RaptorSDS
-
Posts
270 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by RaptorSDS
-
-
vor 20 Stunden schrieb armbian-mxq:
mxqbox android
yes maybe with cpu-z , sometimes from mac-address
vor 20 Stunden schrieb armbian-mxq:monitor but not with tv
sometimes its also the tv that make overscan or underscan or like samsung they call it "zoom"
only limit controll to hdmi maybe uenv.txt there possible to set to 720p but i cannot say that exactly because most of the time i use headless
-
vor 21 Stunden schrieb george_1312:
root of the SD/USB
first not root the dtb.img on /boot/ ( the fat32 500mb partition)
on old right rename your dtb to dtb.img
on newer image like armbian 20.01 edit uenv.txt
-
vor 5 Stunden schrieb armbian-mxq:
changed my usb wifi adapter
i though you use the internal Wifi already
i cannot help witch external adapter
to internal adapter you have to 3 part
first dtb must set wifi to activate
secound dtb must have the right pins in wifi definition also the right state of pins (High ,Low, low pull down etc)
third the wifi driver have to be inside the image ( there are 3 or 4 diffirent adapter RT8723BS ,AP6220 and 1 or 2 others)
-
22 часа назад, george_1312 сказал:
m IC was the bootloader
your box has spi boot
most of the box have emmc / nand boot but also spi is possible
-
vor 15 Minuten schrieb george_1312:
one post per day
Yes that normal for new user (spam protection)
vor 15 Minuten schrieb george_1312:release for my M82 box
You should start with the older ones with 3.10.108 kernel this are most compatible because there are near android kernel
but i do not know how to extract bootloader or uboot from image direct to ROM chip
vor 17 Minuten schrieb george_1312:bootloader chip
thats the first time i read that this box have a seperate bootloader chip , normal all should be on the emmc/nand chip (boot / uboot, recovery, system,ext4)
-
vor 20 Stunden schrieb armbian-mxq:
Working dtb is meson8b-odroidc1 and meson8b-ec100 others simply don't work
thanks for info , i need some days because weekend get very busy , i try to get work on dtb on tuesday
-
vor 4 Stunden schrieb RyanX:
was about 4 months ago
wow very short memory
when you can boot from sdcard than a big step was finished
i have 3 diffirent box that run 24x7 in my home
get a new sd-card burn the armbian image on it
with old kernel (3.xx) than copy and rename your dtb from boot/dtb to dtb.img on /boot
with new kernel (5.xx) only rdit uEnv.txt and change there the name of dtb
( you have to test which dtb are work best with your box)
than boot and set up user password and tools ( you can use armbian-config for standart config like language wlan keyboard)
-
vor 6 Stunden schrieb george_1312:
is that possible? are there images ready for this king of work???
not this one's , mostly all are for Usb and SD-Card.
you can try but than you have to with manually edit some files and uboot and ....
(my box run now 4-5years with sd-card without problem)
be aware this box are get deep brick with wrong uboot on emmc/nand
there is no maskrom mode or any restore function in uboot
-
vor 15 Stunden schrieb armbian-mxq:
This dtb is from bullseye image /boot/dtb which i downloaded. I did not make any changes.
For large files, i did dd if=/dev/zero of=./test bs=1024 count=500000 but no errors in this case. if I cp this or wget a large file then also i get no errors. for a large file proceeds without any errors. I also get cpu big soft lockup 22s message of i use external usb to boot. In case of sd card, it simply remounts filesystem in ro even if i put ro=continue in fstab for rootfs. Strange but on e2fs -f on a different box with this sdcard there is no corruption. May be some buffer overflows?
I use apt upgrade as a root ooras a sudo. I also tried mounting external flash and symlink on /var/cache/apt still i get errors. Errors of inode start generally when download speed is high, say 15mbps or more. apt doesn't work in another thread because there is dpkg lock I guess sd card cant cope up with that though not sure.
but weird that both usb and sdcard produce errors
maybe also its some pin definition error from hdmi wich also produce error on memory or IO ports
Problem at the moment we havent a lead system programmer for this box , balbes the maintainer of s805/S812 switch to rockchip system
if you tell witch dtb you use i can maybe change some setting to disable HDMI complete
but i can only change a small amount of dtb not all
-
@armbian-mxq do you use the menson8b-mxq.dtb from 3.xx kernel on the 5.xx kernel ? -> thats didn`t work because kernel5 use some diffirent pin descriptions.
also many dtb was rewriten for kernel 5.xx thats why maybe hdmi did not work.
there could be some sd-card error because the SD-card driver was rewriten on kernel5 because of non-free code in the old sd-card driver. But than its shoulde be only high speed or low speed sd-card or non detect BUT that a filesystem was fine than readonly than fine -> this looks more like programm error not a driver issue
do you use apt-upgrade as normal user or root user ? or Is there another apt-upgrade thread at the same time?
-
vor 4 Stunden schrieb dotbg:
Nope! There are some kind of boxes claiming 8GB of RAM for example!
more like 8 Gbit or ram =1Gbyte ram ; or they have ram and rom swap or like some box its only fake advertise
please show the link to example
-
vor 2 Stunden schrieb erduk:
Hi there,
Many thanks for your efforts. I was able to boot your image with my MK808b plus device. I am planning to use it on my 3D printer for Octoprint/Klipper service.
However, I'm facing the same issue that I couldn't fix it on previous balbes150 images: onboard wifi device (AP6210) doesn't work.
I tried modprobe b43 and b43legacy didn't work out.
I used meson8b-ec100.dtb as dtb.img
For more information, I can use wifi on a prehistoric (ubuntu-mate-15-04-s805-standard-0_95_Beta.img.xz) image made by anonymous. but that built is way to old and I was not able to upgrade it to bionic to install uptodate python3.
Anyway, I hope someone could help me on that.
BR
erduk
If you use the newer Image 20.xx ( Kernel 5.xx) you have to edit uEnv , your rename of dtb.img is wrong !
also bionic i thing need kernel 4.xx and newer
-
i think its not possible to have docker in Armbian 5.67 because this has only a 3.10.108 Kernel . This Kernel was not and is not compatible to docker
-
on 5.77 and 5.44 there should be only two m8s dtb files , your choice is only small.
normally a there is a standard dtb ( i thing a mxii one) already on boot folder as dtb.img,
on 3.10.108 Kernel image you have to copy and rename your dtb to dtb.img on boot folder
some box still with right dtb have the HDMI plug problem , there was a patch with a HDMI plug dongle without cable
-
@AzuriAdore thanks for your work
-
-
ricoh rn5t618m is the power managment IC , if this is your main error than also a image can not help you
its look like you found the startup problem
if the power IC get wrong settings from image maybe a linux can help
When you get multiboot activate you can boot from SD or USB , you have not to fear to brick because orginal android is not touched
( get a orginal image is hard to find because of the varity of the box )
maybe someone else can jump in and have more ideas about the thermal problems
-
vor 8 Stunden schrieb AzuriAdore:
Hey everyone, I updated my guide on making Docker work here https://github.com/SLAzurin/armbian-aml-s8xx-kernel-build-steps
(For Ubuntu/Debian on linux version 5.10)
@balbes150 The previous comment for Docker requirements is wrong.
These here are the only config you need to enable to make Docker work when you build the linux kernel.
CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y
I hope you can add it successfully for the next release, thank you for your work.
i do not know if there will be a new build because balbes150 has stop working on this box , but on kernel GIT and linx GIT there still some person who fix things maybe you have to ask there.
-
vor 55 Minuten schrieb Charles Bauer:
Hi all!
I have bricked my new mx9 pro! hehe
I have installed armbian via stepnand and it does not show anything on the screen now. No signal!
I have tried to recognize it through otg cable but windows did not detect it.
Have you seen it?
I am not sure if the memory is nand. During the instalation I think it has said that is. But I am not completily right.
See below the photos of the board.
Any help will be appreciated because I want to buy another one and try again.
Thank you guy! your are awesome!
Charles Bauer
charlesbauer@gmail.com
please look at page 33 @jock and a @gnusmag45 have this topic about the JWA60 memory its a eMCP Memory
https://forum.armbian.com/topic/12656-csc-armbian-for-rk322x-tv-boxes/?do=findComment&comment=124401
-
vor 9 Minuten schrieb jock:
Thanks a lot!!
It looks like the board are exactly the same, probably they are clones of some sort: mine is labeled IPB900, yours T95N_RK3229. The external chassis has printed T95V Pro, fantasy names
I can see that the components, power regulators and soldering pads (leds, serial, diodes, ...) are placed in the same position and the soldering pads.
Can't remember if you already uploaded the original firmware or dtb, did you?
i have a backup of my android 6 (multiboot) but i do not had extract the dtb from Android -> some amazon reseller are als sold this box with android 8 ( but i have not found any update rom from android 6 to android 8 )
thats the one from me android 6
https://www.amazon.de/Neueste-Leelbox-Q2-Android-unterstützt-Schwarz/dp/B074PX2T9R
same box with android 8
https://www.amazon.de/Leelbox-Android-Volles-H-265-Version/dp/B07PHK9N31
last website from leelbox(i do not now if this original leelbox website , leelbox-tech is close )
https://www.leelbox.blog/tag/firmware-update/
some android 7.1
-
@jock its look like my Leelbox Q2 board in many ways , but my has AP6255 and the front LCD clock display
https://forum.armbian.com/topic/12656-csc-armbian-for-rk322x-tv-boxes/?do=findComment&comment=123806
-
vor 12 Stunden schrieb mexmet:
Thanx RaptorSDS
Now I can boot... yeesssss...
But I have now another problem.
I install OMV, and afteer that i can not fix eth mac adress.. Afteer every boot change mac adress, and ip adress. I set mac adreess in /etc/network/interfaces, but not solved the problem.
How can I fix that.?
short goog le and i found OMV has its own network-manager , all settings in interfaces will be ignore
you have to set all network things inside OMV
https://forum.openmediavault.org/index.php?thread/23034-network-manager/&postID=176055
-
vor 1 Stunde schrieb mexmet:
hi,
I have mxq s805
I create boot emcc with belana from Armbian_5.67_Aml-s805_Debian_stretch_default_3.10.108_20181207.img.xz
meson8b_mxq.dtb paste to root and renamed.
booteed..work fine..
Now
I want to try from
https://disk.yandex.kz/d/wc2jqGsHuKy48/Armbian/20.05.3/20200427
I tried same as but nothing happen, no boot no hdmi, no ethernet connection.
Shuuld write same as with belana or first write multiboot and paste this image to images folder?
hi and welcome
when Armbian 5.67 boot fine , multiboot is active.
for Armbian later 19.xx than you have to edit path and filename inside ambianEnv.txt. you do not not need copy and rename
-
vor 4 Stunden schrieb Charles Bauer:
Hi @RaptorSDS,
1 - I just have access to NAND boxes till now. As long as during our project we got other kinds We will write other tutorials. That´s what I expect to do.
2- I did not got what you mean. Should I format the SD card before writing multitool.img?
3 - I did not got what you mean. Shoul I change the order of the modifications? I used vi because it´s what I know.
Thanks for the feedbacks!
for 1 - ok only nand thats ok
for 2 - please ignore i did not know multitool can handle gzip/XZ/tar and that the fat partition should be bigger ( its was maybe a bug that my sdcard had only 800mb fat partition)
for 3 - i work most of the time in CLI so "nano" it what i know feel free to use "vi" , thats my personal thought to change order and modifcate armbianEnv.txt direct after "rk322x-config"
Armbian for Amlogic S805 and S802/S812
in Amlogic CPU Boxes
Posted
on fnlink webpage are only some for sdio and BT4 option
http://www.fn-link.com/product_list.html?designTemplateId=1&t=1566202507675&isPreview=true#w_common_text-1563534094486
it could be a rt8723BS clone or the SV6158
for RT8723BS , blacklist dhd than modprob 8723bs (in modules, because you have to restart) on old kernel should be do the trick