gleam2003
Members-
Posts
28 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Everything posted by gleam2003
-
I find that rsb is used in place if i2c. I have an old board and like old orengepi one plus and the new orangepi 3 lts they dosen't boot with rsb. I modify the DTS for use i2c and the board boot. I think that this rsb bus is buggy
-
"Gave up waiting for root file system device."
gleam2003 replied to TMA-1's topic in Allwinner sunxi
I build legacy kernel 5.10.121 and system boot fine. Kernel 5.10.121 use i2c. I try to edit dtb and replace rsb wit i2c but system doesn't boot at all (on current kernel) I don't understand why orangepi 3 lts use i2c and we can't use the same with this board -
"Gave up waiting for root file system device."
gleam2003 replied to TMA-1's topic in Allwinner sunxi
I compile linux in buildroot with all armbian patch (5.10, 5.15) and try with different uboot and atf and I have the same problem. Also I use the libreelec/lakka patch with buildroot and the board boot always without issue with linux kernel 5.10.109. (uboot+atf+crust) -
I can't test with other sd, I a have only 3 sdhc memory and all have same issue. I compile linux in buildroot with all armbian patch (5.10, 5.15) and try with different uboot and atf and I have the same problem. Also I use the libreelec/lakka patch with buildroot and the board boot always without issue with linux kernel 5.10.109. (uboot+atf+crust)
-
I have similar problem with OrangePi One Plus and Armbian 22.02 First boot work ok, after resize and configure if reboot the image dosen't boot because can't mount root fs. If I use 21.05 all work fine. I can suppose it's like this: I have other board with H3 and H5 and the problem dosen't affect this models
-
I use the patch and compile the image with the armbian. Compilation is ok. There isn't tve overlay to use, i don't know if it's necessary. I power on the board with the image builded and Image work and I can connect via SSH but no image output. I also test to add tve overlay to image, add tve to dts overlay Make file. I now have the dtbo tve file but adding it to overlay don't give me the solution, no image output. If I use old kernel (with fex) image output via CVBS works. UPDATE: add the patch for enable tve overlays kernel-sunxi-current.patch
-
Can you share the solution. I have only white display
-
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
Finaly build with no error with this deb: http://ftp.br.debian.org/debian/pool/main/q/qemu/qemu-user-static_5.1+dfsg-3_amd64.deb -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
The error with qemu old version happen on both, native or virtual. The error after update qemu to 5.0 happen on vagrant, for now I don't test on native. -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
Now I have this error on end of build process: -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
http://security.ubuntu.com/ubuntu/pool/main/q/qemu/qemu_5.0-5ubuntu6_amd64.deb Installed this on focal and now work -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
where find compiled quemu 5.1.0 for focal? I test to build but have error when link with "--static" -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
Can I add that in past with old version of armbian on Ubuntu 16.04 the problem dosen't exist. Qemu version in this case, if I'm not wrong, is 2.5 -
rfc customize-image.sh using git clone error
gleam2003 replied to gleam2003's topic in Armbian build framework
I tried with Bionic and have the same issue. Yes, is probably Qemu problem, I have the same problem if I chroot manually and try to do the same thing. In Focal qemu version is 3, in Bionic qemu version is 4 and I have the same problem. I compile the version 5 on Focal but I can't successefull build the static version with softemmu. I will test the 5 from unstable branch on Bionic -
In my customize-image.sh I need to dowload source via git and make it like user and not like root. Example of customize-image.sh: git clone https://github.com/xxx/xxx /home/pi/xxx su -c "sudo -S /home/pi/xxx/xxx.sh" - pi This work when I build image for OrangePi4 (and all other rk3399 board) It dosen't work when build image for sun8i board like OrangePi Lite. Both git and su command return error and compilation fail. This happen with legacy and mainline kernel, with ubuntu or debian.
-
Anyone can help me to find what I need to modify in u-boot for reach 1.2ghz cpu clock. I know that I can have some troubles with this clock but I use only 1 or 2 CPU core and already test this clock with old legacy kenrel without thermal or power issues.
-
There's a way to change the framebuffer display resolution / refreshrate? Via HDMI my display work at 1920x1080 at 25Hz, i need to set it to 60Hz
-
H2: Sunvell R69 Android TV Box (AliExpress)
gleam2003 replied to vlna's topic in Allwinner CPU Boxes
I can confirm that with this mod eMMC now work and I can use the nand-sata-install -
H2: Sunvell R69 Android TV Box (AliExpress)
gleam2003 replied to vlna's topic in Allwinner CPU Boxes
You think is sufficent to make this change to drivers/mmc/core/mmc.c in kernel? if (card->ext_csd.rev > 7) { if (card->ext_csd.rev > 8) { -
H2: Sunvell R69 Android TV Box (AliExpress)
gleam2003 replied to vlna's topic in Allwinner CPU Boxes
I have already one R69 and no problem to access to eMMC and use NAND install script with an Legacy kernel Image. Now I bought 2 new box and from the same image I can't access to eMMC in any way If I use mainline kenrnel no problem, but my work for now only work on Legacy kernel. [ 1.543692] mmc0: new high speed SDHC card at address 59b4 [ 1.544181] mmcblk0: mmc0:59b4 USD00 14.9 GiB [ 1.545566] mmcblk0: p1 [ 1.546152] mmcblk mmc0:59b4: Card claimed for testing. [ 1.546167] mmc0:59b4: USD00 14.9 GiB [ 1.547746] [mmc]: sdc2 power_supply is null [ 1.622884] mmc2: unrecognised EXT_CSD revision 8 [ 1.622900] mmc2: error -22 whilst initialising MMC card [ 1.623020] [mmc]: sdc2 power_supply is null [ 1.626080] [wifi_pm]: get wifi_sdc_id failed [ 1.627121] [mmc]: sdc2 power_supply is null [ 1.660056] usb 6-1: new low-speed USB device number 2 using sunxi-ohci [ 1.717076] mmc2: unrecognised EXT_CSD revision 8 [ 1.717089] mmc2: error -22 whilst initialising MMC card [ 1.717203] [mmc]: sdc2 power_supply is null [ 1.721302] [mmc]: sdc2 power_supply is null