Jump to content

RaptorSDS

Members
  • Posts

    270
  • Joined

  • Last visited

Everything posted by RaptorSDS

  1. Thanky for the Info about Zip/Gzip/XZ format , i use belanerEtcher for writing multitool image to SD-card
  2. nice work some comments 1. i do not know if you get all box from same manufactor ( or if manufactor use always NAND) , maybe you have to show also eMMC install 2. after flash multiboot.img i had only 800mb partition (enought for "buster minimal.img" ) i had to boot it once because resize of fat32 partition than i got enought space for "buster desktop.img" 3. its maybe easyer to change armbianEnv.txt direct after rk322x-config , when a user unintend reboot the box you have the cpu-stability modifcation on . ( you can use "sudo nano" inside CLI for edit files)
  3. please look at page 34 @fabiobassa and @ArkhanLK with @jockspeak about Mali400 driver and Desktop with HW-Video and some problems
  4. @Charles Bauer wow nice project to achieve a good performance for Browser and YouTube is not easy way my experience with raspberry 3b and as image DietPi, Raspbian or Ubuntu (Wireless over 5GHz or 100 Mbit link) as browser I test chromium and Firefox and some small browser all configuration I used has a lack of media acceleration because of missing free-GPU driver and the bottleneck of SD-Card (sometimes also lack of RAM) most of the time I can open only max 3 Tabs than it gets very slow , youtube only 360p or less (360p i got only 15fps ) ( my smartphone moto g5 2GB Ram has 10 Tab in chrome and did not get slower; my wife's laptop has 30 tabs in Firefox and Firefox used only 2GB Ram for this) I did not test this rk3229 chip, but I thing because of missing free MALI-driver it maybe have same issues I hope you get a better performance I also work more on the hardware side as on software but for my browser experience I switch to a rk3328 box with android and a chrome browser
  5. thanks for that fast reponse after 2 more crash i also change governer to "schedule" -> my box sitting now at 1 ghz at 55 degree and is fine now (about 4h) before i saw that every http request request the cpu to up to all 4cores 100% for 1sec and also fast switch of cpu frequency and temp (50degree to 65 degree )for the 1sec after that goes down to 600mhz , maybe the fast up and down related to the issue thanks for the info about apps
  6. i am on mainline kernel 5.10 i had befor set cpu from 400MHz to limit 1.2GHz max -> to limit thermal output after that kernel panic i switch back to 600Mhz to 1.39GHz ( after kernel panic armbian-config has no 400Mhz option) now its little bit better (could a app like php3 , nginx, mariadb do a kernel panic like above ? ) but i hope i will not be get worse
  7. i do not know if something change in last apt upgrade for rk332x root or image but i got today kernel faults and emmc problem emmc problems like the one i report when i config emmc in armbianEnv.txt my box tell me 398% CPU usage kernel panic kernel:[ 519.498786] Internal error: Oops: 805 [#1] PREEMPT SMP ARM Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.645677] Process kworker/0:3 (pid: 1159, stack limit = 0x6b325425) Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.652911] Stack: (0xb38ffc80 to 0xb3900000) Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.657808] fc80: 200e0013 00000001 b38ffcac b38ffc98 b103e600 b01879f4 b1d04938 00000001 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.667000] fca0: b38ffcd4 b38ffcb0 b089a0d0 b103e5f0 ffffffff b0899f80 00000001 b38ffd08 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.676192] fcc0: b1d11824 00000000 b38ffd04 b38ffcd8 b014ba44 b0899f8c b1d05b40 b1d11800 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.685385] fce0: b1780e90 b1c05e40 b1606808 00000001 00000000 b4737080 b38ffd3c b38ffd08 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.694577] fd00: b088ce80 b014b9d8 b1d05b40 23c34600 30a32c00 d4a8b198 b088f660 b1c05e40 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.703770] fd20: b1c05e40 00000000 00000001 b1c05300 b38ffd5c b38ffd40 b088cf4c b088ce04 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.712962] fd40: b1c05e40 b1c05240 00000000 00000001 b38ffd7c b38ffd60 b088cf10 b088ceb0 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.722155] fd60: b1c05240 b1c05300 00000000 00000001 b38ffd9c b38ffd80 b088cf10 b088ceb0 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.731348] fd80: b1d1ca80 b1606808 30a32c00 30a32c00 b38ffddc b38ffda0 b0892dd4 b088ceb0 Message from syslogd@rk322x-box at Jun 17 21:45:02 ... kernel:[ 519.740539] fda0: 30a32c00 00000000 ffffffff 30a32c00 b1d04000 d4a8b198 b38ffddc b30fadc0 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.592688] [<b0892e54>] (clk_set_rate) from [<b0c21ae0>] (dev_pm_opp_set_rate+0x28c/0x588) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.602072] r5:30a32c00 r4:b81ae800 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.606113] [<b0c21854>] (dev_pm_opp_set_rate) from [<af0970a4>] (set_target+0x38/0x3c [cpufreq_dt]) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.616380] r10:00000000 r9:00000000 r8:00000001 r7:00000000 r6:b18a0a8c r5:b1606808 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.625174] r4:b48c2200 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.628042] [<af09706c>] (set_target [cpufreq_dt]) from [<b0c277d8>] (__cpufreq_driver_target+0x1bc/0x540) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.638895] [<b0c2761c>] (__cpufreq_driver_target) from [<b0c2b7d0>] (cs_dbs_update+0xd8/0x14c) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.648674] r10:b1800a20 r9:00000000 r8:b4a6f5c0 r7:b4a73600 r6:000cd140 r5:b48c2200 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.657469] r4:b4a73100 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.660334] [<b0c2b6f8>] (cs_dbs_update) from [<b0c2bd44>] (dbs_work_handler+0x3c/0x64) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.669333] r9:00000000 r8:b17c03e0 r7:b48c2200 r6:b4a73104 r5:00000000 r4:b4a73148 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.678047] [<b0c2bd08>] (dbs_work_handler) from [<b0142bc4>] (process_one_work+0x224/0x60c) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.687535] r9:00000000 r8:00000000 r7:eedd7d00 r6:eedd4980 r5:b1fcd280 r4:b4a73148 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.696254] [<b01429a0>] (process_one_work) from [<b0143018>] (worker_thread+0x6c/0x584) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.705354] r10:eedd4980 r9:b1604900 r8:eedd49a4 r7:00000008 r6:eedd4980 r5:b1fcd294 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.714151] r4:b1fcd280 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.717017] [<b0142fac>] (worker_thread) from [<b014a12c>] (kthread+0x19c/0x1b4) Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.725335] r10:b1de1e68 r9:00000000 r8:b1fcd280 r7:b0142fac r6:b3096000 r5:b1fe7000 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.734130] r4:b1fcd200 Message from syslogd@rk322x-box at Jun 17 22:03:33 ... kernel:[ 63.736993] [<b0149f90>] (kthread) from [<b0100148>] (ret_from_fork+0x14/0x2c)
  8. @jock i have a small request is it possible to get a 4 led config ? i got with Ledconfig 1 -power =first red than red and blue on ( i thing its not good for Led) -kernel = blue on -power off = red and blue on ledconfig 2 -power =red on -kernel = red on ,blue disk work status -power off = red on ledconfig3 -power = red on -kernel = red off , blue off my request ledconfig4 power= red on kernel = red off, blue on also after ledconfig3 the box did not get back to ledconfig1 mode at reboot only with power off ledconfig3 to ledconfig2 work with reboot
  9. @beretas i think 70-91 degree is not a unnormal reading , my box get idle 60 degree , load at 80 degree , @jock and other already told me that normal , also my other rockchip 3328 box idle at android at 40-50 degree load above 70-90 degree i also have a amlogic box M8S with a S812 cpu there idle around 30 degree and load at 50 degree but first step to get linux on this box is little bit complex.
  10. hi and welcome there is no a to z guide how to get linux to the box because like i wrote before therer a big mix of diffirent boxes ( 3 diffferent wifi chip , 3 or 4 different Lan chip) also most of the armbian community only work with and on open source or community Software. ubuntu is a linux armbian is ubuntu linux or debian linux with tools and setup for small space envoirments its possible to run this box as a slow NAS ( only USB2 support ; most of the box only has 2.4GHz Wlan N ) ; Plex or Media box still a problem because the media recode is not optimal ( lag of graphic driver) i thing on page 24...26 i wrote some steps ( but feel free to write a guide ) be balbes150 has stop his work on this Amlogic Armbian release but there are some work on the linux Kernel for AMLOGIC chipset but its slow . there are 3 main steps 1. get the bootloader unlock for multiboot with the aml_autoscript.zip from Android or from TWRP 2. get the armbian on a SD-Card ( beleanerEtcher or ImageWrite32 ) 3 get the right setup to boot linux ( dtb files)
  11. @jock also emmc-nand produce the error , i can boot only without any of the 3 settings
  12. for 2 i do other way i underclock the cpu because of my opinion too hot cpu @jock i got my box to a 100% load on all 4 cores from bug webservice its run at 85 degree stable with 1.2Ghz ( i dont know why last time ( first time with linux after switch from android) at 75 degree the box freeze and short after black screen maybe it wasnt a thermal problem . for 3. i have same problem with UUID , but for me its was only to delete the emmc or nand or emmc-nand part from the armbianENV, the rk3229 and the ledconfig1 parts work great.
  13. i found the leelbox blog with a image for my box attached dtb and dts , and dts with child -@ rk-kernel.dts rk-kernel.dtb rk-kernel2.dts
  14. @fabiobassa thanks for fast answer , i know some tools from amlogic when android still at internal memoryy ->read boot partition , extract file , convert dtb to dts . but i have no instruction for read boot partition from a image ( and no i have no orginal image leelbox-tech.com is only a placeholder) , i have also no clou how read that from backup file my infrared thermo meter say also around 45-50 degree , also my finger say it get warm
  15. i did not want back to android , the box works great with linux . is there a way to extract dtb from backup file ? i attached the pic of the board
  16. Hallo team first thanks for the good work i am now a long time active with balbes150 on the Amlogic S805/S812 forum side , but last week i bought two Rockchip box for small amount . i am very happy for this good support on this box my box Leelbox Q2 Pro RK3229 2gb ddr3 / 16GB emmc , Ap6255 but i have two problems first is that both trigger of the rk322x-config tool ->emmc and nand are stop the initramfs script to boot the box i always get stuck that the uuid of emmc is missing or incorrect , without the emmc or nand config the box works great !!!! secound the high idle temperature of the box , i have long time a M8S Box with a Amlogic S812 and the idle temp is around 30-35 celcius , this rockchip box are idle at around 55-60 celcius , some load and the box hit the 75 celcius and shut down ( also the other rockchip box with rk3328 idle around 55 celcius on android) is that normal or do i have a faulty chip ? both problem on latest buster minimal 20.04 kernel 5.10 and bionic desktop 20.04 kernel 5.10 rom i dont use the lagecy kernel 4.4 rom because i didnt not get wifi running
  17. @Ruf73 Please do not use the android dtb for Linux , there are compatible but not all work proper. on the sd-card there should be also a m8m2_n200_2G_sdio.dtb please use the files from SD-card ( but you wrote the box is a M8 S802 , but m8m2_n200 is more like a m8s S812 box , wifi is a broadcom modul )
  18. @Ruf73 Thank you for being a little more detailed this time for 5.44 and 5.77 both use the 3.10 kernel which is identical to the Android 4.4 kernel so there are many boxes running with the default settings that 5.44 only runs with HDMI and with less memory is due to the fact that not exactly all settings are working after flashing the SD_card should have 2 partitions 1. boot 2.Linux in the 1. partition Boot files must be changed depending on the version as follows: for 5.44 and 5.77 you have to change the dtb.img file on the SD Card after flashing with the correct file from the subfolder this must be copied and renamed as dtb.img in the main directory of the boot partition. for 20.xx images, due to the new kernel, only the link in the file uENV.txt is changed to the correct file in the subfolder of the boot partition of the SD card. ! some boxes always need a HDMI cable ; ! the dtb file tells the kernel what , how , and where is available in the box but also the kernel and the Linux must also be able to handle it therefore it is not possible to move a working dtb file from 5.77 to 20.xx.
  19. @xaleks First there is no A to Z guide how to make this android to linux box , because there are many diffirence between the box . feel free to write one Download link to the Armbian version I need to try and dtbs I should attempt to use? somewhere in this thread armbian.com/linux/balbes ( last 3 pages) How to boot from the SD card (I assume this is the tooth pick method)? toothpick is only to get to recovery partition / recovery tool you also have to find a way to install the aml_autoscript , this script activte the multiboot option on bootloader for usb and sd-card boot ( i had to sideload TWRP from sd-card to temporary recovery and than replace recovery with twrp, install the aml_autoscript and also root the box) Where to solder a uart bridge (I'm using my bus pirate for this) for uart? look at the lower section on your picture. Are there the mark for RX;TX and GND ? maybe look at the other side of the board ! ; What is a bus pirate ? you need a uart rs232 to usb ( be aware you need maybe 3,3V UART adapter ) that enough, dtb there are some in the armbian boot section for testing , there is also a mxii.dtb
  20. @menelike i look at the dts file for 5.xx kernel and see many i2c channels are state disable but rtc is still enable , i think that system try to reach the rtc but without i2c is like disconnect , @SteeMan i think the problem is more that some vendor have sometime change where thinks connected rtc somtimes on i2c_AO sometimes on i2c_A ; and that many thinks are still diable in the mainline kernel dts files because the dev didn have time or have not hardware to test all ,
  21. from where do you have the dts file for 5.10 Kernel ? what happen if you also disable RTC clock , its also possible thats i2c problem because pcf8563 has i2c interface for GPU is normal to have no reserve memory because strucktur of dts / dtso are now --> kernel / main chipset/ chipset / devices like my my m8s -->kernel 5.xx / meson.dts / menson8.dts / menso8m2_m8s.dtso the reserve memory can also be descripte in menson.dts
  22. on all USB Ports ? do you use Wifi ? or Ethernet , do have any tmp or swap file configure on SD card ?
  23. first active multiboot ( maybe root or change of recovery image need) next write image on sd-card next chose dtb files maybe you have search/test for right one boot the image from sdcard
  24. all image the old armbian 5.xx with 3.xx Kernel and also the many(all 20.1x) new image 20.xx with 5.xx have the rtl8723bs driver inside , but the different kind of the S8xx chipset and s9xx chipset box make it hard to have the right pin for the right board with the right wififchip ( some information the s812 has 3 different wifi chips ap6330 rtl8723bs and a third one = hard to tell wich M8S label box has wich wifi chip ) next think is that the dtb ( that is the files that descripte the box) has change from 3.xx kernel to 5.xx kernel because 5.xx kernel are useable for a wide area of devices (some Information the 3.xx kernel dtb file has possible to set 3 state (high, low ...) of a pin the new kernel i thing 5 state ( high , low , low activ, high activ ....) ) so we need more information about your box ( we have S805 +rt8723bs like : wich old kernel work with wifi , wich pin is for wifi enable from old 3.xx kernel dtb , wich dtb from 5.xx kernel work now and so on
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines