from https://www.armbian.com/cubox-i/, sha256 check, burn image with etcher, inspect file structure (looks good), and boot), but each time this happens: "Armbian universal operating system" + text ("Executing script at ...") splash screen, then a black screen, and then my TV says "no signal", and then nothing anymore. At the ethernetconnector, there is red LED on / flashing when the eternetcable is connected. I've let the box run for hours, but no effect. Keyboard eventually connected, but no effect. So ... tips? Is the Cubox I1-300-D still supported? Is there an older image (16.04?) that I can try? Does Armbian write anything to the SD card when it boots? Like "Hello, here I am" or dmesg? Because if so, I could check for that on the SD card in my laptop ... anything else? EDIT: I downloaded and installed sr-imx6-debian-buster-20191020-cli.img from https://images.solid-build.xyz/IMX6/Debian/, and the Cubox boots perfectly from that install. So proof Cubox, SDcard, method, power, HDMI etc are OK.
  19. Guys, Isn't it a ubuntu versus debian thing? Ubuntu has usbmount, debian hasn't. My armbian is Ubuntu based: "Welcome to Ubuntu Cosmic with Armbian Linux 5.1.16-cubox" HTH
  20. I bought a new 32GB SD-card, put Armbian Bionic on it, and succesfully upgraded to Cosmic. FWIW: $ grep -irn cosmic /etc/apt/* | grep -vi "#" /etc/apt/sources.list:1:deb http://ports.ubuntu.com/ cosmic main restricted universe multiverse /etc/apt/sources.list:4:deb http://ports.ubuntu.com/ cosmic-security main restricted universe multiverse /etc/apt/sources.list:7:deb http://ports.ubuntu.com/ cosmic-updates main restricted universe multiverse /etc/apt/sources.list:10:deb http://ports.ubuntu.com/ cosmic-backports main restricted universe multiverse /etc/apt/sources.list.distUpgrade:1:deb http://ports.ubuntu.com/ cosmic main restricted universe multiverse /etc/apt/sources.list.distUpgrade:4:deb http://ports.ubuntu.com/ cosmic-security main restricted universe multiverse /etc/apt/sources.list.distUpgrade:7:deb http://ports.ubuntu.com/ cosmic-updates main restricted universe multiverse /etc/apt/sources.list.distUpgrade:10:deb http://ports.ubuntu.com/ cosmic-backports main restricted universe multiverse and lines still with Bionic (otherwise I got errors): $ grep -irn bionic /etc/apt/* | grep -vi "#" /etc/apt/sources.list.d/armbian.list:1:deb http://apt.armbian.com bionic main bionic-utils bionic-desktop /etc/apt/sources.list.d/armbian.list.distUpgrade:1:deb http://apt.armbian.com bionic main bionic-utils bionic-desktop sander@cubox:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 18.10 Release: 18.10 Codename: cosmic And this is what I wanted to achieve: sander@cubox:~$ openssl version OpenSSL 1.1.1 11 Sep 2018
  21. I don't want X to start (on my Armbian Ubuntu), so in that file, I now have NODM_ENABLED=false ... and X does not start. Great.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines