RaptorSDS
-
Posts
303 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by RaptorSDS
-
-
@balbes150 i wrote yesterday with martin and he told me that he release a new patch for SDIO/MX/MMC controller on 04.05 or 03.05 please can you inform me when your new Image has this patch inside ?
-
14 hours ago, balbes150 said:
Anyone can try the new version of LE 20200503 with the latest version of the kernel from Martin.
i tested it , first try m8s.dtb , HDMI ok , bootscreen and menu works , wlan (externel usb rtl 888x) was detected and wifi found but can not connect to router , mouse/keyboard are a bit slow like a mini lag (your 5.7 desktop is more responsive) , too fast clicking (reconnect to wlan ) ended with crash to bootlogo and freeze , i did not see wpa supplicant folder maybe thats the wifi problem , ! anything other i should test inside image ?
-
3 hours ago, balbes150 said:
Anyone can try the new version of LE 20200503 with the latest version of the kernel from Martin.
thanks to you and martin ; where do you have the image yandisk s8xx ? or yandisk Armbian S812 ?
-
35 minutes ago, Emulti said:
@RaptorSDS No, I am not an experienced Device Tree editor.
But, armed with a copy of the Device Tree specification and fragments of DTB that worked with the old Amlogic kernels and Android, I hope to be able to learn enough to make some missing features work, if there is support in the code.
OK i had same idea and use old dts part and take it to new dts for wifi but still no luck
-
56 minutes ago, balbes150 said:
Perhaps the reason is the errors that I see in the u-boot log when it starts (errors of the u-boot itself). What is connected to the USB ports ?
nothing connect to usb
-
@balbes150 ok next try fresh sd card
mxiii-plus.dtb
its boot to librelec logo and shell , wait about 20 minutes with several restart of box but ,no desktop
mx8.dtb
same behavior like befor , same uart log from last time , black screen no boot
-
1 hour ago, balbes150 said:
After the first start and extension of the partition, the system automatically reboots. This is normal behavior. At the second start, the configuration wizard should appear.
i start with a fresh flash of sd card and make a new run
-
2 hours ago, balbes150 said:
What TV is the device connected to ?
first try was headless
after you question i connect to my Samsung TV ( FHD 32 inch)
with meson8m2-m8s.dtb it is like above no output , same error
with meson8m2-mxiii-plus.dtb i got libreelec logo and shell but after 30 sek restart and than shutdown (log attached)
error was
[ 73.004257] [1087]: Failed to unmount /flash: Device or resource busy
[ 73.010621] systemd-shutdown[1]: Failed to finalize file systems, loop devices, ignoring
[ 73.044806]QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0;than restart
[ 76.956916] [1135]: Failed to unmount /flash: Device or resource busy
[ 76.963401] systemd-shutdown[1]: Failed to finalize file systems, loop devices, ignoringthan shutdown
Spoiler[ 6.887534@0] dwc_otg lm1: irq 63, io mem 0x00000000 [ 6.892429@0] -------hcd->flags.d32 = 0 [ 6.896283@0] Init: Port Power? op_state=1 [ 6.900316@0] Init1: Power Port (0) [ 6.903857@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.910747@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.918111@0] usb usb1: Product: DWC OTG Controller [ 6.922943@0] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd [ 6.928858@0] usb usb1: SerialNumber: lm1 [ 6.933073@0] hub 1-0:1.0: USB hub found [ 6.936769@0] hub 1-0:1.0: 1 port detected [ 6.940892@0] dwc_otg lm0: dwc_otg_driver_probe(e0b8f600) [ 6.946222@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000 [ 6.954762@0] USB (0) use clock source: XTAL input [ 6.960546@0] dwc_otg lm0: base=0xfe040000 [ 6.963597@0] dwc_otg lm0: dwc_otg_device=0xe0dce580 [ 6.988597@0] Core Release: 3.10a [ 6.988653@0] Setting default values for core params [ 6.991248@0] curmode: 1, host_only: 0 [ 7.034971@0] dwc_otg lm0: DMA config: BURST_DEFAULT [ 7.055151@0] Using Buffer DMA mode [ 7.055208@0] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 7.057540@0] Working on port type = OTG [ 7.061440@0] Current port type: SLAVE [ 7.065300@0] dwc_otg lm0: DWC OTG Controller [ 7.069514@0] dwc_otg lm0: new USB bus registered, assigned bus number 2 [ 7.076215@0] dwc_otg lm0: irq 62, io mem 0x00000000 [ 7.081145@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.088080@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.095444@0] usb usb2: Product: DWC OTG Controller [ 7.100277@0] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd [ 7.106191@0] usb usb2: SerialNumber: lm0 [ 7.110392@0] hub 2-0:1.0: USB hub found [ 7.114064@0] hub 2-0:1.0: 1 port detected [ 7.118243@0] Dedicated Tx FIFOs mode [ 7.121974@0] using timer detect id change, e0284000 [ 7.126828@0] boot_device_flag : 1 [ 7.130094@0] ===========================================amlnf_init:643,nand device tree ok,dev-name:nand [ 7.139632@0] Nand PHY driver Version: 2.01.001.0006 (c) 2013 Amlogic Inc. [ 7.146489@1] HOST mode [ 7.146514@0] amlnf_phy_init : amlnf init flag 0 [ 7.146590@0] ######STS IRQ mode for nand driver [ 7.146643@0] NAND device id: 45 de 94 93 76 57 9 4 [ 7.146648@0] detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G [ 7.188948@0] probe: mircon_check_l0l3_mode [ 7.189219@0] bus_cycle=6, bus_timing=7,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 [ 7.195447@0] new oob mode [ 7.198106@0] boot_device_flag = 1 [ 7.202736@0] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 [ 7.204779@1] -------hcd->flags.d32 = 0 [ 7.204800@1] Init: Port Power? op_state=1 [ 7.204802@1] Init1: Power Port (0) [ 7.204804@1] set usb port power on (board gpio 15)! [ 7.234020@0] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 [ 7.242067@0] nand shipped bbt at block 0 [ 7.251044@0] NAND CKECK : arg fbbt: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 0 [ 7.289449@0] NAND CKECK : arg phyp: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 1 [ 7.334613@0] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 [ 7.342812@0] i=0,register --- nand_key [ 7.390797@0] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 [ 7.401130@0] amlnand_phydev_init,1203,phydev->offset=0,phydev->size=1000000 [ 7.407407@0] amlnand_phydev_init,1203,phydev->offset=d000000,phydev->size=26000000 [ 7.415029@0] amlnand_phydev_init,1203,phydev->offset=33000000,phydev->size=53000000 [ 7.422729@0] amlnand_phydev_init,1203,phydev->offset=86000000,phydev->size=17a000000 [ 7.430549@0] nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane [ 7.440168@0] nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane [ 7.449701@0] nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane [ 7.459240@0] nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane [ 7.468767@0] amlnand_add_nftl: [ 7.473710@0] Creating 1 ntd partitions [ 7.478596@0] block_num 76 [ 7.484815@0] ------init_ntd [ 7.489797@0] ntd: Giving out device 0 to nfcache [ 7.494669@0] Creating 5 ntd partitions [ 7.499537@0] block_num 166 [ 7.507374@0] ntd: Giving out device 1 to nfcode [ 7.512176@0] Creating 1 ntd partitions [ 7.516984@0] block_num 756 [ 7.535104@0] ntd: Giving out device 2 to nfdata [ 7.540357@0] Amlogic A/V streaming port init [ 7.545972@0] [tsync_pcr_init]init success. [ 7.550688@0] amvideocap_init_module [ 7.555443@0] amvideocap_probe,amvideocap [ 7.560122@0] cma size undefined. [ 7.564812@0] amvideocap_dev_register buf:0aa00000,size:800000. [ 7.569931@0] regist mpeg12 codec profile [ 7.574659@0] regist mpeg4 codec profile [ 7.579340@0] amvdec_vc1 module init [ 7.584009@0] regist vc1 codec profile [ 7.588613@0] amvdec_h264 module init [ 7.593275@0] regist h264 codec profile [ 7.597890@0] amvdec_h264mvc module init [ 7.602533@0] regist hmvc codec profile [ 7.607135@0] amvdec_h264_4k2k module init [ 7.611750@0] regist h264_4k2k codec profile [ 7.616332@0] amvdec_h265 module init [ 7.620925@0] regist hevc codec profile [ 7.625512@0] regist mjpeg codec profile [ 7.630012@0] amvdec_real module init [ 7.634534@0] amvdec_avs module init [ 7.639119@0] amvenc_avc memory resource undefined. [ 7.643611@0] encode_wq_init. [ 7.648089@0] encode start monitor. [ 7.652596@1] encode workqueue monitor start. [ 7.657231@0] jpegenc module init [ 7.661790@0] picdec share memory resource fail case 1. [ 7.666308@0] picdec: probe of picdec failed with error -14 [ 7.671479@0] alloc_keep_buffer keep_y_addr dfe00000 [ 7.676351@0] alloc_keep_buffer keep_u_addr e0300000 [ 7.681267@0] alloc_keep_buffer keep_v_addr e0400000 [ 7.686218@0] yaddr=dfe00000,u_addr=e0300000,v_addr=e0400000 [ 7.692027@0] create_ge2d_work_queue video task ok [ 7.696711@0] video2_init enter [ 7.701370@0] module init [ 7.705871@0] efuse=========================================== [ 7.710515@0] efuse: device efuse created [ 7.714972@0] efuse-------------------------------------------- [ 7.720321@0] SARADC Driver init. [ 7.724821@0] __saradc_probe__ [ 7.729842@0] saradc calibration: ref_val = 509 [ 7.734228@0] saradc calibration: ref_nominal = 512 [ 7.738633@0] saradc calibration: coef = 4096 [ 7.743157@0] irblaster probe [ 7.747613@0] Remote Driver [ 7.752010@0] Remote platform_data g_remote_base=fe600580 [ 7.756404@0] set drvdata completed [ 7.760745@0] device_create_file completed [ 7.765384@0] input: aml_keypad as /devices/platform/meson-remote/input/input0 [ 7.771472@0] input_register_device completed [ 7.775905@0] [0xffffff00] = 0x1dd0190 [ 7.780270@0] [0xffffff04] = 0xf800ca [ 7.784596@0] [0xffffff08] = 0x82006e [ 7.788914@0] [0xffffff0c] = 0x3c0030 [ 7.793195@0] [0xffffff10] = 0x30fa0013 [ 7.797481@0] [0xffffff18] = 0x6f19000 [ 7.801744@0] [0xffffff1c] = 0xbe40 [ 7.805995@0] [0x0] = 0xfa00a0 [ 7.810186@0] [0x4] = 0xfa00a0 [ 7.814321@0] [0x8] = 0xfa00a0 [ 7.818446@0] [0xc] = 0x640030 [ 7.822544@0] [0x10] = 0x30fa0013 [ 7.826647@0] [0x18] = 0x961b800 [ 7.830710@0] [0x1c] = 0x9740 [ 7.834747@0] [0x20] = 0x104 [ 7.838774@0] [0x24] = 0x0 [ 7.842752@0] [0x28] = 0x0 [ 7.846730@0] set_remote_mode[69] [ 7.850701@0] remote config major:232 [ 7.854747@0] physical address:0x204ec000 [ 7.858773@0] ADC Keypad Driver init. [ 7.862818@0] ==touch_ts_init== [ 7.866856@0] ==ft5x0x_ts_init== [ 7.870784@0] ==goodix_ts_init== [ 7.874697@0] i2c-core: driver [gslx680_compatible] using legacy suspend method [ 7.880278@0] i2c-core: driver [gslx680_compatible] using legacy resume method [ 7.887489@0] !!!ntp_ts: ret = 0. [ 7.891379@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>. [ 7.897282@0] i2c-core: driver [ct36x] using legacy suspend method [ 7.903404@0] i2c-core: driver [ct36x] using legacy resume method [ 7.909489@0] VTL ct36x TouchScreen driver End. [ 7.913978@0] ==gsl_ts_init== [ 7.917942@0] ret=0 [ 7.921932@0] i2c-core: driver [mir3da] using legacy suspend method [ 7.926426@0] i2c-core: driver [mir3da] using legacy resume method [ 7.932588@0] i2c-core: driver [lis3dh_acc] using legacy suspend method [ 7.939171@0] i2c-core: driver [lis3dh_acc] using legacy resume method [ 7.945703@0] i2c-core: driver [bma222] using legacy suspend method [ 7.951896@0] i2c-core: driver [bma222] using legacy resume method [ 7.958100@0] i2c-core: driver [dmard06] using legacy suspend method [ 7.964378@0] i2c-core: driver [dmard06] using legacy resume method [ 7.970655@0] lsm303d driver: init [ 7.974408@0] i2c-core: driver [dmard10] using legacy suspend method [ 7.980346@0] i2c-core: driver [dmard10] using legacy resume method [ 7.986607@0] stk8313_init [ 7.990301@0] ======stk831x init ok====== [ 7.993991@0] stk831x_init [ 7.997702@0] mxc622x accelerometer driver: init [ 8.001424@0] i2c-core: driver [mxc622x] using legacy suspend method [ 8.006868@0] i2c-core: driver [mxc622x] using legacy resume method [ 8.013095@0] mxc6255xc accelerometer driver: init [ 8.017894@0] i2c-core: driver [mxc6255xc] using legacy suspend method [ 8.024362@0] i2c-core: driver [mxc6255xc] using legacy resume method [ 8.030797@0] stk8baxx_init: start [ 8.034541@0] cm3217 v.1.0.0.1 [ 8.038169@0] i2c-core: driver [elan_epl6814] using legacy suspend method [ 8.043953@0] i2c-core: driver [elan_epl6814] using legacy resume method [ 8.050667@0] i2c-core: driver [LTR501] using legacy suspend method [ 8.056884@0] i2c-core: driver [LTR501] using legacy resume method [ 8.063075@0] GPIO Keypad Driver init. [ 8.066827@0] ==gpio_key_probe== [ 8.070386@0] gpio request set to High-Z status [ 8.074478@0] power key(116) registed. [ 8.078296@0] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1 [ 8.085650@0] gpio keypad register input device completed. [ 8.091112@0] gpio keypad major:231 [ 8.094837@0] spi_nor_init [ 8.098505@0] amlogic_spi_nor_probe: [ 8.102119@0] amlogic_spi->state_name:default [ 8.105808@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated [ 8.112818@0] check_storage_device : spi boot_device_flag : -1 [ 8.118609@0] spi_nor_probe [ 8.122255@0] spi_nor_probe 629 boot_device_flag -1 : do not init spi [ 8.127795@0] spi_nor: probe of apollospi:32766 failed with error -12 [ 8.134190@0] amlogic_spi_nor_probe over [ 8.138194@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 8.147933@0] host->base fe108c20 [ 8.151731@0] pdata->caps 7 [ 8.155514@0] pdata->caps2 0 [ 8.159261@0] get property: port, value:0x00000001 [ 8.163882@0] get property: ocr_avail, value:0x00200000 [ 8.170410@0] get property: f_min, value:0x000493e0 [ 8.176911@0] get property: f_max, value:0x02faf080 [ 8.183398@0] get property: f_max_w, value:0x02faf080 [ 8.189913@0] get property: max_req_size, value:0x00020000 [ 8.196414@0] get property: irq_in, value:0x00000003 [ 8.202901@0] get property: irq_out, value:0x00000005 [ 8.209421@0] get property: gpio_cd, str:CARD_6 [ 8.215400@0] get property: gpio_ro, str:GPIOZ_0 [ 8.221452@0] get property: pinname, str:sd [ 8.227104@0] get property: jtag_pin, str:CARD_0 [ 8.233067@0] get property: card_type, value:0x00000005 [ 8.239590@0] get property: gpio_dat3, str:CARD_4 [ 8.245578@0] normal card in [ 8.284810@0] reg:2620,clearmask=80008,setmask=10001 [ 8.288513@0] reg:2621,clearmask=ff000000,set pin=64 [ 8.292831@0] reg:2623,clearmask=7000,setmask=7 [ 8.297371@0] reg:2620,clearmask=200020,setmask=1 [ 8.302106@0] reg:2622,clearmask=ff00,set pin=64 [ 8.306700@0] reg:2623,clearmask=700000,setmask=7 [ 8.311542@0] pdata->caps 107 [ 8.315268@0] pdata->caps2 0 [ 8.318934@0] get property: port, value:0x00000000 [ 8.323701@0] get property: ocr_avail, value:0x00200000 [ 8.330217@0] get property: f_min, value:0x000493e0 [ 8.336733@0] get property: f_max, value:0x02faf080 [ 8.343216@0] get property: max_req_size, value:0x00020000 [ 8.349735@0] get property: pinname, str:sdio [ 8.355535@2] get property: card_type, value:0x00000003 [ 8.385317@0] sd: new high speed SDHC card at address aaaa, clock 35416666, 4-bit-bus-width [ 8.391888@0] mmcblk0: sd:aaaa SL16G 14.8 GiB [ 8.425595@0] mmcblk0: p1 p2 [ 8.484778@2] [aml_sdio_probe] aml_sdio_probe() success! [ 8.489564@2] host->base fe108e00 [ 8.493277@2] pdata->caps 80000547 [ 8.496945@2] pdata->caps2 20 [ 8.500591@2] get property: port, value:0x00000005 [ 8.505153@2] get property: ocr_avail, value:0x00200080 [ 8.511645@2] get property: f_min, value:0x000493e0 [ 8.518154@2] get property: f_max, value:0x05f5e100 [ 8.524648@2] get property: max_req_size, value:0x00020000 [ 8.531160@2] get property: pinname, str:emmc [ 8.536979@2] get property: card_type, value:0x00000001 [ 8.543459@2] get property: gpio_dat3, str:BOOT_3 [ 8.549448@2] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=7 [ 8.555774@2] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config! [ 8.614777@2] [aml_sdhc_probe] aml_sdhc_probe() success! [ 8.618516@2] [dsp]DSP start addr 0xc5e00000 [ 8.622356@2] [dsp]register dsp to char divece(257) [ 8.627389@2] amlogic audio spdif interface device init! [ 8.632534@2] name=nand_key nand_key [ 8.636936@2] register_aes_algorithm:488,new way [ 8.642000@2] key name:keyexample, key data:1234567890 [ 8.646407@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0 [ 8.654258@2] [AML1216]call aml1216_battery_init, ret = 0 [ 8.658195@2] [AML1218]call aml1218_battery_init, ret = 0 [ 8.663269@2] [RN5T618]call rn5t618_battery_init, ret = 0 [ 8.668630@2] vdin_drv_init: major 229 [ 8.672624@2] vdin0 mem_start = 0x8100000, mem_size = 0x100000 [ 8.678165@2] vdin_drv_probe: driver initialized ok [ 8.683076@2] vdin1 mem_start = 0x8200000, mem_size = 0x1000000 [ 8.688906@2] vdin_drv_probe: driver initialized ok [ 8.693807@2] amvdec_656in module: init. [ 8.697798@2] amvdec_656in_init_module:major 228 [ 8.702429@2] amvdec_656in probe ok. [ 8.706595@2] amvdec_csi probe ok. [ 8.710576@2] [viuin..]viuin_init_module viuin module init [ 8.714727@2] [viuin..]viuin_probe probe ok. [ 8.719047@2] [isp..]isp_probe isp probe ok. [ 8.723138@2] sii5293, sii5293drv driver starting! [ 8.727906@2] sii5293, Version: CP5293-v0.90.01, Build: 16:47:42-Apr 14 2017 [ 8.735009@2] sii5293, register_chrdev sii5293 [ 8.739794@2] [sii9293_workqueue_init] workqueue init ok! [ 8.744807@2] sii5293, Starting sii-5293 [ 8.748879@2] uart_ao is using the pin GPIOAO_0 as pinmux [ 8.754075@2] pinmux-m8 pinmux: request() failed for pin 0 [ 8.759546@2] pinmux-m8 pinmux: pin-0 (amlogic:gpio:0) status -22 [ 8.765611@2] HalInit gpio_request for GPIO 0 (H/W Reset) failed, status: -22 [ 8.772708@2] Initialization of HAL failed, error code: 1 [ 8.778122@2] sii5293 mhldrv initialized failed ! [ 8.782917@2] sii5293 [SiiMhlInit] something wrong ! [ 8.788169@2] amaudio2: device amaudio2 created [ 8.792358@2] Error: Didn't get power valid value --- wifi_power_probe 424 [ 8.799074@2] Error: Didn't get suspend_power_off value --- wifi_power_probe 441 [ 8.806440@2] wifi_power power_gpio is 6 [ 8.810583@2] wifi_power power_gpio2 is 123 [ 8.814836@2] amlogic rfkill init [ 8.818963@2] enter bt_probe of_node [ 8.823055@2] not get gpio_en [ 8.827128@2] not get gpio_wake [ 8.854832@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill [ 8.858928@2] clock_32k_pin(122) : (null) [ 8.863010@2] clock_32k_pin(122) : sdio_wifi [ 8.975799@2] aml_aes aml_aes: Aml AES [ 8.980177@2] aml_tdes aml_tdes: Aml TDES [ 8.984563@2] enter rt5616_modinit [ 8.988702@2] dummy_codec_platform_probe [ 8.992846@2] == ES8323 == es8323_modinit() [ 8.996959@2] pcm2bt_codec_probe ok! [ 9.001318@2] enter aml_i2s_dai_probe [ 9.005322@2] i2s get no clk src setting in dts, use the default mpll 0 [ 9.010314@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000 [ 9.018316@2] enter aml_pcm_dai_probe [ 9.022438@2] [aml-spdif-dai]enter aml_dai_spdif_init [ 9.026881@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4 [ 9.033975@2] audio_set_958_clk, freq=4, [ 9.038099@2] IEC958 16bit [ 9.042192@2] hdmitx: audio: aout notify rate 48000 [ 9.046300@2] hdmitx: audio: aout notify size 16 [ 9.050353@2] hdmitx: audio: aout notify format CT_PCM [ 9.055234@2] hdmitx: audio: audio channel num is 1 [ 9.060064@2] hdmitx: audio: SPDIF [ 9.064098@2] hdmitx: audio: current VIC: 0 [ 9.068140@2] hdmitx: audio: audio sample rate: 3 [ 9.072282@2] hdmitx: audio: set audio N para [ 9.076629@2] hdmitx: audio: PCM out to HDMI [ 9.080864@2] hdmitx: audio: i2s_to_spdif_flag:1 [ 9.085553@2] hdmitx: audio: Enable audio spdif to HDMI [ 9.090748@2] hdmitx: audio: Audio Type: PCM [ 9.095042@2] hdmitx: audio: set audio param [ 9.099303@2] [aml-spdif-dai]aml_spdif_probe [ 9.103589@2] test codec dummy_codec [ 9.107406@2] using external codec, index = 1 [ 9.111375@2] using external dummy codec [ 9.115374@2] enter spdif_dit_probe [ 9.119189@2] aml_spdif_unmute [ 9.123142@2] codec_name = dummy_codec.0 [ 9.127239@0] enter aml_set_bias_level level: 1 [ 9.131160@0] enter aml_set_bias_level level: 1 [ 9.131175@2] enter aml_set_bias_level level: 1 [ 9.131179@2] enter aml_set_bias_level level: 1 [ 9.131180@2] enter aml_set_bias_level level: 2 [ 9.148431@0] enter aml_set_bias_level level: 2 [ 9.152943@2] enter aml_asoc_init [ 9.156768@2] p_aml_audio->hp_disable=1 [ 9.160578@2] falied to get spk event delay time paraments from dts file [ 9.166775@2] spk_event delay_time = 0 [ 9.171695@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288 [ 9.179756@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536 [ 9.188202@2] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok [ 9.196220@0] enter aml_set_bias_level level: 1 [ 9.196224@1] enter aml_set_bias_level level: 1 [ 9.196229@1] enter aml_set_bias_level level: 2 [ 9.209707@0] enter aml_set_bias_level level: 2 [ 9.214306@2] enter aml_pcm2bt_preallocate_dma_buffer stream: 0 [ 9.220297@2] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: ef210000 buf->addr: 0x2f410000 buf->bytes: 65536 [ 9.230575@2] enter aml_pcm2bt_preallocate_dma_buffer stream: 1 [ 9.236663@2] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: ef260000 buf->addr: 0x2f460000 buf->bytes: 65536 [ 9.246961@2] aml_snd_m8 aml_m8_sound_card.5: pcm2bt-pcm <-> aml-pcm-dai.0 mapping ok [ 9.254885@2] enter aml_set_bias_level level: 1 [ 9.259343@2] enter aml_set_bias_level level: 2 [ 9.263884@2] enter aml_set_bias_level level: 1 [ 9.268369@2] enter aml_set_bias_level level: 2 [ 9.274042@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288 [ 9.282122@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef3a0000, addr=2f5a0000, size=65536 [ 9.290574@1] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok [ 9.298480@0] enter aml_set_bias_level level: 1 [ 9.298490@2] enter aml_set_bias_level level: 1 [ 9.298492@2] enter aml_set_bias_level level: 2 [ 9.311993@0] enter aml_set_bias_level level: 2 [ 9.316577@1] enter aml_set_bias_level level: 1 [ 9.320975@1] enter aml_set_bias_level level: 2 [ 9.325511@1] enter aml_set_bias_level level: 1 [ 9.329989@1] enter aml_set_bias_level level: 2 [ 9.335088@0] enter aml_set_bias_level level: 1 [ 9.335097@1] enter aml_set_bias_level level: 1 [ 9.335099@1] enter aml_set_bias_level level: 2 [ 9.348057@0] enter aml_set_bias_level level: 2 [ 9.352620@1] -----ext_codec=1--- [ 9.356654@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0 [ 9.361903@1] GACT probability NOT on [ 9.365930@1] Mirror/redirect action on [ 9.369926@1] u32 classifier [ 9.373900@1] Actions configured [ 9.377881@1] Netfilter messages via NETLINK v0.30. [ 9.381899@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.387662@1] ctnetlink v0.93: registering with nfnetlink. [ 9.392820@1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 9.399894@1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 9.406117@1] xt_time: kernel timezone is -0000 [ 9.410451@1] ipip: IPv4 over IPv4 tunneling driver [ 9.415582@1] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.420791@1] arp_tables: (C) 2002 David S. Miller [ 9.425496@1] TCP: cubic registered [ 9.429543@1] Initializing XFRM netlink socket [ 9.433893@1] NET: Registered protocol family 10 [ 9.438479@1] mip6: Mobile IPv6 [ 9.442532@1] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.446773@1] sit: IPv6 over IPv4 tunneling driver [ 9.451935@1] NET: Registered protocol family 17 [ 9.456063@1] NET: Registered protocol family 15 [ 9.460605@1] Bridge firewalling registered [ 9.464831@1] Bluetooth: RFCOMM TTY layer initialized [ 9.469767@1] Bluetooth: RFCOMM socket layer initialized [ 9.475048@1] Bluetooth: RFCOMM ver 1.11 [ 9.479090@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.484398@1] Bluetooth: BNEP filters: protocol multicast [ 9.489788@1] Bluetooth: BNEP socket layer initialized [ 9.494900@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 9.500961@1] Bluetooth: HIDP socket layer initialized [ 9.506094@1] l2tp_core: L2TP core driver, V2.0 [ 9.510585@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 9.515529@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 9.521251@1] l2tp_netlink: L2TP netlink interface [ 9.526031@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 9.532091@1] l2tp_debugfs: L2TP debugfs support [ 9.536677@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 9.543290@1] NET: Registered protocol family 35 [ 9.548290@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 9.555689@1] Registering SWP/SWPB emulation handler [ 9.560593@1] enter meson_pm_init [ 9.564726@1] enter meson_pm_probe! [ 9.568764@1] ---meson_pm_probe----set output pin success [ 9.572815@1] meson_pm_probe done ! [ 9.577120@1] aml_istbt_dev_ready NULL [ 9.581388@1] file system registered [ 9.585969@1] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 9.591443@1] android_usb gadget: Number of LUNs=2 [ 9.596224@1] lun0: LUN: removable file: (no medium) [ 9.601238@1] lun1: LUN: removable file: (no medium) [ 9.606402@1] android_usb gadget: android_usb ready [ 9.611529@1] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 9.618520@1] ### dt-test ### No testcase data in device tree; not running tests [ 9.625955@1] meson_cpufreq_probe:SYSPLL request to be fixed [ 9.631491@1] meson_cpufreq_probe:SYSPLL fix to target:1608000 [ 9.637309@1] meson_cpufreq_probe, adj ok [ 9.641405@1] meson_cpufreq: no voltage_control prop [ 9.646233@1] voltage_control = 0 [ 9.650361@1] [DVFS]aml_dvfs_do_voltage_change, no dvfs driver [ 9.655376@1] <<-GTP-INFO->> GTP driver installing... [ 9.660577@1] hdmitx: cec: CEC init [ 9.664859@1] input: cec_input as /devices/virtual/input/input2 [ 9.669807@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1[ 9.675197@1] hdmitx: cec: cec_func_config: 0x0; P_AO_DEBUG_REG0:0x0 [ 9.683682@1] ALSA device list: [ 9.692071@1] #0: AML-M8AUDIO [ 9.696950@1] Freeing unused kernel memory: 396K (c0be6000 - c0c49000) [ 10.452638@3] force enable DISCARD here for ext4 fs [ 10.475847@3] checked enable EXT4 DISCARD here [ 10.480379@3] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard [ 10.488978@3] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback [ 10.981593@2] systemd[1]: System time before build time, advancing clock. [ 11.015602@2] systemd[1]: Failed to insert module 'autofs4': No such file or directory [ 11.058866@2] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 11.064804@0] key 116 up [ 11.081762@2] systemd[1]: Detected architecture arm. [ 11.117728@2] systemd[1]: Set hostname to <vegas812>. [ 11.167514@2] config uart_ao_ttyS0:: Character length 8bits/char o▒ 11.184808@2] Changing uart_ao_ttyS0: baud from 0 to 115200 [ 11.619560@2] systemd[1]: Reached target Encrypted Volumes. [ 11.630462@2] systemd[1]: Listening on udev Kernel Socket. [ 11.640904@2] systemd[1]: Reached target Remote File Systems (Pre). [ 11.651941@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 11.664794@2] systemd[1]: Created slice User and Session Slice. [ 11.675596@2] systemd[1]: Listening on Journal Socket. [ 11.686142@2] systemd[1]: Listening on Syslog Socket. [ 11.696653@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.709253@2] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.720435@2] systemd[1]: Created slice System Slice. [ 11.731292@2] systemd[1]: Reached target Slices. [ 11.743492@2] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 11.760166@2] systemd[1]: Mounting Debug File System... [ 11.773352@2] systemd[1]: Starting Set console keymap... [ 11.785155@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.812052@2] systemd[1]: Starting Load Kernel Modules... [ 11.824410@2] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 11.838487@2] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 11.852231@2] systemd[1]: Starting Nameserver information manager... [ 11.864757@2] systemd[1]: Reached target Remote File Systems. [ 11.877203@2] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 11.890196@2] systemd[1]: Listening on udev Control Socket. [ 11.902373@2] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.907619@0] aml_nftl_dev: module license 'Proprietary' taints kernel. [ 11.908456@0] boot_device_flag : 1 [ 11.908458@0] register_ntd_blktrans start [ 11.908462@0] ntd device 250! [ 11.908464@0] ntd->name: nfcache [ 11.908470@0] adjust_block_num : 4,reserved_block_ratio 10 [ 11.908473@0] nftl version 160811a [ 11.908474@0] nftl build Aug 11 2016_14:19:06 [ 11.909846@0] calculate device -- nfcache [ 11.909849@0] get the phy_dev_size=20000000H tmp_off_size=200000H phy_dev_block=41H [ 11.909852@0] nftl start:size_in_blk=76,free_block_num=11 [ 11.909991@0] first [ 11.990786@2] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.994819@0] average_erase_count:0 [ 11.994824@0] second 74,65 [ 11.994826@0] part->max_discard_block = 4 [ 12.025538@2] systemd[1]: Starting Restore / save the current clock... [ 12.028752@1] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro [ 12.047408@2] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported. [ 12.069765@2] systemd[1]: Mounted Debug File System. [ 12.082798@2] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 12.085160@0] all block full!! [ 12.085162@0] all discard block full!! [ 12.085179@0] free block cnt = 62 [ 12.085181@0] total write 0 pages [ 12.085183@0] new current block is 71 [ 12.085184@0] total discard page count is 0 [ 12.085187@0] create_part_list:1228,current_used_discard_block=0,current_discard_block_used_count=188 [ 12.085454@0] unmappig_pages=15767,discarded_pages=0,mapping_pages=873 [ 12.085455@0] nftl ok! [ 12.086347@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.158176@0] aml_nftl_add_ntd ok [ 12.164343@0] ntd device 250! [ 12.164345@0] ntd->name: nfcode [ 12.164351@0] adjust_block_num : 4,reserved_block_ratio 10 [ 12.164354@0] nftl version 160811a [ 12.164356@0] nftl build Aug 11 2016_14:19:06 [ 12.167332@0] size_in_blk 166; total_block 163; [ 12.167334@0] calculate device -- nfcode [ 12.167338@0] get the phy_dev_size=48000000H tmp_off_size=480000H phy_dev_block=91H [ 12.167340@0] nftl start:size_in_blk=163,free_block_num=18 [ 12.167569@0] first [ 12.235699@2] systemd[1]: Started Set console keymap. [ 12.250937@2] systemd[1]: Started Remount Root and Kernel File Systems. [ 12.265760@2] systemd[1]: Started Restore / save the current clock. [ 12.280927@2] systemd[1]: Started Nameserver information manager. [ 12.297480@2] systemd[1]: Time has been changed [ 12.304225@2] systemd[1]: Reached target Network (Pre). [ 12.319047@2] systemd[1]: Starting Load/Save Random Seed... [ 12.333416@2] systemd[1]: Activating swap /var/swap... [ 12.348601@0] average_erase_count:1 [ 12.355167@0] second 151,145 [ 12.361408@0] part->max_discard_block = 4 [ 12.379710@2] systemd[1]: Starting udev Coldplug all Devices... [ 12.394582@2] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.409043@2] systemd[1]: Started Load/Save Random Seed. [ 12.510913@2] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SS [ 12.519564@2] systemd[1]: Activated swap /var/swap. [ 12.532851@2] systemd[1]: Reached target Swap. [ 12.546388@2] systemd[1]: Started Create Static Device Nodes in /dev. [ 12.555818@0] all block full!! [ 12.555820@0] all discard block full!! [ 12.555867@0] free block cnt = 44 [ 12.555872@0] total write 0 pages [ 12.555875@0] new current block is 23 [ 12.555876@0] total discard page count is 0 [ 12.555879@0] create_part_list:1228,current_used_discard_block=22,current_discard_block_used_count=271 [ 12.556443@0] unmappig_pages=9795,discarded_pages=0,mapping_pages=27325 [ 12.556445@0] nftl ok! [ 12.557514@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.558039@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.558584@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.559077@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.559491@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 12.559813@0] aml_nftl_add_ntd ok [ 12.559816@0] ntd device 250! [ 12.559818@0] ntd->name: nfdata [ 12.559826@0] adjust_block_num : 4,reserved_block_ratio 10 [ 12.559829@0] nftl version 160811a [ 12.559831@0] nftl build Aug 11 2016_14:19:06 [ 12.574553@0] size_in_blk 756; total_block 750; [ 12.574556@0] calculate device -- nfdata [ 12.575544@0] the space is size = -1first [ 12.704454@2] systemd[1]: Starting udev Kernel Device Manager... [ 12.716770@2] systemd[1]: Reached target Local File Systems (Pre). [ 12.739364@2] systemd[1]: Mounting /tmp... [ 12.758184@2] systemd[1]: Mounted /tmp. [ 12.795765@2] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 12.810388@2] systemd[1]: Starting Journal Service... [ 12.822198@2] systemd[1]: haveged.service: Main process exited, code=exited, status=225/NETWORK [ 12.831450@2] systemd[1]: haveged.service: Unit entered failed state. [ 12.837824@2] systemd[1]: haveged.service: Failed with result 'exit-code'. [ 12.845466@2] systemd[1]: Started udev Coldplug all Devices. [ 12.881232@2] systemd[1]: Started udev Kernel Device Manager. [ 12.887901@1] aml_nftl_open ok! [ 12.998237@1] systemd[1]: Started Journal Service. [ 13.051824@1] systemd-journald[268]: Received request to flush runtime journal from PID 1 [ 13.116296@0] aml_nftl_open ok! [ 13.118094@3] aml_nftl_open ok! [ 13.119219@2] aml_nftl_open ok! [ 13.121304@3] aml_nftl_open ok! [ 13.121851@1] aml_nftl_open ok! [ 13.279598@3] aml_nftl_open ok! [ 13.279625@1] aml_nftl_open ok! [ 13.280498@0] aml_nftl_open ok! [ 13.288088@0] aml_nftl_open ok! [ 13.288384@2] aml_nftl_open ok! [ 13.289824@1] aml_nftl_open ok! [ 13.362758@0] aml_audio_i2s_mute_flag: flag=0 [ 13.368087@0] aml_audio_set_spdif_mute: flag=0 [ 13.368089@0] aml_spdif_unmute [ 13.368099@0] aml_m8_set_spk: aml_m8_spk_enabled=0 [ 13.467752@1] BT_RADIO going: on [ 13.473490@1] BCM_BT: going ON [ 13.513914@0] as an end receiver [ 13.518548@1] ionvideo open [ 13.518824@1] ionvideo_stop_generating!!!! [ 13.518837@1] ionvideo release [ 13.544115@2] found discard block:754 [ 13.545217@2] average_erase_count:8 [ 13.545234@2] second 749,678 [ 13.545235@2] part->max_discard_block = 4 [ 13.514309@2] amlvideo openamlvideo close[ 14.151115@0] eth0: device MAC address c4:c0:96:91:ee:c1 [ 14.174313@0] mask interrupts MMC [ 14.178950@0] mask interrupts MMC [ 14.183339@0] mask interrupts MMC [ 14.187926@0] stmmac_open: failed PTP initialisation [ 14.477914@2] all block full!! [ 14.483200@2] currnet_discard_block1:754 [ 14.580112@2] reach the last discard page:70 [ 14.584649@2] free block cnt = 42 [ 14.588723@2] total write 0 pages [ 14.592732@2] new current block is 618 [ 14.596701@2] total discard page count is 70 [ 14.600651@2] create_part_list:1228,current_used_discard_block=754,current_discard_block_used_count=2 [ 14.610959@2] unmappig_pages=92931,discarded_pages=19869,mapping_pages=60768 [ 14.616467@2] nftl ok! [ 14.621971@2] Enable QUEUE_FLAG_DISCARD for NFTL [ 14.626590@2] aml_nftl_add_ntd ok [ 14.628424@1] aml_nftl_open ok! [ 14.635086@2] init_aml_nftl end [ 14.938050@2] RTL871X: module init start [ 14.942059@2] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844 [ 14.947606@2] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844 [ 14.953767@2] wifi_setup_dt [ 14.958006@2] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 14.962128@2] interrupt_pin(133) : (null) [ 14.966467@2] reg:2620,clearmask=100010,setmask=0 [ 14.970674@2] reg:2622,clearmask=ff,set pin=133 [ 14.975160@2] reg:2623,clearmask=70000,setmask=4 [ 14.980068@2] interrupt_pin(133) : sdio_wifi [ 14.984285@2] power_on_pin(6) : (null) [ 14.988728@2] power_on_pin(6) : sdio_wifi [ 14.992991@2] power_on_pin2(123) : (null) [ 14.997296@2] power_on_pin2(123) : sdio_wifi [ 15.001548@2] ######platform_wifi_power_on: [ 15.005771@2] WIFI Disable! 6 [ 15.514795@2] WIFI Enable! 6 [ 17.024793@1] [aml_sdio_timeout] time_start_cnt:999 [ 17.024793@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 Connect Timeout [ 17.199494@1] Device Not Connected/Responding [ 18.054786@1] [aml_sdio_timeout] time_start_cnt:991 [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 19.084795@0] [aml_sdio_timeout] time_start_cnt:991 [ 19.084795@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 19.137963@0] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width [ 19.146961@0] The func support sdio data1 irq! [ 19.162291@2] [sdio_reinit] finish [ 19.237797@0] RTL871X: rtw_ndev_init(wlan0) [ 19.244709@0] RTL871X: module init ret=0 QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25586 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12262 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218348 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: No USB device found ! Error, couldn't init Lowlevel part ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 167 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-m8s.dtb 25398 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 Loading Kernel Image ... OK OK uboot time: 5339822 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff335 ... OK Starting kernel ... [ 0.118898] lima d00c0000.gpu: IRQ ppmmu3 not found [ 0.119026] lima d00c0000.gpu: IRQ ppmmu7 not found [ 0.123171] lima d00c0000.gpu: IRQ pp3 not found [ 0.127755] lima d00c0000.gpu: IRQ pp7 not found [ 0.132591] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 0.152317] dummy-irq: no IRQ given. Use irq=N [ 0.154078] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.167211] thermal thermal_zone0: binding zone soc with cdev thermal-cpufreq-0 failed:-22 [ 0.198471] remoteproc remoteproc0: request_firmware failed: -2 [ 0.200842] no UART detected at 0x1 [ 0.354198] meson-drm d0100000.vpu: meson_vclk_setup(1, 148500, 148500, 148500, 0) [ 0.354239] meson-drm d0100000.vpu: [drm] *ERROR* Failed to setup vendor infoframe: -22 [ 1.613548] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 ▒QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25586 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12252 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218350 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: No USB device found ! Error, couldn't init Lowlevel part ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 167 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-m8s.dtb 25398 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 Loading Kernel Image ... OK OK uboot time: 5284433 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff335 ... OK Starting kernel ... [ 0.120619] lima d00c0000.gpu: IRQ ppmmu3 not found [ 0.120747] lima d00c0000.gpu: IRQ ppmmu7 not found [ 0.124905] lima d00c0000.gpu: IRQ pp3 not found [ 0.129438] lima d00c0000.gpu: IRQ pp7 not found [ 0.134317] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 0.154017] dummy-irq: no IRQ given. Use irq=N [ 0.155832] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.168806] thermal thermal_zone0: binding zone soc with cdev thermal-cpufreq-0 failed:-22 [ 0.200954] remoteproc remoteproc0: request_firmware failed: -2 [ 0.203252] no UART detected at 0x1 [ 0.356187] meson-drm d0100000.vpu: meson_vclk_setup(1, 148500, 148500, 148500, 0) [ 0.356229] meson-drm d0100000.vpu: [drm] *ERROR* Failed to setup vendor infoframe: -22 [ 1.613441] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25586 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12261 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218495 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: No USB device found ! Error, couldn't init Lowlevel part ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 174 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-mxiii-plus.dtb 24824 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 Loading Kernel Image ... OK OK uboot time: 5334261 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff0f7 ... OK Starting kernel ... [ 0.157934] dummy-irq: no IRQ given. Use irq=N [ 0.159694] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.169732] VCCK: failed to get the current voltage(-6) [ 0.169771] rn5t618-regulator rn5t618-regulator: failed to register DCDC1 regulator [ 0.209208] remoteproc remoteproc0: request_firmware failed: -2 [ 0.209895] meson-saradc c1108680.adc: failed to get vref regulator [ 0.217472] no UART detected at 0x1 [ 0.373345] meson-drm d0100000.vpu: meson_vclk_setup(1, 148500, 148500, 148500, 0) [ 0.373386] meson-drm d0100000.vpu: [drm] *ERROR* Failed to setup vendor infoframe: -22 [ 0.644435] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 [ 0.647522] meson-saradc c1108680.adc: failed to get vref regulator [ 0.667841] meson-saradc c1108680.adc: failed to get vref regulator LibreELEC:/ # dir /bin/sh: dir: not found LibreELEC:/ # cd .. LibreELEC:/ # cd .. LibreELEC:/ # dir /bin/sh: dir: not found LibreELEC:/ # lsmod Module Size Used by LibreELEC:/ # lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub LibreELEC:/ # ls[ 73.004257] [1087]: Failed to unmount /flash: Device or resource busy [ 73.010621] systemd-shutdown[1]: Failed to finalize file systems, loop devices, ignoring [ 73.044806]QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25598 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12258 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218491 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: No USB device found ! Error, couldn't init Lowlevel part ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 174 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-mxiii-plus.dtb 24824 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 Loading Kernel Image ... OK OK uboot time: 5253148 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff0f7 ... OK Starting kernel ... [ 0.148911] dummy-irq: no IRQ given. Use irq=N [ 0.150702] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.160712] VCCK: failed to get the current voltage(-6) [ 0.160751] rn5t618-regulator rn5t618-regulator: failed to register DCDC1 regulator [ 0.200221] remoteproc remoteproc0: request_firmware failed: -2 [ 0.200907] meson-saradc c1108680.adc: failed to get vref regulator [ 0.208469] no UART detected at 0x1 [ 0.365268] meson-drm d0100000.vpu: meson_vclk_setup(1, 148500, 148500, 148500, 0) [ 0.365309] meson-drm d0100000.vpu: [drm] *ERROR* Failed to setup vendor infoframe: -22 [ 0.639419] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 [ 0.642507] meson-saradc c1108680.adc: failed to get vref regulator [ 0.663025] meson-saradc c1108680.adc: failed to get vref regulator LibreELEC:/ # desmsh /bin/sh: desmsh: not found LibreELEC:/ # desmsg /bin/sh: desmsg: not found LibreELEC:/ # desmesg /bin/sh: desmesg: not found LibreELEC:/ # d[ 76.956916] [1135]: Failed to unmount /flash: Device or resource busy [ 76.963401] systemd-shutdown[1]: Failed to finalize file systems, loop devices, ignoring
-
UART LOG with meson8m2-m8s.dtb
SpoilerQA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25587 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12264 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218338 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: Fullspeed device found ! scanning bus for devices... dwc_otg: submit_control_msg: control status phase error (ret = -1) No USB Device found scanning bus for storage devices... 0 Storage Device(s) found ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 167 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-m8s.dtb 25398 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 board_usb_stop cfg: 0 Loading Kernel Image ... OK OK uboot time: 6418449 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff335 ... OK Starting kernel ... [ 0.119768] lima d00c0000.gpu: IRQ ppmmu3 not found [ 0.119896] lima d00c0000.gpu: IRQ ppmmu7 not found [ 0.124051] lima d00c0000.gpu: IRQ pp3 not found [ 0.128601] lima d00c0000.gpu: IRQ pp7 not found [ 0.133450] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 0.153194] dummy-irq: no IRQ given. Use irq=N [ 0.154964] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.168076] thermal thermal_zone0: binding zone soc with cdev thermal-cpufreq-0 failed:-22 [ 0.198267] remoteproc remoteproc0: request_firmware failed: -2 [ 0.200727] no UART detected at 0x1 [ 0.243451] meson-drm d0100000.vpu: meson_vclk_setup(0, 27000, 27000, 27000, 1) [ 1.389401] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0and log file with meson8m2-mxiii.dtb and meson8m2-mxiii-plus.dtb are same
SpoilerQA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25587 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12264 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218338 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: Fullspeed device found ! scanning bus for devices... dwc_otg: submit_control_msg: control status phase error (ret = -1) No USB Device found scanning bus for storage devices... 0 Storage Device(s) found ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 167 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-m8s.dtb 25398 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 board_usb_stop cfg: 0 Loading Kernel Image ... OK OK uboot time: 6418449 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff335 ... OK Starting kernel ... [ 0.119768] lima d00c0000.gpu: IRQ ppmmu3 not found [ 0.119896] lima d00c0000.gpu: IRQ ppmmu7 not found [ 0.124051] lima d00c0000.gpu: IRQ pp3 not found [ 0.128601] lima d00c0000.gpu: IRQ pp7 not found [ 0.133450] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 0.153194] dummy-irq: no IRQ given. Use irq=N [ 0.154964] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.168076] thermal thermal_zone0: binding zone soc with cdev thermal-cpufreq-0 failed:-22 [ 0.198267] remoteproc remoteproc0: request_firmware failed: -2 [ 0.200727] no UART detected at 0x1 [ 0.243451] meson-drm d0100000.vpu: meson_vclk_setup(0, 27000, 27000, 27000, 1) [ 1.389401] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 QA9:A;SVN:74E;POC:3FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0; no sdio debug board detected TE : 25587 BT : 10:46:23 Sep 25 2015 PMU:rn5t618 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC01 v:1100, 0x[36]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC02 v:1150, 0x[37]: 00 -> 2c -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 DC03 v:1500, 0x[38]: 00 -> 48 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO01 v:2900, 0x[4c]: 00 -> 50 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO02 v:1800, 0x[4d]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO03 v:1800, 0x[4e]: 00 -> 30 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO04 v:2850, 0x[4f]: 00 -> 4e -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO05 v:1800, 0x[50]: 00 -> 24 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0a v:2700, 0x[56]: 00 -> 28 -- i2c error, CTRL: 0798d019 -- i2c error, CTRL: 0798d019 LDO0b v:900, 0x[57]: 00 -> 00 -- i2c error, CTRL: 0798d019 CPU clock is 1200MHz CPU type: M8M2 DDR info: 2GB(auto) @ 792MHz(1T) DDR channel: DDR 0 + DDR 1 DDR init use : 12257 us HHH ucl decompress...pass 0x12345678 Boot from internal device 1st NAND TE : 218316 System Started U-boot-00000-g23a3562-dirty(m8_k200_v1@23a35625) (Sep 25 2015 - 10:46:14) clr h-ram DRAM: 2 GiB relocation Offset is: 6fec0000 show partition table: part: 0, name : logo, size : 2000000 part: 1, name : recovery, size : 2000000 part: 2, name : misc, size : 2000000 part: 3, name : boot, size : 2000000 part: 4, name : system, size : 40000000 part: 5, name : cache, size : 20000000 part: 6, name : data, size : end aml_card_type=0x100 MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6 [mmc_register] add mmc dev_num=1, port=2, if_type=6 SDIO Port B: 0, SDIO Port C: 1 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 PMU fault status: [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 -- N_OEPOF [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 reg[0x9A] = 0x81 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 LSI version:00, OTP version:00 PMU type:RN5T618 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_reads: i2c transfer failed, ret:-5 [RN5T618]rn5t618_writes: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 [RN5T618]rn5t618_read: i2c transfer failed, ret:-5 [RN5T618]rn5t618_write: i2c transfer failed, ret:-5 register usb cfg[0][1] = 7ff6fc9c register usb cfg[2][0] = 7ff731ac NAND: NAND BOOT: boot_device_flag 1 Nand PHY driver Version: 1.01.001.0004 (c) 2013 Amlogic Inc. amlnf_phy_init : amlnf init flag 0 NAND device id: 45 de 94 93 76 57 9 4 detect NAND device: A serials NAND 8GiB SDTNQGAMA-008G nand chip ce mask 1 AML_NAND_NEW_OOB : new oob bus_cycle=6, bus_timing=8,system=4.7ns,flash->T_REA =20,flash->T_RHOH=25 NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 0 NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 8, valid_page_addr = 13 i=0,register --- nand_key NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 115 nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane nfcode : offset: 0x000033000000 -0x000053000000 : partitons 5 : single_chip multi_plane nfdata : offset: 0x000086000000 -0x00017a000000 : partitons 1 : single_chip multi_plane bad block count = 0 bad block count = 0 bad block count = 0 bad block count = 0 amlnf_logic_init: START aml_nftl_start:117,size_in_blk=76,tmp_block=65,part->free_block_num=11 aml_nftl_start:117,size_in_blk=163,tmp_block=144,part->free_block_num=19 amlnf_logic_init: COMPLETE get_boot_device_flag: init_ret 0 get_boot_device_flag NAND BOOT: NAND BOOT,nand_env_relocate_spec : env_relocate_spec 49 uboot env amlnf_env_read : #### set_storage_device_flag: store 1 Multi dtb tool version: v2 . Multi dtb detected, support 6 dtbs. aml_dt soc: m8m2 platform: n200 variant: 2G dtb 0 soc: m8 plat: k200 vari: 2gsdhc dtb 1 soc: m8 plat: k200 vari: 2gsdio dtb 2 soc: m8 plat: k200 vari: sdhc dtb 3 soc: m8 plat: k200 vari: sdio dtb 4 soc: m8m2 plat: n200 vari: 1G dtb 5 soc: m8m2 plat: n200 vari: 2G Find match dtb: 5 vpu driver detect cpu type: m8m2 vpu clk_level in dts: 7 set vpu clk: 364000000Hz, readback: 364000000Hz(0x700) Net: Meson_Ethernet init suspend firmware done. (ret:0) cvbs trimming.1.v5: 0xa0, 0x0 cvbs performance use table = 0 vdac open.1 = 0x1, 0x0 config HPLL config HPLL done reboot_mode=charging efuse version is not selected. Hit Enter key to stop autoboot -- : 0 exit abortboot: 0 (Re)start USB(0)... USB: dwc_usb driver version: 2.94 6-June-2012 USB (1) peri reg base: c1108820 USB (1) use clock source: XTAL input USB (1) base addr: 0xc90c0000 Force id mode: Host dwc_otg: Fullspeed device found ! scanning bus for devices... dwc_otg: submit_control_msg: control status phase error (ret = -1) No USB Device found scanning bus for storage devices... 0 Storage Device(s) found ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** ** Invalid boot device ** sdio_detect return 1 [mmc_init] SDIO Port B:0, if_type=7, initialized OK! Device: SDIO Port B Manufacturer ID: 0 OEM: 0 Name: Tran Speed: 20000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7780433920 Boot Part Size: 0 Bus Width: 4-bit reading s805_autoscript 744 bytes read ## Executing script at 11000000 start amlogic old u-boot mode = 8 vic = 16 set HDMI vic: 16 config HPLL config HPLL done reconfig packet setting done reading uEnv.txt 174 bytes read reading /KERNEL 13944280 bytes read reading /dtb/amlogic/meson8m2-mxiii-plus.dtb 24824 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-5.6.0 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 13944216 Bytes = 13.3 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 board_usb_stop cfg: 0 Loading Kernel Image ... OK OK uboot time: 6298513 us. EFUSE machid is not set. Using machid 0xf81 from environment faild to get aml_reserved_end address the default relocate ramdisk and fdt address-relocate_addr: 0x20000000 Loading Device Tree to 1fff6000, end 1ffff0f7 ... OK Starting kernel ... [ 0.144704] dummy-irq: no IRQ given. Use irq=N [ 0.146437] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.156499] VCCK: failed to get the current voltage(-6) [ 0.156539] rn5t618-regulator rn5t618-regulator: failed to register DCDC1 regulator [ 0.195941] remoteproc remoteproc0: request_firmware failed: -2 [ 0.196630] meson-saradc c1108680.adc: failed to get vref regulator [ 0.204195] no UART detected at 0x1 [ 0.250540] meson-drm d0100000.vpu: meson_vclk_setup(0, 27000, 27000, 27000, 1) [ 0.403067] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 [ 0.406165] meson-saradc c1108680.adc: failed to get vref regulator [ 0.426656] meson-saradc c1108680.adc: failed to get vref regulator -
@balbes150 would you like to have log files here or another thread ? , both libreelec dtb m8s and mxii do not work for my box
-
wow nice to see , please i would like test libreelec , is the change back to ambian without problems ? i read that sometime people start libreelec and than have problems booting armbian again on 3.xx kernel
-
@Emulti It looks like you have a lot of experience with DTS/DTB, I'm still trying to activate my wlan chip(RTL8723) that runs on SDIO. I've already taken a lot of information from the DTS in the kernel 3.xx but it's still not recognized(IRQ ; GPIO; SELECT PIN). Have you already read or reached something in this direction ?
-
yes now all clear , sometimes blind on the eys
-
29 minutes ago, balbes150 said:
sorry but inside also only the dts like torvalds linux for odroid , mxiii, neox8 ; the dts for meson8m2-m8s missing
-
@balbes150please can i get the orginal dts file that you use for meson8m2-m8s.dtb from your 20.05 (kernel 5.6)
-
@balbes150 i did not get wifi work with dts/dtb files , when i use dts from github linux ( inclusive precompile with cpp) i always get "deferred probe " loop , with dtb(from image) to dts and than edit -> i got "SDIO MMC failed highspeed mode " .
it looks like many of the needed lines for wifi in meson8m2-m8s.dtb are there, like SDIO Slot 0 and Wifi32k Timer/PWM and ResetGPIO but still nothing show up ( i can not find all information because dtb to dts are not 100% same as orginal dts ).
also some option have negativ effects to the box
i needed 5 restart from the old 3.10 kernel image because of sdio timeout and gpio32 loops now works again i think i stay at old image till someone get onboard wifi work again in newer 5.x kernel version .
maybe you can get me the orginal dts (maybe precompile) file for m8s that is inside your image ?
-
be carfull it looks like for the new 4.xx(19.xx) and 5.xx(20.xx) Kernel Version from balbes150
-
Quote
It's booting from my SD Card and it works very good.
nice to hear
as far as i know there is no install to nand script
5 hours ago, Nikeb said:i don't have wifi driver
there are 3 different wifi chip AP6330 ; BCM4335 and RTL8723BS ;
please test in console
BCM-> "modprobe dhd" than "ifconfig"
dhd is Broadcom Dongle Host Drive
RTL-> edit "etc/modprobe/blacklist.conf" add "blacklist dhd" at the end "restart" than "modprobe 8723bs" and "ifconfig"
AP -> i have no idea when there is a driver
when wlan0 show up than edit "etc/modules-load.d/modules.conf" insert driver module name or insert "modprobe xxx" at "etc/rc.local"
maybe helps
-
@Nikeb both folderss are the same dtb files , you should use the dtb folder (without -30.10) , correct copy and rename single file do not edit uEnv.ini and wait at test around 5-10min , after finish test without postive result than only possible way is serial console and extract boot.img from android , or (with a small chance that it help )take a newer image 20.05 and SSH over Ethernet without hdmi
-
@Nikeb do not edit uENV.ini at older roms please , neo x8-H plus should be meson8m2-n200-xx.dtb files be aware the first boot maybe around 5-10minutes , when no one of this work than
you could only extract android boot.img from your preinstalled Android and ask balbes150 to seperate and convert the dtb from android to armbian ; but i think extract boot.img is only possible with root android and maybe twrp as recovery image , also you can get a serial to usb adapter and solder/connect it to the onboard Serial port than you can also look at linux boot message
-
the lastest old one is 5.77 with 3.10.108 and a desktop in the name , at 3.10.108 you have the dtb.img rename trick , at 4.19 and 5.xx Kernel you have toedit uENV.ini ; hope now it works
-
@nikeb first if the autoscript did not install also no sd or usb boot ; secound like my answer to nikron 20.05 you must edit uENV.ini not rename dtb also 20.05 have no HDMI !!!!!
maybe start with the 5.xx version (kernel 3.10) -> under OLD balbes150 ROMS
-
9 hours ago, nirkon said:
I see, thanks for clarifying.
OK I will try to connect ethernet and see if I get an IP to SSH to.
Though I think I need video output for my uses, I couldn't get it to work with the old kernel (hang on black screen), would the DTB files from 5.xx be able to work on 3.xx?
thanks
No thats not possible because they use different describe for everything,
-
@nirkon most all 5.x Kernel version (20.xx and NEXT) are without HDMI !! , its normal to have pixel logo because they only work with Ethernet(SSH) and/or Serial Console (SSH) also 5.x(20.xx ) and 4.x Version (19.xx) version need more time for first startup like 3 till 8 minutes , ( most times goes to timeframe 19.xxx secound and than you have to wait till login show up) ; for 20.xx and 19.xx version only need to edit uENV.ini !!.
at the old kernel 3.10 (version 5.xx) you need for hdmi the desktop versions and also have time for first start about 5 -10 minutes, this are the ones that use the rename to dtb.img trick !!
Armbian for Amlogic S805 and S802/S812
in Amlogic CPU Boxes
Posted
Thank you very much , works really good , rt8723bs is now detected , some more poblem maybe wifi driver or some gpio , but i am in contact with martin